Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTROL, ELECTRONIC

Active
SPE8E8-26-T-5032Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of electronic control units under solicitation SPE8E8-26-T-5032, with a total quantity of nine units identified by NSN 6350-01-623-1250 and part numbers CI-CYP-20006 and S100XB2(24VDC)XA6XBRUTE. The items must be furnished FOB origin with no quantity variance allowed, delivered within 167 days, and inspected at destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, using unit container 10, dry preservation method, and no special marking. Packaging and shipping of hazardous materials, including mercury-containing components, are governed by strict prohibitions against intentional mercury addition except for approved functional applications such as specific instruments, sensors, controls, and naval-specified reagents, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All requirements referenced in the DLA Master List of Technical and Quality Requirements are incorporated by reference, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Delivery is to be made to the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, New Cumberland PA 17070-5002, with a required ship date of February 1, 2027, and an original delivery deadline of November 12, 2026. Transportation logistics follow DLAD Proc Notes C19 and C20, and the unit of issue is defined per DoD standards linked in the document. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with Alexis Selby as the primary point of contact. Covered defense information provisions apply, and all materials must conform to ANSI X12 unit of issue standards. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, under NAICS code 335311 for electronic control manufacturing.

General Info

Procure nine electronic control units, FOB origin, delivered by Feb 1, 2027, compliant with MIL-STD and hazardous material restrictions.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-T-5032.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTROL,ELECTRONIC
CONTROL,ELECTRONIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CONTINENTAL INSTRUMENTS LLC DIV 51677 P/N CI-CYP-20006
CONTINENTAL INSTRUMENTS LLC DIV 51677 P/N S100XB2(24VDC)XA6XBRUTE
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757332 0001 EA 9.000
NSN/MATERIAL:6350016231250
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE8E8-26-T-5032
SECTION B
PR: 7017757332 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:11/12/2026
SPE8E8-26-T-5032 NSN/Part Number: 6350-01-623-1250 Quantity: 9 EA Purchase Request: 7017757332QTY: 9 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12VM
The contract specifies a single unit of a cable assembly with NSN 6150016631413 and part number MK4654117-06, procured under solicitation SPE4A6-26-T-12VM for the USS NEW ORLEANS LPD 18. Delivery is required within 20 days FOB destination, with no variance permitted in quantity, and both inspection and acceptance occur at the delivery point. The item must be packaged per MIL-STD-2073-1E with packaging code U, marked in accordance with MIL-STD-129 using no special marking code, and palletized following DLA packaging requirements. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or an equivalent zero-based plan, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes default to major. Any configuration changes require an Engineering Change Proposal or variance request. The shipment is destined for FPO AP 96673, and transportation protocols C19 and C20 apply. The contract is issued by the Department of Defense’s ASC Commodities Division, with Berkeley Vaughan as the primary point of contact, and the required delivery date is June 8, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12SJ
The contract involves the procurement of a wiring harness with NSN/part number 6150-01-674-4547, quantity one unit, under solicitation SPE4A6-26-T-12SJ, with a response deadline of August 13, 2026, and delivery required 380 days after contract award. The item contains technical data subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled data is restricted to DLA contractors holding valid US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approved status through the DLA questionnaire process. The contracting activity is the ASC Commodities Division under the Department of Defense, with performance designated for New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Marcita Robinson, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
SENSING ELEMENT, FIR
Solicitation # SPE8E8-26-T-5052
The contract pertains to the procurement of 11 units of a FIR sensing element with NSN 6350-37-530-6236 and part number 90100040030-00A, supplied by CONSILIUM MARINE US INC and CONSILIUM MARINE & SAFETY AB. The unit price is $11.00 per unit, totaling $121.00, with delivery required FOB origin within 167 days from the contract award. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, including MIL-STD-129 for labeling and RP001 for palletization. If the item is hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging in accordance with ASTM D3951 is required, though DLA requirements take precedence. The item must be marked and labeled per specified standards, and the unit of issue is each (EA) with zero variance allowed in quantity. The required ship date is February 1, 2027, with an original delivery deadline of February 23, 2027. Transportation and shipping instructions reference DLAD procurement notes C19 and C20. The solicitation number is SPE8E8-26-T-5052, issued August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 335311 for the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-250E
The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
ALARM, BACK-UP, VEHIC
Solicitation # SPE8E8-26-T-5061
The contract pertains to the procurement of four units of an alarm, backup, vehicle system identified by NSN 6350-01-714-4239 and part number EP-0002558, with a unit price of $4.00 and a total price of $16.00. Delivery is required within 167 days from the contract date, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. The quantity permitted is strictly fixed at four units with zero variance allowed. Packaging must comply with DLA’s master list of technical and quality requirements, which supersede ASTM D3951, and hazardous materials must adhere to FED-STD-313 and TQ requirement IP025, while non-hazardous items must follow commercially acceptable packaging standards. All packaging and labeling must conform to MIL-STD-129, and palletization must meet RP001 DLA packaging requirements. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the required ship date set for February 1, 2027, and the original delivery deadline on February 26, 2027. The contract falls under solicitation SPE8E8-26-T-5061 issued by the Department of Defense through the DLA, with technical and quality specifications governed by the DLA Master List referenced through their official portal, and all documentation must align with the revision in effect on the solicitation issuance date.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
SIREN, ELECTRIC MOTO
Solicitation # SPE8E8-26-T-5035
The contract is for the procurement of eight electric sirens identified by NSN 6350-01-653-8128 under solicitation SPE8E8-26-T-5035, issued by the Department of Defense through the DLA New Cumberland Facility. The item is classified under NAICS code 335311 and requires delivery within 167 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size, and any amendments superseding prior versions. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the primary point of contact is Alexis Selby at alexis.selby@dla.mil or 312-444-8487. Performance is to be delivered to New Cumberland, Pennsylvania, with a zip code of 17070-5002, and full details are accessible via the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A5-26-T-330X
The contract pertains to the procurement of one unit of a wiring harness designated as P/N 458-59661-1 with NSN 6150-01-677-6345, issued under solicitation SPE4A5-26-T-330X by the Department of Defense through DLA. Delivery is required within 170 days to Tinker AFB, Oklahoma, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination per established military standards. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and palletization follows DLA’s specific packaging guidelines. The item is classified as a critical application and is subject to tailored quality requirements, including technical and quality specifications referenced from the DLA Master List. Zero-defect sampling is mandated under MIL-STD-1916 or equivalent zero-based plans unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted items. Unit of issue is each (EA), and the contract enforces strict adherence to DLA packaging, marking, and test equipment standards. The required delivery date was originally set for June 9, 2028, with a needed ship date of January 31, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-12SK
This contract pertains to the procurement of a cable assembly under solicitation SPE4A6-26-T-12SK, with a required quantity of 49 units and a delivery timeframe of 441 days after order. The item is governed by stringent technical and quality requirements including CMMC Level 2 certification for third-party assessment organizations, compliance with DFARS 252.225-7048 for export-controlled technical data, and adherence to ISO 9001:2015 quality standards for both manufacturers and non-manufacturers. All technical and quality provisions referenced are sourced from the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date depending on acquisition size. The cable assembly is subject to physical identification and bare item marking requirements, and all non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at specified levels or AQLs. Measuring and test equipment must meet defined standards. Export-controlled technical data associated with the item is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DLA export control training, and formal authorization. The item's NSN is 0001S00000053, and performance is directed to Texarkana, TX. The contract mandates compliance with DLA packaging standards and inspection at origin, and contractors new to this item or those altering chemistry or manufacturing processes are subject to additional fat testing requirements.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A5-26-T-330V
This contract pertains to the procurement of a wiring harness, specifically identified by part number 901-076-711-109 and NSN 6150-01-662-4945, for delivery in the quantity of nine units. The item is classified as a critical application item supplied by Bell Textron Inc and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 sampling standards with zero non-conformances required unless otherwise stipulated, and specifies verification levels and AQLs for critical, major, and minor attributes. Cybersecurity compliance is required at CMMC Level 2, and all items must be physically marked in accordance with RQ017, with packaging and marking conforming to MIL-STD-2073-1E and MIL-STD-129. The delivery is FOB origin with inspection and acceptance occurring at destination, and the full quantity must be delivered within 170 days from the contract award, with a required delivery date of April 26, 2029. Packaging and palletization follow DLA-specific requirements, and special marking is not required. The shipment destination is the DLA Distribution facility in New Cumberland, PA, and transportation guidelines are governed by DLAD procedural notes. The solicitation was issued under contract number SPE4A5-26-T-330V with a response deadline in August 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
SOCKET BASE, FIRE DE
Solicitation # SPE8E8-26-T-5079
The contract pertains to the procurement of eight socket base, fire de units identified by NSN 6350-33-210-9888 and part number SPB-ADAPT-NA from CONSILIUM MARINE & SAFETY AB. The solicitation number is SPE8E8-26-T-5079, with a response deadline of August 17, 2026, and a required delivery date of April 16, 2027, allowing 167 days for fulfillment. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The units must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which override any applicable ASTM D3951 standards, and must adhere to MIL-STD-129 for labeling. If deemed hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, subject to DLA standards. Palletization must comply with RP001, and all packaging must be marked with the specified Unit of Issue and Quantity per Unit Pack. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with a ship date of February 1, 2027. The contract references additional technical and documentation guidelines including SAR requirements and proper removal of government identification from non-accepted items. The unit price is $8.00 per ea, totaling $64.00.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A5-26-T-330W
The contract pertains to the procurement of a wiring harness designated by part number 901-175-506-109 and NSN 6150-01-460-6236, with a quantity of five units to be delivered within 170 days from the contract date. The item is classified as a critical application component under The Boeing Company and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances required unless otherwise stipulated. Quality Assurance is governed by ISO 9001:2015, and configuration changes require formal engineering change proposals or variance requests. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and all documentation must meet Source Approval Request (SAR) and packaging criteria outlined in DLA guidelines. The wiring harness must be packaged in compliance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking code applied. Palletization conforms to DLA Packaging Requirements, and delivery is FOB origin to the specified destination at Tracy, California, with both inspection and acceptance occurring at the delivery point. The unit of issue is each, priced at $5.00 per unit for a total of $25.00, with no variance permitted in quantity. Item Unique Identification is waived per Service customer request, and all materials must be free of Government identification if rejected. Transportation directives and freight details are governed by DLAD Proc Notes C19 and C20. The contract solicitation was issued on August 5, 2026, with responses due by August 13, 2026, under NAICS code 335311, managed by the Department of Defense’s ASC Supplier Oper OEM Division, with Takiya Dickson as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
Federal
CABLE, MOTOR POWER
Solicitation # N0010426QNE05
This contract pertains to the manufacture of the CABLE, MOTOR POWER under solicitation N0010426QNE05, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is subject to Emergency Acquisition Flexibilities and will be awarded bilaterally, requiring the contractor’s written acceptance before execution. All contractual documents are considered issued upon electronic transmission, including email. The specification mandates compliance with drawing 8630046-2 and incorporates key military standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and ISO 9001 for quality systems. The item must be mercury-free, with any use of metallic mercury requiring prior written approval and strict containment protocols to prevent contamination, particularly due to its corrosive and toxic risks in submarine and surface ship environments. Vendors must be certified under NAVSEA S9320-AM-PRO-020/MLDG, and each delivered assembly must include a certified Test Inspection Report. The contract imposes rigorous quality assurance obligations, requiring the contractor to maintain a government-acceptable quality system and assume full responsibility for inspection and compliance, regardless of whether government inspections are conducted. Inspection records must be retained for four years after final delivery. Packaging must follow MIL-STD-2073, and all subcontractors must adhere to the same requirements. The solicitation is set aside for small businesses and includes mandatory representations and certifications regarding veterans’ employment, workers with disabilities, Buy American provisions, and cybersecurity maturity levels. Payment will be processed via Wide Area Workflow with receiving report and invoice combo. The contractor must submit all configuration changes, deviations, or waivers through formal channels to the Contracting Officer, and unauthorized modifications are at the contractor’s sole risk. Offers are evaluated with consideration of past performance, and access to restricted documents requires authorization through designated government contacts. The response deadline is September 4, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details