This Solicitation opportunity from Department Of Defense was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CONTROL ROD

Closed

SPE4A7-26-T-644LFederal

Submission Closed08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L1-26-Q-1634

This solicitation is for the procurement of 94 units of a breech fitting for a bomb ejector rack, identified as NSN 1095-00-450-8483. The item is classified as a critical gun part with unique requirements and is subject to Government First Article Testing. The supplier must provide two exhibits: one fully assembled with finish and one machined but unassembled and unfinished. Delivery is required within 796 days after receipt of order. The item is designated as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and specific exception data applies to drawing 200415485. This federal acquisition is managed by the Department of Defense Land Supply Chain.

POSTED

DEADLINE

Supply of Reaction Cylinder Assemblies (NSN 2540016050547)

POSTED

DEADLINE

10--JURY STRUT ASSEMBLY

Solicitation # SPE7LX-26-U-002F

This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of five Jury Strut Assemblies under NSN 1055-01-127-8293. The contract is a total small business set-aside with a delivery requirement of 259 days after order. The agreement includes stringent technical and quality requirements, including CMMC Level 2 certification and adherence to DLA packaging and marking standards. Due to the nature of the items, the contract mandates compliance with demilitarization protocols for small arms parts and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # 46600-eRFQ-001981-2027

The Georgia Department of Public Safety, through the Georgia Public Safety Training Center, has issued solicitation 46600-eRFQ-001981-2027 to procure Staccato holsters. This Request for Quotes was posted on September 10, 2026, with a response deadline of September 16, 2026. The contract will run from the date of award through the end of the state's current fiscal year, which concludes on June 30, with the state maintaining four optional one-year renewal terms. Qualified suppliers must submit their responses via the GA@WORK Marketplace, including a completed cost worksheet, tax compliance forms, and a certificate of non-collusion. Evaluation criteria include cost, minimum experience, and a review of business litigation or debarment history over the last five years. Preference is given to businesses domiciled in Georgia. The procurement process also requires the submission of E-Verify forms and adherence to strict prohibitions regarding inmate contact. Kaylee Maynor serves as the primary point of contact for this solicitation.

Department of Public Safety

POSTED

DEADLINE

Manufacture of Mortar Plungers (NSN 1010017148005)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of Weapon System Component (NSN 1005-00-714-6365)

POSTED

DEADLINE

Supply of Gun Carriage Assemblies (NSN 1005-01-504-2915)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Component Manufacturing (Piston, Gun Gas Cylinder)

POSTED

DEADLINE

Supplier of Small Arms Cleaning Pull-Throughs (NSN 1005-01-478-2261)

POSTED

DEADLINE

Supply of 30mm Small Arms Bore Cleaning Brushes

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture and Supply of Resilient Weapon System Mounts (NSN 5342-00-143-0673)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

Solicitation SPE4A7-26-T-644L, issued by the Department of Defense ASC Supplier Oper AE and AF Div, is for the procurement of 1,642 units of Control Rods (NSN 5342014800092). The items are identified as commercial products and must conform to Technical Data Package Rev B Gen 2 and Basic Drawing 19207 12417724 Revision B. Delivery is required within 134 days after the order, with an original required delivery date of November 15, 2026. The shipping terms are FOB Destination, with the final delivery point being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Quality assurance is governed by strict sampling plans, including MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance criterion. Inspection and acceptance will occur at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001, including specific cleaning and drying preservation methods. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibiting hexavalent chromium, and mandatory hazardous material labeling per 29 CFR 1910.1200. Invoicing must be processed through the Wide Area Workflow system.

General Info

Procurement of 1,642 Control Rods delivered to DLA New Cumberland by November 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-644L for DLA Aviation Supplies

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 11

Solicitation

Response DeadlineAug 19

Deadline has passed

Submission Closed

08/19/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressUSA

Contacts

Christian Roberson

contact@example.gov

+1 (555) 000-0000

Full Description

CONTROL ROD
CONTROL ROD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
TDP Rev B Gen 2 IAW BASIC DRAWING NR 19207 12417724 REVISION NR B DTD 04/24/2006 PART PIECE NUMBER: 12417724-001
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12417724-001 REVISION NR DTD 05/28/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A7-26-T-644L
SECTION B
PR: 7017848891 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017848891 0001 EA 1,642.000
NSN/MATERIAL:5342014800092
DELIVERY (IN DAYS):0134
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:11/15/2026
SPE4A7-26-T-644L
SECTION B
PR: 7017848891 PRLI: 0001 CONT’D
SPE4A7-26-T-644L NSN/Part Number: 5342-01-480-0092 Quantity: 1,642 EA Purchase Request: 7017848891QTY: 1642 Delivery: 134 days ADO