Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CONNECTOR, RECEPTACLE, E

Active
SPE7M0-27-T-0265Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M0-27-T-0265, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is a request for quotations for three electrical receptacle connectors, identified by NSN 5935-01-331-9736 and L3 Technologies part number 002814. The contract requires delivery within 164 days after the order is placed, with shipping terms set as FOB Origin. The items are to be delivered to the DLA Distribution San Joaquin facility in Tracy, California. Inspection and acceptance will take place at the destination in accordance with FAR 52.246-2. The procurement is subject to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates DLA master list requirements RA001, RP001, RQ011, and RQ017. Specific material restrictions are in place, prohibiting the intentional addition of mercury or the use of Class I ozone-depleting substances without written approval. The contract also mandates compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS), and invoicing is to be processed via the Wide Area WorkFlow (WAWF) system.

General Info

DLA request for quotations for three electrical receptacle connectors delivered to California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

NAICS

334417 - Electronic Connector Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

1

RFQ SPE7M0-27-T-0265

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS
Office AddressUSA
Contacts
Shannon IRWIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,RECEPTACLE,ELECTRICAL
CONNECTOR,RECEPTACLE,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
L3 TECHNOLOGIES, INC. 34228 P/N 002814
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M0-27-T-0265
SECTION B
PR: 7018673831 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018673831 0001 EA 3.000
NSN/MATERIAL:5935013319736
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:04/06/2027 Original Required Delivery Date:06/23/2027
SPE7M0-27-T-0265 NSN/Part Number: 5935-01-331-9736 Quantity: 3 EA Purchase Request: 7018673831QTY: 3 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
Manufacturer of Electrical Connector Body Plugs (NSN 5935012096811)
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Manufacture of Telephone Jacks (NSN 5935-00-254-9287)This subcontract involves the manufacture of 451 telephone jacks for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The components must be fabricated in accordance with NSN 5935-00-254-9287 and the DLA Master List of Technical and Quality Requirements, utilizing specialized equipment to ensure all critical application tolerances are met. The project requires strict adherence to environmental and regulatory standards, specifically prohibiting the use of mercury and Class I ozone-depleting substances while remaining compliant with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334417 for the Department of Defense.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Supply of Electrical Connector Body Receptacles (NSN 5935-01-696-7568)This subcontract, issued by the Department of Defense DLA Weapons Support Active Devices Division, requires the manufacture or sourcing of 42 electrical connector body receptacles under NSN 5935-01-696-7568. The project is a total small business set-aside under NAICS code 334417, with performance taking place in New Cumberland. The contractor must adhere to DLA Master List requirements, implement strict ESD protection protocols, and ensure all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129. Critical regulatory compliance includes adherence to the Buy American Act and the Berry Amendment, as well as DFARS 252.204-7012 cybersecurity standards. Interested parties must submit their responses by October 26, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Supply of Electrical Receptacle Connectors (NSN 5935-01-502-7673)
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
Supply of Dummy Connector Plugs (NSN 5935-01-615-6109)This subcontract involves the manufacture or procurement of four dummy connector plugs, specifically NSN 5935-01-615-6109, to support prime contractors on DLA Weapons Support ASC projects. The contractor must adhere to the DLA Master List RA001 and ensure strict compliance with quality sampling standards MIL-STD-1916 or ASQ H1331, as well as packaging requirements MIL-STD-2073-1E and MIL-STD-129. Performance for this contract will take place in Huntsville, Alabama. To be eligible, the provider must maintain ISO 9001:2015, SAE AS9003, and CMMC Level 2 certifications. The opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with a response deadline set for October 23, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, PLUG, EL
Solicitation # SPE7M5-27-T-1085
Solicitation SPE7M5-27-T-1085 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of five electrical connector body plugs, identified by NSN 5935012096811. The items are designated as critical application items and must be delivered FOB Origin within 20 days of award, with an original required delivery date of October 14, 2026. Inspection and acceptance will occur at the destination. The contract specifies strict quality and sampling standards, requiring compliance with SAE AS9003 or ISO 9001, and utilizes zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-DTL-55330 for connectors, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Palletization must follow DLA requirement RP001. The contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. This procurement is set aside for small businesses and incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M0-27-T-0372
Solicitation SPE7M0-27-T-0372, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is for the procurement of 23 electrical receptacle connectors (NSN 5935015027673). The items must comply with Technical Data Package Rev A Gen 1 and reference specification MIL-DTL-38999N(1) Revision N. This is a qualified item subject to the Qualified Products List (QPL) requirements for Federal Stock Class 5935. Delivery is required within 70 days after the order, with a need ship date of January 5, 2027, and a final required delivery date of February 20, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. Strict quality and sourcing restrictions apply to this procurement. Material manufactured by Amphenol (CAGE 77820), Matrix (CAGE 14283), or Pyle National (CAGE 49367) with lot date codes between July 2006 and June 2016 is prohibited, as is material from Deutsch Engineered Connecting (CAGE 11139) produced prior to July 2013. The use of Class I ozone-depleting substances is prohibited without written approval. Packaging must adhere to RP001 and MIL-STD-129, with non-hazardous items following ASTM D3951 and hazardous items following TQ requirement IP025. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing must be processed electronically through the Wide Area Workflow (WAWF) system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-27-T-1027
Solicitation SPE7M5-27-T-1027 is a request for quotations from the Defense Logistics Agency for 13 electrical receptacle connectors, part number MS17346R36N52P, under NSN 5935014121961. This is designated as a critical application item and must be produced in accordance with basic specification MS17346F (Revision F) and reference specification MIL-DTL-22992H(4) SUP 1 (Revision H). The item is a qualified product, requiring compliance with the Qualified Products List for Federal Stock Class 5935. Material manufactured by Amphenol, Matrix, or Pyle National with lot date codes from July 2006 through June 2016 is explicitly prohibited. Additionally, the contract prohibits the intentional addition of mercury and the use of Class I ozone-depleting substances. The procurement is governed by NAICS code 334417 and includes a HUBZone price evaluation preference. Delivery is required within 168 days, with an original required delivery date of April 10, 2027, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Invoicing and receiving reports are to be processed electronically via the Wide Area WorkFlow system. All quotes must be submitted through the DIBBS portal, and offers utilizing additive manufacturing are ineligible for award.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-27-T-1042
Solicitation SPE7M5-27-T-1042 is a fixed-price contract issued by the DLA Weapons Support Active Devices Division for the procurement of eight electrical receptacle connectors, identified by NSN 5935010806329. The items must comply with technical specifications MIL-DTL-55074/3C (Revision C) and MIL-DTL-55074G(1) (Revision G). Delivery is required by October 14, 2026, with shipping terms set as FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will also occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically RP001 for palletization and MIL-STD-129 for labeling. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, the agreement incorporates comprehensive federal regulations, including DFARS requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act and Berry Amendment.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-27-T-1063
Solicitation SPE7M5-27-T-1063 is a request for the procurement of three electrical receptacle connectors, identified by NSN 5935-01-463-5253. The acquisition is managed by the DLA Weapons Support Active Devices Division under NAICS code 334417. The required delivery date is October 14, 2026, with a delivery window of 20 days after order. The items are to be delivered to the 0212 OD CO Support Maintenance in Medina, Ohio. While offers should be submitted based on FOB Origin, the inspection and acceptance points are designated as destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 and RP001 for palletization. While ASTM D3951 is the general packaging standard, the DLA Master List of Technical and Quality Requirements takes precedence. Technical requirements are further governed by RA001, and specific quality notes RQ011 and RQ017 apply regarding item marking and the removal of government identification from non-accepted supplies. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by October 26, 2026. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-27-T-1084
Solicitation SPE7M5-27-T-1084 is a fixed-price contract issued by the DLA Weapons Support Active Devices Division for the procurement of one electrical plug connector, identified by NSN 5935-01-479-1610. The required delivery date is October 14, 2026, with a delivery lead time of 20 days after order. The item is to be delivered FOB destination to NMCB P2512 in Port Hueneme, California. Inspection and acceptance will occur at the destination point in accordance with FAR 52.246-2. The contract mandates strict adherence to technical and quality standards, including MIL-DTL-55330 for connector preservation and packaging, MIL-STD-129 for marking, and RP001 for palletization. Hazardous materials must be labeled per the Hazard Communication Standard and IP025 guidelines. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. The solicitation also incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and prohibitions on covered defense telecommunications equipment.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
MAINTENANCE KIT, ELECTR
Solicitation # SPE7M0-27-T-0378
Solicitation SPE7M0-27-T-0378 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for five electrical connector maintenance kits, identified by NSN 5935-01-737-6254 and Panduit Sales Corp part number KP-1075Y. The requirement specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of October 8, 2026. Delivery is FOB Origin, with inspection and acceptance occurring at the destination. The items are to be shipped to the Naval Base Coronado in San Diego, California, using the fastest traceable means, specifically excluding parcel post. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1 Appendix D for kit packaging, MIL-DTL-55330 for connectors, and MIL-STD-129 for marking. Palletization must comply with DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is open to various small business categories, including HUBZone, SDVOSB, and WOSB, and incorporates standard FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Offers utilizing additive manufacturing are ineligible for award.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 334418
New
DIBBS
Supplier of Specialized Electrical Power Cable (NSN 6145-01-127-77727)This subcontract involves the manufacture or sourcing of specialized electrical power cable under NSN 6145-01-127-77727 to support prime contractors for the Department of Defense DLA Weapons Support Maritime Supply Chain. The requirement is for 10 feet of continuous cable, which must be preserved, packaged, and marked in strict accordance with MIL-DTL-12000, MIL-STD-2073-1E, and MIL-STD-129 standards. The contract is categorized under NAICS code 334418 and requires delivery FOB Origin to the Portsmouth Naval Shipyard in Portsmouth, zip code 03801-5000. Interested parties must submit their responses by the deadline of October 26, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 485999
New
DIBBS
MIL-SPEC Packaging and Marking for Aviation ComponentsThis subcontract involves providing specialized military packaging and marking services for aviation components to support DLA supply contracts. The contractor is responsible for ensuring that all items are processed using MIL-SPEC materials and equipment, strictly adhering to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The specific scope of work requires the delivery of 100 packages of ear cushions, fully marked and packed for international shipment to the Government of Israel. This effort is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain ESOC Buys.
All Other Transit and Ground Passenger Transportation

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 423450
New
DIBBS
Supply of Bose Ear Cushions (NSN 5965-01-554-2388)This subcontract involves the procurement of 100 packages of genuine Bose Corp ear cushions, part number 022243, meeting NSN 5965-01-554-2388 specifications. The items are intended for prime contractors supporting DLA supply contracts under the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain ESOC Buys. Delivery of the goods is required on a FOB Origin basis. The contractor must adhere to strict regulatory requirements, including compliance with the Buy American Act and the Berry Amendment. Additionally, a CMMC Level 2 self-assessment is mandatory for participation. The opportunity is categorized under NAICS code 423450, with a response deadline set for October 26, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Supply of Compressor Cylinder Heads (NSN 4310010170637)This subcontract involves the supply of two compressor cylinder heads for the USS NIMITZ (CVN 68) under the DLA Weapons Support Maritime Supply Chain. The hardware must strictly adhere to NSN 4310010170637 specifications and include all necessary mounting provisions for critical applications. All deliverables must comply with the DLA Master List of Technical and Quality Requirements. The contractor is responsible for packaging and labeling the items in accordance with ASTM D3951 and MIL-STD-129 standards. Delivery of the two cylinder heads is required FOB Destination to FPO 09523. The procurement is managed by the Department of Defense under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the provision of military-grade packaging and marking services for prime contractors. The scope of work involves the processing of 10 units of CORE ASSY, ensuring they are fully packaged and marked for origin inspection. Technical requirements mandate strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, utilizing specific materials such as reinforced containers, anti-static bagging, and moisture barriers. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488410. Interested parties must submit their responses by October 26, 2026. This project focuses on maintaining high-standard preservation methods to ensure the integrity of maritime supply chain components during transport and storage.
Motor Vehicle Towing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Manufacturing of Core Assembly (NSN 5945-00-481-2806)This subcontract involves the manufacture and supply of 10 Core Assembly units for prime contractors supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for the fabrication and assembly of units according to NSN 5945-00-481-2806 and the DLA Master List technical requirements. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418. Compliance is mandatory regarding the Buy American Act and the Berry Amendment. Additionally, the contractor must complete a CMMC Level 2 self-assessment to ensure the secure handling of Covered Defense Information. The response deadline for this requirement is October 26, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
Supply of Electromagnetic Relay (NSN 5945015281179)
Relay and Industrial Control Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
MIL-SPEC ESD and EMI Protective PackagingThis subcontract involves providing specialized packaging services for prime contractors supporting the Department of Defense, specifically for DLA Weapons Support Maritime Supply Chain projects. The scope of work focuses on the application of ESD and EMI protective materials and cushioning to safeguard circuit card assemblies from damage. All packaging and marking must be executed in strict accordance with MIL-STD-2073-1E, MIL-PRF-81705, and MIL-STD-129 to ensure the components are ready for international shipment. The opportunity is categorized under NAICS code 333613 and was posted on October 15, 2026, with a response deadline of October 26, 2026. The contract is managed by the DLA Weapons Support Maritime Supply Chain ESOC Buys agency.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334413
New
DIBBS
Qualified Component Supply for Circuit Card AssemblyThis subcontract involves the supply of qualified electronic components for circuit card assemblies supporting the Department of Defense through the DLA Weapons Support Maritime Supply Chain. The selected provider will be responsible for sourcing and delivering certified components that strictly adhere to military technical specifications and are verified through approved Qualified Products Lists or Qualified Manufacturers Lists. All deliveries must be accompanied by certificates of conformance to ensure quality and technical compliance. Due to the nature of the technical data involved, the contractor must maintain strict adherence to ITAR and EAR compliance regulations. This opportunity falls under NAICS code 334413 and is managed by the DLA Weapons Support Maritime Supply Chain ESOC Buys. Interested parties must submit their responses by the deadline of October 26, 2026.
Semiconductor and Related Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334412
New
DIBBS
Circuit Card Assembly Manufacturing (NSN 5998-01-609-8286)This subcontract involves the fabrication and assembly of one Hull Power Control Circuit Card Assembly for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The selected provider must perform PCB fabrication and component population according to control part number 12523112 and complete a First Article Test to ensure quality. The use of additive manufacturing is strictly prohibited for this project. To be eligible, contractors must hold ISO 9001:2015 certification, be part of the US/Canada Joint Certification Program, and maintain ITAR/EAR approval. The final deliverable is one fully tested CCA. Responses to this solicitation are due by October 26, 2026.
Bare Printed Circuit Board Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M0-27-T-0377
Solicitation SPE7M0-27-T-0377 is a fixed-price contract issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one electromagnetic relay, identified by NSN 5945015281179 and part number 2099-128 from Frontgrade Technologies Inc. The item is to be delivered FOB Origin to Camp Humphreys in Pyeongtaek, South Korea, with a required delivery timeline of five days and an original required delivery date of October 6, 2026. Both inspection and acceptance will take place at the destination. The contract mandates strict adherence to several technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific requirements include the identification of lead finish attributes per IPC/JEDEC J-STD-609 and a prohibition on the intentional addition of mercury, except for functional uses specified by NAVSEA 5100-003D. Administrative compliance requires the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American and Balance of Payments Program. All quotes must be submitted via the DLA Internet Bid Board System by October 26, 2026.
Relay and Industrial Control Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS