RUBBER SHEET, SOLID

RUBBER SHEET,SOLID
RUBBER SHEET, SOLID
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
IN ACCORDANCE WITH THE LATEST REVISION OF MIL-PRF-6855 AND
MIL-PRF-6855/1. TYPE A, CLASS 2, GRADE 40 0.250 THICK 36 INCHES
WIDE 36 INCHES LONG SHEETS TO BE MARKED IN ACCORDANCE WITH PARAGRAPH
3.9 OF MIL-PRF-6855: PART NUMBER. MANUFACTURER'S DESIGNATION
(COMPOUND NUMBER). MATERIAL CLASS NUMBER, IMMEDIATELY FOLLOWED BY THE
MATERIAL GRADE NUMBER IN PARENTHESIS, AND THE MATERIAL TYPE. THE CURE
DATE AND "USE BY" DATE STATED BY YEAR AND QUARTER. FAILURE TO COMPLY
WILL BE CAUSE FOR REJECTION OF END PRODUCT.
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SPE7M2-26-T-5424
SECTION B
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-6855/1A NOT 2 REVISION NR A DTD 01/08/2022 PART PIECE NUMBER: M6855/1-083227
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-6855F(1) NOT 2 REVISION NR F DTD 01/08/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017364054 0001 SH 2.000
NSN/MATERIAL:9320012590781
DELIVERY (IN DAYS):0225
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
A SUITABLE PAPER OR DUSTING POWDER SHALL BE USED BETWEEN THE SHEETS EXTENDING OVER THE FULL AREA OF CONTACT BETWEEN THE SHEETS.
Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
SPE7M2-26-T-5424
SECTION B
PR: 7017364054 PRLI: 0001 CONT’D
DLA TROOP SUPPORT HAS WAIVED THE REQUIREMENTS OF
MIL-L-61002 AS CITED IN MIL-STD-129L,
MILITARY STANDARD, MARKING FOR SHIPMENT
AND STORAGE. MIL-STD-129K REQUIREMENTS
SHALL BE SUBSTITUTED IN PLACE OF MIL-L-61002
REQUIREMENTS. EXCEPT FOR THE WAIVER OF
MIL-L-61002 REQUIREMENTS, ALL OTHER
MIL-STD-129L REQUIREMENTS SHALL APPLY.
END OF MARKING WAIVER.
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/28/2028 Original Required Delivery Date:02/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017364054 0002 SH 4.000
NSN/MATERIAL:9320012590781
DELIVERY (IN DAYS):0225
SPE7M2-26-T-5424
SECTION B
PR: 7017364054 PRLI: 0002 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
A SUITABLE PAPER OR DUSTING POWDER SHALL BE USED BETWEEN THE SHEETS EXTENDING OVER THE FULL AREA OF CONTACT BETWEEN THE SHEETS.
Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
DLA TROOP SUPPORT HAS WAIVED THE REQUIREMENTS OF
MIL-L-61002 AS CITED IN MIL-STD-129L,
MILITARY STANDARD, MARKING FOR SHIPMENT
AND STORAGE. MIL-STD-129K REQUIREMENTS
SHALL BE SUBSTITUTED IN PLACE OF MIL-L-61002
REQUIREMENTS. EXCEPT FOR THE WAIVER OF
MIL-L-61002 REQUIREMENTS, ALL OTHER
MIL-STD-129L REQUIREMENTS SHALL APPLY.
END OF MARKING WAIVER.
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
A SUITABLE PAPER OR DUSTING POWDER SHALL BE USED BETWEEN THE SHEETS EXTENDING OVER THE FULL AREA OF CONTACT BETWEEN THE SHEETS.
Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
DLA TROOP SUPPORT HAS WAIVED THE REQUIREMENTS OF
SPE7M2-26-T-5424
SECTION B
PR: 7017364054 PRLI: 0002 CONT’D
MIL-L-61002 AS CITED IN MIL-STD-129L,
MILITARY STANDARD, MARKING FOR SHIPMENT
AND STORAGE. MIL-STD-129K REQUIREMENTS
SHALL BE SUBSTITUTED IN PLACE OF MIL-L-61002
REQUIREMENTS. EXCEPT FOR THE WAIVER OF
MIL-L-61002 REQUIREMENTS, ALL OTHER
MIL-STD-129L REQUIREMENTS SHALL APPLY.
END OF MARKING WAIVER.
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
PARCEL POST ADDRESS:
SW3216
DLA DISTRIBUTION PUGET SOUND
467 W STREET
BLDG 467
BREMERTON WA 98314-6001
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3216
DISTRIBUTION DEPOT PUGET SOUND
467 W STREET
BLDG 467
BREMERTON WA 98314-6001
US
Need Ship Date:06/24/2027 Original Required Delivery Date:02/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017364054 0003 SH 39.000
NSN/MATERIAL:9320012590781
DELIVERY (IN DAYS):0225
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M2-26-T-5424
SECTION B
PR: 7017364054 PRLI: 0003 CONT’D
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
A SUITABLE PAPER OR DUSTING POWDER SHALL BE USED BETWEEN THE SHEETS EXTENDING OVER THE FULL AREA OF CONTACT BETWEEN THE SHEETS.
Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
DLA TROOP SUPPORT HAS WAIVED THE REQUIREMENTS OF
MIL-L-61002 AS CITED IN MIL-STD-129L,
MILITARY STANDARD, MARKING FOR SHIPMENT
AND STORAGE. MIL-STD-129K REQUIREMENTS
SHALL BE SUBSTITUTED IN PLACE OF MIL-L-61002
REQUIREMENTS. EXCEPT FOR THE WAIVER OF
MIL-L-61002 REQUIREMENTS, ALL OTHER
MIL-STD-129L REQUIREMENTS SHALL APPLY.
END OF MARKING WAIVER.
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
A SUITABLE PAPER OR DUSTING POWDER SHALL BE USED BETWEEN THE SHEETS EXTENDING OVER THE FULL AREA OF CONTACT BETWEEN THE SHEETS.
Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
DLA TROOP SUPPORT HAS WAIVED THE REQUIREMENTS OF
MIL-L-61002 AS CITED IN MIL-STD-129L,
MILITARY STANDARD, MARKING FOR SHIPMENT
AND STORAGE. MIL-STD-129K REQUIREMENTS
SPE7M2-26-T-5424
SECTION B
PR: 7017364054 PRLI: 0003 CONT’D
SHALL BE SUBSTITUTED IN PLACE OF MIL-L-61002
REQUIREMENTS. EXCEPT FOR THE WAIVER OF
MIL-L-61002 REQUIREMENTS, ALL OTHER
MIL-STD-129L REQUIREMENTS SHALL APPLY.
END OF MARKING WAIVER.
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
A SUITABLE PAPER OR DUSTING POWDER SHALL BE USED BETWEEN THE SHEETS EXTENDING OVER THE FULL AREA OF CONTACT BETWEEN THE SHEETS.
Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
DLA TROOP SUPPORT HAS WAIVED THE REQUIREMENTS OF
MIL-L-61002 AS CITED IN MIL-STD-129L,
MILITARY STANDARD, MARKING FOR SHIPMENT
AND STORAGE. MIL-STD-129K REQUIREMENTS
SHALL BE SUBSTITUTED IN PLACE OF MIL-L-61002
REQUIREMENTS. EXCEPT FOR THE WAIVER OF
MIL-L-61002 REQUIREMENTS, ALL OTHER
MIL-STD-129L REQUIREMENTS SHALL APPLY.
END OF MARKING WAIVER.
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SPE7M2-26-T-5424
SECTION B
PR: 7017364054 PRLI: 0003 CONT’D
SAN DIEGO CA 92136-3581
US
Need Ship Date:07/01/2026 Original Required Delivery Date:02/26/2027
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0060
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE7M2-26-T-5424 NSN/Part Number: 9320-01-259-0781 Quantity: 2 SH Purchase Request: 7017364054QTY: 45 Delivery: 225 days ADO