FIXTURE, AIRCRAFT MA

The contract pertains to the manufacture and delivery of a fixture for aircraft maintenance, identified by NSN 4920016544140, with a quantity of nine units, and includes a separate line item for one unit dedicated to the First Article Test requirement under NSN 0001S00000053. Performance is required at New Cumberland, Pennsylvania, with delivery due in 385 days after award, and FOB origin terms apply despite the solicitation referencing FOB destination; offerors are encouraged to propose expedited delivery schedules, which may receive evaluation preference. All work must conform to 20 specific technical drawings, mostly Revision B dated October 6, 2015, with two higher revisions—C for drawings 81996 1006817 and 81996 1006845—effective as of 2017 and 2016 respectively. Quality and technical compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and adherence to MIL-STD-129 for marking and shipment is mandatory. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at origin, with sampling conducted under MIL-STD-1916 or ASQ H1331 Table 1 using attribute verification levels of AQL 0.1 for critical, AQL 1.0 for major, and AQL 4.0 for minor characteristics. Packaging must follow RP001 DLA Packaging Requirements for Procurement and include mandatory QUP:001 data. Hazardous materials must be labeled per 29 CFR 1910.1200, and radioactive materials exceeding specified activity thresholds require additional labeling per MIL-STD-129. The contractor is subject to comprehensive cybersecurity requirements including CMMC Level 2 self-assessment, safeguarding covered defense information per FAR 252.204-7012, and prohibitions on acquiring covered defense telecommunications equipment per FAR 252.204-7018. The solicitation is a small business set-aside under NAICS 334419, with mandatory SAM registration and representation of small business status, and requires