Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Construction Fire Prevention Plan (CFPP) Development & Fuel Modification

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development and submission of a Construction Fire Prevention Plan to the Los Angeles County Fire Department, with specific emphasis on implementing fuel modification zones and establishing temporary roadway surfaces to mitigate wildfire risks during active construction. These measures are intended to reduce the likelihood of fire ignition and spread by managing vegetation, flammable materials, and access routes in and around the project site. The plan must align with local fire safety standards and be submitted promptly to ensure regulatory compliance throughout the project lifecycle. The work is associated with a project in Santa Clarita, California, under a subcontract classification and falls under NAICS code 541690, which pertains to other scientific and technical consulting services. The solicitation was posted on July 15, 2026, and is managed by the City of Santa Clarita, indicating the initiative is part of broader local efforts to enhance community resilience against wildfires during infrastructure development. All fire prevention strategies must be thoroughly documented and ready for inspection upon submission to the LACoFD.

General Info

Develop fire prevention plan with fuel zones and temporary roads for Santa Clarita construction project.

Agency

California → City of Santa Clarita

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Santa Clarita, CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → City of Santa Clarita

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → City of Santa Clarita

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develop and submit a Construction Fire Prevention Plan to LACoFD, including fuel modification zones and temporary roadway surfaces to reduce wildfire risk during project execution.

Similar Contracts

Same NAICS industry code

Supply Chain and Obsolescence ManagementThe contract focuses on proactive supply chain and obsolescence management to ensure the continuous availability of critical filter elements by identifying and addressing sources that are at risk of diminishing capacity or becoming obsolete. This subcontract requires the contractor to implement systematic monitoring, risk assessment, and mitigation strategies to prevent disruptions in the supply chain, with an emphasis on early detection of potential failures in component sourcing. The goal is to maintain uninterrupted production and delivery of filter elements essential to defense operations without reliance on deprecated or failing suppliers. The contract is issued under the NAICS code 541690 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details are not provided, performance is expected to support defense-related requirements, likely involving coordination with multiple tiers of suppliers and potential redesign or qualification efforts for alternative components. The terms demand a comprehensive, forward-looking approach to supply chain resilience, prioritizing sustainability and operational continuity over reactive fixes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Construction Safety Services IDIQThe Port of Seattle has initiated a proactive Construction Safety Services IDIQ to address the growing complexity and liability associated with construction activities on its property. With increasing legal obligations and heightened scrutiny from recent court rulings, the Port is formalizing a comprehensive safety program to ensure all construction projects are conducted without disrupting port operations and with the highest standards of worker and public safety. This initiative is designed to monitor, enforce, and continuously improve safety protocols across all construction sites under Port jurisdiction, reflecting a strategic shift toward risk mitigation and regulatory compliance. The contract is issued under NAICS code 541690 and is structured as an indefinite delivery/indefinite quantity agreement to provide flexible access to qualified safety service providers. The program will support a range of construction activities by integrating expert safety oversight, compliance auditing, and operational coordination directly into project workflows. Point of contact for inquiries is Sue Yi, with Bruce Gamble serving as the Project Manager, and further details can be found through the Port’s official solicitation portal. The forecasted posting date indicates the Port is preparing to solicit proposals in the near future to establish a pool of vetted safety service firms ready to respond to emergent and planned construction needs.

Construction Management

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires comprehensive identification and documentation of hazardous materials used in manufacturing or packaging processes, with a primary focus on developing compliant Safety Data Sheets and accurate hazard labels that meet both OSHA and Department of Defense standards. All materials must be thoroughly assessed for potential risks, and the resulting documentation must align precisely with federal regulatory frameworks to ensure workplace safety and legal adherence across all operational phases. The work is tied to the DDSP New Cumberland Facility and must be performed at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This subcontract, classified under NAICS code 541690, is open for response until August 10, 2026, with proposals due by 5:00 PM Eastern Time. The solicitation is managed by the Department of Defense and posted on the DIBBS platform, indicating the need for specialized technical expertise in regulatory compliance, chemical safety, and documentation accuracy. While no set-aside designation or point of contact information is provided, successful bidders must demonstrate proven experience in handling hazardous material compliance for government contracts, particularly within defense manufacturing environments, with an emphasis on precision, timeliness, and strict adherence to federal safety protocols.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hazard Warning Labeling and MSDS Submission for Valve AssemblyThe contract requires the identification of all hazardous materials contained within a valve assembly, with strict adherence to regulatory standards for chemical safety and environmental compliance. The contractor must prepare hazard warning labels that fully comply with applicable federal and industry requirements, ensuring accurate communication of risks associated with the materials. Prior to contract award, the contractor is obligated to submit complete and current Material Safety Data Sheets to the Contracting Officer, demonstrating full transparency and readiness for regulatory review. The work is tied to a subcontract under a Department of Defense procurement led by DLA DIST SAN JOAQUIN, with performance required at Tracy, California, 95304-5000. All submissions and labeling activities must be completed by the response deadline of August 10, 2026, to remain eligible for consideration.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for neoprene gasket materials, ensuring full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001. The work must accurately reflect the chemical composition and associated hazards of the materials to support safe handling, storage, and use within defense applications. All documentation must meet stringent federal regulatory standards for clarity, completeness, and consistency in hazard identification and precautionary measures. This is a subcontract solicitation issued by the Defense Logistics Agency Dist San Joaquin under the NAICS code 541690, with a response deadline of August 4, 2026. The place of performance is designated as Tracy, California, 95304-5000, indicating that deliverables must be submitted to or coordinated through this location. The contract is part of broader defense supply chain compliance efforts and demands strict adherence to federal hazardous materials labeling and documentation requirements without exception. Bidders must demonstrate technical expertise in regulatory compliance and experience with defense-specific documentation protocols.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThis contract requires full compliance with OSHA’s Hazard Communication Standard for all shipped items, mandating proper labeling and the timely provision of Safety Data Sheets to ensure workplace safety and regulatory adherence. The work pertains to the accurate identification and communication of chemical hazards associated with products delivered under the subcontract, with strict attention to formatting, content, and distribution protocols consistent with federal safety requirements. Performance is localized to New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must meet the standards outlined in the Hazard Communication Standard without deviation. The contract is classified under NAICS code 541690 and is issued by the Department of Defense through its CONSTRUCTION & EQUIPMENT T & IFO EQ office. It is a subcontract set for response by August 4, 2026, with the solicitation posted on July 30, 2026. There is no set-aside designation specified, and while no point of contact is provided, all submissions and inquiries must be directed through the official DIBBS platform using the referenced link. Compliance is non-negotiable, and failure to meet labeling or SDS requirements could result in rejection of deliverables or contractual penalties.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Technical Data and Compliance Documentation SupportThe contract titled Technical Data and Compliance Documentation Support is a small business set-aside subcontract issued by the Department of Defense under the agency name Construction & Equipment Containers. It requires the contractor to prepare and submit comprehensive technical documentation to ensure compliance with contractual obligations, with specific emphasis on hazard communication materials and alignment with Defense Logistics Agency technical requirements. The work is performance-based and centered on facilitating regulatory and operational compliance through accurate, timely documentation. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, and is classified under NAICS code 541690 for other scientific and technical consulting services. The place of performance is designated as Corpus Christi, Texas, with a zip code of 78419-5255, indicating the primary operational location for deliverables. The contract is part of a total small business set-aside program, meaning only small businesses are eligible to bid. All submission and compliance activities must be managed to meet DLA standards and federal procurement guidelines.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires strict adherence to OSHA and DFARS regulations for handling hazardous materials, with a focus on proper hazard labeling in accordance with 29 CFR 1910.1200 and timely submission of Safety Data Sheets where applicable. Compliance is mandatory throughout all phases of performance, ensuring that all materials are accurately identified, documented, and communicated to relevant personnel to maintain safety and regulatory alignment. The work is associated with a subcontract under the Defense Logistics Agency, with performance taking place at Edwards Air Force Base, California, with a zip code of 93524-8600. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, and falls under the NAICS code 541690, indicating it relates to other scientific and technical consulting services. There is no set-aside designation, and the contract is open to eligible subcontractors capable of meeting all federal safety and documentation requirements for hazardous materials. The point of contact information is not provided, and all responses must be submitted through the designated DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Hazard Communication and Labeling Compliance ServicesThe contract requires the preparation of hazard warning labels and safety data sheet documentation in full compliance with OSHA’s Hazard Communication Standard for all hazardous materials included in shipments. This work involves accurate classification, labeling, and documentation to ensure regulatory adherence and workplace safety across the supply chain. The services are critical for maintaining compliance with federal hazard communication requirements and must be executed with precision to avoid regulatory violations or safety risks. This is a subcontract under NAICS code 541690, issued by the Department of Defense through DLA Dist San Joaquin, with performance based in Tracy, California, ZIP 95304-5000. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The contract does not specify a set-aside type, and there is no designated point of contact listed. Bid submissions must be made through the official DIBBS portal linked in the solicitation details.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract entails providing hazard communication compliance services specifically for valve disks that involve hazardous materials, ensuring adherence to OSHA regulations through the proper labeling of containers and the delivery of accurate Material Safety Data Sheets. This work is critical for safeguarding personnel and maintaining regulatory compliance in environments where hazardous substances are handled or stored. The scope is focused on the accurate identification, documentation, and communication of chemical hazards associated with these components across the supply chain. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 541690 for other scientific and technical consulting services. It was posted on July 30, 2026, and performance will be carried out in support of federal defense operations, though specific performance location details are not provided. The services must align fully with federal safety mandates to mitigate risks and ensure consistent, legally compliant hazard communication practices for all applicable valve disk components.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract titled Hazardous Materials Compliance and Labeling requires the preparation of Safety Data Sheet documentation and the proper application of hazard labels in full compliance with OSHA and Department of Defense regulations. This subcontract is a Total Small Business Set-Aside under the SBA program, reserved exclusively for small businesses as defined by the FAR 19.5 guidelines, and is classified under NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, and the work must be performed at the designated place of performance in Tracy, California, with the zip code 95304-5000. The contracting activity is managed by DLA Dist San Joaquin under the Department of Defense, and interested parties must submit proposals through the DIBBS system using the provided RFQ link.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Military Marking and Barcoding ServicesThe contract seeks standardized military marking and automated identification services in accordance with MIL-STD-129, requiring the application of linear barcodes and Data Matrix codes to ensure proper tracking and identification of military property. The work involves applying durable, compliant labels to equipment and supplies to meet Department of Defense standards for logistics and inventory management. This subcontract opportunity is open for response until August 10, 2026, and falls under NAICS code 541690 for other scientific and technical consulting services. The acquiring agency is the Defense Logistics Agency under the Department of Defense, with no specific place of performance or point of contact listed. Interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered.

Defense Logistics Agency

POSTED

DEADLINE