Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONTACT, ELECTRICAL

Active
SPE7M2-26-T-5767Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-5767.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTACT,ELECTRICAL
CONTACT, ELECTRICAL THE PACKAGING/LABELING REQUIREMENT OF SAE AS39029
PARA 5.1 AND 3.6.3 WHICH STATES THE IDENTIFICATION MARKING OF EACH UNIT
PACK SHALL INCLUDE THE PRESENT AND MOST RECENTLY SUPERSEDED PART NUMBER
MAY BE EXCEPT. THE PRESENT OR REQUIRED ITEM PART NUMBER WILL STILL BE
REQUIRED ON THE LABEL.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MANUFACTURER PART NUMBERS THAT APPEAR ON QPL
AT THE TIME OF AWARD ARE ACCEPTABLE FOR
PROCUREMENT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD SAE AS39029/1C
SPE7M2-26-T-5767
SECTION B
REVISION NR C DTD 09/01/2014
PART PIECE NUMBER: M39029/1-101
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD SAE AS39029E REVISION NR E DTD 01/01/2022 PART PIECE NUMBER: M39029/1-101
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017601256 0001 EA 860.000
NSN/MATERIAL:5999001375066
DELIVERY (IN DAYS):0105
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
THE PACKAGING/LABELING REQUIREMENT OF SAE AS39029 PARA 5.1 AND 3.6.3 WHICH STATES THE IDENTIFICATION MARKING OF EACH UNIT PACK SHALL INCLUDE THE PRESENT AND MOST RECENTLY SUPERSEDED PART NUMBER MAY BE EXCEPT. THE PRESENT OR REQUIRED ITEM PART NUMBER WILL STILL BE REQUIRED ON THE LABEL.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3218
SPE7M2-26-T-5767
SECTION B
PR: 7017601256 PRLI: 0001 CONT’D
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:10/23/2026 Original Required Delivery Date:03/20/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017601256 0002 EA 5,812.000
NSN/MATERIAL:5999001375066
DELIVERY (IN DAYS):0105
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
THE PACKAGING/LABELING REQUIREMENT OF SAE AS39029 PARA 5.1 AND 3.6.3 WHICH STATES THE IDENTIFICATION MARKING OF EACH UNIT PACK SHALL INCLUDE THE PRESENT
SPE7M2-26-T-5767
SECTION B
PR: 7017601256 PRLI: 0002 CONT’D
AND MOST RECENTLY SUPERSEDED PART NUMBER MAY BE
EXCEPT. THE PRESENT OR REQUIRED ITEM PART NUMBER
WILL STILL BE REQUIRED ON THE LABEL.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
THE PACKAGING/LABELING REQUIREMENT OF SAE AS39029 PARA 5.1 AND 3.6.3 WHICH STATES THE IDENTIFICATION MARKING OF EACH UNIT PACK SHALL INCLUDE THE PRESENT AND MOST RECENTLY SUPERSEDED PART NUMBER MAY BE EXCEPT. THE PRESENT OR REQUIRED ITEM PART NUMBER WILL STILL BE REQUIRED ON THE LABEL.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:07/23/2026 Original Required Delivery Date:03/20/2027
SPE7M2-26-T-5767
SECTION B
PR: 7017601256 PRLI: 0002 CONT’D

SPE7M2-26-T-5767 NSN/Part Number: 5999-00-137-5066 Quantity: 860 EA Purchase Request: 7017601256QTY: 6672 Delivery: 105 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
PLATE, ELECTRICAL SHThe contract is for the procurement of one electrical shelf plate identified by NSN 5999-01-477-6744 under solicitation SPE7M0-26-T-008Z, issued by the Defense Logistics Agency through the Maritime Supply Chain ESOC Buys office. The requirement is a simplified acquisition with a delivery deadline of five days after award, FOB origin, and a strict zero variance tolerance on quantity. The item must be packaged in accordance with MIL-STD-2073-1E using specific preservation, wrapping, and containment methods designated by QUP 001, preservation method 10, and pack code U, with all marking conforming to MIL-STD-129 and no special marking required. The sole consignee is W33RBS, 0087 CS BN CO A COMPOSITE, AWCF SSF, BLDG 1509 WEST 6TH STREET, FORT STEWART GA 31314-5185, and all shipments must be sent via fast, traceable means—parcel post is prohibited. The contract incorporates extensive technical and quality standards from the DLA Master List of Technical and Quality Requirements, including prohibitions against intentional mercury exposure except for specific functional uses defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment. Hazardous materials must comply with IP025, the Hazard Communication Standard, and FAR 52.223-3, while cybersecurity and trafficking in persons requirements are enforced through applicable FAR and DFARS clauses. All items are subject to the Buy American Act and Berry Amendment, and contractors must comply with NIST SP 800-171 assessment requirements. The award process is limited to small businesses, with mandatory representations in SAM, including socioeconomic status, and compliance with employment eligibility verification and equal opportunity provisions. Payment and delivery confirmation must be submitted electronically through WAWF, and the contractor must maintain current SAM and WAWF registrations. The contract includes clauses on changes, inspection, default, unenforceable obligations, and accelerated payments to small business subcontractors, ensuring compliance throughout the lifecycle of the delivery.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
COOLER, AIR, ELECTRON
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
FILTER, RADIO FREQUENCY
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMALThe contract solicitation SPE7M5-26-T-326Z seeks the procurement of 57 thermal resistors with NSN 5905-00-053-4559 under a Total Small Business Set-Aside, with performance required at New Cumberland, PA, and delivery due within 140 days of award. The item must meet technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, specifically referencing RA001, and is subject to Covered Defense Information requirements under RD002. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific codes for unit packaging, palletization, and lead finish identification per IPC/JEDEC J-STD-609. All hazardous materials must be labeled according to OSHA’s Hazard Communication Standard, while radioactive components exceeding specified activity levels require additional labeling per MIL-STD-129. The contract mandates full adherence to DLA packaging directive RP001, removal of government identification from non-accepted items per RQ011, and bare item marking per RQ017. The contractor must use WAWF for invoicing and receiving reports, maintain active SAM registration, be registered for WAWF, and comply with all FAR and DFARS clauses, including those related to small business representation, employment eligibility, combating trafficking, sustainable products, cybersecurity safeguards, and accelerated payments to small subcontractors. The solicitation imposes a deviation-based application of multiple FAR clauses, including 52.204-13, 52.213-4, 52.216-1, and 52.240-93, all updated under Deviation 2026-00038. All quotes must be submitted via the DIBBS portal, and the contract is subject to DPAS priority rating, domestic source restrictions under the Berry Amendment with a $150,000 threshold, and compliance with the Buy American Act. The award may prioritize HUBZone concerns if applicable, and contractors must represent small business status, joint venture affiliations, and whether they will provide covered defense telecommunications equipment. Compliance with all documentation requirements, including SAM maintenance, certified cost or pricing data under DFARS 252.215-7994, and submission deadlines, is mandatory for consideration.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELEThe contract involves the procurement of fixed electrolytic capacitors identified by National Stock Number 5910011567075, with a requirement for 329 units at a unit price of $329.000, resulting in a total contract value of $108,241. The delivery is scheduled to be completed within 289 days after order placement, with an original required delivery date of October 14, 2026, and a need ship date of May 13, 2027. Deliveries must be made FOB origin to the designated government warehouse at Tracy, California, with inspection and acceptance occurring at the destination. All items must be packaged in strict compliance with MIL-STD-2073-1E, using packaging code U, preservation method 41, unit container D3, and intermediate container D3. Marking must adhere to MIL-STD-129 with the special marking code ZZ, and each unit package must include specific lead finish labeling per IPC/JEDEC J-STD-609, identifying whether components are lead-free or contain lead, with placement following paragraph 6.2 of the standard. The contract mandates zero non-conformances in sampling inspections under MIL-STD-1916 or ASQ H1331, Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. All non-specified attributes are considered major. Compliance with hazardous material handling and labeling regulations is required under DFARS 252.223-7001, with full disclosure of hazardous materials submitted prior to award, including MSDS and proper labeling per OSHA 29 CFR 1910.1200. The contractor must also comply with cybersecurity safeguarding requirements under 252.204-7012, trafficking in persons prohibitions, employment eligibility verification, and prohibitions on covered defense telecommunications equipment. The acquisition is subject to small business program representation requirements, and the contractor must provide UEI and CAGE codes if applicable. Invoicing must be submitted electronically through WAWF, and the contract incorporates multiple FAR and DFARS clauses governing contractual obligations, including payment, subcontracting, and information safeguarding. There is no flexibility in quantity
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR ASSEMBLY
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, WIRE
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CERAMIThe contract calls for the procurement of 12 units of a fixed ceramic dielectric capacitor, identified by NSN 5910-01-174-1105 and part number 69753800-01, manufactured in accordance with Technical Data Package Rev A Gen 1 and Basic Drawing 3CYS2 69753800 dated December 30, 1974. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements through designated R and I numbering. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, and portable fluorescent lamps or instruments containing mercury must be shockproof with secondary containment as per NAVSEA 5100-003D. The product must be free of hexavalent chromium and any intentional addition of mercury. Packaging must conform to MIL-STD-2073-1E with specific parameters including QUP 001, pres method 41, and pack code U, while marking must adhere to MIL-STD-129 with special code ZZ and mandatory lead finish labeling per IPC/JEDEC J-STD-609, requiring clear identification of Pb or Pb-free status on each unit package. Delivery is required FOB origin within 161 days after receipt of order, with the original delivery date set for October 6, 2026, and a need ship date of January 5, 2027, to the designated DLA distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at destination under FAR 52.246-2, and the contract is fixed-price with no quantity variance permitted. Electronic submission of invoices and receiving reports via WAWF is mandatory, with payment processed through Wide Area Workflow. The contractor must comply with numerous FAR and DFARS clauses covering cyber incident reporting, safeguarding defense information, prohibition of covered telecommunications equipment, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, and other compliance obligations. All submissions must be made through DIBBS by July 27, 2026, and the offeror must provide representations regarding small business status, socioeconomic designations, cybersecurity controls, and adherence to all applicable
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
Federal
59--COOLER,AIR,ELECTRON
DLA Land And Maritime

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
Federal
59--FILTER,RADIO FREQUENCY
DLA Land And Maritime

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
Electrical Contact Component ManufacturingThe contract mandates the manufacture and delivery of 6,901 electrical contact units identified by NSN 5999013920861 and part number M39029/107-620, strictly adhering to the SAE AS39029E and AS39029/107C specifications and fulfilling DLA Qualified Products List requirements under FSC 5935. All units must meet rigorous military-grade standards for performance, reliability, and quality assurance to ensure compatibility and safety in defense applications. The work is to be performed in San Diego, California, with the place of performance specified by a zip code of 92136-3581, and the contract is structured as a subcontract under the NAICS code 334416 for other electronic component manufacturing. The solicitation was posted on July 26, 2026, with a required response deadline of August 6, 2026, indicating a narrow window for potential suppliers to submit proposals. The contracting activity originates from the Active Devices Division of the Department of Defense, underscoring the critical nature of the components for defense systems. While no specific point of contact or set-aside details are provided, the contract is accessible through the DIBBS platform under solicitation number SPE7M526T353X, and full compliance with all technical and certification requirements is non-negotiable for award consideration.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 335999
New
DIBBS
CONDUIT, METAL, FLEXIThe contract involves the procurement of 849 linear feet of flexible metal conduit identified by NSN 5975-01-213-7379 as a commercial off-the-shelf item under solicitation SPE7M2-26-T-5656, issued by the Department of Defense’s Nuclear Reactor Program through the Defense Logistics Agency. Delivery is required at 25600 S CHRISMAN ROAD, REC WHSE 57, Tracy, CA 95304-5000, with an established delivery window of 168 days after receipt of order, and FOB origin terms apply. The item must comply with stringent packaging and marking standards including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling and bar-coding, with commercial packaging permitted unless superseded by military specifications. DLA-specific packaging requirement RP001 is mandatory, and mercury or mercury compounds are strictly prohibited in packaging, preservation, and marking. All hazardous materials must be labeled under 29 CFR 1910.1200 and accompanied by Safety Data Sheets aligned with Federal Standard No. 313, while hexavalent chromium is explicitly banned under DFARS clause 252.223-7008. Radioactive materials, if present, require written notification, precise labeling per MIL-STD-129, and waiver requests for deviations. The contract imposes comprehensive cybersecurity obligations requiring implementation of NIST SP 800-171 controls under 252.204-7012 and 252.240-7997 to safeguard covered defense information, with mandatory cyber incident reporting. Ocean shipments must use U.S.-flag vessels unless a waiver is obtained, and contractors must submit detailed shipping documentation within 30 days. The procurement is governed by multiple FAR and DFARS clauses including 52.246-2 for destination inspection and acceptance, 52.216-1 for contract type, and 52.244-6 for subcontracting commercial products. The contracting officer may exercise changes under 52.243-1, and small business representation and employment equity provisions are incorporated. Invoicing must occur via the Wide Area WorkFlow system, and payment terms are subject to standard Federal Acquisition Regulation procedures. All
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 327213
New
DIBBS
BOTTLE FLUX DISPENS
Glass Container Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 325180
New
DIBBS
CARTRIDGE, TONERThis contract specifies the procurement of 2,048 toner cartridges under NSN 3610-01-725-1174 and part number 006R04685 from Xerox Corporation, with a unit price applied to each EA for a total estimated value. The item is classified under DLA Direct, CONUS coverage and must be delivered FOB origin within 97 days with no allowable quantity variance. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements including specific preservation methods, packaging materials, container types, and marking in accordance with MIL-STD-129. Zero special marking is required. The products must be palletized as per DLA standards and delivered to the destination point for final inspection and acceptance. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds in the cartridge or its components, except for functional mercury in approved applications such as batteries, fluorescent lamps, sensors, weapon systems, or reagents specified by NAVSEA. If mercury-containing portable fluorescent lamps or instruments are included, they must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. Documentation for source approval must meet RC001 criteria. The contract is issued under solicitation SPE7M2-26-U-0337, with a response deadline of August 11, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program.
Other Basic Inorganic Chemical Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
New
DIBBS
TEE, PIPEThis contract specifies the procurement of a copper alloy socket-type tee fitting with a nominal pipe size of 1 inch, manufactured through a metal casting process requiring specialized tooling. The item is identified by NSN 4730-00-542-5250, with a quantity of 385 units required, and delivery must be completed within 100 days of award. The solicitation is a total small business set-aside under FAR 19.5, with full and open competition applicable to eligible small businesses. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. All supplies must comply with DLA packaging standards, configuration change management procedures, and strict requirements for the removal of government identification from non-accepted items. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact surfaces, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and equipped with a secondary containment boundary per NAVSEA 5100-003D. Each delivery must be accompanied by a Certificate of Quality Compliance (COQC), with one certificate required per manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision. Suppliers must submit physical copies for government inspection at source and upload electronic copies into the iRAPT system via the Receiving Report attachment tab. All data and documentation requirements are included in the item’s price, and the contracting office is the Department of Defense’s Nuclear Reactor Program, with performance occurring in New Cumberland, PA, and primary point of contact being Alla Yakover.

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334310
New
DIBBS
HEADSET-MICROPHONE
Audio and Video Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
FENCING, WIRE
Other Fabricated Wire Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
FLANGE, PIPE
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
PUSH BUTTON
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details