CONVERTER, LIQUID OX

CONVERTER,LIQUID OX
CONVERTER,LIQUID OXYGEN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BACKPACK MEDICAL OXYGEN SYSTEM (BMOS); LOW PRESSURE, OVERALL LENGTH
17.500 INCHES OVERALL WIDTH 7.500 INCHES OVERALL HEIGHT 6.500
INCHES PORTABLE LIQUID OXYGEN STORAGE AND GASEOUS DELIVERY SYSTEM;
REQUIRES NO EXTERNAL POWER; USES 6 AA-BATTERIES FOR THE QUANTITY
INDICATOR; RUGGED; USER FRIENDLY; BUILT IN FLOW CONTROL VALVE; NO
EXTERNAL POWER REQUIRED; TESTED TO MIL-STD-810; MEETS MORE STRINGENT
WATER INGRESS REQUIREMENTS OF IEC 60601-1, IPX4 RATING; ALUMINUM HOUSING
TO ENCLOSE AND PROTECT THE CIRCUIT BOARD OF THE QUANTITY INDICATOR FOR
WATER INGRESS; CAPACITY : 2 LITERS; FULL WEIGHT: 19 LBS; EMPTY WEIGHT:
14 LBS; TOTAL GASEOUS VOLUME: 1720 LITERS; SYSTEM INTERNAL PRESSURE:
45-65 PSIG; LOX DELIVERY/OUTLET PRESSURE: 50 +/5 PSIG; OXYGEN GAS
DELIVERY RATE: 15 LPM; OPERATING TEMPERATURE: 32 TO 120 DEG F
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
This item requires Item Unique Identification (IUID) in accordance with
SPE4A7-26-T-594H
SECTION B
the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
ESSEX INDUSTRIES, INC. 19062 P/N 50C-0089-4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017522962 0001 EA 1.000
NSN/MATERIAL:3655016281034
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FY2945
FY2945 99TH MDG SGSM
CP 7026532834
5601 STAFFORD DR BLDG 1301
NELLIS AFB NV 89191
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FY2945
SPE4A7-26-T-594H
SECTION B
PR: 7017522962 PRLI: 0001 CONT’D
FY2945 99TH MDG SGSM
CP 7026532834
5601 STAFFORD DR BLDG 1301
NELLIS AFB NV 89191
US
M/F: (TCN) FM991161910677
RDD:
PROJ: TP 3
SUPP ADD: FY2945 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 15
DIC: A0A DIST: ADV: 2D FC: 6B
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE4A7-26-T-594H NSN/Part Number: 3655-01-628-1034 Quantity: 1 EA Purchase Request: 7017522962QTY: 1 Delivery: 20 days ADO