Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTRACTOR FIRST ARTIC

Active
SPE4A6-26-Q-1292Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to a wiring harness identified by NSN/Part Number 0001S00000053, with a quantity of one unit, and requires delivery within 214 days after date of award. The technical data associated with this item is subject to strict export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and access is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A6-26-Q-1292, posted on August 5, 2026, with responses due by August 15, 2026. The contracting activity is under the ASC Commodities Division of the Department of Defense, with primary point of contact Jessica Fuentes-Ossio reachable via email and phone. All performance and data handling must adhere to U.S. federal export control regulations as enforced by the Defense Logistics Agency.

General Info

One wiring harness, NSN 0001S00000053, due in 214 days, subject to strict ITAR/EAR export controls and DOD certification requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A6-26-Q-1292 Wiring Harness

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
JESSICA Fuentes-OSSIO
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRING HARNESS
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000053 Quantity: 1 EA Purchase Request: 7017016949QTY - See Solicitation Delivery: 214 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
INSULATION SHEET, EL
Solicitation # SPE4A6-26-T-12VE
The contract requires the supply of five insulation sheets, item NSN 5970-01-610-9757, with part number L100642.1, delivered within five days of award under solicitation SPE4A6-26-T-12VE. The unit price is $5.00 per each, totaling $25.00, with no variance allowed in quantity. Delivery is FOB origin, and both inspection and acceptance occur at the point of origin. The packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951. If the material is non-hazardous under FED-STD-313, it must be commercially packaged per ASTM D3951 but labeled and marked per MIL-STD-129 with palletization aligned to RP001. Hazardous materials must meet TQ requirement IP025. Sampling inspection follows MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major, and zero non-conformances are required unless otherwise stated. The supplier must remove all government identification from non-accepted items and adhere to the unit of issue and packaging specifications outlined in the contract.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
INTERCONNECTING BOX
Solicitation # SPE7M4-26-T-300V
Eaton Corporation, identified by CAGE code 81118, is required to supply six interconnecting boxes with part number E22ASB204 and NSN 5975-01-562-1270 under contract SPE7M4-26-T-300V, with a unit price of $6.00 per unit and a total contract value of $36.00. Delivery must be completed within 20 days of contract award and is to be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the product must comply with all DLA Master List of Technical and Quality Requirements, which take precedence over any commercial standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous material or ASTM D3951 for non-hazardous items, with palletization conforming to DLA procurement standards. The shipment must not use parcel post and must be sent via traceable means to the government freight address in Virginia Beach, with billing sent to Norfolk. The required delivery date is August 3, 2026, and the contract includes specific government use codes and project identifiers. All technical, quality, and packaging directives referenced by R or I numbers are incorporated by reference from the DLA master list and govern performance and compliance.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335932
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-Q-1283
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-513-6396, requiring two units to be delivered within 253 days of award. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling defense export-controlled technical data, and have been formally approved by the DLA controlling authority. Compliance with DFARS 252.225-7048 is mandatory. The solicitation, identified as SPE4A6-26-Q-1283, was posted on August 5, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s ASC Commodities Division through point of contact Marcita Robinson. The procurement is issued under a federal solicitation with no set-aside classification.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335932
New
Federal
INSULATION SLEEVING
Solicitation # N0010426QED01
The contract pertains to the procurement of insulation sleeving under solicitation N0010426QED01, issued by the Navsup Weapon Systems Support Mech, a Department of Defense entity based in Mechanicsburg, Pennsylvania. All deliverables must comply with stringent technical and quality requirements detailed in the Individual Repair Part Ordering Data (IRPOD), which is mandatory for vendor review and forms the foundational specification for compliance. The contract enforces a clear order of precedence for documents, with amendments to the purchase order taking priority over schedules, terms, IRPOD, and referenced standards. Technical documents including drawings, specifications, and STRs must be used in their entirety at the specified revision levels, and any deviations or waivers—especially concerning critical repair parts—require prior written approval from the Contracting Officer, supported by technical justification and evaluation data demonstrating no adverse impact on form, fit, or function. The contractor must maintain a government-acceptable inspection system and retain all inspection records throughout contract performance and beyond. Packaging requirements are dictated by MIL-PRF-23199 and associated cleanliness control standards, with special provisions for the use of MIL-DTL-24466 green poly bags only when explicitly invoked and properly qualified. Use of mercury or mercury-containing compounds is strictly prohibited. The contract mandates submission of a Certificate of Compliance and a Cure Date Certificate with each delivery, each tailored to the unique combination of contract number, NSN, and item nomenclature, following NAVSUP-WSS-specific DD Form 1423 protocols. Data deliverables, identified by DID DI-MISC-81356 and DI-MISC-81318, must be submitted no later than the end of contract, alongside pricing information valid for 60 days post-closing. The solicitation is a total small business set-aside, requiring compliance with cyber maturity certification, priority ratings for national defense, and security prohibitions as defined in applicable notices. All contractual documents are deemed issued upon electronic transmission, and vendors must register with the BPMI e-commerce site to access restricted technical materials. The point of contact for inquiries is Melissa Furness, with responses due by September 4, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details
NAICS: 335932
New
Federal
Supply of 954 MCM 45/7 ACSR Conductor WireThe contract calls for the manufacture and delivery of 7,000 feet of 954 MCM 45/7 ACSR conductor wire, with a permitted tolerance of plus or minus five percent, to be supplied on metal reels suitable for transmission line installation. The wire must comply with ASTM and federal standards for use in electrical power transmission systems, ensuring performance, durability, and safety under operational conditions. Delivery must meet all technical specifications outlined for material composition, tensile strength, conductivity, and reel packaging to fulfill grid infrastructure requirements. This is a subcontract issued under the Small Business Administration set-aside program, classified under NAICS code 335932 for other electrical equipment and component manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 18, 2026. The awarding agency is the Department of Energy through its Western Upper Great Plains Region, though specific performance location and point of contact details are not provided. All bids must align with the technical and regulatory requirements for federal transmission projects, and the contract will be managed through the FedConnect portal.
Western Upper Great Plains Region

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335932
New
Federal
SUPPLY AND DELIVER CONDUCTOR & LINE HARDWARE
Solicitation # 89503226QWA000745
The U.S. Department of Energy through its Western Upper Great Plains Region is soliciting bids to supply and deliver conductor and line hardware under solicitation number 89503226QWA000745, posted on August 5, 2026, with responses due by August 18, 2026. This federal procurement is set aside for small business administration (SBA) concerns and falls under NAICS code 335932, which pertains to other electrical equipment and component manufacturing. The contract will be managed from the agency’s office located in Billings, Montana, with Samuel Hyslop listed as the contracting officer and primary point of contact via email at hyslop@wapa.gov. The place of performance has not been specified beyond the agency’s location, indicating potential delivery to various sites within the region served by the Western Upper Great Plains Region. All interested vendors must submit proposals through the FedConnect portal before the deadline to be considered for award.
Western Upper Great Plains Region

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335932
New
DIBBS
STUFFING TUBE
Solicitation # SPE4A6-26-T-12QZ
The stuffing tube, identified by NSN 5975-01-619-4937 and quantity of 15 units, is subject to strict export control regulations under either ITAR or EAR, meaning its technical data cannot be disclosed or transferred to foreign persons, regardless of location, without prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign national employees and foreign subsidiaries of U.S. companies, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors that have obtained U.S./Canada Joint Certification Program certification, completed required training on handling defense export-controlled technical data, and passed the DLA Export-Controlled Technical Data Questionnaire, with approval granted by the controlling DLA authority. The procurement is part of solicitation SPE4A6-26-T-12QZ, posted on August 4, 2026, with responses due by August 12, 2026, under NAICS code 335932. Delivery is scheduled for 171 days after contract award, with the place of performance located in New Cumberland, Pennsylvania, and the primary point of contact is Emma Garrett of the ASC Commodities Division within the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-12JM
This contract specifies the procurement of electrical insulation sleeving conforming to SAE AS23053/1 Revision A dated 03/01/2018 with part number M23053/1-101-0, supplied in 4-foot lengths and identified by NSN 5970013194531. The material must meet technical and quality requirements referenced from the DLA Master List, and is designated as a critical application item with a non-extendable shelf life of 12 months. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including special shelf-life marking code 33, and palletization must adhere to DLA packaging requirements. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The item is subject to Qualified Products List requirements, and no government identification may remain on non-accepted supplies. The contract requires delivery of 19 4-foot lengths within five days FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the point of origin. Documentation for source approval must be submitted per RC001, and the unit of issue is LG. Pricing and delivery details are linked to purchase request 7017688291, with the solicitation issued under contract number SPE4A6-26-T-12JM, posted on August 4, 2026, and responses due by August 12, 2026. The item falls under NAICS code 335932 and is managed by the Department of Defense’s ASC Commodities Division, with Angela Boyce as the primary point of contact. All materials must be sourced from qualified manufacturers and comply with all specified procurement standards without deviation.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
CHASSIS, ELECTRICAL-
Solicitation # SPE4A5-26-T-325C
The contract pertains to the procurement of a chassis electrical component, identified by NSN 5975-01-519-1435 and manufacturer part number 8527410-901 from Honeywell International Inc. It specifies a quantity of two units to be delivered FOB origin with a strict 0% variance in quantity, inspected and accepted at destination after a 171-day delivery window, with an original required delivery date of June 16, 2027. The item is not classified as hazardous per HMIC P review, eliminating the need for an SDS package, and must be commercially packaged per ASTM D3951 unless overridden by higher-priority DLA technical requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must follow DLA Packaging Requirements. Unit of issue is each, with no requirement for Item Unique Identification under DFARS 252.211-7003. Sampling procedures must conform to MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise stipulated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The product is designated a critical application item and must adhere to CMMC Level 2 Self-Assessment requirements. Configuration changes require formal Engineering Change Proposal or Variance requests, and government identification must be removed from non-accepted supplies. The contract is a Total Small Business Set-Aside under NAICS code 335932, with procurement governed by DLA’s Master List of Technical and Quality Requirements, which supersede all other standards. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation instructions referenced in DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-U-3303
The contract pertains to the procurement of insulation sleeving with part number 202D121-25/225-0 and NSN 5970015648045, issued under solicitation SPE4A6-26-U-3303 by the Defense Logistics Agency. The required quantity is 802 units, delivered FOB origin within 89 days, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and packaging must comply strictly with DLA requirements, including MIL-STD-129 for marking and labeling, and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA master specifications overriding all other standards. Palletization must adhere to RP001 guidelines, and unit packaging must reflect the specified QUP. The item is classified as a critical application, and manufacturing documentation for source approval must meet RC001 standards. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Attributes not explicitly defined are treated as major. While MIL-STD-105/ASQ Z1.4 may determine sample size, acceptance requires zero nonconformances unless otherwise stipulated. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue or award date depending on acquisition type. The item is covered under DLA Direct CONUS, and all documentation must align with the authorized DoD unit of issue, which is each (EA). The primary point of contact is Heather Spadaro, and the solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335932
New
DIBBS
CONDUIT OUTLET
Solicitation # SPE4A7-26-T-596L
This contract solicits the procurement of conduit outlets identified by NSN 5975-01-555-8269 and part number HBL560R9W from HUBBELL INC WIRING DEVICE DIV, with a total quantity of 109 units divided between two line items: 8 units and 101 units. Delivery is required within 40 days of order receipt, with a scheduled need ship and original delivery date of September 14, 2026, under FOB Origin terms. Inspection and acceptance occur at the destination location, governed by FAR 52.246-2, and the government mandates that all items be inspected and accepted upon arrival. The contract prohibits the use of additive manufacturing for any component, and failure to comply renders an offer ineligible for award. All packaging must adhere to DLA Master List of Technical and Quality Requirements, which override ASTM D3951; non-hazardous items must be commercially packaged under ASTM D3951 while hazardous items, as defined by FED-STD-313, must comply with TQ requirement IP025. All packaging and labeling must follow MIL-STD-129, including appropriate hazardous material markings under 29 CFR 1910.1200, and palletization must conform to RP001. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. Zero non-conformances are required in sample lots even if MIL-STD-105/ASQ Z1.4 is used for lot sizing. Contractors must submit a Safety Data Sheet for any hazardous materials prior to award, and failure to do so results in nonresponsibility and ineligibility. Offerors must validate their SAM representations regarding business size, socioeconomic status, and compliance with regulations including DFARS 252.203-7005, 252.204-7008, 252.204-7012, and 252.204-7016, and must comply with the Buy American Act and Berry Amendment, with
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 335932
New
DIBBS
INSULATOR, STANDOFF
Solicitation # SPE4A6-26-T-12CJ
The contract is for the procurement of two INSULATOR, STANDOFF units with NSN/Part Number 5970-01-538-4345 under solicitation SPE4A6-26-T-12CJ, issued by the Defense Logistics Agency’s ASC Commodities Division. The requirement is a total small business set-aside under NAICS code 335932, with responses due by August 12, 2026, and delivery expected within 171 days after order. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i), though the item is subject to strict export control under ITAR or EAR due to associated technical data, which prohibits any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors certified under the US/Canada Joint Certification Program, who have completed DLA’s export control training and questionnaire, may access controlled technical data. The contract incorporates multiple technical and quality requirements referenced by R and I numbers from the DLA Master List, including ISO 9001:2015 for quality management, CMMC Level 2 cybersecurity certification for the offering organization, and DLA packaging standards. Government identification must be removed from non-accepted supplies, and all data and materials are subject to the rules governing covered defense information. The place of performance is specified as New Cumberland, PA, with Berkeley Vaughan as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 484220
New
DIBBS
Small Business Subcontracting Participation (DBE/MBE/WBE)The contract opportunity enables small businesses owned by disadvantaged, minority, women, or veteran entrepreneurs to engage in subcontracting roles within the supply chain, specifically in areas such as logistics, packaging, and component supply. Targeted at businesses classified as DBE, MBE, or WBE, this initiative supports broader federal goals of increasing inclusion and economic growth among underrepresented business owners. The solicitation is tied to the NAICS code 484220, which corresponds to general freight trucking, indicating that transportation and distribution services are central to the scope of work. Performance will be centered at Hill Air Force Base with the zip code 84056-5734, and the contracting activity falls under the ASC Commodities Division within the Department of Defense. Interested parties must submit their responses by the deadline of August 13, 2026, with the opportunity posted on August 5, 2026. This is a subcontracting opportunity, not a prime contract, meaning businesses will be providing goods or services to a prime contractor fulfilling the larger DoD obligation. There is no formal set-aside designation specified, but the focus on minority-, women-, and veteran-owned enterprises signals a strong preference for participation from these groups. The contract is accessible via the DIBBS portal, and while no point of contact is listed, bidders are expected to review the full solicitation details on the provided link for submission instructions and technical requirements.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331492
New
DIBBS
Raw Material Supply for Metal FabricationThe contract involves the supply of certified raw metal stock including brass, bronze, and steel that must meet DLA technical specifications for use in the manufacture of sleeve bushings. Materials must be fully compliant with required standards to ensure suitability for defense-related fabrication purposes. The solicitation is issued as a subcontract under NAICS code 331492 by the ASC Commodities Division of the Department of Defense, with performance expected at Hill Air Force Base, UT, zip code 84056-5734. The opportunity was posted on August 5, 2026, with responses due by August 13, 2026, and is accessible through the DIBBS platform. No set-aside provisions are specified, and the contract is open to qualified suppliers capable of delivering certified metals in accordance with stringent military-grade requirements.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details