Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

CONNECTOR, PLUG, ELECTRICAL

Awarded
SPE7M5-26-T-318CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a single electrical plug connector, identified by part number 48774 and NSN 5935-01-627-6706, with a quantity of 17 units. The item is classified as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must strictly follow DLA’s RP001 regulations and MIL-STD-129 for marking and labeling, with hazardous material handling governed by TQ requirement IP025 if applicable; otherwise, commercial packaging must conform to ASTM D3951. Delivery is FOB origin with a 168-day lead time, scheduled for January 5, 2027, with an original required delivery date of January 17, 2027. No quantity variance is permitted. Inspection and acceptance occur at the destination point, specifically at DLA Distribution Warner Robins, Building 376, Robins Air Force Base, Georgia. The contract is issued under solicitation SPE7M5-26-T-318C and is subject to DLA transportation and shipping protocols as outlined in DLAD Proc Notes C19 and C20. The unit of issue is each, with a total price of $289.00 based on a unit price of $17.00.

General Info

Solicitation for 17 electrical connectors due July 20, 2026, via DIBBS, no set-aside, U.S. delivery.

Contract Value

$4,573

NAICS

335931 - Current-Carrying Wiring Device Manufacturing

Place of Performance

GA, USA

Set-Aside

NONE

Award Issued Date

Documents

2

RFQ SPE7M5-26-T-318C for DLA Land and Maritime

PDF, High priority: read this firstrfq
High

SPE7M526V6526.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseAwarded
Posted

Solicitation

Notice updated

NAICS code added: 334417. The notice description changed. The point of contact changed.

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Office AddressUSA

Full Description

Show more
DLA award SPE7M526V6526 posted on DIBBS. Awardee: REV-CAP COMPANY, INC. (CAGE 0HS46) Total Contract Price: $4,573.00 Award Date: 08-05-2026 Solicitation: SPE7M5-26-T-318C Line items: - CONNECTOR, PLUG, ELECTRICAL (NSN/Part 5935016276706, PR 7017439205)

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
SLEEVE, REINFORCING, HOS
Solicitation # SPE7M4-27-T-1204
Solicitation SPE7M4-27-T-1204 is a federal procurement issued by the DLA Weapons Support Fluid Handling Division for 134 units of reinforcing hose sleeves, identified by NSN 4720009291105. The items feature a 5-25/64 inch inner diameter and a nominal length of 6-1/8 inches. This is a critical application item with a non-extendable shelf life of 48 months. The procurement is designated as a Service-Disabled Veteran-Owned Small Business set-aside cascade. Delivery is required within 23 days after the order, with a need ship date of November 19, 2026, and a final required delivery date of July 24, 2027. Shipping is FOB Origin to DLA Distribution San Diego. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically using special marking code 32 for shelf life. Technical requirements are governed by the DLA Master List, and the items must not contain intentionally added mercury. Inspection and acceptance will occur at the destination. Payment and receiving reports must be processed electronically through the Wide Area Workflow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 325520
New
DIBBS
RESIN EPOXY
Solicitation # SPE8ES-27-T-0148
Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.
Adhesive Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS