This Solicitation opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CONNECTOR, RECEPTACL
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract specifies the procurement of a connector receptacle with NSN 5935-01-069-8105, quantity of three units, to be delivered within 20 days under solicitation SPE7M5-26-T-359G. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the use of any Class I ozone-depleting substances in its design or manufacturing is strictly prohibited without explicit written approval from the Contracting Officer. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-55330 for connectors, with marking following MIL-STD-129 and no special marking codes applied. Inspection and acceptance occur at the origin point, with zero non-conformances required in sampling under MIL-STD-1916 or comparable zero-based plans, and critical attributes are subject to the most rigorous verification levels. The item is designated as a critical application item with approved part numbers from multiple qualified suppliers including Texas Instruments, Airborn Interconnect, Winchester Interconnect, APTIV Services, and Lockheed Martin. Delivery is FOB origin to a designated military facility in Nantou County, Taiwan, with no variance allowed in quantity. All packaging, shipping, and handling must comply with hazardous materials protocols, and the contract references multiple DLA procedural notices for freight forwarding and transportation. The contract data indicates an active federal solicitation managed by the Department of Defense’s Active Devices Division, with a response deadline in August 2026 and an original required delivery date of August 4, 2026.
General Info
Place of Performance
TWNSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
CONNECTOR,RECEPTACLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TEXAS INSTRUMENTS INC 73803 P/N FF0701-40
AIRBORN INTERCONNECT, LLC 10400 P/N WTB40PR7SY342
WINCHESTER INTERCONNECT CORPORATION 95238 P/N XMRP40PD911X-50NI
APTIV SERVICES 3 (US), LLC 53669 P/N PCALP040D66A
LOCKHEED MARTIN CORPORATION 04939 P/N 717801103-002
SPE7M5-26-T-359G
SECTION B
PR: 7017688670 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017688670 0001 EA 3.000
NSN/MATERIAL:5935010698105
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-55330, FOR CONNECTORS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BTWH00
ORDNANCE READINESS DEVELOPMENT
CENTER
JIJI TOWNSHIP
NANTOU COUNTY 55243
TW
MARKFOR
BTWH00
ORDNANCE READINESS DEVELOPMENT
CENTER
JIJI TOWNSHIP
NANTOU COUNTY 55243
SPE7M5-26-T-359G
SECTION B
PR: 7017688670 PRLI: 0001 CONT’D
TW
M/F: (TCN) BTWH5362082366
RDD: 266
PROJ: TP 2
SUPP ADD: BA4BER SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: B04 ADV: 2L FC: YY
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE7M5-26-T-359G NSN/Part Number: 5935-01-069-8105 Quantity: 3 EA Purchase Request: 7017688670QTY: 3 Delivery: 20 days ADO
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS