Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTOR, RECEPTACL

Active
SPE7M5-26-T-338MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a connector, receptacle with NSN 5935-01-660-1337 and part number RM232-080-111-6600, in a quantity of two units. Delivery is required within 20 days from the contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and must be marked according to MIL-STD-129 with no special marking codes applied. Palletization must adhere to DLA packaging requirements. The shipment is to be sent via the fastest traceable means, explicitly prohibiting parcel post, to the designated receiving location at Marine Aviation Logistics Squadron 11 in San Diego, California. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue or award date depending on acquisition size. The contract is issued under solicitation SPE7M5-26-T-338M, with a response deadline of August 3, 2026, and a required delivery date of July 16, 2026. The point of contact is Margaret Smith of the Department of Defense’s Active Devices Division, and the item falls under NAICS code 334417.

General Info

Procure two RM232-080-111-6600 connectors, deliver by July 16, 2026, to San Diego, per MIL-STD packaging and DLA requirements.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

PO BOX 452040 MCAS MIRAMAR, SAN DIEGO, CA, 92145-2040, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,RECEPTACL
CONNECTOR,RECEPTACLE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
AIRBORN INTERCONNECT, LLC 10400 P/N RM232-080-111-6600
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017554752 0001 EA 2.000
NSN/MATERIAL:5935016601337
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:FA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
SPE7M5-26-T-338M
SECTION B
PR: 7017554752 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R09111
MARINE AVIATION LOGISTICS SQDN 11
MAG 11 3D MAW FMF
PO BOX 452040 MCAS MIRAMAR
SAN DIEGO CA 92145-2040
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R09111
MALS 11 RECEIVING OFFICER
SSD 858 577 1451
BUILDING 7209 BAY DOOR 19
SAN DIEGO CA 92145
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R0911161910934
RDD: 777
PROJ: AE5 TP 2
SUPP ADD: YSTOCK SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: FC: KZ
Need Ship Date:00/00/0000 Original Required Delivery Date:07/16/2026
SPE7M5-26-T-338M NSN/Part Number: 5935-01-660-1337 Quantity: 2 EA Purchase Request: 7017554752QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract pertains to the procurement of an electrical plug connector identified by NSN 5935008789916 and part number MS3108R16-12S, with a requirement for nine units at a unit price of $9.00, totaling $81.00. The item must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including qualification under the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. Physical identification and marking must follow SAE AS31081 Revision B and SAE AS50151 Revision E, with packaging and marking conforming to MIL-STD-2073-1E and MIL-STD-129 without special markings. Delivery is FOB origin within 20 days of contract award, with no quantity variance allowed, and inspection and acceptance occur at origin. The item must be packaged using prescribed methods, including dry preservation and standardized container types, with shipping directed to the Ordnance Readiness Development Center in Nantou County, Taiwan. The solicitation number is SPE7M5-26-T-337Y, with a response deadline of August 3, 2026, and the original required delivery date is July 24, 2026. The contract is managed by the Department of Defense’s Active Devices Division, with Margaret Smith as the point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract specifies the procurement of a plug-type electrical connector identified by NSN 5935-01-128-3608, with a firm fixed price and a quantity of one unit per line item, totaling two identical entries. The item must comply with military specification MIL-DTL-55302G and its revisions, and is classified as a qualified product subject to the Qualified Products List requirements outlined in procurement note H01 for Federal Stock Class 5935. The use of ozone-depleting substances in any phase of design, manufacturing, or cleaning is strictly prohibited unless explicit written approval from the contracting officer is obtained, and this prohibition overrides any conflicting specification requirements. All packaging and labeling must adhere to MIL-STD-129 and DLA packaging requirements, with hazardous materials packaged per Fed-Std-313 and IP025, while non-hazardous items follow ASTM D3951 unless superseded by higher-priority DLA technical requirements. Palletization must conform to RP001, and the unit of issue is each. Delivery is required at the destination in South Korea, with shipments directed to Bldg S2002, CP Humphreys, Pyeongtaek, and must be completed within 20 days after award date. Inspection and acceptance occur at the destination, with no tolerance for variation in quantity. The contract is issued under full and open competition, and the item is designated for government use with specific tracking identifiers, project codes, and shipping instructions tied to the transportation and delivery logistics outlined in DLAD procedural notes.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
PLATE, RETAINING, ELE
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract specifies the procurement of a connector, receptacle with NSN 5935-01-721-8829, quantity of three units, under solicitation SPE7M2-26-Q-0658, with a firm fixed price and zero variance allowance in quantity. Delivery is required within 150 days after award, with FOB origin and inspection and acceptance occurring at destination. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, using specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special marking codes. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. The contract incorporates stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including configuration change management, source approval documentation, and physical identification standards. It prohibits the intentional use of mercury or mercury-containing compounds unless explicitly exempted for functional applications such as batteries or sensors, and requires secondary containment for portable mercury-containing devices. Use of Class I ozone-depleting substances is strictly forbidden in all manufacturing and processing stages unless written approval from the contracting officer is obtained, with exceptions for commercial items or part-numbered-only components. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The technical data package revision is tied to drawing 16-AUV314-02 dated April 1, 2023, and all requirements must be met without deviation unless formally authorized.
NUCLEAR REACTOR PROGRAM

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract solicits two units of a connector, receptacle with NSN 5935-00-985-2020 under solicitation number SPE7M0-26-T-014S, with a required delivery within five days of award. All supplies must comply with DLA packaging requirements, and technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment superseded it. The offeror must provide a complete data package including documentation for both the approved and alternate parts, as no data is currently available. Physical identification and marking of the bare item are required, and any government identification on non-accepted supplies must be removed prior to delivery. The place of performance is Fort Benning, Georgia, 31905, and the contracting office is under the Department of Defense, Maritime Supply Chain esoc Buys. Responses are due by August 3, 2026, and the point of contact is Gerard Quinn, reachable at 6146927750 or gerard.quinn@dla.mil.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract specifies the procurement of two electrical connectors, receptacle type, with part number KJA7T25W8PDL and NSN 5935-01-521-3387, under solicitation SPE7M5-26-T-338G. The items must be delivered within 20 days to the designated destination in San Diego, California, with FOB origin terms and no tolerance for quantity variance. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, prioritizing those over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling, including palletization per RP001. Hazardous materials must meet FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged per ASTM D3951 unless superseded by DLA requirements. Physical identification and removal of government markings from non-accepted supplies are mandatory per RQ011 and RQ017. Delivery must occur via traceable means excluding parcel post, as specified in DLAD PROC NOTES C19 and C20, with a required delivery date of July 16, 2026. The contract outlines a unit price of $2.00 per unit, totaling $4.00. All shipments must be addressed to R09111 at MALS 11 Receiving Officer, Building 7209, Bay Door 19, San Diego, CA 92145, and include the designated project and supplier identifiers. The purchase request number is 7017554750, and government-use codes are designated for internal tracking.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, EThe contract pertains to the procurement of a connector, receptacle, electrical item designated by NSN 5935-01-254-8189 and part number M83723/71W1006N, with a required quantity of two units to be delivered within five days of award. The item is subject to strict technical and quality controls under the DLA Master List of Technical and Quality Requirements, including mandatory compliance with MIL-DTL-83723H and its supplements, and is classified as a qualified product requiring adherence to the Qualified Products List for FSC 5935 connector assemblies. The item must not contain any Class I ozone-depleting substances unless explicitly approved in writing by the contracting officer, and mercury or mercury compounds are prohibited from intentional addition or direct contact with the hardware, except in specified functional applications such as batteries, fluorescent lights, sensors, or weapon systems, with additional containment requirements for portable devices. Packaging must conform to DLA-specific standards under RP001, including MIL-STD-129 labeling, commercial packaging per ASTM D3951 if non-hazardous, or Fed-Std-313 if hazardous, with palletization strictly following DLA guidelines. The item must be shipped via the fastest traceable method—parcel post is explicitly forbidden—and delivered FOB origin to the Department of Commerce NOAA facility in Lakeland, Florida. The contract mandates zero variance in quantity, inspection and acceptance occur at destination, and all documentation must align with the referenced specifications and revision dates as of the solicitation issue date.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONTACT, ELECTRICALThis contract specifies the procurement of an electrical contact part, identified by NSN 5999-01-235-0402 and manufacturer part number 1591906-1 from Honeywell International, Inc., with a quantity of 79 units to be delivered FOB origin. Delivery is due within 171 days of the award, with the original required delivery date set for April 12, 2027, and a needed ship date of January 17, 2027. The items must comply with stringent packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit containment details. Marking must conform to MIL-STD-129, with a special designation for “Delicate instrument,” and palletization must adhere to DLA packaging requirements. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Quality assurance is governed by tailored higher-level requirements for both manufacturers and non-manufacturers, with sampling methodology mandated under MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, requiring zero non-conformances unless otherwise directed. Critical attributes are assigned the highest verification levels and strict AQL thresholds. The contract incorporates all referenced technical and quality requirements listed in the DLA Master List, and the revision in effect at the solicitation issue date controls unless amended. All documentation, delivery, and transportation instructions are to be followed per DLA procedural notes, with the final delivery address located in Anniston, Alabama.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334220
New
DIBBS
ADAPTER, CONNECTORThe contract is for three adapter connectors with NSN 5935-01-201-4810 under solicitation SPE7M5-26-T-338W, issued by the Department of Defense’s Active Devices Division. Delivery is required within 10 days of award, with a response deadline of August 3, 2026, and performance to occur at Fort Irwin, California, zip 92310-9986. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and DLA authorization may access the controlled data. The procurement is subject to DLA packaging requirements and mandates that the vendor hold CMMC Level 2 certification through a certified third-party assessment organization. The primary point of contact is Tate Shannon, reachable via email and phone listed in the contract data.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThe contract pertains to the procurement of five electromagnetic relays with NSN 5945-01-332-9930 and part number 801174-1 from Engineered Magnetics, Inc. Delivery is required within 20 days of contract award, with FOB origin terms and no variance allowed in quantity. The items must comply with stringent packaging requirements per MIL-STD-2073-1E, including specific preservation methods, packaging levels, and unit containment standards, and must be marked per MIL-STD-129 with special code ZZ for additional requirements. Each unit package must be labeled per IPC/JEDEC J-STD-609 to clearly identify lead content and finish attributes, with markings placed according to the standard’s specifications. Inspection and acceptance occur at origin, and sampling for quality verification follows MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contract incorporates all technical and quality requirements cited in the DLA Master List of Technical and Quality Requirements, with compliance controlled by the version in effect on the solicitation issue date. Shipment is directed to the Turkish Armed Forces facility in Eskisehir, Turkey, through the freight forwarder A.J. Worldwide Services, with all government-specific logistics identifiers and tracking codes provided for official use. The solicitation number is SPE7M5-26-T-338U, with a response deadline of August 3, 2026, and the original required delivery date is July 24, 2026.
Relay and Industrial Control Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
CONTACT KIT, ELECTRIThe contract pertains to the procurement of a Contact Kit, Electric, identified by NSN 5999-01-459-7269, with a quantity of one unit under purchase request 7017399385. Delivery is required within ten days after contract award, and the solicitation number is SPE7M5-26-T-338V, with a response deadline of August 3, 2026. The procurement falls under NAICS code 335999 and is managed by the Active Devices Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contractor must comply with DLA packaging requirements and ensure physical identification of the item as specified, including marking procedures for bare items. Additionally, if government identification is present on non-accepted supplies, it must be removed prior to delivery. The alternate offeror is required to submit a complete data package with full technical documentation for both the approved and alternate parts. Primary point of contact for the solicitation is Margaret Smith, reachable via email and phone provided.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGEThe contract specifies the procurement of a single type of cartridge fuse, part number F09B250V3AS, compliant with MIL-PRF-15160 and listed on the Qualified Products List, with no commercial substitutes permitted without prior written government approval. The fuse must feature silver-plated end caps as indicated by the “S” designation in the part number and be marked precisely according to section 3.14 of the military specification. Strict prohibitions are in place against the use of any Class I ozone-depleting substances in any phase of design, manufacturing, testing, or cleaning, overriding any conflicting specification requirements unless the contracting officer grants separate written authorization. Technical documentation must align with Rev A Gen 1 of the TDP under MIL-PRF-15160L dated May 12, 2022, and all packaging must adhere to DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951 where applicable. Packaging must be labeled and marked in accordance with MIL-STD-129, palletized per RP001, and shipped via traceable freight methods—parcel post is explicitly prohibited. The item is to be delivered FOB origin within 20 days, with zero tolerance for quantity variance, inspected and accepted at destination. The NSN 5920-00-295-8662 is for three units, with delivery directed to Nellis Air Force Base, Nevada, under solicitation SPE7M5-26-T-337Z, with an original required delivery date of July 17, 2026. The contracting office is the Department of Defense’s Active Devices Division, and all compliance and quality assurance obligations are binding under federal procurement rules.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
REGULATOR, CURRENTThis contract pertains to the procurement of one unit of a current regulator with NSN 5963-01-562-2068, supplied by CUMMINS POWER GENERATION INC. under purchase request 7017559862, with a delivery requirement of five days from the origin point under FOB terms. The item is classified as ESD-sensitive electronic device, necessitating strict compliance with MIL-PRF-81705 for both electrostatic discharge and electromagnetic interference protection, utilizing specified barrier materials from qualified manufacturers listed on QPL-81705. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 marking standards, including the special marking code 39 for ESD sensitivity, with additional requirements for cushioning and containment to prevent physical damage to leads and terminals. All packaging materials and handling procedures must be executed at approved ESD/EMI protective workstations. The item is to be delivered to Fort Stewart, Georgia, with shipment required via traceable freight methods, explicitly prohibiting parcel post. The contract references DLA’s Master List of Technical and Quality Requirements for all applicable R and I specifications, with revisions controlled by the solicitation issue date. The supply must meet exact quantity tolerances of plus or minus zero percent and is subject to destination inspection and acceptance. Special handling is mandated for preservation, packaging configuration, and interior container standards, with intermediate packaging details defined as DO with no specified quantity. The contract is issued under solicitation SPE7M5-26-T-338F, with a response deadline of August 3, 2026, and an original required delivery date of July 22, 2026. Government use codes and distribution identifiers are provided for internal tracking and logistics coordination.
Semiconductor and Related Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVICE, D
Semiconductor and Related Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGE
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
LIGHT EMITTING DIOD
Semiconductor and Related Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details