COOLER, OIL

COOLER,OIL
COOLER,OIL.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
JLG INDUSTRIES, INC. 1YHH8 P/N 8180315
HAYDEN INC 50184 P/N 016024
THERMAL TRANSFER COMPOSITES LLC 3QYG4 P/N DH-249-2-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018678233 0001 EA 17.000
NSN/MATERIAL:2520014538881
DELIVERY (IN DAYS):0080
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:B
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPE7L2-27-T-0022
SECTION B
PR: 7018678233 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ATTENTION: PRIOR HISTORY OF DAMAGE. PACKAGE REDESIGN REQUIRED:
CONTRACTOR SHALL VERIFY PACKAGE DESIGN IS ADEQUATE FOR DOD DELIEVERIES
IN ACCORDANCE WITH: (1) ASTM D4169, DISTRIBUTION CYCLE 18, ASSURANCE
LEVEL I, CRITERION 3 (see ANNEX for test criteria) TEST FOR MANUAL HANDLING; TEST REPORT SUBMITTAL REQUIRED.
1. PRODUCT'S OPENINGS SHALL BE CLOSED WITH NONCORROSIVE
PLASTIC PLUGS OR END CAPS TO ENSURE NO DEBRIS WILL
CONTAMINATE PRODUCT FLOW WHEN IN OPERATION.
2. WRAP ONLY OIL COOLER'S GRILL WITH SPECIFIED WRAPPING
MATERIAL<(>,<)> AND SECURE WITH TAPE. DO NOT APPLY ANY TAPE
TO DIRECTLY TO PRODUCT.
3. CUSHIONING MATERIAL IS CODE JC (DIE-CUT) AND SHALL
BE FABRICATED FROM WEATHER-RESISTANT CORRUGATED
FIBERBOARD AND SHALL IMMOBILIZE AND PROTECT PRODUCT
FROM DAMAGE. CONSTRUCTION OF CUSHIONING SYSTEM SHALL
ENSURE ADEQUATE PROTECTION FROM SIDE IMPACTS.
CUSHIONING SYSTEM SHALL CONSISTS OF TWO (2) DIE-CUTS AND
ONE (1) FIBERBOARD SLEEVE AS FOLLOWS:
(1) EACH DIE-CUT SHALL BE PLACED ONLY ON TOP AND BOTTOM
TUBING. EACH DIE-CUT SHALL BE THE ACTUAL SHAPE OF THE
TUBING WITH 1-1/2 INCHES (GREATER THAN LARGEST WIDTH
OF PRODUCT) OF WEATHER-RESITANT CORRUGATED FIBERBOARD
ON ALL THREE SIDES THAT MAKE CONTACT WITH THE CONTAINER.
THESE DIE-CUTS WILL SUSPEND PRODUCT AWAY FROM ALL
CONTAINER SURFACES. DIE-CUTS SHALL NOT MAKE CONTACT
WITH GRILL AREA. DIE-CUT CONSTRUCTION SHALL NEST OIL
COOLER TUBING SECURELY WITHIN ITS CONSTRUCTION. DESIGN
SHALL BE FOR LONG TERM STORAGE.
(2) ONE FIBERBOARD SLEEVE SHALL BE PLACED AROUND WRAPPED
OIL COOLER GRILL AREA ONLY, AND SECURE SLEEVE WITH TAPE.
ATTENTION: SLEEVE MUST HAVE PERFORATIONS TO BEND CORNERS
OF WEATHER-RESISTANT FIBERBOARD PRECISELY AROUND GRILL
FOR SNUG-FIT. SLEEVE CAN BE ONE SHEET WITH PERFORATIONS.
SLEEVE IS REQUIRED FOR ADDITIONAL PROTECTION FROM SIDE IMPACTS AND
ENSURE GRILL IS NOT DAMAGED.
(3) CODE: Z = CUSHIONING MATERIAL THICKNESS: DIE-CUT THICKNESS
IS DEPENDENT ON MATERIAL TYPE, CORRUGATED FLUTES, WALL TYPE,
CONSTRUCTION OF DIE-CUT, AND PRODUCT WEIGHT.
ATTENTION: THE MATERIAL SELECTED FOR DIE-CUTS AND THE DESIGN AND
APPLICATION OF THE DIE-CUT METHOD SHALL BE COMPATIBLE WITH THE LOAD TO
BE SUPPORTED AND THE SIZE<(>,<)> SHAPE, AND STRENGTH OF BEARING AREAS OF
THE ITEM.
4. THE SPECIFIED UNIT CONTAINER SHALL BE WEATHER-RESISTANT
CORRUGATED FIBERBOARD. MIL-STD-129 IDENTIFICATION MARKINGS
AND SPECIAL MARKING (ORIENTATION AND HANDLING) REQUIREMENTS
SHALL BE APPLIED TO EACH UNIT CONTAINER.
5. PACKAGE DESIGN VALIDATION PROVISIONS PER MIL-STD-2073-1D,
SPE7L2-27-T-0022
SECTION B
PR: 7018678233 PRLI: 0001 CONT’D
PARAGRAPH 5.6 AND GENERAL REQUIREMENTS FOR PACKAGE DESIGNS
AND PERFORMANCE PER MIL-STD-2073-1D, PARAGRAPH 5.2.3 (a-j) AS APPLICABLE TO PRODUCT. PACKAGE DESIGN SHALL PROMOTE SAFE DELIVERY AS A PERFORMANCE CRITERIA.
6. SPECIAL MARKINGS SHALL BE IN ACCORDANCE WITH MIL-STD-129 AND
ASTM D5445 (PICTORIAL MARKINGS FOR HANDLING GOODS) TO ENSURE
SAFE DELIVERIES.
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
MUST HANDLE, TRANSPORT, AND STORE UPRIGHT.
.
HAZARDOUS MATERIAL STATUS SHALL BE DETERMINED
BY MANUFACTURER AND PROVIDED TO DLA LAND AND
MARITIME PRIOR TO CONTRACT AWARD:
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/12/2027 Original Required Delivery Date:03/18/2027
SPE7L2-27-T-0022 NSN/Part Number: 2520-01-453-8881 Quantity: 17 EA Purchase Request: 7018678233QTY: 17 Delivery: 80 days ADO