Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Control System and Electrical Diagnostics

Active

State & Local

Response Deadline08/25/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks qualified contractors to troubleshoot and repair electrical control systems, sensors, wiring, and user interfaces specifically for in-ground lifts, with strict adherence to National Electrical Code and Occupational Safety and Health Administration electrical safety standards. Work will focus on maintaining the reliability and safety of critical lift infrastructure, requiring hands-on expertise in diagnosing and resolving complex electrical faults in commercial or institutional environments. All repairs must ensure operational integrity while upholding federal and industry-specific safety protocols. The contract is issued under NAICS code 238210 for electrical contracting and is structured as a subcontract through SCTM - South Coast Transit Management, with the place of performance located at Potomska Street in New Bedford, Massachusetts, ZIP code 02740. Proposals must be submitted by August 25, 2026, at 10:00 PM Eastern Time, following a posting date of July 28, 2026. There is no set-aside classification indicated, and no point of contact is provided in the solicitation details, though the official bid page can be accessed via the provided URL for further procedural instructions.

General Info

Electrical contracting for in-ground lift repairs per NEC and OSHA standards in New Bedford, MA, due August 25, 2026.

Agency

Massachusetts → SCTM - South Coast Transit ManagementView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Potomska Street New Bedford, MA, 02740, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 25

Submission deadline

Response Deadline

08/25/2026, 10:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → SCTM - South Coast Transit Management

ContactsNo contacts available

OfficeN/A

Organization / Agency

Massachusetts → SCTM - South Coast Transit Management

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Troubleshoot and repair electrical control systems, sensors, wiring, and user interfaces for in-ground lifts, ensuring compliance with NEC and OSHA electrical safety standards.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies throughout the terminal, including 17 main elevators, three service elevators, and three ramp landing elevators. This work is part of a broader initiative to enhance emergency communication capabilities in the facility and falls under the NAICS code 238210 for electrical contractors. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary oversight provided by Angela Peterson and project management handled by Christina Burdett. Although the solicitation is currently marked as a forecast with no formal solicitation number, the anticipated work is set for future release, and interested parties are encouraged to monitor the official portal for updates. All installations must be completed on-site at the Port of Seattle facility, with no specific location details provided beyond the general requirement to serve the identified elevator systems.

Aviation Project Management Group

POSTED

about 21 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle is preparing to replace the final 125 failing Robicon variable frequency drives as part of Phase 3 of its VFD replacement initiative under the Direct Buy Baseline approach. This effort involves the complete removal of outdated units and installation of new equipment designed to integrate seamlessly with the Port’s Direct Digital Controller system, enabling real-time energy usage monitoring, output control readings, and performance efficiency tracking. The scope includes all necessary wiring, testing, and commissioning activities to ensure the system operates reliably and efficiently from day one, with all associated hardware and labor required for full functionality covered under the contract. The project falls under NAICS code 238210 and is being managed by the Aviation Facilities & Infrastructure division. Primary point of contact is Yanet Maldonado, with Sharon Miick serving as project manager. The solicitation was posted on July 29, 2026, and while no set-aside details are specified, the initiative reflects a strategic infrastructure upgrade to modernize energy management systems across Port operations.

Aviation Facilities & Infrastructure

POSTED

about 21 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires comprehensive design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary goal is to enhance surveillance capabilities to support forensic investigations and enforce the Port’s movement rules and regulations by replacing outdated camera systems with modern, high-definition units. In the Bagwell area, coverage will be expanded along main terminal drive lanes and entrances, which currently have limited visibility beyond conveyor systems and security doors. In the North Cargo area, flexible surveillance will be implemented through pan-tilt-zoom units that offer user-controlled, broad surface area monitoring to bridge gaps in coverage and provide dynamic viewing capabilities. The project is managed by the Aviation Project Management Group under the Port of Seattle, with Angela Peterson as the primary point of contact and Randa Williams serving as Project Manager. The work falls under NAICS code 238210 for specialty trade contractors, indicating the need for specialized construction and systems integration expertise. The solicitation was posted in July 2026, signaling an upcoming procurement with no set-aside classification indicated. All installations must be completed at the specified Port locations, with no alternate performance addresses noted, and the contractor will be responsible for ensuring seamless integration of new technology into existing operational and security frameworks.

Aviation Project Management Group

POSTED

about 21 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing aqueous film-forming foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac, which contains per- and polyfluoroalkyl substances (PFAS). The project involves the complete removal of the contaminated foam and associated components, followed by the design and installation of a new full dry system including tanks, valves, pumps, sprinkler lines, sprinkler heads, and reserve tanks. All new equipment must be properly integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety standards. The effort is part of a broader initiative to eliminate PFAS from fire suppression infrastructure and transition to safer, environmentally responsible alternatives. This procurement is being re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, and is classified under NAICS code 238210 for sprinkler system installation contractors. The solicitation was posted on July 29, 2026, and is targeted at contractors capable of executing a rapid turnaround with minimal disruption to facility operations. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager. The project is expected to require precision in coordination with existing building systems and strict adherence to environmental remediation protocols during the removal phase.

Aviation Project Management Group

POSTED

about 21 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demo and replacement of the existing uninterruptible power supply system in a parking garage that supports critical infrastructure including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical components such as subpanels, feeders, disconnects, and breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, improving operational responsiveness and maintenance efficiency. All work must be performed in accordance with electrical and safety standards to maintain continuous function of parking access systems during power outages. The project is forecasted by the Port of Seattle under the Aviation Project Management Group with a NAICS code of 238210, indicating it falls within electrical contracting services. Primary contact for inquiries is Yanet Maldonado, reachable via phone or email, with JJ Jordan serving as the project manager. The solicitation was posted on July 29, 2026, and while no solicitation number or set-aside details are provided, potential bidders should refer to the official portal link for updated requirements, timelines, and submission guidelines. Performance location is tied to the parking garage managed by the Port of Seattle, though specific address details are not listed in the available data.

Aviation Project Management Group

POSTED

about 21 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2The contract covers a broad scope of electrical work to be performed across multiple Port of Seattle locations including Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. Work includes installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The contractor is responsible for providing all labor, tools, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port, with labor classified and compensated according to the Schedule of Unit Prices. The Port anticipates high volume demand for small electrical projects over the next year and plans to award two separate contracts to ensure timely execution and sufficient contractor capacity. This two-contractor strategy is designed to prevent delays and maintain operational continuity across Port facilities.

Port Construction Services

POSTED

about 21 hours ago

DEADLINE

Infrastructure - Invitation to Bid - DRUMHELLER COURTHOUSE Installation of a Stand – By Electrical Generator

Solicitation # AB-2026-05380

The contract involves the installation of a new 250 kW exterior natural gas standby generator at the south side of the Drumheller Courthouse, housed within a pre-manufactured walk-in enclosure mounted on a newly constructed concrete pad. The scope of work includes the supply and installation of all related electrical distribution equipment such as a main distribution panel, automatic transfer switch, and transformer, along with new service feeders connecting to the existing ATCO utility transformer. Modifications to the natural gas service line and meter are required to support the generator’s fuel supply, and all associated mechanical, electrical, and structural components necessary for safe and compliant operation must be completed. The project demands integrated coordination across multiple disciplines to ensure seamless integration with existing building systems and regulatory standards. The solicitation, designated AB-2026-05380, was posted by Infrastructure on July 29, 2026, with a bid submission deadline of August 27, 2026. The work is to be performed exclusively at the Drumheller Courthouse in Alberta. Sarah Hockley, the Project Procurement Specialist, serves as the primary point of contact for inquiries and can be reached via email at sarah.hockley@gov.ab.ca. The contract does not specify a set-aside classification or NAICS code, and bids must fully address all technical, logistical, and compliance requirements outlined in the invitation to ensure eligibility for award.

POSTED

about 22 hours ago

DEADLINE

Districtwide Electric Sub-Meters, State Center Community College District, Bid 2627-01C, Cupccaa

Solicitation # 20260728054

The contract requires the full furnishing of labor, materials, and equipment to install electrical sub-meters along with all associated power and data connections across all campuses of the State Center Community College District in California. All work must strictly adhere to applicable electrical codes, industry standards, and the District’s specific requirements, ensuring complete alignment with the approved plans and specifications. The project is scoped for districtwide implementation, with performance centered in Fresno, California, and all installations must be executed to support accurate energy monitoring and management throughout the facilities. Bidding for this solicitation, identified as Bid 2627-01C with solicitation number 20260728054, is open under the NAICS code 238210 for Electrical Contractors. Responses are due by September 10, 2026, at 9:00 PM Pacific Time, and the solicitation is issued by the State Center Community College District, a SLED agency. Point of contact for inquiries includes Teresa Campagna Bryant and Sofia McClellan, both reachable via their official district email addresses. The contract is accessible online through the BidAmerica platform, with no set-aside designation specified, and all bidders must meet the technical and regulatory criteria outlined in the submission package.

State Center Community College District

POSTED

DEADLINE

in about 1 month

E-Rate Eligible And California Multiple Award Schedule (CMAS) Certified Vendor In Systems Integration To Provide Technology Upgrades

Solicitation # 20260728053

The San Diego Unified School District is seeking an E-Rate eligible and California Multiple Award Schedule certified vendor in systems integration to provide technology upgrades under solicitation number 20260728053. The contract opportunity, posted on July 29, 2026, requires responses by August 20, 2026, and is categorized under NAICS code 238210 for specialty trade contractors. The work will be performed in San Diego, California, with a ZIP code of 92124, and is targeted toward educational infrastructure enhancements aligned with federal and state compliance standards. The primary point of contact for inquiries is Jennifer Damiano, reachable via email at jdamiano@sandi.net. This solicitation is open to vendors certified under both the E-Rate program and the California Multiple Award Schedule, ensuring qualifications meet required technical and procurement guidelines for K-12 technology modernization.

San Diego Unified School District

POSTED

DEADLINE

Hynes Floor Boxes U14

Solicitation # BD-27-1208-MCCA1-MCCA1-131740

The project involves the modernization of twelve combination electrical and communications floor boxes located on Level 3 of the Hynes Convention Center in Boston, Massachusetts. Work scope includes safely de-energizing and disconnecting existing electrical circuits, followed by selective demolition of the current floor boxes along with associated plumbing components such as floor drain bodies, traps, branch drain lines, and vent piping. All abandoned connections are to be properly capped and sealed in accordance with industry standards to ensure safety and compliance. The project is solicited under reference BD-27-1208-MCCA1-MCCA1-131740 by the Massachusetts Convention Center Authority, with responses due by August 26, 2026. The work is to be performed on-site at Summer Street, Boston, 02210, and is being managed by Purchaser Stephen Gentile. This initiative is part of ongoing infrastructure upgrades to enhance functionality and code compliance within the facility’s event spaces.

POSTED

DEADLINE

District-Wide Security Camera Installation

Solicitation # 20260728050

The Contractor is responsible for providing all labor, equipment, supervision, and incidental materials required to install District-furnished Verkada security cameras and associated low-voltage infrastructure across multiple sites within the Carlsbad Unified School District. This includes removing existing cameras, mounting new units, running and modifying cabling, utilizing existing pathways where possible, and installing new wiring in areas without prior infrastructure. The scope further encompasses full system integration with Verkada Command, configuration, testing, commissioning, and operational demonstration, along with comprehensive knowledge transfer to District personnel. All work must comply with applicable codes and standards and include project management, coordination of deliveries and reports, administrative documentation, and thorough site cleanup upon completion. The solicitation, titled District-Wide Security Camera Installation and identified by number 20260728050, is managed by the Carlsbad Unified School District in California with a response deadline of August 14, 2026. The contract falls under NAICS code 238210 and is targeted for performance in Carlsbad, CA, with a zip code of 92009. Primary points of contact for the bid are Robert Allen and Josh Gaines, reachable via phone at 760-331-5050 and 760-331-5007. The installation must result in a fully operational, integrated video surveillance system with no unfinished tasks, ensuring seamless functionality and adherence to all contractual and technical requirements.

Carlsbad Unified School District

POSTED

DEADLINE

Katherine Johnson Ms Security Cctv Upgrade

Solicitation # 20260728038

The contract involves upgrading the security infrastructure at Katherine Johnson Middle School in Sacramento, California, by replacing legacy analog intercom systems with modern IP-based notification endpoints and installing a new AI-powered Avigilon network video recorder and IP cameras. The scope includes deployment of new data switches and uninterruptible power supply units at the main and intermediate distributionframe locations to ensure reliable connectivity and power for the upgraded digital systems. Integration efforts will focus on connecting the new IP intercom and surveillance devices with the district’s existing Singlewire InformaCast platform to enable AI-driven video triggers and automated site-wide lockdown notifications, enhancing emergency response capabilities. All systems will undergo rigorous testing and commissioning to confirm seamless operational integration and system reliability. The solicitation, numbered 20260728038, was posted on July 29, 2026, with responses due by August 5, 2026, under the NAICS code 238210 for electrical contracting services. The project is managed by the San Juan Unified School District within the California state education system, and all work must be performed at the designated school location in Sacramento, zip code 95821. Primary points of contact include Narine Chilgevorkyan, Chris Cluff, and representatives from KM&M Services, with inquiries directed through their official email addresses. The contract does not specify any small business set-asides and is open to qualified contractors capable of delivering integrated security technology solutions.

San Juan Unified School District

POSTED

DEADLINE

More opportunities from Massachusetts → SCTM - South Coast Transit Management

Same awarding agency

Supply of Replacement Parts for Stertil-Koni LiftsThe contract entails the supply of OEM or approved aftermarket replacement components specifically for Stertil-Koni ST1100 FWA-US and ST-1085 FWA-US lift models, ensuring compatibility and performance standards equivalent to original equipment. The work is classified as a subcontract under NAICS code 423830, which pertains to commercial vehicle parts and accessories merchant wholesale, and performance is required at Potomska Street in New Bedford, Massachusetts, with a zip code of 02740. The solicitation was posted on July 28, 2026, and responses must be submitted by August 25, 2026, at 10:00 PM Eastern Time. The contracting organization is SCTM - South Coast Transit Management, operating under the Massachusetts state entity, with no set-aside provisions specified and no point of contact listed in the data.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Mechanical & Safety Evaluation of Vehicle LiftsThe contract involves performing comprehensive mechanical integrity checks, structural assessments, safety mechanism testing, and load testing on vehicle lifts to verify compliance with operational safety standards. These evaluations are essential to ensure the lifts function reliably and safely under real-world conditions, focusing on structural soundness, performance under load, and the effectiveness of all safety systems. The work is to be carried out at Potomska Street in New Bedford, Massachusetts, with all deliverables expected to meet industry-standard safety and operational benchmarks. The solicitation, titled Mechanical & Safety Evaluation of Vehicle Lifts, is classified as a subcontract under NAICS code 811310 and was posted on July 28, 2026. Proposals must be submitted by August 25, 2026, at 10:00 PM Eastern Time. The contracting entity is SCTM - South Coast Transit Management, operating under the Massachusetts state framework. No set-aside classification is specified, and the place of performance is strictly limited to the provided location in New Bedford. All work must be completed within the contractual timeframe and adhere to the safety and technical requirements outlined in the solicitation.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Electrical Systems Diagnostics & Repair for Industrial LiftsThe contract titled Electrical Systems Diagnostics & Repair for Industrial Lifts requires the contractor to perform comprehensive electrical diagnostics and repairs on electric-powered vehicle lifts used in industrial settings. This includes troubleshooting and servicing control panels, wiring systems, sensors, and power distribution components to ensure safe and reliable operation. The work must be carried out at the specified place of performance located at Potomska Street in New Bedford, Massachusetts, with a ZIP code of 02740. All tasks must meet industry standards for electrical safety and system integrity, and the contractor is expected to have the expertise to handle complex electrical systems specific to heavy-duty lift equipment. This subcontract opportunity was posted on July 28, 2026, and responses are due by August 25, 2026, at 10:00 PM Eastern Time. It is classified under NAICS code 811310, which corresponds to other commercial and industrial machinery and equipment repair and maintenance. The contracting entity is SCTM - South Coast Transit Management, operating under the Massachusetts agency structure, though no specific point of contact or set-aside details are provided. Bidders must ensure compliance with all technical and operational requirements outlined in the solicitation and be prepared to deliver timely, high-quality service to maintain the functionality of critical lift systems at the designated location.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Heavy-Duty Vehicle Lift Inspection & Maintenance ServicesThe contract requires comprehensive inspection, diagnostics, repair, adjustment, load testing, and final verification of Stertil-Koni electric heavy-duty transit bus lifts at two maintenance facilities located in New Bedford, Massachusetts, specifically at Potomska Street with a zip code of 02740. The work involves ensuring the full operational integrity and safety of these specialized lifts through detailed technical procedures, with an emphasis on precise calibration and performance validation to meet industrial standards. All services must be performed in accordance with manufacturer specifications and industry best practices to guarantee reliable and safe vehicle handling within transit operations. This subcontract under NAICS code 811490 is issued by South Coast Transit Management, part of the Massachusetts agency structure, and is open for responses until August 25, 2026. The contract does not specify any set-aside provisions and is not restricted by organization type, allowing qualified vendors to bid without geographic or size-based limitations. While no point of contact is listed, interested parties can access full solicitation details through the provided CommBuys portal link. The scope demands a high level of technical expertise in heavy-duty lift systems and requires adherence to strict safety and documentation protocols throughout the service lifecycle.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Supply of Replacement Parts and ConsumablesThe contract calls for the supply of OEM or approved aftermarket replacement parts and consumables specifically for in-ground hydraulic bus lifts, covering essential components such as seals, hoses, filters, hydraulic fluid, and safety-related items necessary for proper operation and compliance with safety standards. All supplied materials must meet or exceed manufacturer specifications to ensure reliability, durability, and safe performance in high-use transit environments. The scope is focused exclusively on maintenance and repair needs, with an emphasis on compatibility and long-term serviceability of the existing lift systems. The contract is issued under the procurement title “Supply of Replacement Parts and Consumables” by SCTM - South Coast Transit Management in Massachusetts, with performance required at Potomska Street in New Bedford, zip code 02740. It is classified as a subcontract under NAICS code 423830, indicating a commercial distribution or wholesale trade context. The solicitation was posted on July 28, 2026, and responses are due by August 25, 2026, at 10:00 PM Eastern Time. Interested parties must submit proposals through the designated commercial bidding portal before the deadline to be considered for award.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Structural and Safety System InspectionThe contract requires inspection and certification of structural components and safety systems for in-ground bus lifts to ensure compliance with ANSI and OSHA standards, with non-destructive testing performed as necessary to verify integrity and safety. All work must be carried out in accordance with recognized industry protocols to guarantee operational safety and regulatory adherence. The opportunity is classified as a subcontract under NAICS code 541370, issued by SCTM - South Coast Transit Management in Massachusetts, with performance location at Potomska Street in New Bedford, ZIP 02740. The solicitation was posted on July 28, 2026, and responses are due by August 25, 2026, at 10:00 PM. There is no set-aside designation specified, and no point of contact information is provided in the data.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Hydraulic Component Repair and ReplacementThe contract seeks qualified contractors to diagnose, repair, or replace defective hydraulic components such as cylinders, pumps, valves, hoses, and seals across facilities managed by South Coast Transit Management in New Bedford, Massachusetts. Work requirements include full system flushing, identification and repair of leaks, and precise pressure recalibration to ensure optimal hydraulic system performance. All services must be performed to industry-standard specifications and delivered on-site at the designated location on Potomska Street, New Bedford, with a zip code of 02740. The contract is categorized under NAICS code 811490 and is structured as a subcontract, with responses due by August 25, 2026, at 10:00 PM Eastern Time. The solicitation was posted on July 28, 2026, and no set-aside provisions or agency-specific set-aside descriptions are indicated.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Hydraulic Lift Inspection and Testing ServicesThe contract requires comprehensive inspection and functional testing of Ford Smith in-ground hydraulic bus lifts, with a focus on critical components including the hydraulic systems, structural integrity, safety locks, control systems, and pressure integrity. The work must be performed to verify the safe operational status of the lifts and to deliver detailed inspection reports documenting findings and compliance with technical and safety standards. All testing and evaluation must be conducted at the specified location on Potomska Street in New Bedford, Massachusetts, with zip code 02740. This subcontract, classified under NAICS code 811490, is issued by SCTM - South Coast Transit Management in Massachusetts and is open for response until August 25, 2026, at 10:00 PM. The solicitation does not specify a set-aside type or point of contact, and the performance obligation is strictly tied to the designated site. Contractors must ensure all procedures meet industry best practices and regulatory expectations for transit vehicle maintenance equipment, with a strong emphasis on reliability, safety verification, and accurate reporting.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Lift Inspection Contract

Solicitation # BD-27-2233-SCTM-SCTM-131797

The South Coast Transit Management in Massachusetts is seeking qualified providers to perform lift inspections under solicitation BD-27-2233-SCTM-SCTM-131797, which was posted on July 28, 2026, with a response deadline of August 25, 2026. The contract pertains to the inspection of lifts associated with transit equipment, and the work must be performed at Potomska Street in New Bedford, Massachusetts, 02740. The solicitation is issued by a state, local, or educational entity and is not subject to any specific set-aside classification. Casey Cabral serves as the primary point of contact for inquiries and submissions related to the bid. All proposals must be submitted through the official Commbuys portal prior to the stated deadline to be considered for award.

Building Inspection Services

POSTED

DEADLINE

In Ground Lift Inspection Contract

Solicitation # BD-27-2233-SCTM-SCTM-131799

Building Inspection Services

POSTED

DEADLINE

Logistics and Delivery ServicesThe contract involves the weekly transportation and delivery of clean uniforms to facilities in New Bedford and Fall River, with a corresponding pickup of soiled garments for laundering. Services are required to be performed consistently on a weekly basis to ensure continuous supply and cleanliness standards are met at both locations. The place of performance is specified at Potomska Street in New Bedford, with the understanding that operations will extend to the Fall River facility as well. This is a subcontract under the NAICS code 484220, which corresponds to special needs trucking, indicating the nature of the logistics involved is specialized and requires timely, reliable transit. The posting date is June 26, 2026, and proposals must be submitted by the deadline of August 21, 2026. The contract is managed by SCTM - South Coast Transit Management under the state of Massachusetts, but no specific point of contact or additional details about the organization structure or award criteria are provided.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 1 month ago

DEADLINE

Patch Manufacturing and Application ServicesThe contract requires the manufacturing and application of durable embroidered or heat-seal patches, specifically SRTA and ATU types, to be consistently and accurately placed on uniforms. Work must be performed to exacting standards ensuring uniformity in design, material quality, and placement across all issued garments. The patches must be built to withstand regular wear, washing, and environmental exposure while maintaining legibility and structural integrity. Production must meet precise specifications for sizing, color accuracy, and attachment method, whether through embroidery or heat-sealing, with strict adherence to placement guidelines to ensure compliance with operational and identification requirements. The contract is issued under the North American Industry Classification System code 339999 for other miscellaneous manufacturing and is classified as a subcontract under SCTM - South Coast Transit Management in Massachusetts. The place of performance is designated at Potomska Street in New Bedford, Massachusetts, with a zip code of 02740. The deadline for submission is August 21, 2026, and the solicitation was posted on June 26, 2026. All work must be completed in alignment with the agency’s operational standards, with no set-aside provisions specified and no point of contact details provided in the posting.

All Other Miscellaneous Manufacturing

POSTED

about 1 month ago

DEADLINE