This Solicitation opportunity from Department Of Defense was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CONTRACTOR FIRST ARTIC

Closed

SPE4A6-26-T-15TAFederal

Submission Closed08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7LX-26-T-1117

Solicitation SPE7LX-26-T-1117 is a Request for Quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of 97 units of Jack-Support Shoes (NSN 4940-01-678-9226). This is a total small business set-aside under NAICS 334419, with a specific preference for JLTVCI Small Business Prime Contract holders. The procurement requires adherence to multiple technical drawings and quality standards, including the DLA Master List of Technical and Quality Requirements. Delivery is specified as FOB Origin with a delivery period of 168 days, and the items are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Award decisions will be based on fair and reasonable pricing, quality, and delivery terms, with the potential to convert to a FAR Part 13 Simplified Acquisition if initial pricing is not found to be fair and reasonable.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7M1-26-U-6084

Solicitation SPE7M1-26-U-6084 is a request for quotations issued by DLA Land and Maritime for the procurement of crystals under NSN 5955011719812. This procurement is a Total Small Business Set-Aside under NAICS code 334419 and may result in a unilateral Simplified Indefinite-Delivery Contract (SIDC) with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual demand is 37 units, with a guaranteed minimum quantity of 5. Quotes must be submitted electronically by September 25, 2026, and the award will be based on the price quoted for the estimated annual demand and the responsibility of the offeror. Deliveries are to be made within the continental United States with a delivery period of 102 days. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Hazardous materials must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment, and safeguarding covered defense information.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6632

This solicitation is for the procurement of nine sensitive switches under part number 5930-01-264-1728 for the Department of Defense Electrical Devices Division. The contract is a total small business set-aside with a delivery requirement of 330 days after receipt of order. Performance is designated for Tinker AFB. The agreement mandates strict adherence to DLA packaging requirements and quality assurance sampling plans, specifically referencing MIL-STD-1916 or ASQ H1331. Additionally, the contract contains stringent export control regulations under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training to handle the associated technical data.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

49--ADAPTER,CYLINDER COMPR

Solicitation # SPE7M1-26-U-6082

Solicitation SPE7M1-26-U-6082 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of eight Cylinder Compression Tester Adapters (NSN 4910007957961). This is a source-controlled drawing item with approved sources 05083 70-0300 and 1T973 8743025. The procurement may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The guaranteed minimum quantity is one unit, with an estimated annual order of one. Quotes must be submitted electronically via the DLA Internet Bid Board System by September 25, 2026. Award may be automated, with evaluation based on the price quoted for estimated annual demand and a preference for HUBZone concerns. Delivery is required within 83 days after the order is placed, with shipping terms set as FOB Origin to various CONUS and OCONUS DLA Depots. Inspection and acceptance will occur at the destination. The contract requires compliance with NAICS code 334419 and incorporates various FAR and DFARS clauses, including those for the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Invoicing and payment processing must be conducted through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

59--OSCILLATOR,NONCRYST, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBA16

This solicitation from Navsup Weapon Systems Support seeks a contractor to perform the repair, overhaul, and testing of non-crystal oscillators (NSN 5955014262653, Part Number 459525) to return them to a Ready For Issue condition. The work must be performed in accordance with the latest approved methods and publications, with all activities subject to the terms of Basic Ordering Agreement N00383-26-G-0017. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, and must maintain a quality management system compliant with ISO 9001 or SAE AS9100. Key contractual provisions include specific protocols for identifying items that are Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from DCMA and the Procuring Contracting Officer. The contract mandates strict adherence to configuration management and prohibits part cannibalization without specific approval. The response deadline for this requirement has been extended to October 13, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0010426QUC09

This solicitation from the Navsup Weapon Systems Support Mech is for the procurement or repair of a Gun Recoil Compressor. The contract requires the awardee to be an authorized source, with distributors providing official OEM authorization. It specifies a firm-fixed price and, in the case of repair services, a requested turnaround time of 180 days. Failure to meet this turnaround time may result in a price reduction via a reconciliation modification. Key requirements include adherence to MIL-STD packaging and IUID standards per DFARS 252.211-7003. The contract is issued bilaterally, requiring written acceptance from the contractor. All quotes and certifications must be submitted electronically to the designated point of contact. The scope also includes strict quality assurance protocols, government source inspection, and specific guidelines for reporting design or part number changes.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-270S

Solicitation SPE7MC-26-T-270S is a request for quotations issued by DLA Land and Maritime for the procurement of 31 sensitive switches under NSN 5930012856539. The procurement is categorized under NAICS 334419 and requires the items to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. Approved sources for this item include 35795 50008P0X9, 35795 6046-C-13, and 35795 N50008P0X9. The contract specifies that preservation and packaging must adhere to the latest revision of MIL-DTL-28786, with marking following MIL-STD-129 and packaging data governed by MIL-STD-2073-1E. Inspection and acceptance will take place at the destination. Payment and invoicing must be processed through the Wide Area Workflow system. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions and includes various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity assessment standards. Delivery is expected by February 9, 2027, with an original required delivery date of December 31, 2028.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7M1-26-U-6083

Solicitation SPE7M1-26-U-6083 is a request for quotations issued by the Department of Defense Maritime Supply Chain for the procurement of electrical capacitors, identified by NSN 5999000336574. The procurement is intended to result in a unilateral Indefinite Delivery Contract (IDC) with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual quantity is 1,142 units, with a guaranteed minimum of 171 units and an expected average of two orders per year. Quotations are due by September 25, 2026, and must be submitted electronically. The contract requires delivery within 106 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Items will be shipped to various CONUS and OCONUS DLA Depots. Compliance with strict packaging and marking standards is mandatory, including MIL-STD-129, MIL-STD-2073-1E, and ASTM-D3951, with a specific prohibition on the use of mercury or mercury compounds. Additionally, the contractor must adhere to the Buy American Act and Berry Amendment restrictions, and all payment requests must be processed electronically through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6621

This contract, solicitation number SPE7M8-26-T-6621, is issued by the Department of Defense Electrical Devices Division for the procurement of 27 push-button switches. The items are identified by NSN 5930-01-231-3697 and part number 631260-006 from Staco Systems, Inc., adhering to specific technical data packages and drawings. This is a Women-Owned Small Business set-aside procurement under NAICS code 334419. The delivery requirement is set for 200 days after the order, with a need ship date of April 10, 2027, and a required delivery date of April 11, 2027. Shipping is FOB Origin, with the destination and inspection point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging standards such as MIL-STD-129 and RP001, and notes that the material is a critical application item with no shelf life requirement.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

59--FILTER ELEMENT,FLUID

Solicitation # SPE7M0-26-T-081T

Solicitation SPE7M0-26-T-081T is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 15 fluid filter elements under NSN 5999017319656. This procurement is designated as a Total Small Business Set-Aside under NAICS code 334419. Approved sources include L3Harris Maritime Power and Energy (P/N 119970-E00) and Niantic Seal Inc (P/N NS110824-05-45). The delivery requirement is five days after the award, with the place of delivery specified as PCU Bougainville (LHA 8) in Gulfport and Pascagoula, Mississippi. Inspection and acceptance will occur at the destination. Quotes must be submitted electronically via the DIBBS system by September 21, 2026. The contract requires adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All offers must be based on FOB Origin. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed through the Wide Area WorkFlow system. Additionally, the solicitation prohibits the use of additive manufacturing for the supplied parts unless specifically authorized.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6623

Solicitation SPE7M8-26-T-6623 is a Request for Quotations issued by the DLA Land and Maritime Electrical Devices Division for the procurement of three switch assemblies under NSN 5930012233397. This is a total small business set-aside under NAICS code 334419. The delivery is required within 133 days after receipt of order, with the shipping point designated as FOB Origin and the delivery destination as DLA Distribution Warner Robins in Georgia. Inspection and acceptance will occur at the destination. Quotes must be submitted electronically via the DIBBS system by September 21, 2026. The procurement incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and requires compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 Self-Assessment. Packaging must adhere to MIL-STD-129 and RP001, with specific hazardous material requirements following TQ IP025 and the Hazard Communication Standard. Payment and invoicing will be processed electronically through the Wide Area WorkFlow system. Offers utilizing additive manufacturing are ineligible for award unless specifically authorized.

ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 9 days

AI Contract Overview

This contract is for the procurement of special purpose electrical cable assemblies under solicitation SPE4A6-26-T-15TA. The requirement includes multiple line items for NSN 6150014956270, with deliveries split between DLA Distribution Albany and DLA Distribution Barstow. The contract specifies a delivery timeframe of 425 days and requires strict adherence to technical drawings and quality standards, including ISO 9001:2015 and CMMC Level 2 self-assessment for cybersecurity. Key compliance requirements include physical identification and bare item marking per RQ017, and packaging and palletization according to MIL-STD-2073-1E and RP001. Inspection and acceptance will occur at the origin. Additionally, the contract includes a First Article Test requirement to verify product quality before full delivery. Sampling and verification must follow MIL-STD-1916 or ASQ H1331 standards.

General Info

Procurement of electrical cable assemblies for DLA with 425-day delivery and quality compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

814 RADFORD BLVD BLDG 1221 DOOR 20, ALBANY, GA, 31704-1128, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A6-26-T-15TA

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 11

Solicitation

Response DeadlineAug 19

Deadline has passed

Submission Closed

08/19/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

THANH HUE Nguyen

contact@example.gov

+1 (555) 000-0000

Full Description

CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICA
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SPE4A6-26-T-15TA
SECTION B
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev C Gen 3 IAW BASIC DRAWING NR 01365 00004A0701 REVISION NR A DTD 06/14/2006 PART PIECE NUMBER: 0004A0701-1
TDP Rev C Gen 3 IAW REFERENCE DRAWING NR 01365 00004A3581 REVISION NR A DTD 06/14/2006 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE DRAWING NR 01365 00004A0701 REVISION NR A DTD 06/14/2006 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE DRAWING NR 01365 00004A3556 REVISION NR A DTD 05/28/2024 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE DRAWING NR 01365 00004A3588 REVISION NR B DTD 04/15/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017837107 0001 EA 2.000
NSN/MATERIAL:6150014956270
DELIVERY (IN DAYS):0425
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE4A6-26-T-15TA
SECTION B
PR: 7017837107 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY
TRANSPORTATION OFFICER
814 RADFORD BLVD BLDG 1221 DOOR 20
ALBANY GA 31704-1128
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY DDAG-T
MCLB BLDG 1221 DOOR 20
814 RADFORD BLVD
ALBANY GA 31704-1128
US
Need Ship Date:06/01/2028 Original Required Delivery Date:03/28/2028
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017837107 0002 EA 14.000
NSN/MATERIAL:6150014956270
DELIVERY (IN DAYS):0425
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
SPE4A6-26-T-15TA
SECTION B
PR: 7017837107 PRLI: 0002 CONT’D
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0 UNIT CONT:E5 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3215
DLA DISTRIBUTION BARSTOW
CENTRAL RECEIVING WHSE 7
REC OFFICER 442-295-4148
BARSTOW CA 92311-5014
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3215
DLA DISTRIBUTION BARSTOW
CENTRAL RECEIVING WHSE 7
REC OFFICER 442-295-4148
BARSTOW CA 92311-5014
US
Need Ship Date:05/22/2027 Original Required Delivery Date:03/28/2028
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-15TA
SECTION B
PR: PRLI: CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0120
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A6-26-T-15TA NSN/Part Number: 0001S00000053 Quantity: 2 EA Purchase Request: 7017837107QTY - See Solicitation Delivery: 425 days ADO