Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTROL ASSEMBLY, TRANS

Active
SPE7L2-26-Q-0011Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one Control Assembly, Transmission Bearing Restrictions with NSN 2520-01-535-2760, subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, where each R or I code must be fully understood and complied with. The acquisition is governed by DLA packaging standards, mandates the removal of government identification from non-accepted supplies, and enforces Covered Defense Information protocols. The contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by an approved Third-Party Assessment Organization and adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Any configuration changes require formal engineering change proposals and variance requests, and inspection and acceptance are to occur at the origin. Components within the assembly must be sourced only from qualified products or manufacturers listed on approved QPLs or QMLs as defined in procurement note H02. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign nationals regardless of location; only contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal DLA authorization may access such data. The delivery timeline is set for 250 days after delivery order, and the solicitation issued under SPE7L2-26-Q-0011 closes on August 11, 2026, with performance located in New Cumberland, Pennsylvania.

General Info

Procure one transmission bearing assembly with strict CMMC Level 2, ITAR/EAR controls, QPL sourcing, and 250-day delivery to New Cumberland, PA.

Agency

Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLESView Agency

NAICS

336350 - Motor Vehicle Transmission and Power Train Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L2-26-Q-0011.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
View Agency Profile
Office AddressUS
Contacts
Shaun Sehgal
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTROL ASSEMBLY,TRANSMISSION BEARING RESTRICTIONS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2520-01-535-2760 Quantity: 1 EA Purchase Request: 7017601092QTY: 1 Delivery: 250 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336350
New
DIBBS
GEARCASE-MOTOR
Solicitation # SPE7L1-26-T-910H
The contract pertains to the procurement of a GEARCASE-MOTOR with NSN 3010-01-472-9627 and part number 83A1410, supplied by GLOBE MOTORS, INC., in a quantity of eleven units. Delivery is required within 52 days from the contract date, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance both occur at the destination, specifically at DLA Distribution Warner Robins, Building 376, Robins AFB, GA. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all items must be marked and labeled per MIL-STD-129. Palletization must adhere to RP001 DLA Packaging Requirements. The unit of issue is each, priced at $11.00 per unit, with a total contract value of $121.00. The original required delivery date is February 12, 2027, though a need ship date of October 6, 2026, is also noted. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7L1-26-T-910H, with a response deadline of August 14, 2026, and the contract falls under NAICS code 336350. The primary point of contact is Meghan Ruehle, reachable through the DLA. All government identification must be removed from non-accepted supplies as this is designated a critical application item.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336350
New
DIBBS
CLUTCH ASSEMBLY, FRI
Solicitation # SPE7L1-26-T-908W
The contract involves the procurement of 30 clutch assemblies, friction type, with NSN 2520-00-446-2486 under solicitation SPE7L1-26-T-908W, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The delivery is scheduled for 316 days after award, with responses due by August 14, 2026, and the place of performance is designated as Anniston, Alabama with a zip code of 36201-4199. The contract is governed under NAICS code 336350 and is classified as a federal solicitation, with Meghan Ruehle listed as the primary point of contact for inquiries. The technical data associated with this clutch assembly is subject to stringent export controls under either ITAR or EAR, meaning any disclosure of technical information to foreign persons, regardless of location, requires prior authorization from the Departments of State or Commerce. Distribution of this controlled data is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have received formal approval from the DLA controlling authority. DFARS 252.225-7048 applies to all aspects of this data handling requirement, ensuring compliance with U.S. national security protocols throughout the lifecycle of the contract.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336350
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7LX-26-U-9189
The contract pertains to the procurement of a mounting plate identified by NSN 2510015633681 and part number 29546544 from ALLISON TRANSMISSION INC, with a quantity of 215 units at a unit price of $215.00, totaling $46,225.00. The item is covered under DLA Direct, CONUS, with delivery required within 82 days FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, subject to precedence by the DLA Master List of Technical and Quality Requirements. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements for Procurement. The unit of issue is each (EA), and the quantity per unit pack is specified as 001. The solicitation number is SPE7LX-26-U-9189, issued under a Total Small Business Set-Aside with NAICS code 336350, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026. Technical and quality requirements referenced through R or I numbers are sourced from the DLA Master List accessible via the official DLA website, and the applicable revision is determined by the solicitation issue date for simplified acquisitions. The point of contact for queries is Theodore Misiolek, reachable via email and phone. The contract does not guarantee purchase of the estimated quantity, as it is subject to the IDC’s final needs.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
CLUTCH DISC, ACTUATO
Solicitation # SPE4A7-26-Q-0930
The contract pertains to the procurement of 600 units of a clutch disc actuator with NSN 1680-00-128-8335 and part number 367236-1, sourced from AEROCONTROLEX GROUP, INC. The item is designated as a critical application item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging requirements, with materials packed in accordance with ASTM D3951 where not overridden by DLA standards. The contract mandates zero tolerance for non-conformances under sampling protocols based on MIL-STD-1916 or ASQ H1331, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Inspection and acceptance occur at origin, with delivery required at destination within 263 days after award, and no variance in quantity is permitted. Cybersecurity compliance is required at CMMC Level 2 via self-assessment, and covered defense information protocols apply. All items must be physically marked as per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Measuring and test equipment used in production must conform to RT001 standards, and source approval documentation must be submitted as required by RC001. The contract identifies proprietary or insufficient data as a barrier to competitive procurement, and the unit of issue is defined per DLA’s official references. Delivery instructions specify the Hill AFB, Utah depot as the freight and parcel post address, with transportation governed by DLAD procedures C19 and C20. The solicitation number is SPE4A7-26-Q-0930, awarded to AEROCONTROLEX GROUP, INC., with performance and payment obligations tied to the contractual delivery schedule and strict compliance with all referenced military and government quality directives.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336350
New
DIBBS
ACTUATOR, DIFFERENTIAL
Solicitation # SPE7L4-26-T-5959
The contract pertains to the procurement of six Actuators, Differential Carrier, identified by NSN 2520-01-379-4810 and General Motors part number 26013495, under solicitation SPE7L4-26-T-5959. Delivery is required within five days of award, with supplies to be shipped FOB origin, and no tolerance is permitted for quantity variance—the exact quantity of six units must be delivered. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, including the use of unit container BS and packaging code U. All packaging and shipping must adhere to DLA’s procurement requirements, with no ozone-depleting chemicals permitted under any circumstances, and any substitute materials require prior approval unless explicitly authorized by the specification. The delivery destination and shipping address is Wheeler Army Airfield in Hawaii, with the government point of contact designated for receipt and notification. The contract is subject to the DLA Master List of Technical and Quality Requirements, and all applicable technical and quality obligations referenced by R or I numbers are incorporated by full text. The item is classified as a non-hazardous military supply with no special marking required, and transportation is governed by DLAD procedure notes C19 and C20. The original required delivery date is July 31, 2026, and the procurement is under a federal acquisition framework with NAICS code 336350, managed by the Department of Defense’s Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336350
New
DIBBS
ACTUATOR, ELECTROMECHAN
Solicitation # SPE7L3-26-T-145P
The contract specifies the procurement of two electromechanical rotary actuators, part number 12273-S727-300, manufactured by Curtiss-Wright Flow Control Corporation, with NSN 3010-01-561-3698. The units are to be delivered FOB origin within 358 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including preservative methods, unit container type D3, and intermediate containment per specified standards. Marking follows MIL-STD-129 with no special marking required, and palletization adheres to DLA packaging requirements. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract references technical and quality standards from the DLA Master List, with revisions controlled by the solicitation issue date. The solicitation number is SPE7L3-26-T-145P, issued on August 3, 2026, with responses due by August 14, 2026. The original required delivery date was October 14, 2026, though the need ship date is set for August 8, 2027. The point of contact for inquiries is Karen McCarley, and the NAICS code is 336350.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
SOCKET, HAND TURNING
Solicitation # SPE7L3-26-T-146J
The contract pertains to the procurement of SOCKET, HAND TURNING with NSN 3010-01-593-3081 and part number 57685, supplied by SSS CLUTCH CO, INC under solicitation SPE7L3-26-T-146J. A total of 28 units are required at a unit price of $28.00, with delivery due within 157 days from the contract award, FOB origin, and inspection and acceptance to occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and the shipment is destined for the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces strict adherence to DLA’s Master List of Technical and Quality Requirements, with specific sampling protocols based on MIL-STD-1916 or ASQ H1331, mandating zero non-conformances unless otherwise specified, and assigning verification levels or AQLs based on attribute criticality. Any configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional purposes in batteries, instrumentation, or weapon systems, and portable devices containing mercury must include shock-proof design with secondary containment per NAVSEA 5100-003D. The acquisition falls under NAICS code 336350, with the contract managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, and all technical and quality provisions are governed by current revisions of the DLA Master List effective on the solicitation issuance or award date. The required delivery date is April 12, 2027, with an earlier need ship date of January 19, 2027.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336350
New
DIBBS
PISTON, LINEAR ACTUATIN
Solicitation # SPE7L1-26-T-907F
The contract is for the procurement of 17 units of a piston, linear actuating cylinder with NSN 3040-14-552-2496 and part number 1216-262-400C, issued under solicitation SPE7L1-26-T-907F. The item must be delivered FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination. Delivery is required within 157 days from the award date, with an original required delivery date of March 8, 2027, and a need ship date of January 19, 2027. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special marking codes. The unit of issue is each, priced at $17.00 per unit, totaling $289. The product is subject to strict prohibitions against class I ozone-depleting chemicals, which override any conflicting specification but do not reduce performance requirements; substitute chemicals require prior approval. The material has no shelf life requirement. The delivery address is DLA Distribution’s New Cumberland facility in Pennsylvania, and transportation instructions follow DLA procedural notes C19 and C20. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The contract is managed by the Department of Defense’s Land Supply Chain under NAICS 336350, with primary point of contact Meghan Ruehle.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336350
New
DIBBS
LEVER ASSEMBLY, MANU
Solicitation # SPE7L1-26-T-870J
The contract covers the procurement of nine manual lever assemblies, identified by NSN 3040015735672 and part number 061475-105 from HYDRAULICS INTERNATIONAL, INC., under solicitation SPE7L1-26-T-870J. The unit price is $9.00 per unit, resulting in a total contract value of $81.00, with no variance allowed in quantity and delivery required within 168 days after order placement, with an original delivery date of February 6, 2027, and a need ship date of January 19, 2027. Delivery is FOB origin, with inspection and acceptance occurring at the destination facility located at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. All packaging and marking must comply with ASTM D3951, but are superseded by the DLA Master List of Technical and Quality Requirements, which must be referenced and adhered to. Labeling and palletization are governed by MIL-STD-129 and RP001, with specific requirements for unit of issue, quantity per unit pack, and barcoding. The item is designated as a critical application item, and cybersecurity requirements under CMMC Level 2 self-assessment apply, in addition to the mandatory safeguarding of covered defense information under DFARS 252.204-7012. The contractor must comply with all applicable Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including electronic submission of invoices via Wide Area WorkFlow, employment eligibility verification, combating trafficking in persons, sustainable procurement, prohibition of hexavalent chromium, and restrictions on acquiring covered defense telecommunications equipment. The contract enforces strict compliance with government property handling, whistleblower protections, and limitations on arbitration agreements. All representations and certifications, including UEI and CAGE codes for any entity providing covered telecommunications equipment, size status, and socioeconomic certifications, must be accurately submitted. Invoicing, payment, and contract administration are managed through DLA’s electronic systems, with no deviation permitted from the established procedures.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336350
New
Federal
Truck Transfer Case
Solicitation # W911S226U3908
The contract titled Truck Transfer Case under solicitation number W911S226U3908 is a small business set aside for total award, targeting vendors classified as small businesses under NAICS code 336350, which pertains to motor vehicleParts and accessories manufacturing. The solicitation was posted on August 3, 2026, with a response deadline of August 10, 2026, at 3:00 PM Eastern Time. It is structured as a combined solicitation, indicating potential use of multiple contracting methods or evaluation criteria. The issuing agency is the Department of Defense, specifically the W6QM Micc-Ft Drum office located at Fort Drum, New York, with a place of performance listed in Columbia, South Carolina, zip code 29207. Primary point of contact for inquiries is Henry Gordon, reachable via email at henry.n.gordon.civ@army.mil or phone at 8034457405. All proposals must be submitted through the SAM.gov platform using the provided UI link.
W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336350
New
DIBBS
Steering Knuckle Manufacturing and SupplyThe contract seeks the manufacture and supply of steering knuckles designated by NSN 2530015765864 for use in military vehicles, encompassing all phases from material sourcing and precision machining to final quality assurance, packaging, and timely delivery. The work requires strict adherence to military specifications and performance standards, with full responsibility placed on the contractor to ensure dimensional accuracy, material integrity, and durability under operational stress. Quality control processes must be documented and verifiable, with inspections conducted throughout production to meet defense-grade requirements. This is a total small business set-aside under the SBA program, exclusively available to qualified small businesses as defined by NAICS code 336350, which covers automotive parts manufacturing. The contract was posted on August 2, 2026, with responses due by August 17, 2026, and is administered by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization. The place of performance and point of contact details are not specified, but all deliverables must fulfill the logistical and compliance demands of the U.S. military supply chain. Proposals must be submitted through the designated DIBBS platform.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336350
New
DIBBS
KNUCKLE, STEERING
Solicitation # SPE7L3-26-U-0670
The contract pertains to the procurement of steering knuckles, identified by NSN 2530-01-576-5864 and part number TDA A3111D3540, under solicitation SPE7L3-26-U-0670, issued by the Defense Logistics Agency’s Land and Maritime division. This is an indefinite-delivery/indefinite-quantity (IDIQ) contract with a statutory ceiling of $350,000 and an estimated quantity of 10 units, though no fixed purchase obligation exists beyond the first delivery order. The contract is a total small business set-aside under NAICS code 336350, requiring offerors to represent their small business status and any applicable socioeconomic designations such as WOSB, SDVOSB, or HUBZone. Delivery must occur within 75 days of award, with FOB Origin terms, and all items are subject to inspection and acceptance at the destination. Packaging, marking, and palletization must adhere strictly to DLA’s RP001 requirements and MIL-STD-129, superseding ASTM D3951 where applicable. Non-hazardous materials must be commercially packaged per ASTM D3951, while hazardous materials, as defined by FED-STD-313, must follow TQ Requirement IP025. All packaging must bear proper barcoding, unit of issue, and quantity per unit pack as specified, with compliance enforced through DFARS 252.223-7001 for hazard labeling and 29 CFR 1910.1200 for hazard communication. The contract incorporates numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses governing compliance with labor, environmental, cybersecurity, and ethical standards, including equal opportunity, combating trafficking, employment verification, sustainable procurement, safeguarding covered defense information, and restrictions on hexavalent chromium and Communist Chinese military companies. Invoicing must be submitted exclusively through Wide Area WorkFlow (WAWF), with payment processed via designated DoDAACs not specified in the solicitation but to be confirmed upon award. Ocean transportation, if utilized, is subject to strict compliance with U.S.-flag vessel requirements, prior approval for foreign-flag vessels, and mandatory post-shipping reporting to MARAD. Offerors must submit proposals electronically via the DLA Internet Bid Board System by
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 Assessment Support)The contract supports achieving CMMC Level 2 certification by providing comprehensive cybersecurity compliance services, including a detailed gap assessment against NIST SP 800-171 and DFARS requirements, development of necessary documentation, and active coordination with a Certified Third-Party Assessment Organization to ensure alignment with federal cyber standards. The work is focused on preparing the organization for official assessment and certification, covering all technical, procedural, and administrative elements required under the CMMC framework. This subcontract is tied to the Department of Defense’s Land Supplier Opns Wheeled Vehicles initiative and requires performance at the location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. It falls under NAICS code 541512, indicating it relates to computer systems design and related services, and is intended to enable defense contractors to meet mandatory cybersecurity obligations for handling controlled unclassified information within the supply chain.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials and Environmental Compliance ManagementThe contract requires the identification and comprehensive management of hazardous materials used in production processes, with a strict prohibition against the use of any ozone-depleting chemicals. All safety data sheets must be prepared in full compliance with OSHA’s 29 CFR 1910.1200 standards to ensure accurate documentation, handling, and emergency response protocols for toxic and hazardous substances. The scope encompasses ongoing monitoring, reporting, and administrative control of materials to meet environmental and workplace safety regulations, with a direct focus on maintaining compliance throughout the manufacturing lifecycle. This subcontract is issued under NAICS code 541620 and is associated with the Department of Defense’s Land Supplier Operations for Wheeled Vehicles, with performance required at the Anniston location with ZIP code 36201-4199. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. Although no set-aside classification or point of contact is specified, the contract underscores the necessity of strict environmental stewardship and regulatory alignment as part of defense supply chain obligations.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Technical Data and Drawing Compliance SupportThe contract requires engineering support to ensure compliance with the military technical drawings in the NR 19207 series, focusing on geometric dimensioning and tolerancing validation, accurate interpretation of technical drawings, and thorough documentation for audit purposes. This work is critical to maintaining precision and regulatory adherence in the manufacturing and assembly processes for wheeled vehicles under Department of Defense oversight. All deliverables must demonstrate strict alignment with established military specifications and provide clear, traceable records to support quality assurance and compliance reviews. The opportunity is structured as a subcontract with a NAICS code of 541330, indicating it falls under engineering services. The place of performance is specified as Anniston, Alabama, with a closing date for responses set for August 13, 2026, and the solicitation was posted on August 2, 2026. The work is managed under the Land Supplier Operations Wheeled Vehicles organization within the Department of Defense, and the contract will be administered through the DIBBS system using the reference number SPE7L226T0589. There is no set-aside designation, meaning all eligible subcontractors may compete for the award.
Engineering Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining and Assembly of Manual Control LeverThe contract entails the precision machining and assembly of three manual control levers identified by NSN 3040014911954, manufactured strictly in accordance with military drawings from the NR 19207 series and conforming to established quality standards including MIL-STD-1916 and ASQ Z1.4. All work must meet rigorous defense specifications to ensure reliability and performance under operational conditions, with production focused on achieving defect-free units through controlled processes and documented inspections. The contract is structured as a subcontract under NAICS code 332710, indicating specialized metal fabrication and machining activities for defense applications. Performance is required at the designated facility in Anniston, Alabama, with a response deadline of August 13, 2026, and the solicitation was posted on August 2, 2026. The awarding agency is the Department of Defense, specifically under Land Supplier Operations Wheeled Vehicles, reflecting the importance of this component in military ground vehicle systems. The contract does not specify a set-aside designation and is accessible through the DIBBS platform, with no point of contact listed publicly. All submissions must adhere to the technical and quality requirements without deviation, as compliance is critical for acceptance and integration into military platforms.
Machine Shops

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
LEVER, MANUAL CONTRO
Solicitation # SPE7L2-26-T-0589
The contract involves the procurement of three manual control levers with NSN 3040-01-491-1954 under solicitation SPE7L2-26-T-0589, with a response deadline of August 13, 2026, and a delivery requirement of 245 days after award. The item falls under NAICS code 333613 and is sourced by the Department of Defense’s Land Supplier Operations Wheeled Vehicles office, with performance specified at Anniston, Alabama, 36201-4199. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and unauthorized removal of government identification from non-accepted supplies is prohibited. The technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Cybersecurity requirements mandate CMMC Level 2 certification by a qualified third-party assessment organization, and all handling of controlled data must adhere to DFARS 252.225-7048 provisions for protection against unauthorized disclosure to foreign persons.
Mechanical Power Transmission Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance and Testing ServicesThe contract calls for independent product verification testing, sampling, and compliance validation of mechanical housings, executed in strict alignment with DLA PVT protocols and established quality requirements. The work involves thorough assessment of components to ensure they meet specified performance, durability, and regulatory standards, with testing procedures designed to verify conformance across production batches. Sampling strategies and test methodologies must be scientifically rigorous and fully documented to support audit readiness and continuous quality assurance. Performance is mandated to occur at a designated location in Tracy, California, with a response deadline set for August 7, 2026, following a posting date of July 31, 2026. This subcontract is classified under NAICS code 541380, reflecting its focus on scientific and technical consulting services related to quality control and product testing. The contracting entity is the Department of Defense through the Land Supplier Operations Wheeled Vehicles office, indicating this effort supports defense-related procurement and supply chain integrity. All deliverables must satisfy stringent federal quality benchmarks and be conducted in a manner that supports traceability, reproducibility, and compliance verification for military systems.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Specialized Packaging and LogisticsThe contract requires specialized military-standard packaging, labeling, bar-coding, and transportation of mechanical housings to the Defense Logistics Agency facility in Tracy, California, under the FDT program and in strict compliance with MIL-STD-129. All packaging and labeling must meet exacting defense standards to ensure traceability, durability, and readiness for military use, with barcoding systems designed for seamless integration into DoD logistics networks. Transportation logistics must ensure timely, secure delivery to the specified delivery point in Tracy, with all activities governed by the stringent requirements of the FDT program to maintain operational readiness and accountability. This subcontract is scheduled for response by August 7, 2026, and falls under the NAICS code 484220 for truck transportation, reflecting the critical role of ground logistics in fulfilling the contract’s demands. The award will be managed under the Department of Defense’s Land Supplier Operations Wheeled Vehicles organization, which oversees support for ground vehicle components across the military supply chain. While no formal set-aside designation is noted, the contract is open to qualified subcontractors capable of meeting the technical precision and compliance benchmarks required for defense logistics operations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining and Finishing ServicesThe contract calls for secondary precision machining, surface finishing, and dimensional inspection of cast mechanical housings to ensure full compliance with military specifications and government acceptance standards. Work must be performed to exacting tolerances, with an emphasis on quality control and repeatable results that meet rigorous defense sector requirements. The scope focuses on post-casting enhancements, where components undergo detailed processing to achieve functional integrity, surface uniformity, and verified dimensional accuracy as mandated by federal defense protocols. Performance is required at a designated location in Tracy, California, with the NAICS code 332722 identifying the service as secondary machining and finishing operations. This is classified as a subcontract opportunity under the Department of Defense, specifically managed by LAND SUPPLIER OPNS WHEELED VEHICLES. The solicitation was posted on July 31, 2026, with a firm deadline for responses on August 7, 2026, indicating a tight seven-day window for qualified vendors to submit proposals. All submissions must demonstrate capability to meet military-grade standards, and compliance with the specified place of performance is mandatory.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 332111
New
DIBBS
Mechanical Housing ManufacturingThe contract calls for the manufacture of a mechanical housing using metal casting and machining techniques, with strict adherence to Department of Defense specifications issued by the Land Supplier Operations Wheeled Vehicles office. All work must comply with DLA requirements and include comprehensive quality testing to ensure dimensional accuracy, material integrity, and functional performance. The contractor is expected to utilize Government Furnished Property as part of the production process, which implies direct involvement with federally owned materials or components that must be handled, incorporated, and accounted for according to established protocols. The place of performance is designated as Tracy, California, with a zip code of 95304-5000, indicating where all manufacturing, testing, and delivery activities are to occur. The solicitation, posted on July 31, 2026, has a response deadline of August 7, 2026, and is structured as a subcontract under NAICS code 332111, which classifies it within the forging and stamping industry. While the type of set aside is not specified, the nature of the procurement suggests it is part of a larger defense production effort, likely supporting military vehicle systems. The contractor must be prepared to meet stringent delivery timelines and quality benchmarks, with full responsibility for ensuring that the final product aligns with technical and regulatory standards dictated by the DoD. All deliverables are subject to inspection and acceptance by government representatives at the designated performance location.
Iron and Steel Forging

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
FOB Origin Shipping and LogisticsThe contract encompasses domestic freight coordination and delivery services from the manufacturer’s location to DLA Distribution in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the buyer assumes responsibility for the shipment once it leaves the seller’s facility. The contractor is required to manage all logistics, including transportation, tracking, and timely delivery, while ensuring full compliance with DLA’s operational requirements. Electronic Data Interchange for receiving reports and proof of delivery must be implemented to maintain accurate, real-time documentation and streamline the receipt process within DLA’s supply chain system. The opportunity is classified as a subcontract with a NAICS code of 484220, indicating it pertains to truck transportation for freight and commodities. The solicitation was posted on July 31, 2026, and responses are due by August 7, 2026, with performance centered at the New Cumberland, PA facility identified by the ZIP code 17070-5002. The contracting entity falls under the Department of Defense, specifically the Land Supplier Operations Wheeled Vehicles organization, and all activities must support its logistical needs without additional specifications beyond the FOB Origin condition and EDI compliance.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 323111
New
DIBBS
Military Container Marking and LabelingThe contract requires strict adherence to MIL-STD-129 standards for marking military containers, encompassing the application of unique identifiers such as UID Data Matrix codes, National Stock Numbers, CAGE codes, handling labels, and barcodes on both individual unit packaging and outer shipping containers. All labeling must meet precise government specifications to ensure traceability, inventory accuracy, and logistical efficiency across the defense supply chain. The work is scoped to the production environment and must be performed with exacting quality control to comply with Department of Defense requirements. This is a subcontract opportunity under NAICS code 323111, with a response deadline of August 7, 2026, and performance location specified as New Cumberland, Pennsylvania, zip code 17070-5002. The contracting activity falls under the Land Supplier Opns Wheeled Vehicles office of the Department of Defense, indicating the focus is on labeling for ground vehicle systems and associated equipment. The solicitation is open to qualified subcontractors capable of executing high-volume, compliant marking operations, with no set-aside designation specified, making it open to all eligible businesses.
Commercial Printing (except Screen and Books)

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 322299
New
DIBBS
Military-Grade Packaging and PreservationThe contract requires the packaging and preservation of fuel injector assemblies in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring long-term protection against corrosion, physical damage, and environmental degradation. This includes the application of vapor corrosion inhibitors, proper cushioning materials, and sealed storage solutions designed for extended military storage conditions. All procedures must meet exacting DoD requirements to maintain component integrity during storage and transit. This is a subcontract opportunity under the NAICS code 322299, with performance expected at the New Cumberland location, zip 17070-5002. The solicitation was posted on July 31, 2026, and responses are due by August 7, 2026. The contracting entity operates under the Department of Defense, specifically for Land Supplier Ops Wheeled Vehicles, and the work is part of a broader effort to ensure reliable logistics support for military ground vehicle systems.
All Other Converted Paper Product Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details