Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTOR, RECEPTACLE, E

Active
SPE7M5-26-T-334WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two electrical connector receptacles identified by NSN 5935-00-500-5443 and specified part numbers from approved vendors including Lockheed Martin, Amphenol Corp, and ITT Cannon LLC. The items are subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with RP001 DLA Packaging Requirements, MIL-STD-129 labeling, and TQ requirement IP025 if the item is hazardous per FED-STD-313; otherwise, commercial packaging in accordance with ASTM D3951 applies. All packaging and palletization must adhere strictly to DLA specifications, and items must be marked with proper identification per RQ017. Delivery is required within 20 days FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The items must be shipped via traceable freight methods, not parcel post, to the designated Sheppard AFB delivery address. The contract is issued under solicitation SPE7M5-26-T-334W with a required delivery date of July 15, 2026, and a response deadline of July 30, 2026. The unit of issue is each, priced at $2.00 per unit for a total of $4.00, under a federal procurement framework governed by DoD standards.

General Info

Procure two electrical connector receptacles, DLA-compliant packaging, deliver by July 15, 2026, $2 each, FOB origin.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

1231 BRIDWELL RD BLDG 2113, SHEPPARD AFB, TX, 76311-2149, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M5-26-T-334W

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,RECEPTACLE,ELECTRICAL
ITEM NAME CONNECTOR,RECEPTACL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
LOCKHEED MARTIN CORPORATION 38597 P/N 81-18-2A28-12P
AMPHENOL CORP 77820 P/N 97-3102A28-12P53
AMPHENOL CORP 77820 P/N 97-3102A28-12P532
ITT CANNON LLC 71468 P/N CA3102R28-12PF32
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017522891 0001 EA 2.000
NSN/MATERIAL:5935005005443
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
SPE7M5-26-T-334W
SECTION B
PR: 7017522891 PRLI: 0001 CONT’D
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB3020
FB3020 82 LRS LGRTDDC
CP 940-676-5297
1231 BRIDWELL RD BLDG 2113
SHEPPARD AFB TX 76311-2149
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB3020
FB3020 82 LRS LGRTDDC
CP 940-676-5297
1231 BRIDWELL RD BLDG 2113
SHEPPARD AFB TX 76311
US
M/F: (TCN) FB302061900577
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE7M5-26-T-334W NSN/Part Number: 5935-00-500-5443 Quantity: 2 EA Purchase Request: 7017522891QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
Precision Connector Manufacturing & AssemblyThe contract calls for the manufacture and assembly of 12 units of MS3452W18-18P military-grade circular electrical connectors, adhering strictly to MIL-DTL-5015H, SAE-AS50151E, and MS3452D specifications, ensuring compatibility and reliability for mission-critical defense applications. Each unit must meet exacting performance, environmental, and mechanical standards required for use in harsh operational environments, with full traceability and quality control documentation expected throughout production. The work is categorized under NAICS code 334417 and is structured as a subcontract under the Department of Defense’s Active Devices Division, with performance required at Tracy, California, 95304-5000. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, indicating a tightly scheduled procurement cycle focused on rapid delivery of certified components.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Supply of MIL-SPEC Qualified Electrical ConnectorsThe contract involves the procurement of 71 units of a plug-type electrical connector identified by NSN 5935012304862, which must fully comply with the MIL-DTL-38999/26G and MIL-DTL-38999N technical specifications. All suppliers must be certified under the Qualified Products List or Qualified Manufacturer List to ensure adherence to military-grade performance and reliability standards. Certain branded products are explicitly prohibited from consideration during specified timeframes to maintain supply chain integrity and prevent the use of non-compliant or unauthorized components. The connectors are intended for delivery to Robins Air Force Base, Georgia, with strict adherence to defense procurement protocols and quality assurance requirements. This is a subcontract issued by the Active Devices Division under the Department of Defense, with a posted date of July 19, 2026, and a firm response deadline of July 30, 2026. The North American Industry Classification System code 334417 categorizes this as electronic component manufacturing. The contract does not designate a specific set-aside status or emphasize small business participation, indicating it is open to qualified vendors regardless of size. All proposals must meet the stringent compliance criteria outlined in the military specifications and include documentation verifying QPL/QML certification. Failure to comply with brand exclusions or material specifications will result in immediate disqualification.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Manufacture of Electrical Plug Connectors (NSN 5935-00-996-4048)The contract requires the full manufacturing or sourcing of 16 electrical plug connectors that fully comply with MIL-STD specifications and the National Stock Number 5935-00-996-4048, ensuring adherence to rigorous material, performance, and durability standards mandated by military specifications. The scope encompasses end-to-end production or procurement, with all components and processes validated to meet exacting defense-grade requirements for reliability and functionality under operational conditions. The deliverables must be traceable, tested, and certified to confirm compliance with all technical and quality benchmarks established by federal defense procurement protocols. The solicitation, issued by the Department of Defense’s Active Devices Division, is classified as a subcontract and is open for responses through July 30, 2026. Performance of the contract is designated to take place at New Cumberland, Pennsylvania, 17070-5002, with all deliverables expected to be routed through that location. The contract falls under the NAICS code 334417, categorizing it within the Electronic Connector Manufacturing industry. Interested parties must submit proposals prior to the response deadline, ensuring alignment with all military compliance protocols and delivery timelines as stipulated in the official solicitation posted on July 19, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Precision Electrical Component ManufacturingThe contract requires the precise manufacturing of a military-spec electrical connector receptacle, part number ST5M1426A001, in full compliance with a detailed technical data package. This encompasses every stage of production including material sourcing, precision machining, assembly, and final inspection to meet stringent defense standards. All work must adhere to exacting quality controls and military specifications to ensure reliability and performance in operational environments. The solicitation is classified as a subcontract under NAICS code 334417 and is managed by the Active Devices Division within the Department of Defense. Proposals must be submitted by August 3, 2026, following the July 19, 2026 posting date. While no set-aside provisions or specific address details are provided, the performance location and point of contact remain unspecified, and all relevant information is accessible through the official DIBBS portal linked in the solicitation.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
Electrical Connector Manufacturing & SupplyThe contract requires the manufacture and supply of 14 electrical plug connectors designated by NSN 5935-01-356-4006, which must fully comply with the military specification MIL-DTL-55330. In addition to the physical components, the supplier must provide a complete technical data package detailing design, materials, and testing parameters to ensure compliance. Origin inspection is mandated to verify that all materials and manufacturing processes meet required standards, and the entire order must be delivered within 20 days of award. The contract is classified as a subcontract under the NAICS code 334417, indicating it pertains to the manufacturing of electrical components and devices. It is issued by the Active Devices Division of the Department of Defense, with a response deadline of July 30, 2026, and was posted on July 19, 2026. All deliverables are subject to strict military quality assurance protocols to ensure operational reliability and interoperability in defense applications.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Precision Connector Manufacturing & SupplyThe contract pertains to the manufacture and supply of three military-grade receptacle connectors identified by NSN 5935-01-458-1697 and part number FAWL-5S-MP, adhering strictly to the technical and quality standards outlined in MIL-DTL-55330 and MIL-STD-129, as mandated by the Defense Logistics Agency. These connectors are critical components intended for defense applications and must meet exacting performance, durability, and labeling requirements to ensure interoperability and reliability in operational environments. The work is classified as a subcontract under NAICS code 334417, which corresponds to the manufacturing of electronic connectors and parts, with performance expected to be carried out under the oversight of the Department of Defense’s Active Devices Division. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. While no specific set-aside classification or point of contact is provided, the contract is accessible via the DIBBS platform, signaling its formal procurement status within the Defense Logistics Agency’s system. Suppliers must ensure full compliance with all military specifications, packaging, and documentation standards, and failure to meet these conditions could result in rejection. The absence of detailed location or contact information implies that the agency expects proposers to reference official procurement channels for further inquiries or clarification.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Electronic Connector Supply – Receptacle (NSN: 5935-01-442-5177)Two military-specification connector receptacles, identified by NSN 5935-01-442-5177, are being procured under a subcontract solicitation issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The units must fully comply with DLA standards and include complete packaging, labeling, and documentation that meet all federal defense logistics requirements. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, and the place of performance is designated as Cherry Point, North Carolina, with zip code 28533-0021. The procurement falls under NAICS code 334417, which pertains to other electronic component manufacturing, and the contract is structured as a subcontract without a specific set-aside designation. All deliveries and compliance documentation must align with DOD supply chain protocols.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Electrical Component Supply – Connector Plug (NSN: 5935-00-904-0845)A single electrical connector plug with NSN 5935-00-904-0845 is being procured under a subcontract to meet specific technical requirements established by the Defense Logistics Agency, ensuring full compliance with military-grade standards for performance, durability, and environmental resilience. The item must be packaged and delivered in accordance with fast-turnaround protocols to support urgent operational needs, with delivery designated to Robins Air Force Base, Georgia, 31098-1626. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with the procurement falling under NAICS code 334417, which classifies it within the electronic component manufacturing sector. The contract is managed by the Maritime Supply Chain ESOC Buys team under the Department of Defense, emphasizing timely fulfillment and adherence to defense logistics protocols without any set-aside provisions or reserved eligibility categories.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Electrical Connector Supply (NSN 5935-01-222-3582)The contract solicits the supply of a specific electrical connector, receptacle with part number KJLB111022-36, identified by NSN 5935-01-222-3582, to meet technical and quality standards established by the Defense Logistics Agency. The product must comply with all applicable regulations, including prohibitions on ozone-depleting substances and restrictions on covered telecommunications equipment, ensuring alignment with federal security and environmental policies. The contract is structured as a subcontract under NAICS code 334417 and is managed by the Maritime Supply Chain ESOC Buys office under the Department of Defense, with performance required at Tinker Air Force Base, Oklahoma, zip code 73145-9031. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026. Although no solicitation number is provided, the official procurement interface is accessible via the DIBBS portal. The contract does not specify any set-aside status, meaning it is open to all eligible suppliers without preference for small, minority-owned, or other designated business categories. All offers must conform to the technical specifications and regulatory requirements to be considered for award, and potential vendors are expected to verify compliance with all federal mandates related to sourcing and product content.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Manufacturing of Military-Grade Electrical ConnectorsThe contract requires the manufacturing of exactly 16 units of a 3-contact electrical receptacle identified by NSN 5935-21-912-2673, adhering strictly to military specifications with zero tolerance for any deviation in quantity. Every unit must fully comply with the Defense Logistics Agency’s rigorous quality, packaging, and delivery standards to ensure operational readiness and compatibility within defense systems. The product is designated for performance at New Cumberland, Pennsylvania, with strict adherence to all technical and logistical requirements mandated by the Department of Defense. This subcontract falls under NAICS code 334417 for other electrical equipment and component manufacturing and was posted on July 19, 2026, with responses due by July 30, 2026. The contracting office is part of LSO Combat Vehicles and Armament, emphasizing the critical nature of the component for military vehicle systems. No variations in quantity, quality, or delivery timelines are permitted, and all manufacturing processes must align with federal defense procurement protocols to ensure secure and reliable fulfillment.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Electronic Connector Manufacturing and AssemblyThe contract involves the manufacture and assembly of a military-spec electronic connector with NSN 5935009044050, strictly adhering to Department of Defense standards including DLA, MIL-STD-2073-1E for packaging, and MIL-STD-129 for labeling and marking. The product must meet exacting military performance and durability criteria, ensuring compatibility and reliability in operational environments. The work is classified as a subcontract under NAICS code 334417, and the place of performance is designated as Robins Air Force Base, Georgia, with all delivered units required to be transported and installed at this location. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, indicating a tight turnaround for qualified subcontractors to submit proposals. The contracting entity is the Active Devices Division under the Department of Defense, underscoring the critical nature of the component for defense systems. While no specific set-aside provisions are listed, the contract requires full compliance with all technical specifications and delivery protocols outlined in governing military standards, leaving no room for deviation. All submissions must align with the exact requirements detailed in the DIBBS system under solicitation number SPE7M526T335C.
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
PLATE, RETAINING, ELECTROfferors responding to solicitation SPE7M5-26-T-335K must comply with strict requirements regarding domestic sourcing, telecommunications restrictions, and procurement compliance. The Berry Amendment and Buy American Act apply, with the Berry threshold lowered to $150,000, mandating disclosure of any non-domestic materials and adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. Offers cannot include items produced via additive manufacturing unless prior approval is granted, and such submissions will be disqualified without it. Offerors must also certify they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations under FAR provisions 52.212-3 and 52.219-1 for applicable categories. Fast Pay is not applicable, and offerors are strongly encouraged to provide quantity ranges due to fluctuating demand, to enable buyer flexibility without administrative delays, though this does not apply to Auto IDC. All contractors must register through DLA’s Account Management & Provisioning System (AMPS) to access the Vendor Shipment Module within two months; failure to do so will prevent shipping to DLA. Vendors using VSM WebServices must update their internal schema per DIBBS notices issued April 23, 2025, and other related alerts. Those submitting anticipated quotes after the closing date must log a “No Bid” on DIBBS with an expected quote date or reason to avoid assumptions of non-responsiveness. The item in question, PLATE, RETAINING, ELECTR, NSN 5935-01-285-2232, quantity 76 each, has a 158-day delivery requirement and must be quoted with manufacturer CAGE, source CAGE, service identification, and test number. The offering must reflect the qualified product list per FAR 52.209-1, and include current dealer or distributor certification. All proposals must be submitted via DIBBS to Barbara Hoffmann at barbara.hoffmann@dla.mil, with no exceptions for non-compliance. APEX Accelerators is available to assist businesses in navigating government contracting requirements
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CUI Safeguarding (NIST SP 800-171)The contract requires implementation and maintenance of NIST SP 800-171 controls to protect covered defense information in accordance with DFARS 252.204-7012, ensuring robust cybersecurity safeguards for Controlled Unclassified Information. This subcontract is under the Department of Defense’s Active Devices Division, with performance located in New Cumberland, Pennsylvania, and is subject to the NAICS code 541512, indicating it relates to computer systems design services. Compliance is mandatory and must be sustained throughout the contract lifecycle to meet federal cybersecurity standards for handling sensitive defense data. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, requiring timely submission of proposals demonstrating capability to meet all NIST SP 800-171 requirements. Contractors must be prepared to demonstrate full adherence to the 110 security controls across 14 families, including access control, audit, configuration management, and incident response, and must maintain continuous compliance through documentation, assessments, and reporting. Failure to meet these standards could result in contract termination or loss of eligibility for future DoD work.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Labeling Compliance ServicesThe contract requires comprehensive packaging, marking, and labeling services tailored to meet U.S. Department of Defense specifications for military shipments. All packaging must adhere to MIL-STD-129 standards, ensuring consistency and durability for field conditions, while GS1 barcode labeling must be accurately applied to support automated tracking and inventory management across the defense supply chain. Hazardous material markings must also be compliant with applicable regulations to ensure safe handling and transportation of dangerous goods. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and falls under NAICS code 561910 for other support activities for transportation. This subcontract opportunity demands strict adherence to federal military standards and precise execution of labeling and marking protocols to maintain operational readiness and logistical integrity. The response deadline is July 30, 2026, and the contract is managed by the Active Devices Division within the Department of Defense.
Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
Supply of ADAPTER, CONNECTOR (NSN: 5935013117304)The contract solicits the supply of 25 units of a commercial off-the-shelf electronic connector with National Stock Number 5935013117304, intended for integration into defense systems. The item is classified under NAICS code 334220, indicating it falls within the electronic component manufacturing sector, and the procurement is structured as a subcontract. The requirement is being managed by the Active Devices Division under the Department of Defense, with performance to be delivered to the location specified as New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with no specific set-aside designation applied, meaning the opportunity is open to all qualified vendors. The contract is accessible via the DIBBS platform for interested parties to review further details and submit proposals.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
Electrical Connector SupplyThe contract requires the supply of two electrical receptacle connectors identified by NSN 5935-01-677-2604, manufactured and delivered in full compliance with federal and defense logistics standards for marking, packaging, and shipping. These components are critical for Defense Department operations and must meet all applicable military specifications to ensure interoperability and reliability in field applications. The procurement is structured as a subcontract under the NAICS code 335313, which pertains to electrical equipment manufacturing, and is managed by the Active Devices Division within the Department of Defense. The solicitation was posted on July 19, 2026, with a mandatory response deadline of July 30, 2026. The place of performance is designated as Sheppard Air Force Base, Texas, with a ZIP code of 76311-2149, indicating the location where the delivered connectors will be utilized or distributed from. The contract is accessible via the DIBBS platform, and while no point of contact or set-aside details are provided, the absence of a solicitation number suggests it may be part of a broader or internal acquisition stream. Failure to meet compliance, delivery timelines, or packaging requirements may result in rejection of the bid or penalties under defense contracting regulations.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2) SupportThe contract entails comprehensive support for achieving CMMC Level 2 compliance through activities centered on NIST SP 800-171 alignment, including the development and refinement of security policies, implementation of robust access control measures, and thorough preparation for audits. This effort is designed to ensure that the contractor meets the mandatory cybersecurity requirements for handling controlled unclassified information within the Department of Defense supply chain, with a focus on practical, actionable steps that bridge policy and technical enforcement. The work will be performed in Columbus, Ohio, and delivery is expected within the window following the response deadline of July 30, 2026, with solicitation posted on July 19, 2026, under a subcontract category and classified under NAICS code 541512 for computer systems design services. The performing organization is the Active Devices Division, operating within the broader Department of Defense framework.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Traceability and Documentation ServicesThe contract requires the preparation and submission of comprehensive traceability documentation for supply chain compliance, specifically using DLA Form 918. This includes compiling and verifying test reports, material certifications, and chain-of-custody records to ensure full accountability and regulatory adherence throughout the procurement lifecycle. The work is classified as a subcontract under NAICS code 541330 and is issued by the Active Devices Division of the Department of Defense, with performance expected to occur in Columbus, Ohio, under the zip code 43213. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, emphasizing a short but critical window for qualification and submission. All deliverables must meet strict documentation standards to support defense supply chain integrity and regulatory scrutiny.
Engineering Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazard Communication and Labeling ServicesThe contract requires the application of hazard warning labels on shipments containing hazardous materials, ensuring strict compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. This subcontract is focused on labeling services critical for the safe handling, transport, and storage of hazardous goods within Department of Defense supply chains, with performance specifically tied to Columbus, Ohio, 43213. The work must be executed in alignment with federal regulations governing the identification and communication of chemical hazards to protect workers and maintain regulatory integrity. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, and falls under NAICS code 541620 for other scientific and technical consulting services. The contracting entity is the Active Devices Division under the Department of Defense, indicating this is a specialized support function for defense-related logistics. No set-aside type is specified, and the contract is structured as a subcontract, meaning the winning vendor will likely operate under a prime contractor’s oversight. The place of performance is strictly located in Columbus, Ohio, and all labeling activities must be completed on-site to meet operational and regulatory timelines.
Environmental Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 322230
New
DIBBS
ESD-Sensitive Packaging and Preservation ServicesThe contract entails the design and supply of electrostatic discharge and electromagnetic interference protective packaging specifically for the safe delivery of microcircuits, adhering strictly to MIL-PRF-81705 standards for barrier materials and A-A-59136 specifications for cushioning. These materials are critical to ensuring the integrity and functionality of sensitive electronic components during transportation and storage by preventing damage from static electricity and electromagnetic fields. The packaging solution must meet exacting military performance criteria to guarantee reliability in defense and aerospace applications. The work is being procured as a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance required to take place in Columbus, Ohio, at the zip code 43213. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. The North American Industry Classification System code 322230 indicates the procurement is aligned with manufacturing activities related to paperboard container and packaging production, emphasizing the industrial nature of the required packaging development and supply. This contract supports critical defense logistics infrastructure by ensuring components remain shielded from environmental threats throughout the supply chain.
Stationery Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334413
New
DIBBS
Digital Microcircuit Manufacturing and AssemblyThe contract requires the manufacture and delivery of 104 units of digital microcircuits identified by NSN 5962014339892 and part number DS12887+, with strict adherence to military standards for lead-free electronics, packaging, and full traceability throughout the production and delivery process. All units must meet stringent defense-grade specifications to ensure reliability and compatibility in critical military applications, with compliance verified at every stage including material sourcing, assembly, testing, and documentation. The work is to be performed under a subcontract arrangement with the place of performance centered in Columbus, Ohio, under the oversight of the Department of Defense’s Active Devices Division, which is managing procurement on behalf of the broader defense supply chain. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, indicating a targeted procurement timeline for securing qualified suppliers capable of meeting exacting technical and regulatory benchmarks. The NAICS code 334413 confirms the scope falls under semiconductor and other electronic component manufacturing, signaling the need for specialized expertise in high-reliability microcircuit production. Although no set-aside or contractor eligibility restrictions are specified, the requirement for full traceability and military compliance implies participation is limited to vendors with proven experience in defense contracting, certified quality systems, and the infrastructure to support end-to-end verification of component integrity. All deliverables must be fully documented and packaged to facilitate seamless integration into existing defense equipment platforms.
Semiconductor and Related Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & NIST SP 800-171 AssessmentThe contract requires the performance and submission of a NIST SP 800-171 assessment to comply with DFARS 252.240-7997, ensuring that all systems handling Controlled Unclassified Information meet the mandated cybersecurity standards for defense contractors. This obligation is critical for maintaining compliance with federal requirements governing the protection of sensitive unclassified information within the defense supply chain, and failure to adhere could result in loss of contract eligibility or penalties. The task is scoped as a subcontract under the NAICS code 541512, with the performance location specified as Columbus, Ohio, 43213. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, leaving a narrow window for preparation and submission. The contracting activity is the Active Devices Division under the Department of Defense, and all deliverables must be completed and submitted by the deadline to ensure continued eligibility to support defense-related work involving CUI.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Technical Documentation & Compliance Submission SupportThe contract requires the preparation and submission of traceability records, test reports, and the DLA L&M Form 918 in strict accordance with specified formatting, naming conventions, and file size limits under 15 MB. All documentation must be accurately compiled and delivered to meet technical and compliance standards outlined by the contracting entity. This work supports regulatory and quality assurance obligations tied to defense-related technical products or systems under the supervision of the Active Devices Division within the Department of Defense. The opportunity is a subcontract set under NAICS code 541611, with a response deadline of July 30, 2026, and a posting date of July 19, 2026. Performance is expected to occur in Columbus, Ohio, with ZIP code 43213. While no point of contact or set-aside information is provided, the solicitation is accessible through the DIBBS platform using the referenced link. Subcontractors must ensure all deliverables are properly structured and submitted on time to fulfill contractual requirements without deviation.
Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 322291
New
DIBBS
ESD/EMI-Sensitive Packaging & PreservationThe contract requires the provision of ESD and EMI-protective packaging materials that fully comply with MIL-PRF-81705 standards, ensuring the safe handling and preservation of sensitive electronic components. All packaging activities must be conducted at an ESD-safe workstation with proper grounding, environmental controls, and procedural adherence to prevent electrostatic discharge and electromagnetic interference contamination. The work must include accurate labeling and preservation techniques to maintain component integrity throughout storage and transit, with strict compliance to military specifications for protective packaging. The contract is classified as a subcontract under NAICS code 322291 and is managed by the ACTIVE DEVICES DIVISION within the Department of Defense. Performance is designated for the location of Columbus, Ohio, with a zip code of 43213. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. No set-aside provisions are in place, and the work must be executed in full alignment with federal defense packaging and handling requirements without deviation from the prescribed technical standards.
Sanitary Paper Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details