Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails providing hazard communication compliance services specifically for valve disks that involve hazardous materials, ensuring adherence to OSHA regulations through the proper labeling of containers and the delivery of accurate Material Safety Data Sheets. This work is critical for safeguarding personnel and maintaining regulatory compliance in environments where hazardous substances are handled or stored. The scope is focused on the accurate identification, documentation, and communication of chemical hazards associated with these components across the supply chain. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 541690 for other scientific and technical consulting services. It was posted on July 30, 2026, and performance will be carried out in support of federal defense operations, though specific performance location details are not provided. The services must align fully with federal safety mandates to mitigate risks and ensure consistent, legally compliant hazard communication practices for all applicable valve disk components.

General Info

Provide OSHA-compliant hazard communication for hazardous valve disks under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide hazard communication compliance including OSHA-mandated labels and Material Safety Data Sheets (MSDS) for valve disks involving hazardous materials.

Similar Contracts

Same NAICS industry code

Supply Chain and Obsolescence ManagementThe contract focuses on proactive supply chain and obsolescence management to ensure the continuous availability of critical filter elements by identifying and addressing sources that are at risk of diminishing capacity or becoming obsolete. This subcontract requires the contractor to implement systematic monitoring, risk assessment, and mitigation strategies to prevent disruptions in the supply chain, with an emphasis on early detection of potential failures in component sourcing. The goal is to maintain uninterrupted production and delivery of filter elements essential to defense operations without reliance on deprecated or failing suppliers. The contract is issued under the NAICS code 541690 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details are not provided, performance is expected to support defense-related requirements, likely involving coordination with multiple tiers of suppliers and potential redesign or qualification efforts for alternative components. The terms demand a comprehensive, forward-looking approach to supply chain resilience, prioritizing sustainability and operational continuity over reactive fixes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in about 1 month

Construction Safety Services IDIQThe Port of Seattle has initiated a proactive Construction Safety Services IDIQ to address the growing complexity and liability associated with construction activities on its property. With increasing legal obligations and heightened scrutiny from recent court rulings, the Port is formalizing a comprehensive safety program to ensure all construction projects are conducted without disrupting port operations and with the highest standards of worker and public safety. This initiative is designed to monitor, enforce, and continuously improve safety protocols across all construction sites under Port jurisdiction, reflecting a strategic shift toward risk mitigation and regulatory compliance. The contract is issued under NAICS code 541690 and is structured as an indefinite delivery/indefinite quantity agreement to provide flexible access to qualified safety service providers. The program will support a range of construction activities by integrating expert safety oversight, compliance auditing, and operational coordination directly into project workflows. Point of contact for inquiries is Sue Yi, with Bruce Gamble serving as the Project Manager, and further details can be found through the Port’s official solicitation portal. The forecasted posting date indicates the Port is preparing to solicit proposals in the near future to establish a pool of vetted safety service firms ready to respond to emergent and planned construction needs.

Construction Management

POSTED

about 13 hours ago

DEADLINE

Environmental Compliance Reporting and RecordkeepingThe contract requires comprehensive environmental compliance reporting and recordkeeping related to avian interactions, including documentation of incidental takes and all mitigation actions undertaken. All records must be meticulously maintained and submitted through required forms and the USFWS online systems to both Lincoln Electric System and applicable regulatory agencies. The work demands strict adherence to reporting protocols and timelines to ensure regulatory alignment and environmental accountability. This subcontract is issued under NAICS code 541690 and is open for bid with a response deadline of August 18, 2026. The contract is managed by Lincoln Electric System in Nebraska, with no specific physical location outlined for performance. The nature of the work implies ongoing environmental monitoring and administrative rigor, requiring expertise in wildlife compliance, regulatory reporting systems, and accurate data management. No set-aside designation is specified, and the solicitation was posted on July 30, 2026.

Lincoln Electric System

POSTED

DEADLINE

Quality Inspection and Compliance VerificationThe contract requires comprehensive pre-shipment inspection and documentation services to ensure strict compliance with DS30.9 standards, focusing on verifying that all materials and components meet Philadelphia Gas Works specifications without any unauthorized substitutions. This includes a detailed review of product traceability, material certifications, and adherence to PGW’s technical and procedural requirements throughout the supply chain. All inspection activities must be thoroughly documented and submitted for validation prior to shipment to confirm full regulatory and operational alignment. The solicitation is issued as a subcontract under NAICS code 541690 and is open for response until August 13, 2026, with submissions due by 6:00 PM Eastern Time. The work is performed on behalf of Philadelphia Gas Works, an agency operating within Pennsylvania, though specific performance location details are not provided. Participants must be prepared to demonstrate robust quality control processes and possess the capability to conduct on-site or facility-based inspections to validate compliance. Failure to meet DS30.9 requirements or to provide complete, accurate documentation will result in non-compliance and potential rejection of delivered goods.

Philadelphia Gas Works

POSTED

DEADLINE

Bioinformatics & Computational Biology SupportThe contract seeks specialized support in bioinformatics and computational biology to advance synthetic biology initiatives, with a focus on computational modeling and data analysis techniques essential for engineering biological systems. Key deliverables include genetic circuit simulation to predict and optimize modular biological components, metabolic modeling to understand and enhance cellular pathways, and machine learning applications aimed at refining the sensitivity and specificity of biosensors. The work is intended to accelerate the design-build-test cycle in synthetic biology by leveraging quantitative approaches to reduce experimental iteration and improve system predictability. This subcontract is issued under the NAICS code 541690 for other scientific and technical consulting services and is managed by the Defense Advanced Research Projects Agency under the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline of August 6, 2026, indicating a rapid procurement timeline common for high-priority defense-related research. The performance location and point of contact details are unspecified, suggesting the work may be conducted remotely or across multiple institutions, with flexibility on implementation location. The absence of set-aside classifications indicates the opportunity is open to all eligible contractors without preference for small, minority-owned, or other specialized businesses.

Defense Advanced Research Projects Agcy

POSTED

DEADLINE

Pandemic Influenza Surveillance and Strain Selection SupportThe contract seeks to establish a subcontract for comprehensive global surveillance and analysis supporting the selection of pandemic influenza strains, with a focus on antigenic characterization and bioinformatics capabilities. The work involves monitoring influenza viruses worldwide to assess their antigenic properties, genetic evolution, and potential pandemic risk, enabling informed decisions for vaccine development and public health preparedness. Data collection and analysis must be conducted at a global scale, ensuring timely, accurate, and actionable insights for government health authorities. The performance location is in Washington, D.C., with a federal oversight entity under the Department of Health and Human Services, specifically Barda – ASPR/DAAPPO/Barda DCMA. The contract is categorized under NAICS code 541690, indicating it is for other scientific and technical consulting services. The opportunity was posted on July 30, 2026, with a firm deadline for responses on August 15, 2026. This subcontract aims to strengthen the nation’s capacity to anticipate and respond to emerging influenza threats by integrating real-time surveillance data with advanced analytical tools to support global influenza strain selection efforts.

Barda - Aspr / Daappo / Barda Dcma

POSTED

DEADLINE

Technical Compliance and AI Use Disclosure SupportThe contract seeks technical support for AI use disclosure in vehicle telematics and diagnostics systems, requiring comprehensive documentation that addresses governance frameworks, bias mitigation strategies, and human oversight mechanisms. The work must ensure compliance with applicable standards for ethical AI deployment, particularly as these systems process sensitive data related to vehicle performance, driver behavior, and environmental conditions. Deliverables must demonstrate transparency in how AI models are developed, validated, and monitored to prevent discriminatory outcomes and maintain accountability throughout their operational lifecycle. This subcontract is issued under NAICS code 541690, indicating it pertains to other scientific and technical consulting services, and is tied to the U.S. Embassy in Caracas under the Department of State. The response deadline is August 29, 2026, with work performance expected to occur in Caracas. The solicitation does not specify a set-aside type or point of contact, and the primary focus is on delivering auditable, enforceable documentation that enables regulatory and operational review of AI-driven functions within fleet or diagnostic systems used in diplomatic or government vehicle operations.

US Embassy Caracas

POSTED

DEADLINE

On-Site Safety Compliance & MonitoringThis contract, titled On-Site Safety Compliance & Monitoring, requires full adherence to OSHA 29 CFR 1915 standards for shipyard employment safety, including the conduct of weekly safety inspections and the consistent maintenance of necessary personal protective equipment on site. The work is to be performed at Curtis Bay, with all safety protocols rigorously enforced to ensure a secure working environment in compliance with federal regulations. The solicitation is set aside exclusively for small businesses under the SBA Total Set Aside classification, designated under NAICS code 541690 for other scientific and technical consulting services, and is managed by the Department of Homeland Security’s Sflc Procurement Branch 3. Responses must be submitted by August 4, 2026, at 2:00 PM, with the opportunity posted on SAM. gov on July 30, 2026, and no point of contact is listed for this opportunity.

Sflc Procurement Branch 3(00040)

POSTED

DEADLINE

Annual UST Inspection & CertificationThe contract requires comprehensive annual inspections of underground storage tanks to ensure full compliance with Air Force standards and regulatory requirements, culminating in the issuance of formal certification documents verifying operational readiness. All work must adhere to established protocols for detecting leaks, assessing tank integrity, and confirming proper secondary containment and monitoring systems are functioning as mandated. The opportunity is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program, with a NAICS code of 541690 indicating it falls under other scientific and technical consulting services. The place of performance is designated as 94535, and responses must be submitted by August 20, 2026. The contracting organization is listed as FA4427 60 Cons Lgc under the Department of Defense, with no point of contact provided, and all submissions must be made through the SAM.gov portal prior to the deadline.

FA4427 60 Cons Lgc

POSTED

DEADLINE

Safety Plan Development & ComplianceThis contract requires the development and implementation of a site-specific Safety Plan tailored to tree removal operations, ensuring full compliance with ANSI Z133-2026 standards and applicable federal safety regulations. The plan must identify, assess, and mitigate hazards associated with forestry activities, incorporating proper equipment use, worker training protocols, fall protection, debris management, and emergency response procedures. The scope demands a detailed understanding of operational environments and the ability to adapt safety measures to unique site conditions while maintaining rigorous adherence to industry-best practices. The contract is classified as a subcontract under a Small Business Set Aside, with the NAICS code 541690 indicating it falls under Other Scientific and Technical Consulting Services. It is issued by the U.S. Department of Agriculture through its CSA East 1 office, with performance required in Pineville, Louisiana, ZIP 71360. Respondents must submit proposals by September 11, 2026, at 6:00 p.m. Eastern Time, and the solicitation was posted on July 30, 2026. Participation is limited to small businesses verified under SBA guidelines, and successful bidders will be expected to demonstrate proven experience in occupational safety planning for arboricultural work, with enforceable controls and documentation aligned to both national standards and federal compliance frameworks.

Csa East 1 Usda-Fs

POSTED

DEADLINE

in about 1 month

Hazardous Materials Handling and LabelingThe contract requires strict adherence to OSHA and GHS standards for the proper labeling of hazardous materials, ensuring all containers are accurately marked with hazard communications including pictograms, signal words, and precautionary statements. Each shipped package must also include a complete Safety Data Sheet (SDS) to provide critical information on handling, storage, emergency response, and disposal procedures. Compliance with the Department of Transportation’s Hazardous Materials Regulations (49 CFR) is mandatory for all transport activities, covering packaging, marking, placarding, documentation, and employee training to ensure safe movement of dangerous goods across jurisdictions. This is a small business set-aside subcontract under NAICS code 541690, awarded by the General Services Administration’s Supply Chain Management Contracting Division, with performance expected in Kansas City. The opportunity was posted on July 30, 2026, and responses are due by August 3, 2026, at 9:00 PM Eastern Time. The contractor must demonstrate capacity to meet federal regulatory requirements for hazardous materials management and be capable of integrating SDS documentation into every shipment without exception, ensuring continuous compliance across the supply chain.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

System Commissioning & TestingThe contract pertains to the commissioning and testing of a CCTV system, requiring the contractor to perform functional testing, verify alarm integration, confirm recording accuracy, and deliver operational sign-off reports to ensure the system meets all operational requirements. All deliverables must align with established standards to certify system readiness for full deployment. The work is classified as a subcontract under a Small Business Set Aside, specifically designated for small business concerns, and falls under the NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on July 30, 2026, with a response deadline of August 6, 2026, at 8:30 PM. The place of performance is located in the zip code 85309, and the contracting agency is the Department of Defense under the office designation FA4887 56 Cons Cc. The contract does not specify a point of contact or detailed organizational structure, but the performance location and set-aside classification indicate it is targeted toward small businesses capable of delivering specialized technical services in a defense environment.

FA4887 56 Cons Cc

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Compliant Packaging and Kitting ServicesThe contract requires the packaging and preservation of valve disks in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring they are properly containerized, marked, and prepared for extended storage and reliable shipment. All work must adhere to military-grade protocols for environmental protection, labeling, and handling to maintain readiness and integrity over time. This includes precise documentation and procedures for sealing, desiccants, corrosion inhibitors, and protective materials tailored to the valve disks’ specifications and operational environment. The service is classified as a subcontract under NAICS code 493190 and is issued by the Defense Logistics Agency under the Department of Defense. Although specific location details and point of contact information are not provided, the performance location and administrative oversight remain within the DLA’s supply chain framework. The solicitation was posted in July 2026 and is accessible through the DIBBS system, indicating it is part of an active defense logistics initiative focused on long-term inventory management and readiness support.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Manufacturing of Valve Disks (NSN 4820011267403)The contract mandates the precision manufacture and delivery of 11 valve disk units identified by NSN 4820011267403 to the Defense Logistics Agency at New Cumberland, ensuring full compliance with military specifications governing material composition, dimensional tolerances, and operational performance. The equipment must meet rigorous defense standards to guarantee reliability and interoperability within military systems, with no tolerance for deviation in quality or function. This is a subcontract under the NAICS code 332911, classified as a precision manufacturing activity, and was posted on July 30, 2026, indicating a future delivery timeline. The contract is managed by the Department of Defense through the Defense Logistics Agency, with performance obligations tied directly to the agency’s logistical network. While no specific point of contact or place of performance address is provided, the delivery destination and regulatory framework are clearly defined, emphasizing adherence to federal procurement protocols and quality assurance requirements.

Industrial Valve Manufacturing

POSTED

DEADLINE

LAMP, INCANDESCENT

Solicitation # SPE8E7-26-T-3444

The contract is for a single incandescent lamp with part number Q1000T3/CL/240V and NSN 6240-00-885-6755, procured under solicitation SPE8E7-26-T-3444 by the Defense Logistics Agency on behalf of the Department of Defense. The item is being acquired through a fully competitive process in accordance with military and federal specifications, and compliance with DLA packaging and technical quality requirements is mandatory, with all referenced standards drawn from the DLA Master List of Technical and Quality Requirements. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and the delivery must be completed within 20 days after order placement at the specified performance location in Jackson, Mississippi, ZIP 39232-8881. The procurement is classified under NAICS code 335139 and is being handled as a federal acquisition with no set-aside designation. The point of contact for the contract is Kelly Mitchell, reachable via email and phone provided, and all official documentation and updates are accessible through the DIBBS portal. Any non-accepted supplies must have government identification removed prior to return, and the applicable revisions of technical and quality requirements are determined by the solicitation issue date since this is a simplified acquisition. The supplier must adhere strictly to all referenced DLA requirements, and failure to comply with specifications or delivery timelines may result in rejection of the supply.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E4-26-Q-0338

This contract specifies the procurement of cold-drawn/rolled steel bars made from SAE AMS-S-7720B, composition 302, with a diameter of 0.875 inches and lengths between 8 and 16 feet, delivered in full-foot increments only. Each foot of material weighs approximately 2.044 pounds, and the product must comply with strict dimensional and quality standards outlined in referenced technical documents. A Certificate of Quality Compliance, or mill-material certification, is mandatory for every shipment and must accompany each delivery to the customer or DLA depot, with a copy sent directly to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer information including heat and lot number, and exact dimensions using approved methods such as stenciling or stamping, excluding die stamping. The markings must be legible, waterproof, stable under normal handling, and free of contaminants. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared. Products not sourced from approved QSLD distributors are considered unauthorized substitutions and may result in criminal penalties. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129R, with special codes Z and ZZ as defined by ASTM A700, and adhesive labels required for bars under 0.250 inches in nominal diameter. Palletization, preservation, and shipping follow DLA-specific packaging guidelines, and shipments must be sent via traceable freight methods—parcel post is prohibited. The delivery point is Nellis Air Force Base, with a 30-day acceptance delivery order window, firm fixed pricing, and zero variance allowed on quantity. Inspection and acceptance occur at destination, and all technical and quality data, including CDRL-METALSCERT, are governed by the DLA Master List of Technical and Quality Requirements, accessible through official DLA portals.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L7-26-T-4504

The contract specifies the procurement of two power supply units under solicitation SPE7L7-26-T-4504, with a delivery deadline of 20 days from award and delivery terms set at FOB destination. The item, identified by NSN 6130016214007 and part number G1W-3760V from JAF INTERNATIONAL, INC., is subject to strict compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and labeling performed as directed. Sampling inspections follow MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The supply must be free of intentional mercury or mercury-containing compounds, except for exempted uses such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is directed to FPO AP 96692 aboard USS JACKSON LCS 6, with shipment required via the fastest traceable means excluding parcel post. The contract prohibits quantity variance and mandates inspection and acceptance at the destination. The unit of issue is each (EA), with no pricing details listed, and the contract is under federal agency oversight by the Defense Logistics Agency.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-159T

The contract specifies the procurement of one DISK, VALVE with NSN 4820-01-477-0616 and part number V3C10421-01 from VACCO INDUSTRIES, under solicitation SPE7MC-26-T-159T, with a required delivery within 20 days of award. The item must be delivered FOB origin, inspected and accepted at the destination, with no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, materials, and unit container codes, with marking adhering to MIL-STD-129 and no special marking required. The product is destined for USS HYMAN G RICKOVER (SSN 795) in Groton, CT, and must be shipped via fastest traceable means, explicitly prohibiting parcel post. Strict environmental compliance is enforced: mercury or mercury-containing compounds are prohibited except for specified functional applications under NAVSEA 5100-003D, requiring shock-proof design and secondary containment for portable devices; class I ozone-depleting chemicals are entirely banned, with any substitutes needing prior approval. Delivery must meet the original required date of July 23, 2026, and the contract incorporates all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The point of contact is Paula Mcclary, reachable via email and phone provided, and the solicitation is managed by the Defense Logistics Agency under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

DESICCANT CONTAINER, DE

Solicitation # SPE8E8-26-T-4929

The contract calls for the delivery of five desiccant containers for dehumidifiers under solicitation SPE8E8-26-T-4929, with a unit price of $5.000 and a total contract value of $25.000. Delivery is required FOB Origin within five days of order receipt, with the destination being ASRC Federal Facilities Logistics at 6801 Roosevelt Blvd., Building 110/Door 16, Jacksonville, FL 32212. Inspection and acceptance are to occur at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E, using Packaging Code U, Preservation Method 10 (Clean and Dry), and Unit Container D3, with palletization governed by DLA’s RP001 requirements. Marking and labeling must conform to MIL-STD-129, with no special marking required. The item is designated as a critical application and is identified by NSN 4440-01-116-9581 and part number TA495-5. Inspection and quality assurance are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample unless otherwise specified; MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not acceptance criteria. Critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, corresponding to AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. The contractor must comply with the DLA Master List of Technical and Quality Requirements referenced by RA001 and RC001. Additional clauses mandate compliance with safeguarding requirements for covered defense information, prohibitions on trafficking in persons, employment eligibility verification, sustainable products, and hazardous material identification. The contract includes FAR and DFARS clauses covering equal opportunity, accelerated small business payments, changes, subcontracting, and contract type. Invoicing must be submitted through WAWF, and the contractor is required to provide a Unique Entity Identifier and CAGE code if applicable. The contract is subject to DFARS 252.204-7012 cybersecurity requirements, DFARS 252.240-7997 NIST

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

TAPE, REFLECTIVE

Solicitation # SPE8E5-26-T-2025

The contract pertains to the procurement of 3 picture glasses (PG) of reflective tape, with each PG equivalent to 10 units, totaling 30 units, under NSN 9390001224967 and part number 4SE00573-5. The item is to be delivered FOB origin within five days of order receipt, with delivery directed to the Royal Jordanian Air Force Headquarters in Amman, Jordan. Packaging must comply strictly with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including specific preservation methods as defined by QUP:001, which mandates Clng/Dry:1 preservation with unspecified materials for wrapping, cushioning, and dunnage; plastic use is discouraged unless contractually required. Marking must adhere to MIL-STD-129 with no special marking codes applied, and barcoding is required for logistics tracking. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and addresses covered defense information under RD003. Inspection and acceptance occur at origin, and invoicing must be processed through Wide Area WorkFlow (WAWF). The contract value is fixed at $3.00 for the entire quantity, classified as a simplified acquisition under FAR 52.213-4 with applicable deviations. The contract includes a full suite of cybersecurity and compliance clauses, including safeguarding covered defense information under 252.204-7012, NIST SP 800-171 assessment requirements, and prohibitions on covered telecommunications equipment. Hazard communication requirements are governed by DFARS 252.223-7001 and OSHA standards, and the contractor must comply with representations regarding entity identification, socioeconomic status, and whistleblower rights. The contract was issued by the Defense Logistics Agency on July 30, 2026, with a response deadline of August 4, 2026, and requires all submissions through the DLA Internet Bid Board System.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

DEADLINE

FLUSHING UNIT, TOILE

Solicitation # SPE8E8-26-T-4925

The contract pertains to the procurement of two flushing units for toilets, identified by NSN 4510-00-464-3184, with a required delivery within 20 days of award. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is managed through solicitation number SPE8E8-26-T-4925 and was posted on July 30, 2026, with responses due by August 10, 2026. The acquisition falls under NAICS code 421720 and is designated as a federal procurement with no specific set aside. Technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirement. The contractor must comply with DLA packaging standards and remove all government identification from rejected supplies. The supplier, MAG Aerospace Industries Inc DBA Monogram Systems based in Carson, California, is expected to meet all performance and delivery obligations. Primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided in the contract data.

POSTED

DEADLINE

GAGE, DEPTH, RULE

Solicitation # SPE8E5-26-T-3742

This contract pertains to the procurement of a single unit of a depth gage ruler with NSN 5210-01-602-6297 under solicitation SPE8E5-26-T-3742 issued by the Defense Logistics Agency on behalf of the Department of Defense. The item has no shelf life requirement and is subject to strict export controls under ITAR or EAR regulations, meaning any technical data associated with it cannot be shared or exported without prior authorization from the Department of State or Department of Commerce, including disclosures to foreign nationals within the United States. To access this controlled technical data, contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD training on export-controlled data handling, and pass the DLA Export-Controlled Technical Data Questionnaire, with approval granted by the DLA controlling authority. The solicitation incorporates technical and quality requirements from the DLA Master List referenced online, with revisions controlled based on acquisition type and amendment dates. Cybersecurity requirements mandate that any third-party assessment organization involved must be CMMC Level 2 certified. The place of performance is designated as Jacksonville with a delivery requirement of five days after delivery order award. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is governed under NAICS code 333515. All inquiries should be directed to Khue Nguyen at the provided contact details.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

PARTS KIT, AIR CONDITIO

Solicitation # SPE8E8-26-T-4927

This contract specifies the procurement of a single parts kit for an air conditioning system, identified by NSN 4130-01-541-9069, with a quantity of one unit to be delivered within 20 days to the USS Tripoli LHA 7 at FPO AP 96694-2900. The kit must be packaged and marked in strict compliance with MIL-STD-129 and MIL-STD-2073-1E, ensuring all components are securely contained within a single box unless multiple boxes are necessary, in which case each must be clearly labeled as part of a set. Contents must be cushioned to prevent movement or damage, and an itemized list must accompany each boxed kit. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional uses in batteries, fluorescent lights, specific instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The deliverable is subject to inspection and acceptance at the destination, with no tolerance for quantity variance, and the vendor must adhere to DLA packaging and labeling protocols, including the use of specific procurement codes and transportation procedures outlined in DLAD notices C19 and C20. The solicitation was issued under contract SPE8E8-26-T-4927 with a response deadline of August 10, 2026, and the original required delivery date is July 9, 2026.

Nonferrous Forging

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-159E

The contract is for one ball valve with NSN 4820-01-563-6585, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-159E, with a required delivery date of July 28, 2026, and a 20-day delivery window. The valve must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and must be packaged in accordance with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. The item is to be delivered FOB destination with no variance in quantity allowed, inspected and accepted at the destination, and shipped by the fastest traceable means—parcel post is prohibited. The shipment is addressed to USS MESA VERDE LPD 19, FPO AE 09578, with transportation governed by DLAD PROC NOTES C19 and C20, and the supplier must reference the provided TCN and supplier address code for government tracking.

Industrial Valve Manufacturing

POSTED

DEADLINE