Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTROL, ALARM

Active
SPE4A6-26-T-12STFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, under solicitation SPE4A6-26-T-12ST, governs the procurement of four units of a critical alarm component identified by NSN 6350-01-507-8243 and part number AL8-2, supplied by Tyco Fire Products LP, Northrop Grumman Systems Corporation, and Deif A/S. The item is classified as a critical application item with strict compliance requirements for physical identification and bare item marking per RQ017, and all packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking applied. Deliveries are to be made FOB origin within 170 days to the designated receipt location in Tracy, California, with zero tolerance for quantity variance. Inspection and acceptance occur at destination, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation issue date for simplified acquisitions or RFP issue date for larger ones, unless amended. Configuration changes require an Engineering Change Proposal and formal variance request, while source approval necessitates full documentation per RC001. The contract enforces strict adherence to DLA packaging standards RP001 and palletization guidelines, with transportation instructions referenced in DLAD Proc Notes C19 and C20. Payment terms are based on a fixed unit price of $4.00 per unit, totaling $16.00, with a required ship date of January 31, 2027, and original delivery deadline of April 20, 2027. The contracting activity is the ASC Commodities Division, Department of Defense, with Roberto Roldan as the primary point of contact for all inquiries.

General Info

Four critical alarm units, NSN 6350-01-507-8243, at $4.00 each, DLA packaging, FOB origin, zero defect, delivery by April 20, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-12ST for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ROBERTO ROLDAN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTROL,ALARM
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
TYCO FIRE PRODUCTS LP 03670 P/N 472057 COMPONENT U1
NORTHROP GRUMMAN SYSTEMS CORPORATION 03956 P/N AL8-2
DEIF A/S DBA R0026 P/N AL8-2
SPE4A6-26-T-12ST
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741311 0001 EA 4.000
NSN/MATERIAL:6350015078243
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE4A6-26-T-12ST
SECTION B
PR: 7017741311 PRLI: 0001 CONT’D
Need Ship Date:01/31/2027 Original Required Delivery Date:04/20/2027
SPE4A6-26-T-12ST NSN/Part Number: 6350-01-507-8243 Quantity: 4 EA Purchase Request: 7017741311QTY: 4 Delivery: 170 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-331G
This contract pertains to the procurement of a dial indicating pressure gage, identified by NSN 6685009894670 and part number DG4MC60PWCANA, with a quantity of 13 units to be delivered FOB origin within 229 days. The item must comply with stringent technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality provisions, inspection and acceptance at origin, and specific packaging standards in accordance with MIL-STD-2073-1E and DLA packaging guidelines. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, and attributes are assigned verification levels or AQLs as specified. The supplier is required to conduct first article testing at certified facilities and submit final reports to the Naval Surface Warfare Center in Philadelphia for approval. The pressure gage must be physically marked per MIL-STD-129 with special marking code 05 indicating it is a delicate instrument and palletized according to DLA requirements. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact surfaces, except for specific functional uses such as in batteries, fluorescent lights, instrumentation, weapon systems, or chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. The unit of issue is each, with no variance permitted in quantity, and acceptance occurs at origin. The contract references multiple technical documentation standards including MIL-G-18997E and DI-DRPR-80651, and compliance with all applicable DLA requirements is mandatory. The solicitation is issued under contract number SPE4A5-26-T-331G, with a response deadline in August 2026, and the point of contact is Marcus Williams of the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
MANUAL STATION
Solicitation # SPE8E8-26-T-5060
This contract, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-5060, specifies the procurement of 18 units of a MANUAL STATION identified by NSN 6350016023428 and part number 0403-1-436-001 REV G, with a unit price of $18.00 and a total contract value of $324.00. Delivery is required FOB origin within 167 days from the award date, with no variance permitted in quantity, and inspections and acceptance are to occur at the destination warehouse in Tracy, California. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is classified as hazardous under FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, but subject to the higher precedence of DLA requirements. Palletization must follow RP001 guidelines, and the unit of issue is each (EA). The shipping and delivery address is the DLA Distribution San Joaquin warehouse, and the required ship date is February 1, 2027, with the original delivery deadline of October 27, 2026. Transportation and freight instructions are governed by DLAD Proc Notes C19 and C20. The contract incorporates technical and quality standards referenced by R and I numbers from the DLA Master List, which are accessible online and whose revision status is controlled by the solicitation issue date or amendment, depending on acquisition size. The item is associated with multiple part numbers from different suppliers, including Gibbs & Cox Inc. and CERBERUS PYROTRONICS Inc., indicating potential component sourcing. The contract falls under NAICS code 334512 and is a federal acquisition with no set-aside designation. The point of contact is Alexis Selby at DLA San Joaquin, and responses were due by August 17, 2026, with the solicitation posted on August 5, 2026. All documentation must align with DLA’s authorized unit of issue standards, as defined in their official Excel reference, and the government’s right to remove identification
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334512
New
DIBBS
Thermostatic Switch Manufacturing and SupplyThe contract calls for the manufacture and supply of a single thermostatic switch identified by NSN 5930014554588 and part number ISUZU MOTOR CO. LTD J1165 P/N 582450-0130, encompassing all phases from production through final delivery. This includes rigorous testing, proper packaging, accurate labeling, and timely shipment to meet strict military standards. The work is to be performed under a subcontract for the Department of Defense, with the place of performance designated as Boone, Iowa, ZIP 50036-5411. The solicitation is categorized under NAICS code 334512, indicating the nature of the work falls within the electronic component manufacturing sector. The opportunity was posted on August 4, 2026, with responses due by August 17, 2026, and is managed by the Maritime Supply Chain ESOC Buys division of the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-329T
The contract specifies the procurement of a dial indicating pressure gauge identified by NSN 6685012957435 and part number SG4MC10KPWRONAG, with a requirement for 20 units delivered FOB origin within 291 days. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The item is designated as a critical application with specific identification and marking requirements per MIL-STD-129 and the special marking code 05 for delicate instrument. Packaging must conform to MIL-STD-2073-1E with defined packaging methods, materials, and unit container codes, and palletization must adhere to DLA packaging rules. Mercury and mercury-containing compounds are strictly prohibited unless functional use is explicitly exempted and meets safety standards outlined in NAVSEA 5100-003D, requiring secondary containment for portable devices. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request. Measuring and test equipment used must meet RT001 standards, and the contract references the QAP-106 and MIL-G-18997E technical documentation. The purchase request number is 7017742652, the solicitation number is SPE4A5-26-T-329T, and point of contact is Aprile Corley of the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-323K
The contract is for the procurement of four pressure dial gauges identified by NSN 6685-01-205-3830 and part number 19HCXXX0X15E1BXAXX05 under solicitation SPE4A5-26-T-323K, a total small business set-aside with NAICS code 334512. Delivery is required within 171 days of award to the destination warehouse in Tracy, California, with FOB origin terms and no quantity variance allowed. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for delicate instruments. The contract incorporates DLA’s master technical and quality requirements, which govern sampling procedures using MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs of VII, IV, II or 0.1, 1.0, 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited in the product or its packaging unless specifically exempted for functional components like batteries or instruments, and portable mercury-containing devices must have double containment as per NAVSEA 5100-003D. Preservation, packaging, and marking must also exclude mercury entirely. The unit of issue is each, priced at $4.00 per unit, totaling $16.00. The solicitation closes on August 12, 2026, with award anticipated shortly after, and primary contact is Aliza Wyche of the DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-310D
The contract solicits one unit of a GAGE, PRESSURE, DIAL with NSN 6685-01-030-0260 under solicitation SPE4A5-26-T-310D, issued by the Defense Logistics Agency’s Aviation division. The requirement is for an automated simplified acquisition with a response deadline of August 7, 2026, and delivery is required within five days after delivery order issuance, with the item destined for Turkey under a Foreign Military Sales (FMS) program using regular FOB Origin terms. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with sampling methods mandated to follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, and critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The item must be manufactured in compliance with SAE AS9003 or ISO 9001 tailored to SAE AS9003 standards, with origin inspection required under FAR 52.246-2 and acceptance also occurring at origin. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, including the special marking code 05-05 for delicate instruments, and palletization must adhere to DLA Packaging Requirements (RP001); hazardous material packaging must comply with 29 CFR 1910.1200. Export-controlled technical data is applicable, governed by DFARS 252.225-7048, restricting access to contractors with approved JCP certification, completed training, and DLA authorization. The solicitation incorporates the DLA Master Solicitation Revision 105 (May 20, 2026) and applies numerous FAR and DFARS clauses including cybersecurity safeguards under DFARS 252.204-7012, NIST SP 800-171 assessment requirements with deviation 2026-O0025, restrictions on covered defense telecommunications equipment under DFARS 252.204-7018, and prohibitions on hexavalent chromium and toxic materials.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSURE
Solicitation # SPE4A5-26-T-323N
The contract is for the procurement of pressure transmitters under solicitation SPE4A5-26-T-323N, with a Women-Owned Small Business Set-Aside designation, and is governed by DLA packaging and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 6685014917943 and part numbers from approved manufacturers including DRUCK, KULITE, G P 50 NEW YORK, and HYDAC, must comply with strict sampling standards such as MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Verification levels and AQLs are mandated for critical, major, and minor attributes, and manufacturers may choose between attribute or variable inspection methods. Physical identification and marking must adhere to MIL-STD-129 with no special marking codes applied, and packaging must follow MIL-STD-2073-1E with U-pack code, including specific packaging methods and materials for preservation and cushioning. The contract calls for delivery of 90 units, each priced at $90.00, totaling $8,100.00, with a delivery timeline of 171 days after award, FOB origin, and inspection and acceptance to occur at destination. The quantity variance is strictly zero percent, meaning no over or under shipments are permitted. Palletization must meet DLA packaging requirements, and all units are to be delivered to New Cumberland, Pennsylvania, 17070-5002. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division. Contract inquiries and communications are to be directed to Jamie Bonda at the provided contact information, and the NAICS code 334512 applies to the sensor manufacturing classification. The unit of issue is each (EA), consistent with DoD standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M8-26-T-5516
The contract pertains to the procurement of ten thermostatic switches with NSN 5930-00-061-2357 under solicitation SPE7M8-26-T-5516, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 168 days after the date of order to DLA Distribution at New Cumberland, Pennsylvania, with FOB Destination terms placing responsibility for transportation and risk on the contractor until receipt at the delivery point. The solicitation, posted on August 4, 2026, with a response deadline of August 7, 2026, falls under NAICS code 334512 for other electronic component manufacturing and is subject to simplified acquisition procedures. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, incorporating referenced standards such as MIL-STD-129 for labeling, ASTM D3951 for commercial packaging, and RP001 for packaging and palletization. The item must adhere to strict mercury restrictions, prohibiting intentional introduction of mercury or mercury compounds except in sanctioned components like sensors or fluorescent lamps that include secondary containment per NAVSEA 5100-003D. All packaging and labeling must align with federal guidelines including Hazard Communication Standard (29 CFR 1910.1200) and prohibit hexavalent chromium, with no tolerance for non-conformances during inspection, which occurs at the destination using zero non-conformance sampling per MIL-STD-1916. Payment must be processed through WAWF with electronic invoicing, and the contractor is required to maintain active SAM registration with valid UEI and CAGE codes. All submissions must be made via the DLA Internet Bid Board System, and the contractor must comply with extensive cybersecurity and data protection clauses including 252.204-7012 for safeguarding covered defense information. Further, the contract incorporates provisions addressing trafficking in persons, employment eligibility, equal opportunity, export controls, and restrictions on procurement from communist Chinese military companies, while prohibiting unauthorized storage or disposal of hazardous materials. No specific pricing is listed, and the contract type is not confirmed, though the nature of the acquisition suggests a firm-fixed-price structure. The absence of detailed evaluation factors or a formal Section J indicates reliance on the DLA Master Solicitation for procedural guidance.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSURE
Solicitation # SPE4A5-26-T-325Y
The contract pertains to the procurement of two pressure transmitters, part number BT5-T4-44G-P, with NSN 6685-01-728-2144, classified as a critical application item. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s facility. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special markings required. Packaging must follow RP001 guidelines and be palletized accordingly. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date based on acquisition type. Measuring equipment must meet RT001 standards, and source approval documentation must comply with RC001. The contract specifies delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation directives governed by DLAD Proc Notes C19 and C20. The required ship date is January 31, 2027, with the original delivery deadline set for April 9, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CASE
Solicitation # SPE4A5-26-T-321V
This contract, issued under solicitation SPE4A5-26-T-321V by the Department of Defense’s DLA, specifies the procurement of one unit of NSN 6685010500031, part number 0414-2153, manufactured by Rogerson Kratos with CAGE code 34830. The item is classified as a Critical Application Item and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any industry standards such as ASTM D3951. Packaging must adhere strictly to RP001 DLA Packaging Requirements, MIL-STD-129 for labeling, and FED-STD-313 for hazardous material handling, with non-hazardous items requiring commercial packaging compliant with ASTM D3951 only if not overridden by DLA standards. The item must be delivered FOB origin within 171 days, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless explicitly stated otherwise, where critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0. All packaging and palletization must meet RP001 guidelines, and the unit of issue is EA as defined by DLA’s authorized standards. Delivery is to DLA Distribution Depot Hill at Hill AFB, Utah, with a required ship date of January 31, 2027, after the original delivery deadline of December 8, 2026. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the solicitation was posted on August 4, 2026, with a response deadline of August 12, 2026. Primary point of contact is Aliza Wyche.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A6-26-T-11YW
The contract is for the procurement of 283 units of a dial indicating pressure gauge with NSN 6685-01-432-4038 and part number 750SS4004LA15, under solicitation SPE4A6-26-T-11YW, a total small business set-aside under NAICS code 334512. Delivery is required within 92 days from the award date, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance both occur at the destination. The item is classified as a critical application and must be marked in accordance with MIL-STD-129 with a special marking code of 05 indicating it is a delicate instrument. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including use of unit container D3, intermediate container E5, and pack code U. All physical identification and marking requirements are governed by RQ017. Sampling and quality inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, and documentation for source approval must adhere to RC001. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is February 23, 2027, with a needed ship date of May 13, 2026. The contract is managed by the ASC Commodities Division under the Department of Defense, with Shameka Edwards as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PROBE, HUMIDITY-TEMP
Solicitation # SPE4A5-26-T-326H
This contract is for the procurement of 25 humidity-temperature probes, part number HMP110I10E0CJB1 from Vaisala Inc, identified by NSN 6685-01-721-1250, classified as a critical application item. Delivery is required within 48 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special markings and palletization in accordance with DLA packaging guidelines. The product is subject to strict quality and technical requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling protocols governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stated. Any attributes not explicitly defined are treated as major. The probe must be free of intentional mercury or mercury compounds, except in approved exceptions such as functional batteries, fluorescent lights, sensors, or reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. All measuring and test equipment used during production must be properly calibrated and documented, and source approval must include complete documentation. The contract is a total small business set-aside under NAICS 334512, with a response deadline of August 12, 2026, and the required delivery date is January 18, 2027. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation details follow DLA procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334332
New
DIBBS
Military-Grade Cable Assembly Manufacturing and Supply

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details