Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Cooling System Pump Supply and Delivery

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply, packaging, and delivery of three cooling system pumps identified by NSN 2930016634578 to Fort Stewart, Georgia, with strict adherence to Defense Logistics Agency technical specifications, labeling standards, and shipping protocols. All units must meet DLA’s mandatory compliance requirements to ensure interoperability and readiness within military systems. The work is classified as a subcontract under NAICS code 333611, indicating it falls within the manufacturing sector for heating, refrigeration, and air conditioning equipment. The contract was posted on July 20, 2026, and is managed by the Department of Defense through the Defense Logistics Agency, with performance localized to Fort Stewart, GA, and full compliance with federal procurement and logistical guidelines expected throughout execution.

General Info

Supply three DLA-compliant cooling pumps to Fort Stewart, GA, under NAICS 333611, per military shipping and technical specs.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply, packaging, and delivery of 3 units of cooling system pumps (NSN 2930016634578) to Fort Stewart, GA, compliant with DLA technical, labeling, and shipping requirements.

Similar Contracts

Same NAICS industry code

SLEEVE, HOUSING, AIR INL

AVIATION SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

VANE ASSY, COMPR, 7TH

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

Booster Pump Housing Repair & Pump InspectionThe contract pertains to the repair of an existing booster pump housing and a comprehensive inspection of the pump to assess wear and operational integrity. The work is critical to ensuring the continued functionality and safety of the system, requiring skilled evaluation and restoration of compromised components. All repairs must meet industry standards for durability and performance, and the inspection must document the condition of internal and external parts to identify potential failure points or necessary future maintenance. The opportunity is posted as a subcontract under NAICS code 333611, which relates to pump and pumping equipment manufacturing, and is open for responses until August 6, 2026. The contracting entity is listed as Utah, with the opportunity hosted on the Utah Bonfire Hub platform. There is no specified set-aside status, and the place of performance and point of contact details are not provided, indicating that location and direct communication may be coordinated upon award. Interested parties must submit proposals by the deadline to be considered for execution of the repair and inspection services.

POSTED

DEADLINE

Centrifugal Pump Impeller SupplyThe contract involves the supply of four centrifugal pump impellers identified by NSN 4320012591587, requiring full adherence to military specifications for packaging, preservation, labeling, and delivery. All components must meet rigorous defense standards to ensure operational readiness and compatibility within military fluid handling systems. The work is to be performed in Tracy, California, with a delivery deadline tied to the government’s operational timeline, and the procurement is structured as a subcontract under NAICS code 333611 for pump and pumping equipment manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under the Department of Defense’s Fluid Handling Division. Though no specific set-aside classification is indicated, the contract is open to qualified subcontractors capable of meeting stringent military logistics and quality control requirements. The place of performance is firmly established at the Tracy facility with a zip code of 95304-5000, and all deliverables must be coordinated through the official DIBBS portal linked in the documentation.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Fuel Pump Supply – Electrical TypeThe contract entails the supply and delivery of a single defense-grade electrical fuel pump, identified by NSN 2910015776952 and MPN RE509033, to a U.S. military installation in Jordan. The item is procured under a DPAS-rated priority, ensuring elevated urgency and allocation of resources consistent with national defense requirements. The contract is classified as a subcontract under the NAICS code 333611, which pertains to engine, turbine, and power transmission equipment manufacturing, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The award was posted on July 20, 2026, and the place of performance is designated in Jordan, though specific location details are not provided. The contractual vehicle is linked to the DIBBS system under award SPE7LX22D0068 with delivery identifier SPE7L126FAV0C and contract number 53251, indicating formalized tracking and fulfillment under DLA’s supply chain protocols.

Defense Logistics Agency

POSTED

DEADLINE

Centrifugal Pump Supply and DeliveryThe contract encompasses the supply and delivery of ISOTTA FRASCHINI centrifugal pumps identified by NSN 4320151004675 under an Indefinite Delivery Indefinite Quantity agreement, utilizing tiered pricing structures that adjust based on the volume of orders placed. This subcontract is managed by the Defense Logistics Agency under the Department of Defense and falls under NAICS code 333611, which corresponds to the manufacturing of industrial and commercial HVAC and refrigeration equipment, reflecting the specialized nature of the pumps. The contract remains active with a posted date of July 20, 2026, and performance locations are not specified, indicating a flexible delivery network aligned with defense logistics requirements. Pricing is structured to incentivize higher-volume procurement while maintaining consistent product quality and compliance with military specifications.

Defense Logistics Agency

POSTED

DEADLINE

DUCT, EXHAUST, NONAIRThe contract specifies the procurement of a DUCT, EXHAUST, NONAIR item with NSN 2835017328672 and part number 23069867, quantity of four units, to be delivered FOB origin within 393 days of contract award, with no tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied. Packaging and palletization must adhere to DLA’s procurement guidelines, and delivery is directed to the designated receiving warehouse in Tracy, California. Inspection and acceptance occur at the destination. The contract incorporates technical and quality requirements from the DLA Master List, including sampling procedures based on MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and the item is not subject to Item Unique Identification per customer request. The material has no shelf life constraint. The unit of issue is each, with a unit price of $4.00, totaling $16.00. The contract is governed under solicitation SPE4A5-26-T-296E, issued by the Department of Defense, with Caroline Simpson as the primary point of contact, and was solicited with a response deadline in July 2026 for delivery scheduled in August 2027.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

28--DUCT,EXHAUST,NONAIRThe contract seeks to procure four exhaust ducts, nonair, under NSN 2835017328672, with delivery required to W1A8 DLA DIST SAN JOAQUIN within 393 days after order placement. The approved source for this item is listed as 63005 23069867, and submissions must be made electronically through the solicitation portal; hard copies are not available and no specifications, plans, or drawings are provided. This is a combined solicitation with the number SPE4A526T296E, posted on July 20, 2026, and responses are due by July 28, 2026. All responsible sources may submit quotes, and there is no set-aside designation. The NAICS code is 333611, and the procuring agency is DLA Aviation under the Department of Defense, with the office located in Richmond, Virginia. Questions must be directed via email to the point of contact listed in the solicitation, with additional guidance available through the DIBBS website using the solicitation number.

POSTED

DEADLINE

BEARING ASSEMBLY,JOThe contract pertains to the procurement of the BEARING ASSEMBLY, JO under solicitation SPRMM1-26-Q-MF07, issued by SPRMM1 DLA Mechanicsburg on behalf of the Department of Defense. The requirement specifies the manufacture and delivery of 20 units, with a firm fixed-price structure and delivery due by June 26, 2026, under FOB destination terms to the specified delivery point. Technical compliance is governed by the NSN 7HH 2825-00-296-0690 PP and associated reference part numbers 90099 715J759A01 and 90099 715J759G01, with mandatory adherence to MIL-STD-130 Rev N for item marking and MIL-STD-2073 for packaging, including specific packing levels (A and B) based on shipment type, and MIL-STD-129 for labeling with full Procurement Instrument Identifier, Contract Line Item Number, and SubCLIN details. The product must meet strict quality standards, with the contractor responsible for all inspection activities throughout production, and records of all inspections required to be maintained for 365 days post-delivery. The government retains the right to inspect at any time, and the inspection and acceptance occur at the contractor’s facility under DLA Procurement Note E06. Award will be made using the Lowest Price Technically Acceptable (LPTA) evaluation method under DFARS 215.101-2-70(a)(1)(i), requiring strict compliance with all solicitation requirements as pass/fail criteria. Offerors must verify current SAM registration with accurate representations and certifications, and if not the original manufacturer, must disclose the OEM, CAGE code, and part number. Electronic submission of quotations via EDI is permitted but requires full disclosure of any deviations from solicitation terms; otherwise, awards will be made based solely on the stated requirements. All contractual documents are considered issued upon electronic transmission, and compliance with cybersecurity regulations including NIST SP 800-171 and FedRAMP Moderate baseline is mandatory for handling Controlled Unclassified Information. Invoicing and receiving reports must be submitted electronically through WAWF using the COMBO format, with payment and administrative functions routed via DoDAAC SPRMM1. Contractors are required to register for EDA to

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Manufacturing of V-Bank Coupling (Industrial Machinery)The contract entails the full manufacturing of 51 units of V-Bank Coupling, encompassing all stages from raw material procurement to final assembly and quality assurance, with strict adherence to defense technical standards. The work must be executed in compliance with militarized specifications, ensuring the product meets the rigorous performance and durability requirements mandated by the Department of Defense. All manufacturing processes, including machining and inspection, are to be carried out to guarantee conformance to defense-grade engineering and safety protocols. The contract is classified as a subcontract under NAICS code 333611, with the place of performance designated at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, managed by the ASC Commodities Division within the Department of Defense. Although no specific set-aside or organizational type is designated, the procurement is structured to support defense industrial capabilities and requires full accountability in supply chain sourcing and production control to meet operational readiness standards.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

COUPLING, V-BANKThis contract pertains to the procurement of a V-BANK coupling, identified by NSN 2835-01-381-2702 and part number VC1508A-700-A, with a requirement for 51 units to be delivered FOB origin within 373 days of contract award. The item is source controlled and must be manufactured and tested in accordance with limited rights data that only qualified vendors with access to or traceability to approved sources may utilize. Strict compliance with DLA’s Master List of Technical and Quality Requirements governs all technical, quality, and packaging standards, superseding any other references such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 guidelines, with palletization and labeling conforming to DLA specifications. Inspection and acceptance occur at the destination, with zero non-conformances required in sampling unless otherwise stated, using MIL-STD-1916 or comparable zero-based sampling plans. Attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, or AQLs of 0.1, 1.0, and 4.0. The vendor must comply with RQ006, RT001, and RQ042 requirements for quality conformance, measuring equipment calibration, and ISO 9001:2015-based quality systems. A Certificate of Quality Compliance and CDRL-COQC are mandatory, and a Source Approval Request (SAR) package is required if the vendor is seeking approval. Delivery is to be made to Robins Air Force Base, Georgia, with a required ship date of August 5, 2027, and no quantity variance is permitted. The contract is under solicitation SPE4A6-26-T-07TG, with point of contact Ashley Jones, and falls under NAICS code 333611 for industrial machinery manufacturing.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

VANE ASSY, COMPR 5THThe contract pertains to the procurement of two units of a Vane Assembly, Compressor 5th, identified by NSN 2835-00-555-7633 and associated Rolls-Royce part numbers 23079560 and 6876105, under solicitation SPE4A5-26-T-294D. The delivery is fixed at five days after receipt of order, with FOB Origin terms meaning title and risk transfer upon tender at the contractor’s facility, and acceptance occurs at the same point. The total contracted value is $4.00, with no option quantities or price adjustments allowed. Deliveries must be routed to the General Depot of Naval Supplies in Kaohsiung, Taiwan, and packaging must strictly adhere to MIL-STD-2073-1E with preservation method 10 (cleaning and drying), unit container E5, and packing level B, all within the framework of DLA Packaging Requirements RP001. Marking must follow MIL-STD-129, incorporating barcoding and government identifiers, and critical items require direct bare part marking per RQ017, with no special external marking needed beyond standard requirements. Quality assurance is governed by zero-based sampling per MIL-STD-1916 or ASQ H1331 Table 1, with acceptance requiring zero non-conformances unless otherwise specified, and attributes are classified with strict AQLs: critical at 0.1 (Verification Level VII), major at 1.0 (Level IV), and minor at 4.0 (Level II). The item is designated a critical application, necessitating compliance with all technical and quality requirements listed in the DLA Master List, accessible via the provided portal. Cybersecurity protocols under NIST SP 800-171 and DFARS 252.204-7012 mandate safeguarding covered defense information, with mandatory cyber incident reporting within 72 hours. Contractors must comply with anti-trafficking, employment eligibility, hazardous materials labeling per 29 CFR 1910.1200, and prohibition on telecommunications equipment from designated foreign entities. All invoicing is exclusively via WAWF, and small business representations, including UEI and CAGE codes, must be current in SAM.gov. The solicitation is structured under a fixed-price arrangement with no trade-off evaluation noted

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

CAP, AIRThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3638, pertains to the procurement of one unit of material identified by NSN 3433-01-158-0436, with a required delivery within five days of award. The item is to be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including specific hazardous material handling per FED-STD-313 and TQ requirement IP025 if applicable. Mercury and mercury-containing compounds are strictly prohibited except for defined functional uses such as batteries, fluorescent lights, sensors, or reagents approved by NAVSEA, with additional containment requirements for portable devices. The shipment is to be sent to a designated SSA location in Kaiserslautern, Germany, with transportation governed by DLA procedural notes C19 and C20. The contract includes restrictions on covered defense information and mandates compliance with supplier documentation standards including Source Approval Requests and removal of government identification from non-accepted items. The original required delivery date is June 11, 2025, and the point of contact is Ira Hedgepeth at DLA.

Welding and Soldering Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

HEATER, FLUID, INDUSTThis contract is for the procurement of one fluid heater, industrial model, identified by NSN 4420014299920 and part number 5-131-08-030-002 from Fluid Handling LLC, with a total quantity of ten units to be delivered within five days of award. The item is covered under solicitation SPE8E8-26-T-4771, which is a total small business set-aside under NAICS code 332410, and is managed by the Defense Logistics Agency. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all packaging must be marked and labeled appropriately with the specified unit of issue and quantity per unit pack. The contract explicitly prohibits intentional addition of mercury or mercury-containing compounds to the hardware or its components, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and maintain a secondary containment barrier per NAVSEA 5100-003D. Shipment is directed to the U.S. Army SSA W58MKR facility in Zaczernie, Poland, and must follow DLA procedures C19 and C20 for transportation and first destination transfer. The item must be delivered by July 22, 2026, and is associated with RDD code E and project code 3BI TP 1. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Contract data indicates the primary point of contact is Alexis Selby, with the solicitation posted on July 21, 2026, and responses due by August 3, 2026. The purchase request number 7017559823 references this line item, with unit price and total cost not itemized but implied through total quantity and contractual obligations. Government use identifiers and distribution codes are provided for internal tracking purposes.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 13 hours ago

DEADLINE

PLATE, INSTRUCTIONThe contract pertains to the procurement of two instructional plates identified by NSN 9905-01-515-8353 under solicitation SPE8E6-26-Q-0579, with a firm delivery deadline of 90 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Drawings associated with this item are accessible only during the open solicitation period via the DIBBS portal. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless otherwise directed. Compliance with zero defect acceptance is mandatory unless explicitly waived. Technical data associated with this item is subject to export control under ITAR or EAR, and its disclosure to foreign persons, including within the United States, is strictly prohibited without prior authorization. Access to controlled technical data is restricted to contractors with valid US/Canada Joint Certification Program certification, completed DOD export control training, and explicit approval from DLA. The point of contact for the solicitation is Kathleen Selover, reachable via email and phone listed in the contract data.

Plate Work Manufacturing

POSTED

about 13 hours ago

DEADLINE

MARKER, IDENTIFICATIONThe contract pertains to the procurement of identification markers, specifically for a Type I shelf-life item with a 12-month non-extendable shelf life, under the Defense Logistics Agency’s procurement requirements. The item must be supplied by either LABELMASTER CO. or AMERICAN LABELMARK COMPANY with the respective part numbers PL-18 or HML13, and must comply with MIL-STD-129 for labeling, including shelf-life markings in calendar quarter and year format, with the expiration date set exactly one year from the cure date. At least 85% of the item’s shelf life must remain at the time of delivery. Packaging must conform to MIL-STD-2073-1E, with clear marking specifications and avoidance of plastic materials for wrapping, cushioning, or dunnage whenever feasible. The unit of issue is RO (1,666 feet), with a total quantity of one RO required, and delivery is due within 20 days of contract award, FOB origin. Inspection and acceptance occur at destination, and no variance in quantity is permitted. The item is destined for W8002F, a military facility located in Comayagua, Honduras, and must be shipped via traceable means, with parcel post prohibited. The delivery address, mark for address, and freight shipping address are identical, and the point of contact is Jennifer Roome of the Defense Logistics Agency. The solicitation number is SPE8E6-26-T-3765, with an original required delivery date of July 17, 2026, and responses are due by August 3, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, and compliance with all applicable codes and standards including MIL-STD-129 is mandatory. The contract includes government use codes, project information, and a National Stock Number of 7690-01-242-4556, with the North American Industry Classification System code 323117 identifying the industry standard for the item.

POSTED

about 13 hours ago

DEADLINE

TANK, OIL DRAIN, COMPThe contract is for one oil drain tank, part number 366-20263 and NSN 4130-01-230-8549, under solicitation SPE8E8-26-T-4770, issued by the Defense Logistics Agency. Delivery is required within five days of award, with shipment destined for the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item must be furnished FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, with strict instructions to avoid plastics where possible. The item must not contain intentional mercury or mercury compounds except in specific permitted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents, and any portable mercury-containing devices must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation or award date. A unique shipment identifier RDD 777 requires tracking via the fastest traceable means and prohibits parcel post. The technical data package is not approved by DLA Troop Support, and no request for it should be submitted. The contract includes specific freight and parcel post addresses, a government-only identification code, and a required delivery date of July 20, 2026, with a response deadline of August 3, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

BRACKET, LIGHT RETENThe contract pertains to the procurement of 40 units and 140 units of a light retention bracket, identified by NSN 6220-01-631-4413 and part number 2614833C1, under solicitation SPE8E7-26-T-3370. Delivery is required within five days of shipment, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, with all packaging and labeling strictly governed by MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements, and each unit pack must contain exactly one item. The items are to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD E and referenced DLA procedural notes. The first delivery is due by July 21, 2026, and the second by July 22, 2026, with unit prices of $40.00 and $140.00 respectively, totaling $2,000 and $19,600. The contract references mandatory technical and quality standards from the DLA Master List accessible online, and all documentation and unit of issue compliance must align with DoD standards as defined in official DLA resources.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

DECONTAMINATING APPThis contract is for the procurement of one unit of a decontaminating apparatus identified by NSN 4230-01-593-2297 and part number T00416-5083, classified as a commercial item with a non-extendable shelf life of 12 months as a Type I (Code H) item. The item must comply with strict material restrictions including the absolute prohibition of asbestos per FED-STD-313 and the intentional exclusion of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and certain chemical reagents defined by NAVSEA, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The item is designated as a critical application item and must be packaged in compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, including the special marking code 32 for shelf life, with palletization adhering to DLA packaging requirements. Delivery is required FOB origin within 20 days of contract award, with zero tolerance for quantity variance, inspection and acceptance occurring at the destination. The item must be delivered to the Distribution Management Office at Building 1710, Iwakuni, Japan, under contract SPE8E6-26-T-3774, with the original required delivery date set for July 17, 2026. Compliance with DLA’s Master List of Technical and Quality Requirements, including specific references such as RP001, RQ011, RD003, and RC001, is mandatory, along with adherence to all documentation and source approval protocols. Transportation is governed by DLAD procedural notes C19 and C20, and all markings, packaging, and unit of issue must conform to specified DoD and ANSI X12 standards. The contract is managed under a federal procurement system with government-only access details and is part of a larger expeditionary system requirement supported by HDT Expeditionary Systems Inc.

Plate Work Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY, STORAGEThis contract specifies the procurement of six calcium maintenance-free shelf-life Type I batteries with a non-extendable 12-month shelf life, supplied by East Penn Manufacturing Co. under part number 11U1L and NSN 6140017178541. The batteries must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including MIL-STD-129 marking and palletization standards. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned verification levels or AQLs as defined. Mercury or mercury-containing compounds are strictly prohibited except in functional applications like batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents. The items will be delivered FOB destination within 20 days of contract award to Camp Pendleton, California, with no quantity variance allowed and inspection and acceptance also occurring at destination. Shipment must use traceable freight methods, not parcel post, and special marking codes are not required. The contract is issued under solicitation SPE7L7-26-T-4391 with a required delivery date of July 13, 2026, and response deadline August 3, 2026, under NAICS code 335910 and managed by the Defense Logistics Agency.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

INNER TUBE, PNEUMATIThis contract is for the procurement of four pneumatic inner tubes, part number 323111, with NSN 2610-01-611-7825, supplied by Carlisle Tire & Wheel Co under solicitation SPE7L7-26-T-4385. The item is classified as TYPE I with a non-extendable 60-month shelf life, and the use of any Class I ozone-depleting chemicals is strictly prohibited, requiring approved substitutes if necessary. Delivery is required within 20 days to Ellsworth Air Force Base, South Dakota, FOB destination, with inspection and acceptance occurring upon arrival and no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special marking indicating Type I shelf-life status, and palletization adhering to DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with zero non-conformances required unless otherwise specified. The contract references DLA’s Master List of Technical and Quality Requirements for all applicable technical and quality standards. Shipment must be sent via the fastest traceable means, excluding parcel post, and all documentation aligns with DoD unit of issue and procurement protocols. The original required delivery date is July 17, 2026, and the point of contact is Molly Teegarden of the Defense Logistics Agency.

Tire Manufacturing (except Retreading)

POSTED

about 13 hours ago

DEADLINE

BATTERY POWER SUPPLYThis contract specifies the procurement of a sealed lead acid battery with a Type I shelf life of 12 months, non-extendable, classified as a commercial off-the-shelf item with available catalog data for evaluation of alternatives. The battery must comply with strict hazardous material regulations, prohibiting intentional addition or direct contact of mercury or mercury-containing compounds, except for functional use in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a second boundary of containment as defined by NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. Packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating Type I shelf life, and palletization governed by DLA packaging requirements. The item is to be delivered FOB origin within 10 days, with no quantity variance allowed, inspected and accepted at destination. Shipment must use the fastest traceable means, excluding parcel post, to the designated military address in Carlisle, PA, with no delivery date earlier than July 10, 2026. The contract is issued under solicitation SPE7L7-26-T-4383 by the Defense Logistics Agency and identifies the NSN 6130-01-418-5230 for a single unit at a total price of one dollar.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

FLOODLIGHT, ELECTRICThe contract is for the procurement of 10 electric floodlights with NSN 6230-01-717-5158, sourced from BAYCO PRODUCTS INCORPORATED DBA 3GLY4 under part number NSR-2166R. Delivery is required within 20 days of contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s mandatory packaging requirements, specifically RP001 and MIL-STD-129, superseding ASTM D3951 if applicable. Hazardous material handling follows FED-STD-313 and TQ requirement IP025 if applicable. Items must be shipped via traceable means, excluding parcel post, to the specified delivery point at 7105 NW 70th Ave, Johnston IA 50131-1824, with clear labeling per government directives including traceable markings and the designated military freight code. The product must meet all technical and quality standards enumerated in the DLA Master List of Technical and Quality Requirements, referenced in the solicitation, and documentation requirements for source approval are integral to compliance. The solicitation number is SPE8E7-26-T-3368, with a response deadline of August 3, 2026, and the original required delivery date is July 17, 2026. Contract administration is managed by the Defense Logistics Agency, with Kelly Mitchell as the primary point of contact.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY, STORAGEThe contract specifies the procurement of 6140-01-457-4206, a 12-volt wet-charged lead acid battery classified as corrosive by the Department of Transportation and shipped under the name "Battery, Wet, Filled with Acid." It is a Type I shelf-life item with a strict non-extendable 3-month shelf life, requiring packaging and marking in compliance with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life designation. All shipments must adhere to DLA packaging requirements RP001 and hazardous materials packaging standard IP025, using only U.S. Department of Transportation-compliant 4G UN-certified fiberboard containers; commercial packaging is strictly prohibited. The contractor must ensure staff are trained and certified per Title 49 CFR for handling, marking, labeling, and documenting hazardous materials, and must include valid Safety Data Sheets confirming regulatory compliance. The product must not contain intentionally added mercury except for functional uses in batteries, and portable fluorescent lamps or instruments containing mercury must have shockproof design and secondary containment per NAVSEA standards. The contract mandates a Firm Fixed Price structure with zero tolerance for quantity variance, delivery within 60 days after award, and inspection and acceptance occurring at the destination. Three separate deliveries of two batteries each are required, shipped to distinct U.S. military addresses in Pennsylvania and Puerto Rico, with shipments traceable and never via parcel post. Each delivery has an associated RDD and project code with unique routing identifiers, and the batteries are sourced from East Penn Manufacturing Co. under part number 7T31. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and verification levels for attributes are fixed as VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract explicitly excludes any non-compliant materials or packaging, enforcing full adherence to federal hazardous materials regulations and government-specific logistics protocols.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE