CLEVIS, TOW BAR

The contract is for the procurement of 169 steel clevis tow bars designated by NSN 2540-00-589-6391 under solicitation SPE7L4-26-T-5512, issued as a Service-Disabled Veteran-Owned Small Business Set-Aside. The item is classified as a critical application product and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. Manufacturing and delivery must adhere to detailed engineering drawings, quality assurance provisions, and configuration control procedures, including mandatory first article testing as specified in FAR 52.209-3, with approval authority delegated to DCMA. The contractor must use qualified components from approved Qualified Products Lists or Qualified Manufacturers Lists and is prohibited from using ozone-depleting chemicals. All supplied items must be inspected and accepted at origin under MIL-STD-1916 or equivalent zero-based sampling standards with strict acceptance criteria: critical attributes require AQL 0.1, major attributes AQL 1.0, and minor attributes AQL 4.0. Packaging standards mandated by DLA require compliance with MIL-STD-129 and ASTM D3951 if non-hazardous, or FED-STD-313 if hazardous, with palletization following RP001 guidelines. Delivery is FOB origin within 258 days, with zero variance allowed in quantity, and must be shipped to DLA Distribution Red River in Texarkana, Texas. A separate line item exists for the first article test requirement, valued at $1.00, but is not considered a separate charge unless otherwise cited, and may be waived without award if not required. The contract enforces rigorous documentation, traceability, and compliance protocols through comprehensive CDRLs and technical data packages tied to specific drawing revisions and quality assurance standards.