Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTRACTOR FIRST ARTIC

Active
SPE8ED-26-T-1237Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three collapsible fabric tanks, each identified by NSN 5430015277233 and part number ATPD2295 Class I Type I, with an additional line item for a first article test requirement. Each tank is priced at $3.00, with a total quantity of three units, and delivery is required within 20 days FOB origin with no tolerance for quantity variance. The product must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, with palletization governed by DLA Packaging Requirements, and hazardous material handling follows TQ requirement IP025 per FED-STD-313. Inspection and acceptance occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposals, and the contractor must implement a quality system certified to ANSI/ISO/ASQ 9001-2015 excluding paragraph 7.3. All items must be marked per MIL-STD-130N and shipped by traceable means only, delivered to the designated military facility at Camp Lejeune, North Carolina. The first article test, listed as a separate line item with one unit, is mandatory and non-reimbursable unless specifically waived, and its completion is a precondition for production delivery. The contract incorporates detailed technical documentation referenced through drawing and quality assurance provision numbers, with all data available through the DLA’s eProcurement portal during the solicitation window.

General Info

Three collapsible fabric tanks at $3 each, delivered in 20 days FOB origin, compliant with military standards, first article test required.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

PSC BOX 20131, CAMP LEJEUNE, NC, 28542-0131, US

Set-Aside

NONE

Documents

(1)

SPE8ED-26-T-1237.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
View Agency Profile
Office AddressUS
Contacts
Ogden Howard
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TANK,FABRIC,COLLAPS
TANK, FABRIC, COLLAPSIBLE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
SPE8ED-26-T-1237
SECTION B
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
52.246-11 Higher-Level Contract Quality Requirement (Feb 1999) ANSI/ISO/ASQ Q9001-2015(excluding para 7.3) or equivalent. Certification or registration of a contractor's quality system or program is not required by DoD if ISO or ANSI/ASQ standards are used.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC DRAWING NR 19207 ATPD2295CLASS1TYPE1 REVISION NR DTD 07/11/2023 PART PIECE NUMBER: ATPD2295 CLASS I TYPE I
TDP Rev B Gen 2 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 ATPD2295ACLASS1TYPE1 REVISION NR A DTD 02/01/2007 PART PIECE NUMBER: ATPD2295 CLASS I TYPE I
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR DTD 08/26/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017739152 0001 EA 3.000
NSN/MATERIAL:5430015277233
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
SPE8ED-26-T-1237
SECTION B
PR: 7017739152 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
M21310
COMMANDING OFFICER
8TH ESB 2D MLG
PSC BOX 20131
CAMP LEJEUNE NC 28542-0131
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M21310
DISTRIBUTION MANAGEMENT OFFICE
BLDG 1012,O STREET BAY#8
M/F M21310 8TH ESB 2D MLG
CAMP LEJEUNE NC 28547-2503
US
M/F: (TCN) M2131062150031
RDD:
PROJ: TP 3
SUPP ADD: YUT SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: ADV: FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8ED-26-T-1237
SECTION B
PR: 7017738467 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017738467 0001 EA 3.000
NSN/MATERIAL:5430015277233
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
M21310
COMMANDING OFFICER
8TH ESB 2D MLG
PSC BOX 20131
CAMP LEJEUNE NC 28542-0131
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M21310
DISTRIBUTION MANAGEMENT OFFICE
SPE8ED-26-T-1237
SECTION B
PR: 7017738467 PRLI: 0001 CONT’D
BLDG 1012,O STREET BAY#8
M/F M21310 8TH ESB 2D MLG
CAMP LEJEUNE NC 28547-2503
US
M/F: (TCN) M2131062150029
RDD:
PROJ: TP 3
SUPP ADD: YUT SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: ADV: FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017739101 0001 EA 3.000
NSN/MATERIAL:5430015277233
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
SPE8ED-26-T-1237
SECTION B
PR: 7017739101 PRLI: 0001 CONT’D
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
M21310
COMMANDING OFFICER
8TH ESB 2D MLG
PSC BOX 20131
CAMP LEJEUNE NC 28542-0131
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M21310
DISTRIBUTION MANAGEMENT OFFICE
BLDG 1012,O STREET BAY#8
M/F M21310 8TH ESB 2D MLG
CAMP LEJEUNE NC 28547-2503
US
M/F: (TCN) M2131062150030
RDD:
PROJ: TP 3
SUPP ADD: YUT SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: ADV: FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
SPE8ED-26-T-1237
SECTION B
PR: PRLI: CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0000
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE8ED-26-T-1237 NSN/Part Number: 0001S00000053 Quantity: 3 EA Purchase Request: 7017739152QTY - See Solicitation Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E6-26-T-3989
The contract is for the procurement of 3 sheets of solid rubber material, measuring 0.250 inches thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides. The item is identified by NSN 9320-00-042-3117 and is being acquired under solicitation SPE8E6-26-T-3989, with a response deadline of August 17, 2026. The delivery is scheduled 167 days after contract award. The specification prohibits the presence of asbestos as defined in FED-STD-313 and mandates compliance with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with acceptance criteria requiring zero non-conformances unless otherwise stated in the contract. Attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The procurement is fully competitive under a federal or military specification, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002. The contracting office is the DLA New Cumberland Facility under the Department of Defense, with Ryan Kirlin designated as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E6-26-T-3990
The contract is for the procurement of five rubber sheets, solid, with dimensions of 36 inches in length, 36 inches in width, and 0.125 inches in thickness, smooth on both sides. The item is identified by NSN 9320-00-061-0675 and is governed by DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The specification mandates compliance with procurement clause 52.211-9G03 regarding the marking of individual sheets, and covered defense information may apply. Government identification must be removed from non-accepted supplies. Delivery is required within 167 days after order, under purchase request 7017758597. The solicitation number is SPE8E6-26-T-3990, issued on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 326299, and the contracting office is the DLA New Cumberland Facility under the Department of Defense. The primary point of contact is Christopher Barraro, reachable via email and phone provided. The place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
COVERALL, FLOTATION
Solicitation # SPE8E9-26-T-3365
The contract pertains to the procurement of 8 units of a flotation coverall, identified by NSN 4220-01-486-8281 and manufacturer part number MS2175GS-2-XXL from MUSTANG SURVIVAL MFG, INC, under solicitation SPE8E9-26-T-3365. Delivery is required within 167 days of contract award, with a final delivery deadline of February 1, 2027, and the items must be shipped FOB origin. The unit price is $8.00 per unit, totaling $64.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering to all applicable DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 guidelines. The item has a mandatory 120-month shelf life with no extension permitted. Mercury or mercury-containing compounds are strictly prohibited except in limited functional applications such as batteries, fluorescent lamps, or specified instruments, with any portable devices containing mercury required to have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery address is DLA Distribution’s New Cumberland facility in Pennsylvania, and the unit of issue is each (EA). The contract references restricted defense information and mandates compliance with all relevant DoD procurement and environmental safety standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, CELLUL
Solicitation # SPE8E6-26-T-3988
The contract pertains to the procurement of rubber sheet, cellular, with specific technical and quality requirements outlined under NSN 9320-00-069-5176. The material must be 1/16 inch thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides, and strictly prohibits the use of asbestos as defined in FED-STD-313. An exception to AMS 3195 Revision C allows the low temperature brittleness test to replace the compression deflection at low temperature test. The specification references the DLA Master List of Technical and Quality Requirements for additional technical and quality criteria identified by R or I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are deemed major. Zero non-conformances are required in sampling unless otherwise stated. Government identification must be removed from non-accepted supplies. The item is procured as fully competitive under a federal specification. Forty-eight units are required under purchase request 7017758593, with delivery due within 63 days of award. The solicitation, issued under SPE8E6-26-T-3988, opened on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through the Cherry Point location, with Christopher Barraro as the primary point of contact.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
BLOCK, RUBBER
Solicitation # SPE8E6-26-T-4040
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
Nonmetallic Hose Assembly SupplyThe contract is for the supply of a commercial off-the-shelf nonmetallic hose assembly with a 0.310-inch inner diameter and a total length of 23.0 inches, strictly adhering to the designated National Stock Number and approved manufacturer part numbers. The item must meet all technical and compliance requirements specified for use within Department of Defense systems, ensuring interoperability and reliability under operational conditions. The solicitation is issued as a subcontract under NAICS code 326299 and is being managed by the Maritime Supply Chain ESOC Buys group within the Department of Defense. The contract was posted on August 4, 2026, with a firm response deadline of August 17, 2026, and the place of performance is designated as Tampa, Florida, with a zip code of 33614-6409. All proposals must align with the exact dimensional and material specifications outlined, and only assemblies sourced from approved manufacturers will be considered. The procurement is conducted through the DIBBS platform, and interested parties are required to review the full solicitation details via the provided link to ensure complete compliance with submission protocols and technical requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
Precision O-Ring Manufacturing and Supply
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
BOOT, DUST AND MOISTURE
Solicitation # SPE7LX-26-U-9264
This contract involves the procurement of 4,574 units of a boot, dust, and moisture seal designated by NSN 5340-01-108-3681, intended for use on rotor blades and governed by a source-controlled drawing that restricts approved suppliers to those explicitly listed, though additional qualified sources may exist. The requirement is part of a Women-Owned Small Business Set-Aside under NAICS code 326299, with a response deadline of August 19, 2026, and delivery must occur within 104 days of award. All items must comply with strict technical and quality standards referenced in the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitutes requiring prior approval. The product incorporates technical data subject to export control under ITAR or EAR, mandating compliance with DFARS 252.225-7048; only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access or handle this data. Additionally, cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and all delivered supplies must adhere to DLA packaging guidelines while ensuring government identification is removed from non-accepted items.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-Q-1394
The contract is for the procurement of 15,000 units of a molded track cushioning pad assembly, identified by NSN 5340-01-587-6763, under solicitation SPE7L1-26-Q-1394. Delivery is required within 146 days of award, with the solicitation issued on August 4, 2026, and responses due by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies prior to delivery. The item includes technical data subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this controlled data. The acquisition falls under NAICS code 326299 and is managed by the Department of Defense’s Land Supply Chain, with Rodney McNinch listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
BELT, V
Solicitation # SPE7L3-26-T-146Z
This contract is for the procurement of one Belt, V with NSN 3030-01-539-5803 under solicitation SPE7L3-26-T-146Z, issued by the Department of Defense through Land Supplier Operations Vehicle Support. The item must be delivered within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods, wrapping, and marking requirements. The delivery address is the Distribution Management Office at Twenty-Nine Palms, California, with a designated shipping point and a unique military freight identifier for tracking. Shipment must use traceable freight methods; parcel post is prohibited. The required delivery date is August 5, 2026, and the solicitation closed on August 17, 2026, with technical and quality requirements governed by the DLA Master List referenced in the contract. All packaging and marking must align with DLA packaging directives, and the item’s unit of issue is each, with a total price of $1.00. The contract includes specific government-only fields for internal tracking and distribution codes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
FLAME ARRESTER, VENT
Solicitation # SPE8ED-26-T-1217
The contract specifies the procurement of one flame arrester, vent with NSN 5430-01-724-2662 and part number 60-1006RK-01 from RKI INSTRUMENTS, INC., under solicitation SPE8ED-26-T-1217. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination facility. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes considered major. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes commercial standards like ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements RP001, with hazardous material handled according to TQ requirement IP025 and non-hazardous material commercially packaged per ASTM D3951 when not overridden by DLA requirements. All packaging must be marked and labeled appropriately, and palletization must follow DLA standards. The material must be shipped by the fastest traceable means, with parcel post prohibited, and delivered to Sierra Army Depot in Herlong, CA. The required delivery date is July 24, 2026, and government-use identifiers and shipping instructions are strictly defined, including a designated point of contact and electronic procurement link.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
MASK, RESPIRATOR
Solicitation # SPE2DS-26-T-309Y
The contract is for the procurement of N95 disposable particulate respirators in small size, packaged in cases containing eight boxes of twenty respirators each, totaling 160 units per case. Each unit must be sealed in a protective container to prevent damage and shipped in commercial exterior containers suitable for safe delivery via common carrier at the lowest cost to the designated delivery point. Packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all items must be properly labeled in accordance with this standard. The shelf life for this Type I item is 108 months and is non-extendable, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. The units are identified by NSN 6515-01-496-0850, and the bid specifies a quantity of three boxes, with delivery required within ten days of award. The solicitation number is SPE2DS-26-T-309Y, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 326299, with responses due by August 10, 2026. The primary point of contact is Michael Small, reachable via email and phone provided in the contract details.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

NAICS: 333310
New
DIBBS
MANIFOLD, STEAM COIL
Solicitation # SPE8ED-26-T-1227
The contract is for the procurement of 14 units of a MANIFOLD, STEAM COIL with NSN 3510-01-148-1692 and part number TU2413, supplied by EDRO CORPORATION DBA DYNAWASH. Delivery is required within 167 days, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The unit price is $14.00, resulting in a total contract value of $196.00. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special markings. The contract prohibits intentional inclusion of mercury or mercury compounds in the supplied hardware except for specific exempted applications such as functional components in batteries, lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. All documentation must adhere to DLA packaging, shipping, and source approval procedures, and transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8ED-26-T-1227, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333310, and the point of contact is Takawira Ndiripo.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CUSHION, BOTTOM, EXPL
Solicitation # SPE8ED-26-T-1223
The item is a cushion designed for bottom use in a shipping and storage container, identified by NSN 8135-01-029-1285, with a quantity of 52 units required under purchase request 7017758186. Delivery is scheduled 167 days after award. The solicitation number is SPE8ED-26-T-1223, posted on August 5, 2026, with responses due by August 17, 2026. This procurement falls under NAICS code 336413 and is managed by the Department of Defense under the Construction & Equipment Containers organization, with performance to be completed in Tracy, California, 95304-5000. Ogden Howard is the primary point of contact, reachable via email and phone provided. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting its disclosure or transfer to foreign persons, regardless of location, including employees of foreign subsidiaries of U.S. companies. Access to this controlled data is limited to DLA contractors with an approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled technical data and have been formally authorized by DLA. Compliance with DFARS 252.225-7048 is required, and failure to adhere to these controls may result in legal penalties. The solicitation is publicly accessible through the DIBBS system.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1238
The contract pertains to the shipping and storage of four units identified by NSN 8145-01-715-7517 under solicitation SPE8ED-26-T-1238, with a delivery deadline of 167 days from award. The supplier must comply with rigorous quality and technical requirements, including adherence to MIL-STD-1916 or ASQ H1331 sampling standards, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampling unless otherwise stipulated, and manufacturers may choose attribute or variable inspection methods. The item is subject to export controls under ITAR or EAR, restricting technical data access to contractors with a valid US/Canada Joint Certification Program certification, completion of required DOD export control training, and approved access through DLA. All technical data is governed by DFARS 252.225-7048 and may not be disclosed to foreign persons regardless of location. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. Design drawings are accessible only during open solicitation via the DIBBS portal. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and performance is to be delivered to New Cumberland, PA, 17070-5002. Primary point of contact is Ogden Howard at the Defense Logistics Agency.
Other Metal Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1234
This contract, issued under solicitation SPE8ED-26-T-1234 by the Department of Defense’s Defense Logistics Agency, requires Pelican Products, Inc. to supply three units of item 8145016806074 at a unit price of $3.00, totaling $9.00, with delivery due within 167 days from the award date, no later than February 1, 2027. Goods must be shipped FOB origin with zero variance in quantity and inspected at destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting industry standards, and packaging must follow ASTM D3951 as supplemented by MIL-STD-129 for labeling and marking, in strict accordance with DLA Packaging Requirements for Procurement. Palletization and unit packaging must adhere to the specified QUP and UI standards, and all government identification must be removed from non-accepted supplies. Delivery is directed to the specified receiving warehouse in Tracy, California, under transportation guidelines C19 and C20, with full and open competition in effect. The contract incorporates technical specifications referenced by R and I numbers from the DLA database, and the awarded supplier is obligated to meet all quality, packaging, and documentation criteria without exception.
Other Metal Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
DIBBS
BELT, ARM SHAFT
Solicitation # SPE8ED-26-T-1222
The contract specifies the procurement of 34 units of a BELT, ARM SHAFT with NSN 3530-00-845-0805 under solicitation SPE8ED-26-T-1222, with a required delivery date of November 26, 2026, and a delivery window of 167 days. The item is to be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit containment, and marking must adhere to MIL-STD-129 with no special marking codes. Palletization follows DLA’s packaging requirements, and the shipment is destined for DDSP New Cumberland, PA. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II (or AQLs of 0.1, 1.0, and 4.0). Unspecified attributes are deemed major, and acceptance requires zero non-conformances unless otherwise stated. Mercury and mercury-containing compounds are prohibited unless exempted for specific functional applications like batteries or sensors, and portable items containing mercury must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List, with revisions controlled by the solicitation or award date. The purchase request is 7017757874, and the point of contact is Takawira Ndiripo at DLA.
All Other Industrial Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1232
This contract pertains to the procurement of two shipping and storage containers with part number 890325 and NSN 8145-01-632-9661 under solicitation SPE8ED-26-T-1232, issued by the Department of Defense through the Defense Logistics Agency. The items must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements—identified by R or I numbers and accessible via the official DLA website—take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must conform to RP001: DLA Packaging Requirements for Procurement. The United States Government requires removal of all government identification from non-accepted supplies, and the containers are subject to inspection and acceptance at the destination point. Delivery is mandated FOB origin, with a required delivery window of 167 days from the contract award and an original required delivery date of November 6, 2026. The final shipment must be completed by February 1, 2027. The quantity is fixed at two units with zero tolerance for variance. Freight shipments must be directed to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, as specified in DLAD Proc Note C19 and C20 for transportation protocols. The contract specifies a unit price of $2.00 per item, totaling $4.00. The supplier, Paratech, Incorporated, must comply with all technical, quality, and logistical standards outlined, including handling of Covered Defense Information as defined under RD003. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 336413 for defense equipment manufacturing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
DIBBS
SEWING MACHINE, INDUSTR
Solicitation # SPE8ED-26-T-1225
An industrial sewing machine, fully assembled with a table top and stand, is required in four units, operating on 110/220V AC at 60 Hz single phase, meeting the military specification OO-S-256/5A Type 308 Class 1 for table components and motor. Each unit must be packaged in a single box compliant with ASTM D 5168 Style B or C, including reinforced corners, and placed on one heat-treated pallet per item with explicit labeling prohibiting stacking. The delivery must include one complete set of manuals and an extra parts manual, with the additional manual specifically directed to DLA Troop Support at the Philadelphia address provided. Origin inspection is mandatory, and the use of ozone-depleting substances is prohibited. The procurement adheres to the DLA Master List of Technical and Quality Requirements, with RA001 and RP001 referencing applicable technical, quality, and packaging standards. CDRLs including shipping manuals and DD Form 1423s are required, and compliance with the DLA Technical Data Package is essential. This item is procured under NSN 3530-01-182-9559 with a delivery timeline of 167 days ADO, under solicitation SPE8ED-26-T-1225 issued August 5, 2026, and responds to a Federal specification with no set-aside, managed by the Department of Defense through the Construction & Equipment Containers organization, with point of contact Takawira Ndiripo available for inquiries.
All Other Industrial Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
INSERT, CONTAINER
Solicitation # SPE8ED-26-T-1226
The contract pertains to the procurement of an INSERT, CONTAINER with NSN 8115-01-371-4882, specified under solicitation SPE8ED-26-T-1226, with a requirement for 38 units delivered FOB origin within 167 days of award, originally due by November 29, 2026. The item is identified by part numbers P01305 from GENERAL ATOMICS AERONAUTICAL SYSTEMS INC and PRC 102438 from PRC COMPOSITES, LLC, both subject to DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. The unit of issue is each (EA) at a unit price of $38.00, totaling $1,444.00, with zero variance permitted on quantity. Inspection and acceptance occur at destination, and government identification must be removed from non-accepted supplies. Delivery is directed to DLA Distribution San Joaquin in Tracy, CA, and transportation logistics follow DLAD Proc Note C19 and C20. The contract includes provisions for Covered Defense Information and mandates adherence to DLA’s authorized units of issue as defined in their official documentation. The solicitation was posted August 5, 2026, with responses due August 17, 2026, and the required ship date is February 1, 2027.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1231
The contract outlines the procurement of four units of a shipping and storage container with part number T00382-5083 and NSN 8145015894686, sourced from TERRA GROUP CORP. and delivered to the Defense Logistics Agency warehouse in Tracy, California. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, requiring compliance with MIL-STD-129 for marking and labeling, and RP001 for palletization. The delivery is FOB origin with no tolerance for quantity variance, inspection and acceptance both occur at destination, and the required delivery date is 167 days from contract award, with an original deadline of January 3, 2027 and a needed ship date of February 1, 2027. Technical and quality requirements identified by R or I numbers are incorporated by reference from the DLA Master List, and covered defense information applies. The unit of issue is each, priced at $4.00 per unit, totaling $16.00, under solicitation SPE8ED-26-T-1231, with freight and delivery addressed to the designated DLA receiving warehouse. All packaging and shipping must follow DLA procedural notes C19 and C20, and the contractor must remove any government identification from non-accepted supplies as per RQ011.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
HEATING COIL, STEAM
Solicitation # SPE8ED-26-T-1224
This contract specifies the procurement of a steam heating coil with NSN 3510-01-031-5634 and part number TU1699P, for a quantity of six units to be delivered within 167 days to the designated receiving warehouse in Tracy, California. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including palletization per DLA packaging standards. The item must include weatherproof protection if destined for overseas or FMS customers, and all markings must conform to specified guidelines with no special marking required. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplied hardware, with exceptions limited to functional components in batteries, fluorescent lamps, instruments, sensors, weapon systems, and specific chemical reagents approved by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. Technical and quality requirements are incorporated by reference from the DLA Master List, and documentation for source approval must adhere to RC001. The contract is issued under solicitation SPE8ED-26-T-1224 with a required ship date of February 1, 2027, and original delivery date of February 4, 2027, and the unit of issue is each. The purchasing request number is 7017758184, with no variance allowed in quantity. All shipments must reference DLA procedural notes C19 and C20 for transportation and freight shipping instructions, and the designated point of contact is Takawira Ndiripo.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
LINER, DRUM
Solicitation # SPE8ED-26-T-1229
The contract is for a 55-gallon, 10-mil thickness seamless corrugated-accordion liner drum with an outer diameter of 23.500 inches and a height of 34.375 inches, supplied in units of 20 per box, with a total quantity of 56 boxes required. The item is identified by NSN 8110-01-334-3149 and is part of a solicitation issued under number SPE8ED-26-T-1229 with a response deadline of August 17, 2026, and an anticipated delivery date 167 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Covered defense information potentially applies, and offerors must provide a complete data package for both the approved and alternate parts since no existing data is available. The place of performance is New Cumberland, PA, 17070-5002, and the primary point of contact is Ogden Howard at ogden.howard@dla.mil or 445-737-1263.
Other Metal Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
WASHER-DRYER, HOUSEH
Solicitation # SPE8ED-26-T-1233
The contract is for the procurement of 18 household washer-dryer units under the NSN 3510-01-729-2494, with the purchase request number 7017757066, issued by the Defense Logistics Agency under solicitation SPE8ED-26-T-1233. The items must be supplied by either Intrinion Corporation or Maytag Corporation under the part number MLE22PRAYW, and delivery is required within 81 days to the designated receiving warehouse in Tracy, California. The units must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. All packaging must adhere to DLA packaging requirements, and palletization must follow specified standards. The contract specifies FOB origin delivery, zero variance in quantity, and inspection and acceptance at the destination point. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition. The contract applies to a Women-Owned Small Business Set-Aside, with the NAICS code 333310, and is subject to applicable defense information handling protocols. The need ship date is July 30, 2026, and the original required delivery date is December 29, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details