This Sources Sought opportunity from Department Of Defense was posted on May 30, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Coordinate Measuring Machines for Depot Level Maintenance on T408 Engine

Closed

N68335-24-RFI-0222Federal

Submission Closed06/14/2024, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333515

New

DIBBS

Supply of Airframe Ball Bearings (NSN 3110-00-269-4710)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0260

Solicitation SPE8E5-27-T-0260 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of 12 power hacksaw blades, specifically identified as CS UNITEC, INC 1N5G7 P/N Z22-7 HSS with NSN 3455-01-633-2840. The contract requires delivery within five days after receipt of order, with an original required delivery date of October 16, 2026. Shipping is FOB Origin, and the items are to be delivered to designated addresses in Virginia Beach, Virginia. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements and RP001 palletization standards taking precedence. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, such as the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System.

Defense Logistics Agency

POSTED

DEADLINE

WAFER BROACH HOLDING BAR

Solicitation # W519TC27QA022

The Army Contracting Command - Rock Island Arsenal (ACC-RIA) is soliciting a firm fixed price contract for the procurement of two Wafer Broach Holding Bars to support the Rock Island Arsenal - Joint Manufacturing and Technology Center. This is a total small business set-aside under NAICS code 333515, with a specific price evaluation preference for HUBZone small business concerns. The items must be manufactured in accordance with drawing 26C009 (12593208-104), and interested vendors must be registered with the Joint Certification Program to access these controlled drawings. Offers are due by October 27, 2026, at 10:30 AM, with a required delivery date of March 31, 2027. The contract is FOB Destination, with shipping and inspection handled by DoDAAC W52H1B in Rock Island, Illinois. Payments will be processed electronically through the Wide Area Workflow (WAWF) system via the Defense Finance and Accounting Service. The procurement is subject to the availability of funds and requires offerors to maintain current representations and certifications within the System for Award Management.

POSTED

DEADLINE

Manufacture and Supply of Spur Gears (NSN 3020001031406)This subcontract involves the manufacture and supply of eight spur gears under NSN 3020001031406 for the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires precision machining and grinding using CNC gear hobbing and shaping machinery, culminating in the delivery of the finished gears and a First Article Test report to validate quality standards. Performance will take place at Hill AFB, and the contractor must hold CMMC Level 2 certification to ensure the proper safeguarding of defense information. Interested parties must respond by October 29, 2026, to fulfill the requirements of this defense supply contract.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Casting Tooling and Mold FabricationThis subcontract involves the design, engineering, and fabrication of casting tooling and molds to support prime contractors on DLA Weapons Support ASC aviation projects. The scope of work requires the use of CNC milling, EDM, or 3D printing for mold patterns, with a specific requirement to adhere to design control activity specifications for the Snubber Guide Assembly. The final deliverables must be completed tooling and molds that are fully ready for the casting process. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the project is categorized under NAICS code 333515. Performance of the contract will take place in Beaufort, South Carolina. Interested parties must note the response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Gear Cluster Supply (NSN 3020011856504)This subcontract involves the supply of 2,000 Gear Cluster units, identified by NSN 3020011856504, to support prime contractors fulfilling Department of Defense requirements for the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for manufacturing or sourcing these components in accordance with FSC 3020 standards, utilizing either additive manufacturing or precision machining to ensure all DLA quality standards are met. The completed units must be packaged and shipped to the DLA Distribution center located in Cherry Point, North Carolina. This procurement falls under NAICS code 333515, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Bevel Gear Supply (NSN 3020013638104)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the provision of precision-manufactured bevel gears meeting NSN 3020013638104 technical specifications. The contractor is responsible for manufacturing or sourcing a minimum of 27 gears using CNC milling and gear cutting equipment, ensuring all units undergo quality control and inspection in accordance with Special Marking Code 24. The project is designated as a Total Small Business Set-Aside under NAICS code 333515. All deliverables must strictly adhere to MIL-STD-129, MIL-STD-2073-1E, and RP001 packaging and marking standards. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturer of Sleeve Bearings (NSN 3120-01-352-7809)This subcontract involves the manufacture and delivery of 17 precision-engineered sleeve bearings under NSN 3120-01-352-7809 for the DLA Weapons Support ASC Commodities Division. The project requires the use of precision machining equipment and strictly prohibits additive manufacturing. All materials used must be Berry Amendment compliant to meet Department of Defense standards. Qualified providers must hold either SAE AS9003 or ISO 9001 certification and maintain access to the US/Canada Joint Certification Program. The final deliverable consists of 17 fully inspected sleeve bearings to be performed in New Cumberland. The response deadline for this requirement is October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1365

Solicitation SPE4A5-27-T-1365 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 16 light lenses, identified by NSN 6220014699518. This item is designated as a Navy Identified Critical Safety Item. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 26, 2026. The procurement falls under NAICS code 333515 and requires compliance with the Buy American Act and the Berry Amendment. The contract specifies that inspection and acceptance will occur at the origin, with quality management systems required to comply with SAE AS9100 or AS9120 for distributors. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including a fragile marking code. Delivery is designated as FOB Origin under the First Destination Transportation program, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. Invoicing and payment must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Zoller Power Shrink 600

Solicitation # RFQ509170

The Department of Energy, through the Oak Ridge National Laboratory, is soliciting firm fixed price quotations for the procurement of one Zoller Power Shrink 600 inductive high-end heat-shrink system or a domestic equivalent. This system is designed for HM and HSS tools with diameters from 3 mm to 32 mm and a maximum shrinkable tool length of 600 mm. The procurement includes a 12.5 inch TFT color monitor with pilot operating software, an ergonomic machine table, a 14/22kVA induction heat-shrink system, a liteSet length adjustment system, and a toolEx unclamping fixture. Additional requirements include a 480 V 3-/PE mains adaptor, shielding disc sets, and digital user manuals. Award will be based on the lowest priced, technically acceptable proposal. Offerors must provide a firm fixed price quotation and a proposed delivery schedule. Technical compliance requires that shrink fit chucks adhere to the DIN 69882-8 standard and that electrical equipment be NRTL listed or field evaluated by an OSHA recognized laboratory. The contract incorporates various federal regulations, including Buy American preferences, NIST SP 800-171 cybersecurity standards, and DOE-STD-1090-2020 for hoisting and rigging. Payments are processed via electronic funds transfer with net 30 day terms. All responses must be submitted by the deadline of October 28, 2026.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

HYTORC Torque Wrench kit

Solicitation # W519TC27QA020

Solicitation W519TC27QA020 is a sole-source, firm-fixed-price action restricted to HYTORC (CAGE: 2J479, UEI: HUMCGHH8MG83) for the procurement of one HYTORC Torque Wrench kit. This equipment is intended to support the FRS M7A1 Project and will supplement existing tooling at JMTC. The comprehensive kit includes various specialized components such as Lightning Smart Battery pumps, low clearance power heads, bolting machines, ratchet links, reaction pads, safety handles, cases, steel twinline hose assemblies, and five HY-CARE standard plans. The award will be granted to the lowest priced, responsive, and responsible vendor whose quote conforms to the requirements, with discussions not anticipated. Proposals are due by October 26, 2026, at 15:30. Delivery of the kit is required by November 20, 2026, to the Rock Island Arsenal in Illinois, with shipping costs borne by the contractor under FOB Destination terms. Payment will be processed electronically via Wide Area Workflow (WAWF) through the Defense Finance and Accounting Service. This procurement is designated as a total small business set-aside and incorporates various FAR and DFARS clauses, including Buy American preferences and specific prohibitions on covered defense telecommunications equipment.

POSTED

DEADLINE

Manufacturer of Tungsten Carbide Rotary FilesThis subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the manufacture and delivery of 5,804 tungsten carbide rotary files under NSN 3455-00-311-6182. The specified files must feature diamond cut fluting, 0.250 inch shanks, and 0.375 cutter head diameters. Performance will take place in Bremerton, Washington, and the opportunity is designated as a Total Small Business Set-Aside. The contractor must strictly adhere to MIL-STD-1916 or ASQ H1331 sampling standards and comply with DFARS 252.204-7012 regulations. The contract explicitly prohibits the use of additive manufacturing and the addition of mercury during production. Interested parties must respond by October 26, 2026, regarding this requirement categorized under NAICS code 333515.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

5 days ago

DEADLINE

in 6 days

General Info

Agency

Department Of Defense → Navair Warfare Ctr Aircraft Division

NAICS

333515 - Cutting Tool and Machine Tool Accessory Manufacturing

Place of Performance

NJ, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 30

Sources Sought

Response DeadlineJun 14

Deadline has passed

Submission Closed

06/14/2024, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division

Contacts2 people available

OfficeJOINT BASE MDL, NJ, 08733, USA

Organization / AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division

Office AddressJOINT BASE MDL, NJ, 08733, USA

Contacts

Chris Brake

contact@example.gov

William T. Hemhauser

contact@example.gov

Full Description

This is a Request for Information (RFI) for written information only. The United States Navy (USN) has a requirement to perform Depot Level Maintenance onT408 Engine utilizing a two (2) Moving Bridge Coordinate Measuring Machines (CMM). Existing Naval machinery does not support the required capabilities for T408 Grind & Balance Effort. The Naval Air Systems Command PMA261 CH-53K Support Equipment Team located in Lakehurst, NJ is seeking information about the capabilities of industry to provide a Commercial Off The Shelf Moving Bridge for the measurement of General Electric T408 Jet Engine Compressor Rotors and Stators. The total inventory of two (2) CMMs is planned to be procured. Information is sought from industry regarding CMM capabilities. Please provide the following information about any CMM systems capabilities that is a product, or combination of products, supplied by your company or organization, to other Department of Defense (DoD) or foreign military services, Navy aircraft depots or commercial industry. We are requesting the following details: A general description of your CMMs. The CMMs shall complete measuremetns in accordance with and meeting the inspection requirements found in the associated engine technical repair manuals and Fleet Readiness Center East (FRCE) local specifications. Projected lead times and rough order of magnitude development and production costs for a potential future acquisition are required. An overview of your approach to obsolescence management to ensure that any newly fielded CMMs would be sustainable and supportable over a minimum life cycle of twenty (20) years. The Government will judge proposed CMM capability based upon proposed CMM specifications, including options. Proposed CMMs shall be capable of the following: CMM #1 shall have a measuring volume of 1200mm (width) x 1500mm (depth) x 1000mm (height) and a total load bearing capacity (work piece plus tooling/fixturing) of 500 pounds. CMM #2 shall have a measuring volume of 1500mm (width) x 2200mm (depth) x 1000mm (height) and a total load bearing capacity (work piece plus tooling/fixturing) of 600 pounds. An overview of your CMM support maintenance philosophy including preventative and predictive maintenance tasks, including oil and vibration analysis and recommended intervals of tasks. An overview of your production capabilities to manufacture CMM. Provide details of the manufacturing facilities and equipment and a proposed delivery schedule strategy. If applicable, provide information about any DoD contracts for your CMM products and what if any data products were developed and provided to the Government. Any commercial contracts or testimonials are also welcome. Please provide points of contact for any of these references. Provide information about your company/organization including a brief description of your company/organization, whether you are a small or large business, 8(a) status, hub zone status, veteran/women owned status and any pastor present Small Business Innovative Research (SBIR) awards related to your electronic throttle control system products or technologies. Provide any pertinent product datasheets. Provide any additional information you think would be useful to consider in this RFI. It is requested that information be submitted NO LATER THAN 14 June 2024 to Naval Air Warfare Center Aircraft Division, Code BL51000 BLDG 120 Route 547, Joint Base MDL, NJ 08733-5000, by electronic mail to christopher.d.brake5.civ@us.navy.mil and william.t.hemhauser.civ@us.navy.mil . Respondents are notified that there is no solicitation package available, and a formal solicitation MAY NOT necessarily result from the RFI. No promise of a contract award is implied and respondents are not being asked to submit cost proposals. Any comments provided may or may not be included in a formal solicitation. The Government WILL NOT PAY for any information received in response to this RFI nor will the Government compensate any respondent with costs incurred in developing the information provided to the Government. The Government will not release any information marked with a Proprietary legend, received in response to this RFI, to any firms, agencies, or individuals outside the Government without written permission in accordance with the legend.