Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONNECTOR, PLUG, ELECTRI

Active
SPE7M5-26-T-398WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 195 electrical plug connectors with NSN/Part Number 5935-01-008-2404, issued under solicitation SPE7M5-26-T-398W by the Department of Defense’s Active Devices Division. All items must be manufactured by an approved source using materials explicitly cited on the referenced drawing, and quotes must strictly adhere to these specifications. The delivery timeline requires fulfillment within 137 days after award, with performance to occur at Robins AFB, Georgia. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition size and timing of solicitation amendments. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. Ozone-depleting chemicals are strictly prohibited in any part of the product or manufacturing process, and any substitute chemicals require prior approval unless already authorized by the specification. Any configuration changes or deviations require an engineering change proposal or formal variance request. Point of contact for inquiries is Corey Carter at corey.carter@dla.mil or 614-693-0310.

General Info

Procure 195 approved electrical connectors by 137 days post-award to Robins AFB, comply with DLA specs, no ozone-depleting chemicals.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-398W for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Corey Carter
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,PLUG,ELECTRICAL
CONNECTOR,PLUG,ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
"QUOTES MUST BE BASED UPON FURNISHING AN ITEM
MANUFACTURED BY AN APPROVED SOURCE AND FROM AN
APPROVED MATERIAL CITED ON THE DRAWING
REFERENCED BELOW. THE CITED DRAWING SPECIFIES
WHICH MATERIALS ARE ACCEPTABLE AND PROVIDES NSN/Part Number: 5935-01-008-2404 Quantity: 195 EA Purchase Request: 7017440553QTY: 195 Delivery: 137 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Copper Alloy Metal Bar SupplyThe contract calls for the supply and delivery of 108 feet of copper alloy 630 metal bar, with a tolerance of plus or minus 10 percent, ensuring the final quantity falls within an acceptable range. The bar must have a diameter of 1.375 inches and be finished using both hot and cold processes to meet the precise requirements of the SAE AMS4640J specification. All materials must be properly packaged and clearly marked in accordance with federal shipping standards to ensure safe and traceable transport. The delivery destination is DLA Distribution in New Cumberland, Pennsylvania, with the zip code 17070-5002 specified as the place of performance. The material is classified under NAICS code 332112, indicating it falls within the forgings and stampings manufacturing sector, and the contract is structured as a subcontract under the Department of Defense, specifically managed by the DDSP NEW CUMBERLAND FACILITY. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing vendors a 11-day window to submit proposals.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Precision Metal Bar Manufacturing – Nickel Alloy 400 Hexagon Bars
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Manufacture and Delivery of Helical Compression SpringsThe contract requires the precision manufacturing, quality assurance, packaging, and delivery of 58 helical compression springs with the National Stock Number 5360-00-514-4470, fully compliant with military specifications including MIL-STD-2073-1E and all Defense Logistics Agency requirements. The work must be executed to exacting standards ensuring dimensional accuracy, material integrity, and performance under operational conditions typical of defense applications. Packaging must meet stringent military packaging guidelines to safeguard the springs during transit and storage, and delivery must be coordinated to meet the specified timeline and location requirements. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the place of performance designated as Greensboro, North Carolina, 27409. It was posted on August 9, 2026, and responses are due by August 20, 2026. The North American Industry Classification System code 332112 indicates the work falls under spring manufacturing. The solicitation is identified by the reference number SPE7MC26T186M, and all deliverables must be submitted in full compliance with DLA’s procedural and technical directives to ensure acceptance and payment.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2047
This procurement specifies copper alloy bar stock in hexagonal shape with a width of 1.000 inch across flats, manufactured to H04 temper and designated by part number 482, with a reference weight of 3.160 pounds per foot and lengths between 6 and 14 feet, delivered in whole-foot increments only. The material must conform to ASTM B21/B21M-20 and ASTM B249/B249M-23 standards and require a Certificate of Quality Compliance with each shipment, including mill material certification to be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification number and revision, alloy, grade, class, type, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be stamped or stenciled in legible, waterproof, and durable characters that do not contaminate the material, with adhesive labels acceptable for smaller diameter bars. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods following ASTM B900 and marking consistent with MIL-STD-129R, including special designations for unique requirements. The contract enforces strict adherence to the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official DLA Troop Support QSLD to receive awards; deviations must be explicitly declared, and non-compliant bids are subject to rejection and potential criminal penalties. Source inspection requirements are waived for qualified suppliers under this solicitation, relieving them from COQC, PVT, QAP-EQ003, and ASQ H1331 obligations. The product must meet all dimensional, temper, and alloy specifications as defined in the Technical Data Package revisions referencing ASTM and SAE standards. Shipment is to be delivered FOB origin to the designated DLA warehouse in Tracy, California, with a delivery window of 164 days from the original required delivery date of December 5, 2026, and a quantity allowance of plus or minus 10 percent. The contract requires full compliance with all CDRLs including CDRL-METALSCERT, and all documentation must reference the correct NSN 9530001671901 and Purchase Request 701775
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2059
The contract specifies the procurement of Nickel Alloy 400 bars in cold-drawn, stress-relieved condition, with a hexagonal cross-section measuring 0.938 inches across flats and lengths ranging from 6 to 20 feet in whole-foot increments, weighing approximately 2.920 pounds per foot. The material must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and is subject to qualification under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed on the QSLD are eligible for award; any deviation from this requirement must be explicitly declared. The product must be accompanied by a Certificate of Quality Compliance with each shipment, and continuous identification markings on every unit are mandatory, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, durable, and non-contaminating manner. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special marking and preservation codes Z and ZZ as defined by ASTM A700, and all units must be palletized according to RP001. Continuous identification is required on each bar, and adhesive labels are permitted for items under 0.250 inches in nominal outer diameter. The delivery is FOB origin, with an acceptance point at destination, and a 10% quantity variance is allowed. The required delivery date is November 28, 2026, with a final ship date of February 1, 2027, and the material must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. All documentation, including CDRL-METALSCERT, must be submitted, and failure to meet any requirement may result in rejection or criminal penalties for unauthorized substitution.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2065
This contract specifies the procurement of aluminum alloy 2024 in T851 temper, supplied as round drawn bars with a diameter of 6.500 inches and lengths between 10 and 12 feet, delivered in whole-foot increments only, with a reference weight of 38.983 pounds per foot. The material must fully comply with SAE AMS-QQ-A-225/6B and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23, and is designated as a critical application item requiring strict conformance. Each unit must bear continuous identification markings including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling without contamination or degradation of the material. Adhesive labels are required for small-diameter bars, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including preservation methods per ASTM B660 and marking per MIL-STD-129R with the special code ZZ. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliant bids must explicitly state the deviation. Products delivered under this contract must be sourced exclusively from QSLD-approved distributors unless otherwise authorized in writing by the government; unauthorized substitutions may result in criminal penalties. Certificate of Quality Compliance with mill material certification is mandatory with each shipment and must be forwarded to the DLA Troop Support Contracting Officer. The contract waives source inspection requirements for QSLD-compliant suppliers, except for Foreign Military Sales, and supersedes other quality conformance inspection clauses. Deliveries are FOB origin, with a 20-foot quantity allowable within ±10% variance, inspection and acceptance occurring at destination, and delivery required within 164 days of contract award, with a scheduled need date of February 1, 2027. All shipments must be addressed to DLA Distribution Warner Robins at Robins AFB, Georgia, in compliance with DLA procurement notes and transportation guidelines, and include dual-unit markings if applicable.
WARNER ROBINS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-14PR
The contract pertains to the procurement of 194 machine bolts with NSN 5306-00-069-3019 under solicitation SPE4A6-26-T-14PR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 20 days after award, and the solicitation was posted on August 9, 2026, with responses due by August 17, 2026. The item is procured as fully competitive in accordance with applicable military or federal specifications, and the technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance will occur at the origin, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but individual item unique identification is not mandated per the Service customer’s request, consistent with DFARS 252.211-7003(c)(1)(i). Measuring and test equipment standards must be adhered to, and the NAICS code 332112 designates the industrial classification for this procurement. All inquiries should be directed to Priscilla Holmes at the provided contact information.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7MC-26-T-186M
The contract pertains to the procurement of 58 helical compression springs identified by NSN 5360-00-514-4470, issued under solicitation SPE7MC-26-T-186M by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and delivery is required within 165 days after award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All supplies must comply with strict prohibitions on mercury and mercury-containing compounds, which cannot be intentionally added or come in direct contact with the hardware, except for specific approved uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and performance is to occur in Greensboro, North Carolina, with primary point of contact Nicole Betts reachable via email and phone provided.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
FILTER ELEMENT, AIR
Solicitation # SPE8E8-26-T-5116
The contract pertains to the procurement of three air filter elements with NSN 4130-01-560-6308 and part number CC-3000-CVN-77, supplied by EDDY PUMP CORPORATION under solicitation SPE8E8-26-T-5116. Delivery is required within 20 days of award, FOB destination, with no tolerance for quantity variance. The items must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and must be packaged per MIL-STD-129 and RP001 packaging guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof design and dual containment per NAVSEA 5100-003D. Packaging must mark and label in accordance with DLA standards using the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere to DLA procurement protocols. Shipment must bypass parcel post and use the fastest traceable transport method to the vessel delivery address for USS SAN DIEGO LPD 22, with tracking reference RDD 777 and transporter details provided. The required delivery date is April 17, 2025, and the contract mandates strict adherence to defense information handling protocols and government-only access codes.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3404
This contract specifications call for nickel alloy 400 metal bars, cold drawn and shaped in a hexagon with a width of 0.750 inches across flats, offered in whole-foot lengths ranging from 6 to 20 feet, with a linear weight of 1.870 pounds per foot. The material must conform to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including the applicable specification SPE8E9-26-T-3404, Section B, and must be accompanied by a Certificate of Quality Compliance with every shipment, submitted both to the receiving depot and to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and dimensions, using approved methods such as stenciling or stamping that do not contaminate or impair the product. Adhesive labels are required for bars under 0.250 inches in nominal diameter, and tags are acceptable for wire, with noncompliance constituting grounds for rejection. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared. The government waives source inspection requirements for QSL-compliant suppliers, eliminating the need for COQC, PVT, QAP-EQ003, and ASQ H1331 inspections. Packaging must adhere to MIL-STD-2073-1E and RP001, with preservation methods following ASTM A700 and marking requirements complying with MIL-STD-129, including the use of special codes Z and ZZ for preservation and labeling. Vinyl or plastic-coated pressure-sensitive labels are permitted for structural shapes and banded lifts, and shipment markings must display both units of measure if applicable. The contract is for 37 feet of material at $37.00 per foot, with a total price of $1,369, delivery FOB origin, inspection and acceptance at destination, and a required delivery date of February 1, 2027, with a 10 percent quantity variance allowed. The material is designated as a critical application item, and all documentation including the Technical Data Package and CDRL-METALSCERT must be furnished in accordance with referenced standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-398X
The contract is for the procurement of 198 electrical cable clamps identified by NSN 5935-01-103-5835 under solicitation SPE7M5-26-T-398X, issued by the Department of Defense’s Active Devices Division. The item must be delivered within 105 days of award, with performance taking place in New Cumberland, Pennsylvania. All pricing must include data required by the DLA packaging requirements, and suppliers are obligated to provide one Certificate of Quality Compliance per manufacturing lot, aligned with the Supplemental Quality Assurance Provision. Each certificate must accompany the shipment and be made available for Government inspection at the time of delivery if the contract is under Government inspection at source. Suppliers must electronically upload each COQC into the iRAPT system as an attachment to the Receiving Report for Government records, and the Government representative may approve the receiving report via WAWF once documentation is properly submitted and verified. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 332112, and primary point of contact is Tate Shannon at the provided DLA email and phone number.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-14MN
The contract pertains to the procurement of 50 machine screws with part number BACS12CK3-10 and NSN 5305-01-051-0624, sourced from approved suppliers including Valley-Todeco Inc, SPS Technologies LLC, Howmet Global Fastening Systems Inc, Federal Manufacturing Corp, and Boeing Defence Australia Ltd. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which supersede all other standards unless otherwise stipulated. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. Configuration changes require formal engineering change proposals and variance requests. All items must be packaged per ASTM D3951 and labeled per MIL-STD-129 in accordance with DLA Packaging Requirements, with palletization governed by RP001. The unit of issue is each (EA), with no tolerance for quantity variance, and delivery is FOB origin. Inspection and acceptance occur at destination. The required delivery date is March 15, 2027, with a delivery window of 166 days from the contract award. The procurement is managed under solicitation SPE4A6-26-T-14MN, issued by the Department of Defense, with primary point of contact Sibel Claywell. Shipping instructions and transport protocols must adhere to DLAD Proc Notes C19 and C20, with delivery directed to the DLA Distribution Depot in Tinker AFB, Oklahoma.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous materials in full compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 standards. This effort is critical to ensure proper identification, handling, and communication of hazards associated with materials used or supplied under the agreement, with strict adherence to federal regulatory requirements for workplace safety and defense contracting. All documentation must be accurate, up to date, and formatted in accordance with the specified guidelines to meet military and occupational safety protocols. This subcontract, issued by the Active Devices Division of the Department of Defense, falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to safety and regulatory compliance. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The performance location and point of contact details are not specified, but the work must be executed to support the defense supply chain’s safety and regulatory obligations. Interested parties must respond through the designated DIBBS system portal before the deadline to be considered for award.
Environmental Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, marking, and labeling services strictly in compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all military-grade requirements are met for the storage, handling, and transport of equipment and materials. This includes accurate bar-coding for logistics tracking and proper hazardous material labeling as mandated by applicable regulations, with full attention to detail to support military supply chain integrity and safety protocols. All work must be performed under the specifications of these standards without exception to ensure seamless integration into Department of Defense logistics systems. The contract is classified as a subcontract under NAICS code 493190 and is issued by the Active Devices Division of the Department of Defense. It was posted on August 9, 2026, with responses due by August 20, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, and performance location details are not provided, indicating flexibility in execution site as long as deliverables meet federal standards. The contractor must be fully prepared to handle the technical and regulatory demands of military packaging and labeling, with an emphasis on precision, compliance, and documentation accuracy throughout the process.
Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
Electronic Shielding Gasket ManufacturingThe contract pertains to the manufacture and delivery of three units of EMI shielding gaskets, identified by NSN 5999-01-680-5759 and part number PG632000-05, all of which must fully comply with Department of Defense technical and military specifications. The work is classified as a subcontract under NAICS code 334419, indicating it falls within the category of other electronic component manufacturing. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Active Devices Division under the Department of Defense. There is no specified set-aside type, and the place of performance and point of contact details are not provided in the data, though all deliverables must meet the stringent standards required for military applications. The contract is accessible via a public DIBBS platform link for further submission and reference.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Transportation LogisticsThe contract requires the transport of finished connector assemblies from the manufacturer to DLA Distribution in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the buyer assumes responsibility once the goods leave the manufacturer’s location. All transportation must comply with U.S.-flag vessel requirements when sea transport is involved, ensuring adherence to maritime regulations and domestic shipping mandates. The work is classified under NAICS code 484220 for support activities for truck transportation, indicating the primary focus is on logistics coordination rather than manufacturing. As a subcontract awarded by the Department of Defense’s Active Devices Division, this effort supports critical defense supply chain operations. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is intended for subcontractors participating in a broader logistics arrangement. The place of performance is clearly identified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and while no specific point of contact is listed, the contract can be accessed via the DIBBS procurement portal. No set-aside provisions are specified, meaning all eligible contractors may respond. This contract emphasizes timely and compliant delivery of sensitive defense components, requiring precise coordination across domestic and international shipping lanes while meeting U.S. maritime laws for oceanic segments of the supply route.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 811212
New
DIBBS
MIL-STD-129 Marking and BarcodingThis contract requires the application of MIL-STD-129 compliant marking and barcoding to all shipments, ensuring that both hazardous and non-hazardous items are properly labeled with machine-readable barcodes and standard shipping labels as mandated by U.S. Department of Defense standards. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is classified as a subcontract under NAICS code 811212, indicating a focus on commercial and industrial machinery and equipment repair and maintenance services. Responses must be submitted by August 20, 2026, with the opportunity posted on August 9, 2026, through the DIBBS portal under solicitation number SPE7M526T399N. The contracting entity is the Active Devices Division within the Department of Defense, and the requirement is critical for ensuring uniformity, traceability, and compliance in military logistics and supply chain operations.
Computer and Office Machine Repair and Maintenance

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339920
New
DIBBS
MIL-SPEC Packaging and Preservation ServicesThe contract requires the provision of packaging and preservation services for connector assemblies that fully comply with MIL-STD-2073-1E and MIL-DTL-55330 specifications. This includes implementing dry climate control measures to protect components from moisture damage, applying preservation method ZZ for long-term corrosion resistance, and ensuring all unit containers meet the stringent D3 requirements for durability, labeling, and environmental protection during storage and transit. The work must be performed to exact military standards with documented verification of compliance at every stage of the packaging process. Deliverables are to be supplied to the Department of Defense’s Active Devices Division, with performance occurring at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is structured as a subcontract under NAICS code 339920, and responses must be submitted by the deadline of August 20, 2026. The contract focuses exclusively on technical adherence to military packaging specifications, with no indication of set-aside provisions or specific small business preferences, and the primary emphasis is on quality control, documentation, and strict conformance to all referenced military standards.
Sporting and Athletic Goods Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
Manufacture of Qualified Electrical Connector AssembliesThe contract requires the manufacture of 58 military-spec electrical plug connectors designated as NSN 5935010411338 and model MS3406D18-1E, fully compliant with SAE AS50151 and AS34061 standards and qualified under the QPL H01 listing. All units must meet stringent environmental regulations prohibiting the use of mercury and ozone-depleting substances to ensure regulatory and operational compliance. The connectors are intended for defense applications and must be produced to exacting technical specifications to guarantee performance under extreme conditions. The solicitation, issued by the Department of Defense’s ACTIVE DEVICES DIVISION, is classified as a subcontract with a response deadline of August 20, 2026, and was posted on August 9, 2026. The North American Industry Classification System code is 334417, indicating the scope falls under semiconductor and other electronic component manufacturing. Performance is required at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, though no specific point of contact or set-aside details are provided. All submissions must be made through the DIBBS portal using the provided UI link.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 312230
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires the packaging, preservation, and marking of electrical connectors in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all components are protected against environmental degradation through the use of moisture barriers and desiccants. Serialized traceability labels must be applied to each item to support full lifecycle identification and inventory control. Work must be performed at the designated place of performance in Jacksonville, Florida, with delivery and compliance obligations tied to the response deadline of August 20, 2026. This is a subcontract opportunity under NAICS code 312230, issued by the Department of Defense’s Active Devices Division, and is intended for contractors capable of meeting stringent military-grade packaging and documentation requirements without deviation.
Tobacco Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized services to provide hazard warning labels and compliance documentation for hazardous materials used in packaging, with strict adherence to OSHA’s Hazard Communication Standard, the Globally Harmonized System of Classification and Labeling of Chemicals, and the Defense Federal Acquisition Regulation Supplement requirements. All deliverables must meet federal regulatory standards to ensure safe handling, transport, and use of hazardous substances within Department of Defense supply chains. The work is performance-based and requires accurate labeling, multi-language compliance materials, and documentation that aligns with current regulatory frameworks and DoD procurement policies. Performance of this subcontract is specifically tied to Jacksonville, Florida, with a response deadline of August 20, 2026, and an issuance date of August 9, 2026. The North American Industry Classification System code 541690 indicates this is for other scientific and technical consulting services, highlighting the expertise needed in regulatory compliance and hazardous materials management. The contracting activity falls under the Active Devices Division of the Department of Defense, emphasizing the critical nature of these services for defense-related equipment and systems. Suppliers must demonstrate proven experience in meeting federal compliance standards and delivering accurate, traceable, and auditable labeling systems tailored to military logistics environments.
Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334332
New
DIBBS
Electrical Connectors Supply (NSN 5935010589244)The contract calls for the supply of 1,157 units of electrical connectors identified by NSN 5935010589244, requiring full manufacturing or sourcing capabilities to meet military specifications. The scope includes comprehensive quality assurance protocols, proper packaging and labeling in accordance with defense standards, and guaranteed delivery timelines to the designated performance location in Jacksonville, Florida, with zip code 32212-0103. All work must align with applicable military requirements ensuring reliability, durability, and interoperability in operational environments. The solicitation is structured as a subcontract under NAICS code 334332, reflecting the electronic component manufacturing sector, and is administered by the Active Devices Division within the Department of Defense. The opportunity was posted on August 9, 2026, with a firm response deadline of August 20, 2026. Bidders must be prepared to comply with all defense logistics and contractual obligations tied to the DLA’s procurement framework, and must submit proposals via the designated DIBBS platform before the closing date to be considered.

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract seeks the development and submission of Globally Harmonized System-compliant hazard labels and safety data sheets for hazardous components, aligned with OSHA’s 29 CFR 1910.1200 requirements. This subcontract is issued by the Active Devices Division under the Department of Defense, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, targeting vendors with expertise in regulatory compliance documentation for hazardous materials. The North American Industry Classification System code 541690 indicates this work falls under other scientific and technical consulting services, emphasizing specialized technical support rather than manufacturing or distribution. All deliverables must meet federal safety standards to ensure accurate hazard communication for military and defense applications.
Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Assessment SupportThe contract seeks support for achieving and maintaining Cybersecurity Maturity Model Certification (CMMC) Level 2 readiness, with a strong focus on fulfilling the requirements of NIST SP 800-171 and ensuring compliance with DFARS 252.204-7012. This includes assistance with conducting a comprehensive self-assessment, implementing necessary security controls, documenting policies and procedures, and preparing for third-party audits. The work is targeted at organizations handling controlled unclassified information and requires proven expertise in defense contractor cybersecurity frameworks, with an emphasis on practical, actionable guidance to bridge gaps in current security postures. Performance is expected to be delivered in support of the Department of Defense’s Active Devices Division, with the primary location of performance at Tinker Air Force Base, Oklahoma. As a subcontract, this effort is intended to augment existing contractor capabilities and must be executed within the specified response deadline of August 20, 2026. The North American Industry Classification System code 541512 indicates the work falls under computer systems design and related services, underscoring the need for technical proficiency in cybersecurity infrastructure, governance, and risk management tailored to federal defense environments.
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details