Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

CONTROL, ALARM

Active
SPRTA1-24-R-0127Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation SPRTA1-24-R-0127 seeks spares for the CONTROL, ALARM system with NSN 6340-01-708-4202 and part number 8-490-12, specifically for use on the B-2 aircraft. The item is a metal-cased electronic unit measuring 36.50 inches in length, 26.50 inches in width, and 9.50 inches in height, weighing 90.30 ounces, and is required in a quantity of eight units to be delivered to location SW3211 no later than December 8, 2026. The acquisition is not set aside and is being conducted under sole-source authority due to the limited number of responsible sources, with Northrop Grumman designated as the primary contractor and Eldec Aerospace Corporation as the subcontractor. The Government does not own manufacturing data rights, and potential offerors are directed to contact the OEM for access to technical data. UID labeling is mandatory, and export control restrictions do not apply. Electronic submission through SAM.gov is required, with no hardcopies provided. The contract award is contingent upon the availability of appropriated funds, and no liability is incurred until funding is confirmed in writing. Price and past performance are key evaluation factors, with no reliance on commercial item acquisition policies under Part 12. Foreign firms must consult with the contracting officer prior to submitting proposals due to potential participation restrictions. A designated Ombudsman is available to address contractor concerns during proposal development, though they do not influence evaluation or award decisions. Questions regarding the solicitation should be directed to Michael Hannan at micahel.hannan.1@us.af.mil, with all responses due by May 29, 2024, despite the later posted date listed in the data, which appears to be an error.

General Info

Eight B-2 aircraft alarm system spares, sole-source to Northrop Grumman, due Dec 8, 2026, UID labeled, SAM.gov submission required.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(2)

SPRTA1-24-R-0127-0001.pdf

PDF

SPRTA1-24-R-0127.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Amendment 1

Contract was updated

Type Changed

Solicitation → Presolicitation

Type Changed

Presolicitation → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City
Contacts1 person available
OfficeTINKER AFB, OK, 73145-3070, USA
Organization / Agency
Department Of Defense → Ok DLA Aviation At Oklahoma City
View Agency Profile
Office AddressTINKER AFB, OK, 73145-3070, USA

Full Description

Show more

The purpose of this amendment is to authorize a change in the proposing Prime Contractor, establish a new solicitation closing date, and revise the solicitation’s clauses and provisions in accordance with recent regulatory changes and DoD Class Deviations.




Synopsis


PR: FD2030-24-01101



1.  Estimated issue date and estimated closing/response date: 


Issue:     April 29, 2024


Closes: May 29, 2024



2.  RFP#: SPRTA1-24-R-0127



3.  Service/Spare/Repair/OH: Spares



4.  AMC: 3/D



5.  Nomenclature/Noun: CONTROL, ALARM



6.  NSN: 6340-01-708-4202



7.  PN: 8-490-12



8.  History: No Previous History



9.  Description/Function: Provides status of landing gear. Material: Metal case housing electronic components. End item is the B-2 aircraft. Length 36.50”, Width 26.50”, Height 9.50”, Weight 90.30 ounces.



10.  Total Line-Item Quantity: L/I 0001 -8 Each (Range: 2-12)


                                                         


11.   Application (Engine or Aircraft): B-2



12.   Destination: L/I 0001 Ship to SW3211


                            


13.   Required Delivery: L/I 0001 Ship to SW3211 on or before 8 December 2026



14.   Qualification Requirements: Do not exist.



15.   Export Control Requirements: No



16.  UID: UID is required.



17.  Qualified Sources: Primary Contractor: Northrop Grumman (CAGE 78JW8); Subcontractor: Eldec Aerospace Corporation (CAGE 08748)



18.  Set-aside:  This acquisition will not be set aside.



19. Mandatory Language:



The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM to inquire about the data or rights to the data.



In accordance with FAR 5.207(c) (16) (i), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.



Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award.



It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contract with the firms(s) listed. 



This acquisition involves technology that has a military or space application.  The extent of foreign participation has not yet been determined.  Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation, regarding eligible sources (e.g., if this is a small business set aside, foreign sources may not participate as potential prime contractors but could, if otherwise eligible, participate as subcontractors).



Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within15 days of this notice.



Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made.  No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer



Electronic procedures will be used for this solicitation.  Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.sam.gov.



Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements.  The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. 



This notice of intent is not a request for competition.  However, all proposals received within 45 days (30 days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government.  A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government.  Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.



Note:  While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation.



Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 855-3556. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.


Request for written quotation will be issued.  Only written or faxed request received directly from the requestors are acceptable. The anticipated award date will be 90 days after the issuance of this notice.



20.   Buyer name and email address: Questions concerning this synopsis or subsequent solicitation can be directed to the buyer Michael Hannan, micahel.hannan.1@us.af.mil.

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AIThe contract pertains to the procurement of two structural aircraft panels identified by NSN 1560-01-196-4395, with a delivery schedule of 292 days after contract award. The solicitation, issued under number SPE4A7-26-Q-0874, requires strict compliance with multiple Department of Defense and Defense Logistics Agency requirements including Cybersecurity Maturity Model Certification Level 2 for third-party assessors, adherence to DLA packaging standards, and the handling of Covered Defense Information. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Inspection and acceptance are to occur at the origin, and any non-accepted items must have all government identification removed. Physical marking of the bare item is required, though Item Unique Identification is explicitly waived per the service customer’s direction. Technical data associated with this item is subject to export control under ITAR or EAR, restricting unauthorized disclosures to foreign persons or entities; access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The contract is administered by the Department of Defense’s ASC Supplier Operations AE and AF Division, with Brian Kurtz as the primary point of contact, and responses are due by August 7, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
Skin, Cabin LWR RH AThe United States Coast Guard’s Aviation Logistics Center intends to award a sole source Basic Ordering Agreement call to Sikorsky Aircraft Corporation, the Original Equipment Manufacturer, for four units of the Skin, Cabin LWR RH A, identified by NSN 1560-01-HS3-5329 and part number 70203-82300-129, under the Basic Ordering Agreement SPE4A1-22-G-0005. This procurement is conducted under FAR 12.102(a) and FAR Part 12 as a commercial item acquisition, with the North American Industry Classification System code 336413 and a size standard of 1,250 employees; the small business set-aside has been dissolved, making the requirement unrestricted. The item is critical to the MH-60T helicopter fleet and requires unique production techniques and extensive testing, justifying sole source procurement due to its proprietary design and limited availability from a single supplier. Delivery is required within 200 days after receipt of order, with a required delivery date of April 30, 2027, and early shipments are encouraged at no additional cost to the government. F.O.B. point is origin, and inspections and acceptance will be conducted at the manufacturer’s facility by the Defense Contract Management Agency. The solicitation number is 70Z03826QJ0000172, and while no formal solicitation package will be issued, responsible sources may submit quotations via email to Riley.A.Ayers@uscg.mil and mrr-procurement@uscg.mil with the solicitation number in the subject line until August 17, 2026, at 2:00 PM EDT, the final extended response deadline. Award will be based solely on a determination of fair and reasonable pricing, evaluated through market research, historical pricing, current price lists, industry comparisons, and the Independent Government Cost Estimate. The contracting office is located in Elizabeth City, North Carolina, and the Government will not enforce certain FAR representations and certifications related to affirmative action, socioeconomic status, or simplified acquisition terms, as they are not applicable under this commercial items acquisition.
Aviation Logistics Center (ALC)(00038)

POSTED

about 10 hours ago

DEADLINE

in 24 days
View Details
NAICS: 336413
New
Federal
48 LRS - Modular Approach Shoring KitThe contract solicitation FA558726Q0032 under the Department of Defense's 48th Logistics Readiness Squadron seeks two modular approach shoring kits for RAF Lakenheath, UK, to support aircraft and vehicle loading operations on C-130, C-17, and C-5 aircraft, LCACs, and JHSVs. Each kit must meet stringent technical specifications including modular ramp and wedge components capable of adjustable lengths from 130 to 788 inches and heights from 0 to 55 inches, with each ramp supporting up to 26,000 lbs per axle and featuring high-traction rungs and tethered pins to prevent foreign object damage. The kits are to be delivered within 90 days of contract award, shipped FOB destination, and crated on two skids approximately 98 x 48 x 70 inches, each weighing about 2,652 lbs, in full compliance with ATTLA #2012.02.06.02 Rev 1 and DoDM 4140.65 wood packaging standards. Packaging and marking require clear labeling as “UNITED STATES AIR FORCE,” completion of DD Form 1139 for military air shipment eligibility, and adherence to UK and U.S. cargo handling norms, although no barcoding or additional labeling standards are mandated. Delivery is to Building 1035 at RAF Lakenheath, with all shipping and transit costs included in the vendor’s quoted price. The solicitation does not include formal FAR or DFARS clauses, nor does it reference specific MIL-STDs, instead relying on customized requirements from the Statement of Work covering packaging, safety, access, and logistics. Vendor proposals must meet mandatory compliance criteria on technical specs, FOD prevention, and shipping protocols, with evaluation likely following a Lowest Price Technically Acceptable approach, though the methodology is not explicitly stated. No pricing data, contract value, or cost breakdowns are provided, making award dependent on submitted quotes. Security requirements mandate contractor personnel obtain DoD installation access passes within 30 days of award, with full adherence to operational security policies and 24-hour reporting of mishaps. Access to the site requires prior coordination with the assigned government points of contact, and all subcontractors must be managed under the prime contractor’s responsibility. Proposal submissions are due electronically by July 29, 2026, with
FA5587 48 Cons (admin Only No Req)

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
16--REEL,SHOULDER HARNEThis solicitation, identified as N0038326QFA99, is a total small business set-aside for the procurement of a reel shoulder harness under NAICS code 336413, issued by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania. The requirement is subject to mandatory source approval, meaning all offerors must submit complete documentation as outlined in the NAVSUP WSS Source Approval Brochure to be eligible for award; failure to do so will disqualify the proposal. The Government has determined that no other source can currently meet its needs due to insufficient or inadmissible data, and award may proceed based on fleet support requirements if source approval cannot be finalized in time. The solicitation mandates compliance with numerous federal regulations including Buy American provisions, limitations on pass-through charges, security exclusions, and the mandatory use of Workflow Pro’s Assist Module, alongside specific payment and identification instructions. The contract is awarded based on best value, evaluating price, capacity/delivery capability, and past performance. Offers must be submitted electronically via email to kate.n.schalck.civ@us.navy.mil no later than August 24, 2026, at 8:30 p.m. Eastern Time. The Government accepts proposals via email as binding agreements upon acceptance, and all awardees must comply with the requirements for item unique identification, valuation, and royalty information as specified. The point of contact for inquiries is Kate N. Schalck, with a direct phone number provided, and all correspondence must reference the solicitation number and adhere strictly to the detailed compliance obligations outlined.
Navsup Weapon Systems Support

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--VALVE,ECS, IN REPAIR/MODIFICATION OFThis solicitation is a sole-source procurement by the Navy’s NAVSUP Weapon Systems Support for the repair and modification of an ECS Valve, identified by part number 7RH 1660 016686579 P8 and drawing number 79318-423775-1. The work must be performed at Meggitt’s facility in North Hollywood, CA, and all repairs must conform to the latest approved revisions of technical manuals, drawings, and specifications. Items must be restored to a Ready for Issue (RFI) condition through overhaul or repair processes that include disassembly, inspection, component replacement, reassembly, and rigorous testing. The contractor is solely responsible for providing all tools, fixtures, test equipment, and materials unless explicitly designated as Government Furnished Property. All repairs require strict adherence to configuration control, prohibiting unauthorized changes to processes, sources, or facilities without prior written approval from the Procuring Contracting Officer. Any deviations, including beyond economical repair (BER), missing on induction (MOI), or over and above (OAR) repairs, require formal documentation and DCMA concurrence before proceeding. The contractor must maintain a certified quality management system compliant with ISO 9001/SAE AS9100 and a calibration program meeting ANSI/NCSL Z540.3 or equivalent standards. All purchased parts must be new, as defined by FAR 52.211-5, and subject to receiving inspection with detailed documentation of dimensional, material, and process data. Cannibalization of parts is strictly prohibited unless explicitly authorized by NAVSUP WSS and the BDE. Items must be marked per MIL-STD-130, stored in controlled environments, and packaged according to MIL-STD-2073. The Government retains full authority over the final disposition of rejected, BER, or OAR items, and the contractor assumes all risk and cost for any work performed using unapproved methods or sources. The contract mandates a one-year warranty from the delivery date, with defects must be reported within 45 days of discovery. Proposals must be submitted by August 6, 2026, and remain valid for 120 days, with all communication routed through Danielle Junod at the designated Navy email address.
Navsup Weapon Systems Support

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
Federal
ASSEMBLY FLANGEThis solicitation, numbered 70Z03826QB0000175, seeks quotations for an ASSEMBLY FLANGE under a combined synopsis and request for quotation format compliant with FAR subpart 12.6 and the Revolutionary FAR Overhaul effective November 28, 2025. The requirement is unrestricted and open to all responsible sources, with a North American Industry Classification System code of 336413 and a small business size standard of 1,250 employees. All supplied parts must be traceable to the original equipment manufacturer, Safran Electrical & Power Chatou SAS, with a CAGE code of F0296, and must include a Certificate of Conformance and documentation proving a complete, auditable chain of custody from the OEM. The Government will only accept parts that meet FAA airworthiness standards and comply with Federal Aviation Regulation Part 21, explicitly prohibiting the use of drawings, specifications, or schematics provided by the agency. Alternate part numbers are permitted if they meet all certification and traceability requirements. A firm-fixed price purchase order will be awarded competitively, with a closing deadline for submissions set for July 30, 2026, at 9:00 a.m. EDT. All quotes must be submitted via email to Raymond.V.Marler@uscg.mil with the solicitation number in the subject line; phone quotes are not accepted. The contract includes a tailored option under clause 52.217-6, allowing the Government to unilaterally increase the quantity of Line Item 1 by up to two additional units, for a maximum total of four, at the original unit price, provided the option is exercised in writing within one calendar year after award. Deliveries of option quantities must follow the same pace as the base order unless otherwise agreed. The place of performance and contracting office are located at the Aviation Logistics Center in Elizabeth City, North Carolina, under the Department of Homeland Security.
Aviation Logistics Center (ALC)(00038)

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
Federal
Purchase Mask Oxygen-Full Face for U.S. Coast Guard Aircraft HC-144The U.S. Coast Guard, through the Aviation Logistics Center in Elizabeth City, North Carolina, is soliciting quotations for 19 Mask Oxygen-Full Face units under solicitation number 70Z03826QL0000175, with a closing date of July 31, 2026, at 4:00 p.m. Eastern Time. This is an unrestricted, firm-fixed price procurement issued as a Request for Quotation under FAR Subpart 12.201 as updated by the Revolutionary FAR Overhaul effective November 28, 2025. The item, identified by National Stock Number 1660-01-HS1-9329 and part number MF20-514, must be manufactured by Safran Aerosystems Ex Safran Aerotechnics RLM with CAGE code F0422, and all suppliers must provide documented traceability to the original equipment manufacturer through an authorized distributor. Each quotation must include a Certificate of Conformance formatted per FAR clause 52.246-15, and no technical drawings or specifications are available from the agency. Quotations must be submitted via email to Allison.T.Meads@uscg.mil with the solicitation number in the subject line, and only F.O.B. Destination or F.O.B. Origin shipping terms will be accepted—Ex Works and all Incoterms 2020 variants, including DAP and FCA, are ineligible. The NAICS code for this requirement is 336413 with a small business size standard of 1,250 employees, and all responsible sources are eligible to respond. The contract will be awarded on a competitive basis, and failure to meet traceability, certification, or shipping requirements will result in disqualification. Additional terms and conditions are detailed in the solicitation attachments, and offerors are responsible for ensuring full compliance with all requirements.
Aviation Logistics Center (ALC)(00038)

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FUEL LINE, AIRCRAFTThis contract is for the procurement of a fuel line for aircraft with NSN 1680017336214, issued under solicitation SPE4A7-26-T-594A by the Defense Logistics Agency. The requirement is for a single unit to be delivered within 20 days to McConnell Air Force Base in Kansas, with delivery terms FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application and must comply with stringent quality standards including SAE AS9100 and DLA Directive Procurement Notes C03 for supply chain traceability documentation. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA’s packaging requirements. The contractor must ensure traceability throughout the supply chain and retain all relevant documentation as mandated by DLA. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes must be verified at specified levels. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on procurement type and milestone dates. The item has no shelf life, and airworthiness approval is required per FAA standards, though unique identification is not mandated. The contract includes two separate CLINs with identical NSN but different procurement requests and required delivery dates—May 21, 2026, and June 2, 2026—with shipping instructions explicitly prohibiting parcel post and requiring traceable means. Freight and parcel post addresses are identical, and the contractor must comply with all DLA packaging, preservation, and reporting provisions. The point of contact for the solicitation is Soni Randolph of the Department of Defense, and the NAICS code indicates the item falls under aircraft engine and engine parts manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 336413
New
Federal
Door AircraftThe solicitation SPRTA1-26-R-0218, titled "Door Aircraft," is issued by the Department of Defense through DLA Aviation at Tinker Air Force Base, Oklahoma, with the contracting office located at 3001 Staff Drive, Tinker AFB, OK 73145-3070. The response deadline has been extended to July 15, 2026, with the official submission cutoff set for July 16, 2026, at 4:59 a.m. The procurement is categorized under NAICS code 336413, indicating aerospace product and parts manufacturing. Primary point of contact is Genevee Suba, Buyer with DLR Procurement Operations (AO), reachable via email at Genevee.Suba@us.af.mil and phone at (385) 591-8615; no Contracting Officer’s Representative or Technical Representative is listed. The solicitation incorporates specific FAR clauses including 52.232-16 for Payment by Electronic Funds Transfer, 52.244-6 governing Subcontracts, and 52.222-90 mandating compliance with the Fair Pay and Safe Workplaces Executive Order. No contract value, pricing details, CLINs, or estimated budget figures are provided in the available documentation. The place of performance is Tinker AFB, Oklahoma, and while submission is accepted through electronic communication or letter, the exact portal or system is not specified. The solicitation references an amendment (SPRTA1-26-R-0218-0001) effective May 13, 2026, which introduced the aforementioned clauses but does not include detailed specifications, technical requirements, or performance metrics for the Door Aircraft procurement. No inspection criteria, packaging and marking standards, delivery schedules, FOB terms, evaluation factors, or award basis details are disclosed. Offerors are expected to comply with federal representation and certification requirements, though no completed affirmations regarding size status, UEI/CAGE codes, or socioeconomic status are indicated. All attachments referenced as “See Attachment” remain unspecified, and no formal list of attachments, page limits, or submission volume structure is provided. Invoicing methods, accounting data such as TAS or ACRN, and COR/COTR details are also absent from the provided information.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 24 days
View Details