Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTOR, RECEPTACLE, E

Active
SPE7M1-26-U-4387Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a electrical receptacle connector identified by NSN 5935-01-255-7736 and part number MS3450W14S-2P, with a quantity of 566 units. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, as outlined in procurement note H01. The product must meet stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and is designated as a critical application item with physical identification and marking requirements aligned with SAE AS34501 Revision C and SAE AS50151 Revision E. Packaging must conform to MIL-STD-2073-1E and DLA’s packaging requirements, including specific preservation methods, wrapping materials, and labeling per MIL-STD-129 with no special marking codes. Delivery is set for 72 days from the award date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination. The solicitation number is SPE7M1-26-U-4387, issued by the Department of Defense’s Maritime Supply Chain, with responses due by July 24, 2026, and primary point of contact Bryan Fair.

General Info

566 connector units requested by DLA under solicitation SPE7M1-26-U-4387, response due July 21, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-U-4387.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,RECEPTACLE,ELECTRICAL
CONNECTOR,RECEPTACLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
----------------------------------------------------
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
----------------------------------------------------
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
----------------------------------------------------
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
----------------------------------------------------
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS34501 REVISION NR C DTD 05/01/2017 PART PIECE NUMBER: MS3450W14S-2P
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS50151 REVISION NR E DTD 06/01/2020 PART PIECE NUMBER: MS3450W14S-2P
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M1-26-U-4387
SECTION B
PR: 1000236613 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000236613 0001 EA 566.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5935012557736
DELIVERY (IN DAYS):0072
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:D3 OPI:O INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7M1-26-U-4387 NSN/Part Number: 5935-01-255-7736 Quantity: 566 EA Purchase Request: 1000236613QTY: 566 Delivery: 72 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract is for the procurement of electrical plug connectors identified by part number TV06RW21-121S and TV06RW21-121SN, supplied by AMPHENOL CORPORATION, with a National Stock Number of 5935-01-682-2509. A total quantity of 32 units is required at a unit price of $32.00, with total contract value reflecting this amount. Deliveries are to be made FOB origin with a strict zero percent quantity variance, inspected and accepted at the destination point. Packaging must comply fully with MIL-STD-2073-1E, including specific preservation methods, materials, and container codes, with marking adhering to MIL-STD-129. All packaging and palletization follows DLA’s RP001 requirements. The items are to be delivered to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with a required delivery date of November 8, 2026, and a target ship date of December 15, 2026, allowing for a 133-day lead time. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by solicitation or award date based on acquisition size. No special marking is required beyond standard compliance. Transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M5-26-T-339A, posted on July 21, 2026, with responses due by August 3, 2026, under NAICS code 334417 for electrical connector manufacturing, and is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract pertains to the procurement of an electrical plug connector identified by NSN 5935008789916 and part number MS3108R16-12S, with a requirement for nine units at a unit price of $9.00, totaling $81.00. The item must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including qualification under the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. Physical identification and marking must follow SAE AS31081 Revision B and SAE AS50151 Revision E, with packaging and marking conforming to MIL-STD-2073-1E and MIL-STD-129 without special markings. Delivery is FOB origin within 20 days of contract award, with no quantity variance allowed, and inspection and acceptance occur at origin. The item must be packaged using prescribed methods, including dry preservation and standardized container types, with shipping directed to the Ordnance Readiness Development Center in Nantou County, Taiwan. The solicitation number is SPE7M5-26-T-337Y, with a response deadline of August 3, 2026, and the original required delivery date is July 24, 2026. The contract is managed by the Department of Defense’s Active Devices Division, with Margaret Smith as the point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract specifies the procurement of a plug-type electrical connector identified by NSN 5935-01-128-3608, with a firm fixed price and a quantity of one unit per line item, totaling two identical entries. The item must comply with military specification MIL-DTL-55302G and its revisions, and is classified as a qualified product subject to the Qualified Products List requirements outlined in procurement note H01 for Federal Stock Class 5935. The use of ozone-depleting substances in any phase of design, manufacturing, or cleaning is strictly prohibited unless explicit written approval from the contracting officer is obtained, and this prohibition overrides any conflicting specification requirements. All packaging and labeling must adhere to MIL-STD-129 and DLA packaging requirements, with hazardous materials packaged per Fed-Std-313 and IP025, while non-hazardous items follow ASTM D3951 unless superseded by higher-priority DLA technical requirements. Palletization must conform to RP001, and the unit of issue is each. Delivery is required at the destination in South Korea, with shipments directed to Bldg S2002, CP Humphreys, Pyeongtaek, and must be completed within 20 days after award date. Inspection and acceptance occur at the destination, with no tolerance for variation in quantity. The contract is issued under full and open competition, and the item is designated for government use with specific tracking identifiers, project codes, and shipping instructions tied to the transportation and delivery logistics outlined in DLAD procedural notes.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, RECEThis contract specifies the procurement of a connector body, receptacle with NSN 5935-01-458-5596, under solicitation SPE7M5-26-Q-0746, requiring strict adherence to DLA packaging and technical quality standards as defined in the DLA Master List of Technical and Quality Requirements. The item is qualified under the Qualified Products List for Federal Stock Class 5935, and its design and manufacturing must comply with MIL-DTL-38999/44D and MIL-DTL-38999N specifications, with part number D38999/44WJ35BA. The use of any Class I ozone-depleting substances is prohibited in all processes unless explicitly approved in writing by the contracting officer, and this restriction overrides any conflicting specification but does not reduce performance requirements. The item must be marked and packaged per MIL-STD-129, with commercial packaging per ASTM D3951 only if not hazardous under FED-STD-313, and all packaging must align with DLA’s RP001 requirements including palletization and unit pack specifications. The contract is firm fixed price with zero variance allowance, inspection and acceptance occurring at the destination. Delivery is due 110 days after the award date, with shipment originating from the contractor and directed to Fort Hood, Texas, via the fastest traceable means excluding parcel post. The item is not hazardous and must be labeled and marked according to government directives, with unique identifiers including the M/F code W45RNQ61620235 and RDD 555. The supplier must comply with configuration change management protocols and any variance requests must follow formal engineering change proposal procedures. The unit of issue is one each, priced as a single unit, with required delivery on or before June 18, 2026, and the contract is issued under NAICS code 334417 for the Department of Defense, Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract specifies the procurement of a connector, receptacle with NSN 5935-01-660-1337 and part number RM232-080-111-6600, in a quantity of two units. Delivery is required within 20 days from the contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and must be marked according to MIL-STD-129 with no special marking codes applied. Palletization must adhere to DLA packaging requirements. The shipment is to be sent via the fastest traceable means, explicitly prohibiting parcel post, to the designated receiving location at Marine Aviation Logistics Squadron 11 in San Diego, California. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue or award date depending on acquisition size. The contract is issued under solicitation SPE7M5-26-T-338M, with a response deadline of August 3, 2026, and a required delivery date of July 16, 2026. The point of contact is Margaret Smith of the Department of Defense’s Active Devices Division, and the item falls under NAICS code 334417.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
ARM, REARVIEW MIRROR
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTORContract SPE7M0-26-T-015F specifies the procurement of 15 units of an ADAPTER, CONNECTOR with NSN 5935-01-601-9382 and part number 5217 from SPECTRUM CONTROL, INC. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must be packaged and labeled in strict accordance with DLA packaging standards, including MIL-STD-129 and RP001, with hazardous material requirements governed by TQ requirement IP025 and non-hazardous items conforming to ASTM D3951 unless superseded by DLA Master List requirements. The use of ozone-depleting substances is prohibited in all manufacturing and processing phases unless explicitly approved in writing by the Contracting Officer, and any substitution of parts or administrative numbering changes requires formal documentation and approval from the original manufacturer. All items must be shipped via traceable freight methods excluding parcel post, with delivery addressed to ASRS Reception Building 1, Bay 6, Tobyhanna, PA, and the freight shipping address to ASARS 1C, Bay 6, Tobyhanna, PA. The required delivery date is July 21, 2026, and the contract includes detailed government-specific codes for tracking, including DIC, DIST, ADV, FC, and MPF identifiers, along with a designated point of contact, Gerard Quinn, for inquiries.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract pertains to the procurement of a connector receptacle identified by NSN 5935-01-449-4914 and part number 103670-3, with a quantity of two units, to be delivered within twenty days from the date of award under solicitation SPE7M5-26-T-338D. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and containerization, and all shipping must adhere to DLA packaging requirements and avoid parcel post. The item must not contain intentional additions of mercury or mercury compounds, except for approved functional uses such as in batteries, fluorescent lamps, or sensors, with portable devices requiring a secondary containment boundary. Marking and palletization follow strict military standards, and the shipment must be sent via the fastest traceable means to the specified receiving address at MCAS Miramar, San Diego. The contract incorporates all relevant technical and quality requirements listed under the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The supplier must be either TE Connectivity Corporation or Tyco Electronics UK Ltd, both with the same part number. The delivery is for government use only, under project AE5 TP 2, and the point of contact is Margaret Smith of the Department of Defense. The original required delivery date is July 16, 2026, and the solicitation response deadline is August 3, 2026. Transportation and shipping instructions must follow DLAD procedural notes C19 and C20, and all documentation must reference the authorized unit of issue as defined by ANSI X12 standards.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
PLATE, RETAINING, ELEThis contract pertains to the procurement of a retaining plate for electrical applications, identified by NSN 5935-01-221-4310 and part number M24231/11-020, with a quantity of one unit. The item must be furnished in strict compliance with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must conform to MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and all marking must adhere to MIL-STD-129 without special identifiers. The product is subject to strict prohibition against the intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any portable devices containing mercury must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and must be completed within 122 days from the contract date, with a final ship date no later than December 4, 2026. The item must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics must follow DLAProc Note C19 and C20. The contract is issued under solicitation SPE7M5-26-T-338R, with a response deadline of August 3, 2026, and is classified under NAICS code 334417 for active electronic component manufacturing.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract is for the procurement of 32 electrical plug connectors, identified by NSN 5935-01-686-3435 and part number CV1205-19-5, under solicitation SPE7M1-26-U-3956. Delivery is required within 82 days under FOB origin terms, with no tolerance for quantity variance—exactly 32 units must be supplied. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which override any commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for labeling and marking, and if the item is hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, though subordinate to DLA requirements. The unit of issue is each, with a quantity per unit pack of one, and palletization must follow DLA Packaging Requirements for Procurement. Inspection and acceptance occur at the destination. The contract is a DLA Direct, CONUS delivery and the estimated quantity is not guaranteed for purchase by the IDC. The point of contact is Bryan Fair, and the solicitation was posted with a response deadline in July 2026.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract specifies the procurement of 11 electrical connector receptacles with NSN/Part Number 5935-00-772-2351 under solicitation SPE7M5-26-T-337X, with a delivery requirement of 20 days after delivery order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including foreign national employees or subsidiaries, with DFARS 252.225-7048 fully applicable. Only contractors with approved US/Canada Joint Certification Program status, completion of DLA export control training, and explicit authorization may access the technical data. Additional requirements include compliance with DLA packaging standards, physical marking of bare items, removal of government identification from non-accepted supplies, and adherence to cybersecurity maturity model certification level 2 for third-party assessors. Technical data referenced is incomplete but the delivered item must fully satisfy all cited standards alongside the part number specifications. The contracting activity is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThis contract specifies the procurement of electrical plug connectors under solicitation SPE7M5-26-T-281F, with the NSN 5935-01-086-5653 and a required quantity of 111 units, each at a unit price of $111.00 for a total price of $12,321. The item must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and packaging must adhere to MIL-STD-2073-1E and MIL-DTL-55330 for preservation. Acceptance occurs at the destination, with no variance allowed in quantity, and delivery is due within 105 days of award, FOB origin, to the DLA Distribution facility in New Cumberland, Pennsylvania. The connectors must be marked in accordance with MIL-STD-129, with no special marking required, and palletization must meet DLA packaging standards. Approved supplier part numbers include those from AMPHENOL CORP, GILBERT ENGINEERING CO INC/INCON, TEXTRON SYSTEMS CORPORATION, and NORTHROP GRUMMAN SYSTEMS CORPORATION. The delivery deadline is October 20, 2026, with an original required delivery date of September 15, 2026. The contract is governed by DLA procedures for transportation and freight, and all items must be cleared of government identification if rejected. The solicitation was posted on July 21, 2026, with responses due by July 24, 2026, and the North American Industry Classification System code is 334417 for other electrical equipment manufacturing.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 333914
New
DIBBS
ROTOR, PUMPThe contract specifies the procurement of a single rotor pump unit with part number RSC275AJ and NSN 4320010401112, supplied by CIRCOR PUMPS NORTH AMERICA LLC, under solicitation SPE7M1-26-T-220M. Delivery is required within 20 days from contract award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, unit containment E6, and marking per MIL-STD-129 with no special codes. The item must not contain intentional mercury or mercury compounds unless exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof and equipped with a secondary containment boundary per NAVSEA 5100-003D. The delivery address is NORFOLK, VA, and shipping must be via the fastest traceable means, explicitly prohibiting parcel post. The required delivery date is July 17, 2026, with the contract issued under DoD procurement standards incorporating technical and quality requirements from the DLA Master List. The point of contact is Michael Reese, and the contract falls under NAICS code 333914 for pump manufacturing.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334418
New
DIBBS
SOLENOID ASSEMBLY
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLYThe contract specifies the purchase of one butterfly valve with NSN 4820-01-652-3977 and part number 77-050N-5917R30 from FLOWLINE VALVE AND CONTROLS, L.L.C., under solicitation SPE7M1-26-T-221L. Delivery is required within five days FOB destination to the USS OMAHA (LCS 12) at FPO AP 96694, with no tolerance for quantity variance. The item must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting specifications including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. The valve, which may involve casting or forging, is subject to DLA’s Casting and Forging Assistance Request process if sourcing or tooling support is needed. Shipment must be made via traceable transport, not parcel post, and must reference the DLA vendor code, RDD 999, and project identifier 747 TP 1. The required delivery date is July 21, 2026, with a response deadline of August 3, 2026, and all items are subject to inspection and acceptance at the destination.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, PNEUMATIC TANThe contract is for one pneumatic air brake valve, identified by NSN 4820-00-771-8513 and part number 2214695, to be delivered within five days to the USNS SOJOURNER TRUTH in San Diego, California. The item is to be furnished FOB origin with no variance in quantity allowed and must comply with all DLA packaging requirements as defined in MIL-STD-2073-1E and MIL-STD-129 for marking and packaging, including specific codes for packaging method, material, and container types. The valve must not contain mercury or mercury compounds unless specifically exempted under approved exceptions, such as functional use in sensors or instruments, and must meet NAVSEA 5100-003D requirements for secondary containment if mercury is present in portable devices. The item is subject to inspection and acceptance at the destination and must be shipped via traceable freight methods, not parcel post. The contract number SPE7M1-26-T-220N includes technical and quality requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. The delivery deadline is July 20, 2026, and the point of contact for inquiries is Misty Eckard of the Department of Defense’s Maritime Supply Chain.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUIThe contract pertains to the procurement of a filter element for fluid pressure, identified by NSN 4330-01-131-3049 and part number 410162, with a quantity of two units required. Delivery is due within twenty days of award and must be shipped FOB origin to the Naval Undersea Warfare Center Division Keyport in Washington, with strict adherence to packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129. No special marking is required, and palletization must comply with DLA packaging directives. The item must be shipped via traceable freight methods only, explicitly prohibiting parcel post. Mercury and mercury-containing compounds are strictly prohibited from contact with the product unless part of exempted components such as specific instruments, sensors, or controls as outlined by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. The solicitation number is SPE7M1-26-T-220Q, with a response deadline of August 3, 2026, and an original required delivery date of July 16, 2026. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each, with a fixed unit price and zero tolerance for quantity variance. Inspection and acceptance occur at the destination. The point of contact for the contract is Michael Reese of the Defense Logistics Agency, and the item falls under NAICS code 333998. Government-use codes and shipping identifiers are provided for internal logistics tracking, and the contract is issued under the Department of Defense by the Maritime Supply Chain organization.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
PLUG, INDICATOR, VALVThe contract specifies the procurement of one unit of a plug, indicator, valve with NSN 4820015786257 and part number 933174 from Parker Hannifin Corporation, under solicitation SPE7M1-26-T-220Y. Delivery is required within five days of award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, while adhering strictly to the DLA Master List of Technical and Quality Requirements, which takes precedence. The item must be palletized according to DLA packaging guidelines and shipped using traceable freight methods, excluding parcel post. The delivery address is Fort Bliss, Texas, with associated military unit identifiers and shipment controls including RDD, NMCS, and project code TP 1. The required delivery date is July 21, 2026, and the point of contact is Misty Eckard with DLA. The unit of issue is each, and the purchase request number is 7017554848. Government-specific markings and codes, including IPD, DIC, and SHIPMENT identifiers, are to be applied as mandated for logistics and tracking purposes.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335921
New
DIBBS
CABLE ASSEMBLY, FIBEThe contract is for the procurement of 22 units of the Cable Assembly, FIBE, identified by NSN 6020-01-609-1695 and part number 2009012702CW-02, supplied by FIBER SYSTEMS INTERNATIONAL, INC. Each unit is priced at $22.00, with a total contract value of $484.00, and delivery is required within 20 days FOB origin. The item is subject to strict packaging standards requiring compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and DLA’s own packaging requirements, with DLA’s Master List of Technical and Quality Requirements taking precedence over all other specifications. The supplies must be shipped via traceable freight methods—parcel post is explicitly prohibited—and delivered to the designated military facility in San Diego, California. The acquisition is a total small business set-aside under NAICS 335921, and the contractor must satisfy Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements. Compliance with DLA’s requirements for government identification removal, traceability, and defense information handling is mandatory, and all documentation must reflect the correct unit of issue and quantity per unit pack. The required delivery date is July 16, 2026, and the contract was issued under solicitation SPE7M1-26-T-221A.
Fiber Optic Cable Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334514
New
DIBBS
COUPLER, TEST SET
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMALThe contract pertains to the procurement of two thermal resistors identified by NSN 5905-01-648-4092 and part number 7A20022-6, with a unit price of $2.00 per unit and a total contract value of $4.00. Delivery is required within 154 days from the award date, with shipment FOB origin, no tolerance allowed for quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate container codes, and packing code U, while marking adheres to MIL-STD-129 with no special marking required. The contractor must also apply lead-free component identification markings per IPC/JEDEC J-STD-609 on each unit pack, following its specified placement guidelines, and ensure palletization meets DLA’s packaging standards. All technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by acquisition type and solicitation timeline. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is January 5, 2027, with an original delivery deadline of March 7, 2027. Transportation details are governed by DLAD Proc Notes C19 and C20, and the solicitation number is SPE7M1-26-T-221D, issued under NAICS code 334416 by the Department of Defense.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CAP ASSEMBLYThe contract pertains to the procurement of a Critical Application Item, Part Number 149C6039, with NSN 1680007240942, under solicitation SPE7M1-26-U-3904, issued by the Department of Defense through the Maritime Supply Chain. The requirement is for 56 units to be delivered FOB Origin within 143 days, with no tolerance for quantity variance, and acceptance to occur at the destination point. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization conforming to specified DLA standards. Sampling for quality conformance must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The manufacturer, Sargent Fletcher Inc. with CAGE 72429, must ensure all government identification is removed from non-accepted items per RQ011, and all measuring and test equipment used must meet RT001 standards. This is a DLA Direct, CONUS procurement under a simplified acquisition, and the unit of issue is each (EA).
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, SOLID STATEThe contract pertains to the procurement of 35 units of a solid state relay identified by NSN 5945-01-737-0991 and part number GPRM-B4C05D-3, issued under solicitation SPE7M1-26-T-221E by the Department of Defense through the Maritime Supply Chain. Delivery is required within 186 days from the award date, with the item to be shipped FOB origin and inspected and accepted at the destination. The unit of issue is each, with a fixed unit price of $35.00 and no quantity variance permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservative methods and container requirements, and marking must follow MIL-STD-129 with a special marking code ZZ for additional requirements. Palletization must adhere to DLA packaging standards, and each individual unit package must be marked in accordance with IPC/JEDEC J-STD-609 to clearly identify lead content and other component attributes. The delivery address is specified as DLA Distribution San Joaquin in Tracy, CA, and the required ship date is February 6, 2027, matching the original delivery deadline. Technical and quality requirements are incorporated by reference from the DLA Master List, and the contract includes detailed transportation instructions referenced through DLAD procedural notes.
Relay and Industrial Control Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract solicitation is for a SEAL, PLAIN with NSN/Part Number 5330-01-397-8419, under purchase request 1000236738 for a quantity of 102 units. The solicitation, identified by number SPE7M1-26-U-4388, was posted on July 6, 2026, with a response deadline of July 21, 2026. The procurement is managed by the Defense Logistics Agency, operating under the Department of Defense, and is classified as a federal solicitation with no specific set-aside designation. The place of performance and office address details are unspecified, though the contracting entity is based in the United States. Interested parties must submit responses through the official DIBBS portal prior to the deadline to be considered for award.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details