Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONTROLLER-DISPLAY

Active
SPE4A7-26-T-588SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a Controller-Display item identified by NSN 5820-01-629-6503 and part number RWTT66, with a quantity of 46 units at a unit price of $46.00, totaling $2,116.00. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance. Inspection and acceptance occur at the origin, and the item is classified as a commercial item. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The packaging code U and container type E5 are mandated, and palletization must follow DLA packaging standards. Mercury and mercury-containing compounds are strictly prohibited in preservation, packaging, and marking unless explicitly exempted for functional uses such as specific batteries, lamps, or sensors under NAVSEA guidelines, with those exceptions requiring dual containment and shockproof design. Sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stated, with unspecified attributes treated as major. Attributes are to be assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Documentation for source approval is governed by RC001, and all requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The delivery address is the DLA Distribution facility in New Cumberland, PA, and transportation is subject to DLAD Proc Notes C19 and C20. The solicitation was issued on July 21, 2026, with responses due by July 29, 2026, under the NAICS code 334220, and the primary point of contact is Channon Dillard. The original required delivery date is December 22, 2026, with a needed ship date of January 17, 2027.

General Info

Procure 46 Controller-Display units NSN 5820-01-629-6503 at $46 each, FOB origin, zero tolerance, compliant with MIL-STD, no mercury, delivery by December 22, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
CHANNON DILLARD
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTROLLER-DISPLAY
CONTROLLER-DISPLAY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
UNIT ISSUE IS EACH
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
COSPOLICH INC. 66682 P/N RWTT66
SPE4A7-26-T-588S
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017571681 0001 EA 46.000
NSN/MATERIAL:5820016296503
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
SPE4A7-26-T-588S
SECTION B
PR: 7017571681 PRLI: 0001 CONT’D
US
Need Ship Date:01/17/2027 Original Required Delivery Date:12/22/2026
SPE4A7-26-T-588S NSN/Part Number: 5820-01-629-6503 Quantity: 46 EA Purchase Request: 7017571681QTY: 46 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
DIBBS
WAVEGUIDE ASSEMBLYThe contract is for the procurement of a single Waveguide Assembly with part number R17-3329 and NSN 5985-01-651-9165, manufactured by Microwave Engineering Corporation, under solicitation SPE7M0-26-T-015P. This is a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific compliance to revision E of reference drawing NR 1L4J7 684-8270004 dated 01/10/2018. The item must be produced using limited rights data accessible only to qualified vendors, and a classified drawing will be provided upon award following submission of a completed DD Form 254. The vendor must also achieve CMMC Level 2 self-assessment certification and comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special markings required. The unit of issue is EA, with a fixed quantity of one, and delivery must occur within five days at FOB origin, with inspection and acceptance also occurring at origin. Packaging and shipping must follow hazardous materials guidelines and use traceable freight methods—parcel post is prohibited. The delivery address is Tobyhanna Army Depot, with a required delivery date of July 21, 2026. The item is identified as a government-furnished property with specific tracking identifiers and is subject to cybersecurity and data protection mandates under covered defense information rules.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, CONNECTORThe contract is for three adapter connectors with NSN 5935-01-201-4810 under solicitation SPE7M5-26-T-338W, issued by the Department of Defense’s Active Devices Division. Delivery is required within 10 days of award, with a response deadline of August 3, 2026, and performance to occur at Fort Irwin, California, zip 92310-9986. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and DLA authorization may access the controlled data. The procurement is subject to DLA packaging requirements and mandates that the vendor hold CMMC Level 2 certification through a certified third-party assessment organization. The primary point of contact is Tate Shannon, reachable via email and phone listed in the contract data.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
SERVICE KITThis contract pertains to the procurement of a Service Kit under solicitation SPE7M0-26-T-015Y, with a single unit of item NSN 4940-01-687-7467, quantity one, to be delivered within five days from the required delivery date of July 20, 2026. Delivery is FOB origin, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special markings required. Palletization follows DLA’s packaging requirements, and all items must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The shipping and delivery address is the Carrier Outfitting Material Support Center in Suffolk, Virginia. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must receive prior approval unless explicitly permitted by specification. The contract incorporates all technical and quality requirements listed under R or I numbers from the DLA Master List, with the applicable revision determined by the solicitation issuance or award date. The unit of issue is EA, and the total price is based on a unit price of $1.00. Government-specific identifiers are included for tracking and logistics including RDD 777, project ZQ0 TP 1, and procurement request 7017552578. The primary point of contact is Audrey Acuna, with the contract issued under NAICS code 334220 by the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
MONITOR, TELEVISION
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
Federal
13M Fiber Transmitter Modules for the Fairbanks Command and Data Acquisition Station (FCDAS)The U.S. Department of Commerce, through NOAA’s Acquisition and Grants Office, is seeking two replacement Ortel SITU3013 Fiber Transmitter Modules for the Fairbanks Command and Data Acquisition Station in Alaska, under RFQ 1332KP26Q0051. This procurement is strictly limited to the brand-name Ortel product due to the station’s proprietary X-Band fiber optic infrastructure, which requires exact matching of the 1550 nm wavelength and optical output profiles to ensure seamless integration with existing telemetry systems without any modifications. Only Ortel modules will be accepted; alternative brands are non-compliant and will be rejected. The acquisition is conducted under FAR Part 12 using simplified procedures and is classified as a 100% Total Small Business Set-Aside under NAICS code 334220, with a small business size standard of 1,250 employees. All bids must be submitted by August 3, 2026, and performance is required at the Fairbanks site, with inquiries directed to Trang Tran at NOAA’s Silver Spring office.
Department Of Commerce Noaa

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
Federal
58--MONITOR,TELEVISION
DLA Aviation

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
SLED
Optical Splitter Module SupplyDfw International Airport is seeking suppliers to provide one thousand four optical splitter modules for the expansion of its fiber optic network. The solicitation is classified as a subcontract and is open for responses until July 23, 2026, with the opportunity posted on July 20, 2026. The NAICS code 334220 identifies this procurement within the telecommunications equipment manufacturing sector. All modules must meet technical specifications required for seamless integration into the airport’s existing infrastructure to support increased bandwidth and network reliability. Performance of the contract is expected to occur at DFW Airport in Texas, though specific delivery logistics and technical requirements are not detailed in the provided data. Bidders must ensure compliance with all contractual obligations, including timely delivery and adherence to industry standards for optical component performance.
Dfw International Airport

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334220
New
SLED
Classroom Interactive Displays SupplyThe contract titled Classroom Interactive Displays Supply seeks the procurement and delivery of interactive display units, including smart boards and touch-enabled screens, to support classroom instruction. It is issued as a subcontract under NAICS code 334220, which pertains to the manufacturing of computer and peripheral equipment, indicating the emphasis on technologically advanced, education-focused hardware. The opportunity was posted on July 20, 2026, with a response deadline of August 10, 2026, giving potential vendors approximately three weeks to submit proposals. The awarding entity is MPTAP, representing the Mississippi Department of Finance and Administration, and the place of performance is within the state of Mississippi, though specific locations are not detailed. This initiative aims to modernize educational environments by providing schools with up-to-date interactive technology to enhance teaching and learning outcomes.
MPTAP

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 334220
New
DIBBS
Supplier of Covered Defense Telecommunications Equipment MonitoringThe contract requires suppliers to ensure compliance with DFARS 252.204-7018 by implementing rigorous screening procedures to identify and exclude prohibited telecommunications equipment, such as devices sourced from Huawei or ZTE, within embedded systems supplied to the Department of Defense. This obligation applies to all subcontractors involved in the supply chain for defense-related components, mandating end-to-end verification to prevent the introduction of any covered equipment that poses a national security risk. Suppliers must establish documented processes to trace component origins, maintain audit trails, and provide attestations of compliance as part of contract fulfillment. The scope is tied to NAICS code 334220, indicating focus on electronic component manufacturing, and the contract is categorized as a subcontract under the Defense Logistics Agency. Performance is expected to align with Department of Defense security standards across all locations, with no specific geographical restrictions indicated. The solicitation, issued on July 20, 2026, is linked to contract SPE4AX25D0003 and delivery order SPE4AX25F2656, and participation requires adherence to federal cybersecurity and supply chain integrity regulations without exception. Noncompliance may result in contract termination or penalties under applicable defense acquisition rules.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334220
New
SLED
Supply of 1x4 Optical SplitterThe contract entails the supply of an OTCP-1X4-00-SA 1x4 optical splitter designed for use in fiber optic networks operating at 1310 nm and 1550 nm wavelengths, enabling the distribution of optical signals across network paths. The component is critical for passive optical network infrastructure and must meet technical specifications to ensure signal integrity and performance in telecommunications applications. The solicitation is issued as a subcontract under NAICS code 334220, which classifies it within the optical communication equipment manufacturing sector, and is managed by the DFW International Airport through its Texas-based entity. The opportunity was posted on July 20, 2026, with a firm response deadline of July 23, 2026, at 7:00 PM, leaving a narrow five-day window for interested parties to submit proposals. The place of performance and point of contact details are unspecified in the available data. Interested suppliers must respond through the designated online portal at the provided UI link, and while no set-aside status is designated, the contract is structured as a subcontract, suggesting procurement is being managed under a broader prime contract or program. All technical and delivery requirements are expected to align with industry standards for optical splitters in telecom environments.
Dfw International Airport

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334220
New
SLED
Supply of Fiber Optic TX Module (15dBm Output)The contract outlines the supply of a fiber optic TX module specifically designated as LP-OT-15-B-SA, capable of outputting 15dBm power across a frequency range of 48 to 1000 MHz and equipped with SC/APC connectors, intended for use in MATV fiber networks to convert electrical signals into optical signals. This subcontract is issued by DFW International Airport under the NAICS code 334220, which corresponds to the manufacturing of electronic components and related products, and is open for response until July 23, 2026 at 7:00 PM. The requirement is for the delivery of modules that meet precise technical specifications to ensure seamless integration into existing infrastructure supporting audio, video, and data transmission over fiber. There is no set-aside designation specified, and the place of performance and point of contact details are not provided in the available information.
Dfw International Airport

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334220
New
SLED
Supply of Fiber Optic Receiver Module (DOCSIS 3.1 Compatible)The contract calls for the supply of an OTPN-412C Fiber RX module designed for DOCSIS 3.1-8 compatibility, featuring SC/APC connectors, operating across the 40-1220 MHz frequency range, and supporting dual wavelengths of 1310 nm and 1550 nm with a minimum output level of +28 dBmV. The module is intended for fiber-optic signal reception in cable television and broadband networks and includes the OTPS-12A-F power supply to ensure proper operation. This subcontract is issued by Dallas Fort Worth International Airport under the NAICS code 334220, which pertains to the manufacturing of communication equipment. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, at 7:00 PM, indicating a tight turnaround for potential suppliers. The place of performance and point of contact details are not specified, but the procurement is hosted on Bonfire Hub under opportunity ID 243668.
Dfw International Airport

POSTED

1 day ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC SupportThe contract seeks subcontractor support to achieve and maintain cybersecurity compliance with NIST SP 800-171 standards and prepare for CMMC certification, specifically for entities handling controlled unclassified information. Services include developing and maintaining comprehensive System Security Plans, implementing required security controls, and completing SPRS attestation to demonstrate compliance posture. All activities must align with Department of Defense requirements and are targeted at ensuring readiness for third-party audits and contractual obligations under CMMC frameworks. The work is to be performed in support of the ASC SUPPLIER OPER AE AND AF DIV under the broader DoD acquisition structure. This subcontract opportunity is open for response until August 20, 2026, and is classified under NAICS code 541512 for computer systems design services. There is no set-aside designation specified, and performance location details are not provided, but the work is expected to support DoD supply chain security initiatives. Interested parties must navigate the DIBBS platform via the provided link to access full solicitation details and submit proposals ahead of the deadline. The contractor is expected to deliver documented, auditable processes and artifacts that validate ongoing compliance and readiness for CMMC level assessment.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation & Marking ServicesThe contract seeks subcontractor services for the military-compliant packaging, preservation, and labeling of viewer mounts in accordance with MIL-STD-129, MIL-STD-2073-1, and DLA RP001 standards, ensuring all requirements for defense logistics and shipment readiness are met. The work must adhere strictly to federal military specifications governing labeling, containerization, corrosion prevention, and documentation to support secure and traceable delivery across the defense supply chain. The solicitation is issued under NAICS code 493190 for other warehousing and storage and is classified as a subcontract, with a response deadline of August 20, 2026. The contracting activity originates from the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with performance expected to align with DoD logistics protocols. All submissions must comply with the technical and procedural mandates of the referenced military standards and be submitted via the DIBBS portal by the specified deadline.
Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & First Article Testing (FAT) ServicesThe contract seeks independent verification and documentation of First Article Testing compliance to ensure that production processes and initial samples meet specified technical and quality requirements. This includes comprehensive inspection planning, execution of sample testing according to approved procedures, and the generation of a formal First Article Test report that validates conformance to contract specifications. The work is critical for validating manufacturing readiness and ensuring consistency before full-scale production begins, with all activities requiring strict adherence to established quality assurance protocols. This is a subcontract under the NAICS code 541330, relating to engineering services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is open for responses until August 20, 2026, and performance will be carried out in alignment with defense-specific quality standards. While no specific location or set-aside details are provided, the nature of the work indicates a focus on supply chain assurance for defense-related components, requiring qualified vendors with demonstrated expertise in aerospace or defense manufacturing compliance and formal reporting processes.
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332994
New
DIBBS
Precision Machining of Viewer Mount ComponentsThe contract involves the manufacture of precision-turned metal components for a military viewer mount, requiring advanced CNC machining, surface finishing, and rigorous quality inspection adhering to MIL-STD-810G environmental testing standards and First Article Testing protocols. All work must meet exacting military specifications for durability, dimensional accuracy, and performance under extreme operational conditions. The subcontract is classified under NAICS code 332994 and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by August 20, 2026. The components are intended for critical defense applications where reliability and compliance are non-negotiable, and all produced parts must undergo documented inspection and certification before delivery.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 334290
New
DIBBS
COVER, ELECTRONIC COMMUThis contract is for the procurement of a cover for electronic communication equipment, identified by NSN 5895012703108 and part number 13075913-019, with a quantity of 10 units. The item is classified as a Critical Application Item and must comply with strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers in the document. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written approval from the Contracting Officer, though this restriction does not apply to commercial items or part-numbered-only components. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, wrapping, and unit containment, and all markings must follow MIL-STD-129 without special marking codes. The product must be palletized according to DLA packaging requirements and delivered FOB origin to the designated delivery point at the DLA Distribution New Cumberland Facility in Pennsylvania. Delivery is required within 171 days from the contract date, with an original required delivery date of November 28, 2026, and a needed ship date of January 17, 2027. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances during sampling, which must follow MIL-STD-1916 or a comparable zero-based sampling plan. Attributes are assigned verification levels and AQLs as specified, with unspecified attributes treated as major. The contract enforces strict configuration change management and prohibits deviations without formal engineering change proposals or variance requests. The unit of issue is each, with no permitted quantity variance. Transportation and shipping details are governed by DLA procedural notes, and all documentation references point to official DLA and DoD systems for compliance. The solicitation number is SPE4A7-26-T-587A, with a response deadline of July 29, 2026, and the contracting officer is Tamera Greene of the Department of Defense.
Other Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIALThis contract specifies the procurement of a dial indicating pressure gage identified by part number SG4ND1HPWRANAG and NSN 6685012983789, with a quantity of 61 units to be delivered FOB origin within 315 days. The item is classified as a commercial item and is designated as a critical application item, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date. Manufacturing and delivery must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special marking code 05 for delicate instrument handling, and palletization in accordance with DLA packaging guidelines. Unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at origin. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the item or its components, with exceptions permitted only for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise specified, and attributes are to be verified at predefined levels. Physical identification of the bare item must meet RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. The contract includes a CDRL, and all technical data must conform to referenced specifications including MIL-G-18997E and DI-DRPR-80651. The solicitation is a total small business set-aside under NAICS code 334519, with point of contact information provided for inquiries.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314910
New
DIBBS
PARTICLE SEPARATOR,The Contract involves the procurement of a single unit of a Particle Separator with NSN 1680-01-524-7206 under solicitation SPE4A7-26-T-584W, with a delivery deadline 171 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The supplier must comply with DLA packaging standards, tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and inspection and acceptance at origin. The item is exempt from Item Unique Identification per the Service customer’s request, and government identification must be removed from non-accepted supplies. Export control applies to associated technical data under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization, including to foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Covered defense information applies, and all documentation requirements for source approval requests must be met. The performance location is Jacksonville, FL, with inquiries directed to NYA Currie at the provided DLA contact details.
Textile Bag and Canvas Mills

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUGThe contract is for 556 units of the terminal lug part number PV10-8R-L manufactured by PANDUIT CORP. with CAGE code 06383, identified by NSN 5940-01-668-4714, under solicitation SPE4A7-26-T-586T. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise specified; critical, major, and minor attributes must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The product must be packaged in accordance with ASTM D3951 but subordinate to DLA’s stricter packaging rules, and all packaging must be marked and labeled per MIL-STD-129. Palletization must meet DLA’s RP001 packaging requirements, and the unit of issue is each (EA) with no tolerance for quantity variance. Delivery is FOB origin with an accepted delivery offset of 171 days, and the original required delivery date is February 17, 2027. All items are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with specific parcel post and freight shipping addresses provided. Inspection and acceptance occur at destination, and transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contract was solicited on July 21, 2026, with proposals due by July 29, 2026, under NAICS code 335931 for electrical equipment manufacturing.
Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER, SIGNAL DAThe contract pertains to the procurement of seven units of a Converter, Signal DA, with the NSN 5895-01-615-3408, under solicitation SPE4A7-26-T-585J, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is a total small business set-aside under NAICS code 334511, with responses due by July 29, 2026, and delivery required within 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions applied based on the acquisition type and revision dates in effect. The item involves controlled technical data subject to ITAR or EAR export regulations, prohibiting unauthorized disclosure or transfer to foreign persons, including foreign nationals in the U.S., and requiring compliance with DFARS 252.225-7048. Contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and be formally approved by DLA to access such data. Inspection and acceptance occur at the manufacturer’s origin, non-accepted supplies must have government identification removed, and additional tailored quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, PA, with Tamera Greene as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ARM, EMERGENCY ESCAPEThe contract pertains to the procurement of 20 units of an ARM, EMERGENCY ESCAPE item identified by NSN 1560-00-333-6710, with a delivery requirement of 171 days after award. Manufacturing must be accomplished via a forging process, necessitating specialized tooling, and sourcing inquiries for tooling, materials, or production support must be directed to designated DLA supply chain teams based on application domain—Aviation or Land & Maritime. The item is subject to stringent quality standards under SAE AS9100, along with specific packaging requirements per RP001 and strict compliance for measuring and test equipment under RT001. Documentation for source approval must adhere to RC001, and physical identification and bare item marking must comply with RQ017. The technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior government authorization, and only DLA contractors with approved JCP certification, completed training, and DLA authorization may access the data. Cybersecurity compliance at CMMC Level 2 is required through a certified third-party assessment organization under RD005. The solicitation number is SPE4A7-26-T-584L, with a response deadline of July 29, 2026, and the performance location is Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at the Defense Logistics Agency.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThe contract is for the procurement of two SPACER, RING units with NSN 5365-01-393-9408 under solicitation SPE4A7-26-T-587Y, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, physical identification and bare item marking, and adherence to tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging must conform to DLA standards, and the item falls under the Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements for third-party assessors. Covered defense information applies, and the place of performance is documented as Bremerton, Washington, with Tamera Greene as the primary point of contact.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThis contract pertains to the procurement of a spacer sleeve with part number 60-550-0247-1, supplied by Flowserve Corp under a Department of Defense solicitation numbered SPE4A7-26-T-586H. The item is classified as a critical application item and must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited in the material or its contact surfaces, except for specified functional uses such as batteries, fluorescent lamps, instrumentation, weapons systems, and chemical reagents as defined by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The contract specifies a quantity of 15 units with no variance allowed, to be delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery must align with the original required date of November 4, 2027, and the need ship date of January 17, 2027. The NSN for the item is 5365-01-280-6923, and it is procured under a simplified acquisition process governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. All shipments must comply with DLA’s transportation procedures outlined in DLAD Proc Notes C19 and C20.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details