Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONTROL, DIRECTIONAL SI

Active
SPE4A6-26-T-05MKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a single unit of a control directional signal light for automotive use, identified by NSN 6220017221530 and part number A06-36956-003, supplied by Daimler Truck North America LLC. The item is classified as a critical application item and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. Acceptance is governed by zero-defect sampling standards under MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major and all inspections resulting in zero non-conformances required unless otherwise stated. The item must be packaged per MIL-STD-2073-1E, marked per MIL-STD-129 with a Fragile designation, and palletized according to DLA packaging requirements. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The sole delivery point is the Naval Construction Group One at Port Hueneme, California, with explicit instructions to avoid parcel post and ship via the fastest traceable method. The contract references multiple DLA-specific codes for packaging, marking, and logistics, and includes government-only fields for tracking and disposition. The purchase request number is 7017351803, the contract number is SPE4A6-26-T-05MK, and the original required delivery date is June 29, 2026. The point of contact is Thanh Hue Nguyen of the ASC Commodities Division within the Department of Defense.

General Info

One control signal light, NSN 6220017221530, delivered FOB origin to Port Hueneme by June 29, 2026, zero-defect, MIL-STD compliant.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

1991 PACIFIC RD BLDG 375, PORT HUENEME, CA, 93043-4306, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05MK DLA Aviation Jul 13 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
THANH HUE Nguyen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTROL,DIRECTIONAL SIGNAL LIGHT,AUTOMOT
CONTROL,DIRECTIONAL SIGNAL LIGHT,AUTOMOTIVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
DAIMLER TRUCK NORTH AMERICA LLC 64678 P/N A06-36956-003
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017351803 0001 EA 1.000
SPE4A6-26-T-05MK
SECTION B
PR: 7017351803 PRLI: 0001 CONT’D
NSN/MATERIAL:6220017221530
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N55752
NAVAL CONSTRUCTION GROUP ONE
1991 PACIFIC RD BLDG 375
PORT HUENEME CA 93043-4306
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N55752
NAVAL CONSTRUCTION GROUP ONE
1991 PACIFIC RD
BLDG 375
PORT HUENEME CA 93043
US
M/F: (TCN) N5575261631020
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:06/29/2026
SPE4A6-26-T-05MK NSN/Part Number: 6220-01-722-1530 Quantity: 1 EA Purchase Request: 7017351803QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 335999
New
DIBBS
INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving identified by NSN 5970000631496 and part number M23053/1-105-0, compliant with SAE AS23053/1 Revision A and SAE AS23053C Revision C, and must be manufactured or assembled by an accredited facility listed on the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List accessible via EAUDITNET.COM. The item is classified as a commercial item with a Type 2 shelf life of 12 months, extendable, and marked with Special Marking Code 33. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels for attributes are fixed at VII for critical, IV for major, and II for minor. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129R, with materials supplied on reels or spools properly marked in accordance with both MIL-STD-129 and ISO/IEC 16388, and palletization must meet DLA packaging standards. Delivery is FOB origin with a 20-day lead time, a 10% quantity variance allowed above the ordered one foot, and no tolerance below. Inspection and acceptance occur at origin. The item is critical for application and subject to full technical and quality requirements from the DLA Master List. Shipping must be via traceable freight, not parcel post, to the Naval Air Station Whidbey Island address in Oak Harbor, Washington, with an original required delivery date of July 7, 2026.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTRThe contract specifies the procurement of electrical insulation tape meeting strict technical and quality standards, with dimensions of 972 inches in length, 1 inch in width, and 0.0100 inches in thickness, colored red and supplied in rolls of 27 yards each. The product must comply with CID A-A-59163B Revision B dated 02/14/2022 and part number AA59163-1-I-0010, and is classified as a critical application item. Shelf life is limited to 12 months with extendable provisions under RS001 for TYPE 2 (CODE 4) items, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 and special code 33 for shelf life identification. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The item is subject to CMMC Level 2 self-assessment and controlled defense information protocols. Quantity is 5 rolls with no variance permitted, delivered FOB destination within 20 days, inspected and accepted at the destination. Unit of issue is RO, NSN is 5970011405672, and the solicitation number is SPE4A6-26-T-05KD, issued by the Defense Logistics Agency under the ASC Commodities Division. Item Unique Identification is not required per customer request, and all quality requirements referenced in the DLA Master List govern performance.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
CASE, SWITCH BOXThe contract pertains to the procurement of two CASE, SWITCH BOX units with NSN 5975-01-016-8263 under solicitation SPE4A7-26-T-565Q, with a delivery requirement of 110 days after delivery order. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendments. The contract includes stringent cybersecurity requirements mandating Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance, either through self-assessment or certification by a certified third-party assessment organization. Packaging must conform to DLA packaging standards, and inspection and acceptance occur at the manufacturer’s origin. All supplies must be physically marked as required, and non-accepted items must have government identification removed. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program status, who have completed DLA-mandated export control training and questionnaire and received explicit authorization. The place of performance is Fort Campbell, with Ashley Brown of the Department of Defense serving as the primary point of contact. The solicitation closes on July 20, 2026, and the NAICS code 335999 applies to this federal procurement.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
INSULATION KIT, SLEEVINThe contract is for an Insulation Kit, Sleeving with NSN 5970-01-326-1660 and part number FIT-105-MS-1, supplied by Alpha Wire Corp and Belden Inc, both with CAGE code 92194. Three units are required at a fixed quantity with zero variance, to be delivered within 20 days FOB origin to the specified address in Santa Fe, New Mexico. The item is classified as a Type I shelf-life item with a non-extendable 12-month shelf life, and must be marked accordingly per special marking code 32. Packaging must comply with MIL-STD-2073-1E Appendix D for kits, including cushioning to prevent movement, containment in a single box, and inclusion of a detailed contents list with part numbers and quantities. Marking and barcoding must conform to MIL-STD-129, and palletization follows DLA packaging requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Preservation methods, wrapping materials, and unit packaging are strictly defined. Delivery must be via traceable freight, excluding parcel post, and all documentation must align with DLA technical and quality requirements referenced in the DLA Master List. The contract specifies an original required delivery date of July 7, 2026, with a solicitation response deadline of July 20, 2026.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTRThis contract specifies the procurement of electrical insulation tape under the NSN 5970-00-612-8492 and part number MIL-I-19166-0.010X1.000, with a total quantity of two reels, each containing 108 feet for a combined length of 216 feet. The tape must comply with Technical Data Package Revision A Generation 1 in accordance with MIL-I-19166C, and it is classified as a commercial item. The product has a mandated shelf life of 12 months from the date of manufacture, which is non-extendable unless stored under strict humidity-controlled conditions of 50°F to 80°F and less than 75% relative humidity, at which point it may be inspected and recertified for extension up to a maximum of five years. All packaging, marking, and palletization must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special marking code 33 applied to indicate Type II shelf life. The tape must be sourced from manufacturers listed on the Qualified Products List QPL-19166-30, and component qualification requirements under RQ016 apply. Sampling and inspection must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with zero non-conformances required for acceptance unless otherwise directed. Delivery is FOB origin, with a 20-day required delivery window, and the product must be shipped via traceable freight methods—parcel post is prohibited. Inspection and acceptance occur at origin, and the contract prohibits any quantity variance. The item is subject to DLA’s master list of technical and quality requirements, including packaging and identification standards, and its unit of issue is the reel (RO). The delivery address and freight destination are identical, located at 2660 South Eber Road, Building 155, Swanton, Ohio 43558.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details