This Solicitation opportunity from Department Of Defense was posted on August 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CONTRACTOR FIRST ARTIC
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This procurement solicits three wiring harnesses identified by NSN 6150013953530, with a requirement for contractor first article testing using a two-unit sample, as mandated under FAR 52.209-3 Alternate I. The item is subject to origin inspection and acceptance per RQ009 and FAR 52.246-2, with sampling conducted in accordance with MIL-STD-1916, ASQ H1331 Table 1, or another comparable zero-based sampling plan; unspecified attributes are treated as major with an AQL of 1.0. Critical, major, and minor attributes are assigned verification levels VII, IV, and II, respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Packaging must comply with DWG 12324532 and SPI# AM12324532 REV A, aligned with MIL-STD-2073-1E and DLA packaging requirements, with exceptions replacing MIL-M-81594 with SAE-AS5942 and modifying Step 4 on Drawing PD-12324532-2 to specify ASTM D6123 tape, MIL-DTL-117 Class E Type II bag, ASTM D5118 ST-OPF GR-W5C box, and ASTM D1974 Sealing Method B closure. The item carries no shelf life requirement and is governed by a 346-day delivery schedule, with FOB origin terms and delivery to DLA Distribution Anniston, Alabama. Export-controlled technical data is subject to ITAR or EAR regulations, requiring prior authorization for any disclosure to foreign persons, with access restricted to contractors holding an approved US/Canada Joint Certification Program certification, having completed mandatory DLA training, and receiving explicit authorization. Contractor invoicing must occur electronically via WAWF, using cost vouchers for cost-type line items and invoices with receiving reports for fixed-price items. Compliance with ISO 9001:2015 or equivalent quality systems is required, and the contractor must adhere to all applicable defense and federal acquisition regulations, including DFARS 252.204-7012 for safeguarding covered defense information, DFARS 252.223-7008 prohibiting hexavalent chromium, and DF
General Info
Agency
NAICS
Place of Performance
7 FRANKFORD AVE BLDG 362, ANNISTON, AL, 36201-4199, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
RD002, COVERED DEFENSE INFORMATION APPLIES
WIRING HARNESS INCLUDE RA001 OBJECT TEXT ID ST LANGUAGE E
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
POT EXCEPTIONS: 1) REPLACE SPEC. #MIL-M-81594, WITH #SAE-AS5942. (2) ON
DRAWING #PD-12324532-2 DELETE ENTIRE STEPS AND REPLACE WITH: 1. TAPE,
#ASTMD6123/D6123M SEE NOTE A; 2. BAG, #MIL-DTL-117 CLASS E TYPE II; 3.
BOX, #ASTM D5118/D5118M ST-OPF GR-W5C; 4. CLOSURE, #ASTM D1974/D1974M
SEALING METHOD B.
CONTRACTOR FIRST ARTICLE TESTING (C-FAT), TWO UNIT SAMPLE.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RT001: MEASURING AND TEST EQUIPMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000053 Quantity: 3 EA Purchase Request: 7017741771QTY - See Solicitation Delivery: 346 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS