Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COR D ASSEMBLY, ELAST

Active
SPE8EE-26-Q-0413Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 61 units of a cord assembly with elastic components under NSN 4020-01-203-1007, with a delivery deadline of 125 days after award. The solicitation number is SPE8EE-26-Q-0413, issued on July 31, 2026, with responses due by August 8, 2026. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on procurement scale. Packaging must comply with DLA standards, and removed government identification from non-accepted supplies must be handled per specified procedures. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring authorization prior to any disclosure to foreign persons, including foreign nationals within the U.S., and applies strictly to contractors with approved JCP certification, completed DOD training, and DLA authorization. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization. Drawings are accessible only during open solicitation via the DIBBS portal, and all covered defense information is protected under RD002. The point of contact is Robert Guerra, and performance is required at Cherry Point, NC, 28533-5040.

General Info

Procure 61 cord assemblies with elastic components, deliver in 125 days, CMMC Level 2 required, ITAR/EAR controlled.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric MillsView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE8EE-26-Q-0413.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Robert Guerra
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CORD ASSEMBLY, ELASTIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
UI=EA
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4020-01-203-1007 Quantity: 61 EA Purchase Request: 7015362573QTY: 61 Delivery: 125 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 314994
New
International
F7047-260018 - Supply of 2-inch Steel Wire Rope – 8x1000 feet - ASTM A603 - RFP
Solicitation # WS5810211800
The Government of Canada, through Public Works and Government Services Canada on behalf of the Canadian Coast Guard, is soliciting proposals for the supply of 2-inch steel wire rope, specifically 8x1000 feet in length, manufactured to comply with ASTM A603-19 standards. The contracted material is intended for delivery to Sorel-Tracy, Quebec, with all technical and performance requirements outlined in the Annex Statement of Requirements. This solicitation, identified as F7047-260018 and assigned the solicitation number WS5810211800, was posted on July 31, 2026, and responses must be submitted by August 20, 2026, at 7:00 PM Eastern Time. The procurement is a federal tender open to all eligible suppliers without set-aside restrictions. Gabriel Piras of the Supply and Procurement Services Branch serves as the primary point of contact for this solicitation, with all inquiries directed to his official government email. The proposal must fully address the technical specifications, compliance with ASTM standards, and logistics requirements for timely delivery to the designated location. Bidders are expected to provide detailed information on manufacturing capabilities, quality control measures, and adherence to delivery timelines. Submissions must be made through the CanadaBuys platform, and failure to meet the stated requirements may result in disqualification. No additional documentation or citations are required beyond the materials referenced in the Statement of Requirements.
Department of Public Works and Government Services

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 314994
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-317G
The contract is for the procurement of four wire rope assemblies under NSN 4010-01-707-2675, with a delivery requirement of 121 days after delivery order. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons, including U.S. subsidiaries and foreign nationals, regardless of location. Only contractors certified under the US/Canada Joint Certification Program, who have completed required DLA export control training and questionnaire and received explicit approval, may access this controlled data. DFARS 252.225-7048 governs compliance with these restrictions. Packaging must adhere to DLA procurement standards, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applying. Physical marking of bare items is mandated per RQ017. The solicitation number is SPE4A5-26-T-317G, issued on July 30, 2026, with responses due by August 7, 2026. The contracting activity is the ASC Supplier Oper OEM Division under the Department of Defense, with performance occurring in New Cumberland, Pennsylvania, and primary point of contact being Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 314994
New
DIBBS
SWEEP WIRE, FAIRED S
Solicitation # SPE4A5-26-T-315A
The contract solicitation requests 17 units of SWEEP WIRE, FAIRED S with NSN 4010-00-769-0749, under solicitation number SPE4A5-26-T-315A, with a response deadline of August 7, 2026, and delivery required within 262 days of award. The item is subject to stringent regulatory requirements including Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance for third-party assessment organizations, and technical and quality specifications referenced from the DLA Master List. Delivery is to be made to New Cumberland, PA, with export control restrictions applying due to the presence of technical data governed by ITAR or EAR regulations; disclosure or transfer to foreign persons, including foreign nationals within the U.S., requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 governs compliance. Access to export-controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and DLA approval. Additional requirements include adherence to DLA packaging standards, proper handling of government identification on non-accepted supplies, configuration change management, and use of calibrated measuring and test equipment. The solicitation falls under NAICS code 314994 and is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with Hien-Van Trinh designated as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 314994
New
DIBBS
ROPE, WIRE
Solicitation # SPE4A5-26-T-316Z
This contract involves the procurement of one unit of rope and wire with NSN 4010-01-647-0579 under solicitation SPE4A5-26-T-316Z, requiring delivery within 131 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The supply is to be shipped FOB origin with zero variance in quantity, inspected and accepted at the destination, and packaged in strict accordance with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking without special identifiers. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively, and acceptance requires zero non-conformances unless otherwise stated. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition size. The item must be physically marked per RQ017 with the specified manufacturer part numbers and is subject to removal of government identification if not accepted. The unit of issue is each, priced per unit, and transportation follows DLA procedural notes C19 and C20. The contract does not currently have an approved technical data package available, as the data is proprietary or insufficient for competitive procurement.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2204
This contract specifies the procurement of double-braided nylon rope under NSN 4020-00-106-9412, with a total quantity of five reels, each containing 600 feet of rope for a net weight of 718 pounds per reel. The rope must comply with MIL-DTL-24050E or the current revision of MIL-DTL-24050F, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. The product must be acquired on a price-per-pound basis, with no multiple lengths per unit allowed, and packaging must conform to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129. The item is designated as a critical item requiring source inspection, but inspection requirements are waived for suppliers listed on the Qualified Suppliers List for Manufacturers or Distributors (QSLM/QSLD) for FSC 4020, provided they are compliant with the QSL program. Non-compliant bids must explicitly state deviations and risk denial or criminal penalties for unauthorized substitutions. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for specific functional components, and portable devices containing mercury must include a secondary containment as per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with unspecified attributes treated as major and acceptance criteria requiring zero non-conformances unless otherwise stated. Delivery is FOB origin, with a 160-day delivery window, and inspection and acceptance occur at the destination. The contract is a total small business set-aside under NAICS code 314994, with bids due by August 10, 2026, and delivery required by September 24, 2027.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 314994
New
DIBBS
Women-Owned Small Business (WOSB) Prime Subcontracting OpportunityA Women-Owned Small Business (WOSB)-certified firm is invited to serve as either a prime contractor or subcontractor to fulfill the full scope of work under a WOSB set-aside provision, ensuring preferential treatment for eligible women-owned businesses. The opportunity is categorized under NAICS code 314994, relating to other textile product mills, and is managed by the Department of Defense through its Construction & Equipment Manu & Con agency. Performance of the contract is required at Tinker AFB, with a zip code of 73145-8000. The solicitation was posted on July 29, 2026, and all responses must be submitted no later than August 10, 2026. This is classified as a subcontracting opportunity, meaning the winning entity will either lead the project as prime or support another prime under the WOSB set-aside framework. Participation is restricted to firms holding valid WOSB certification to comply with federal contracting rules aimed at promoting economic opportunity for women-owned small businesses.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 314994
New
DIBBS
Supply of Lacing and Tying Tape (NSN 4020-01-659-5502)The contract calls for the manufacture or supply of lacing and tying tape in accordance with military specifications and the DLA Master List, specifically under NSN 4020-01-659-5502. All materials must meet stringent quality and material safety standards required by defense procurement protocols, ensuring durability, performance, and compliance in military applications. The requirement is set aside exclusively for Women-Owned Small Businesses, with the NAICS code 314994 indicating classification under Other Miscellaneous Textile Product Mills. The place of performance is designated as Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, and all deliverables must be fulfilled to support defense logistics operations originating from this location. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, with the procurement structured as a subcontract under the Department of Defense’s Construction & Equipment Manu & Con organization.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 314994
New
DIBBS
Shock Cord Assembly ManufacturingThe contract is for the fabrication of a shock cord assembly consisting of an elastic cord with S-hooks attached at both ends, manufactured to meet stringent Department of Defense technical and quality standards. The work must comply with all specified requirements under NAICS code 314994, which pertains to other textile product mills, and is classified as a subcontract opportunity. Proposals must be submitted by the deadline of August 10, 2026, with the solicitation posted on July 29, 2026, through the DLA’s DIBBS system. The performance location and point of contact details are not specified, but the overseeing agency is the Department of Defense under the organization name Construction & Equipment Manu & Con. All materials and construction methods must ensure durability, safety, and consistency with military-grade specifications.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 314994
New
DIBBS
Fibrous Rope Supply (NSN 4020-01-723-6030)The contract entails the supply of 78 units of fibrous rope compliant with military specifications, identified by NSN 4020-01-723-6030, and requires adherence to standardized packaging and labeling protocols. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to bid, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 314994 applies, indicating the work falls under other textile product mills. The offeror must respond by the deadline of August 5, 2026, with the solicitation posted on July 29, 2026. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting agency is the Department of Defense under the organization Construction & Equipment Manu & Con, though specific point of contact details are not provided. All bids must be submitted through the official DIBBS platform via the provided link.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 314994
New
DIBBS
Fibrous Cord Manufacturing and SupplyThe contract involves the manufacturing and supply of 36 spools of fibrous cord identified by NSN 4020002460688, adhering strictly to military standards for material sourcing, production, packaging, and labeling. The work falls under NAICS code 314994 and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, ensuring compliance with all federal defense procurement requirements. The contract was posted on July 29, 2026, and is specifically tied to delivery obligations under the award and delivery identifiers SPE8EE26D0300 and SPE8EE26F2529, with a total of 1272 contract items referenced in the transaction. All components must meet exacting military specifications without exception, covering every stage from raw material acquisition through final packaging and labeling.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 314994
New
DIBBS
Fibrous Cord Supply and DeliveryThe contract entails the supply and delivery of four spools of fibrous cord with NSN 4020002460688 to Sheikh Isa Airbase in Bahrain under FOB destination terms, meaning the seller bears all costs and risks until the goods arrive at the designated location. Inspection and formal acceptance of the material occur promptly upon delivery at the airbase, ensuring compliance with specified requirements before final payment or acknowledgment. The contract is classified as a subcontract under NAICS code 314994 and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The posting date indicates the solicitation was made in July 2026, with no set-aside provisions or small business designations identified. All performance obligations are tied directly to the delivery point at the Bahrain airbase, and no additional point of contact or detailed administrative information is provided in the available data.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 314994
New
DIBBS
Supply of Fibrous Cord (NSN 4020002460688)The contract entails the procurement and delivery of 10 units of fibrous cord identified by NSN 4020002460688, sourced as a commercial off-the-shelf item. The supplier is responsible for full end-to-end handling including sourcing the product, proper packaging, accurate labeling, and timely FOB Destination shipment to Fort Bragg, North Carolina. This is a subcontract under the broader procurement framework managed by the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 314994 for other textile product mills. The solicitation was posted on July 29, 2026, and all logistical obligations must be met in compliance with federal supply standards and delivery timelines to ensure readiness and operational support.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, VEHICLE
Solicitation # SPE8EF-26-Q-0156
The contract pertains to the procurement of 43 units of a cargo tie-down device for vehicles, identified by NSN 3990-01-317-6965, under solicitation SPE8EF-26-Q-0156. Deliveries are required within 60 days after award, with firm fixed pricing and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the items must be packaged in compliance with ASTM D3951, though DLA’s Master List of Technical and Quality Requirements take precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must meet RP001 guidelines. The unit of issue is each, and shipment is FOB origin. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Technical data is not currently available for competitive procurement due to proprietary or insufficient documentation, and casting or forging may be involved, requiring potential support through DLA’s Casting and Forging Assistance program. The contract specifies delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20. The item is sourced from authorized manufacturers including New England Manufacturing Group and Sikorsky Aircraft Corporation, both referencing part number 70217-01003-173. The contract includes provisions for Covered Defense Information and mandates full compliance with all DLA technical and quality requirements referenced by R or I numbers from the DLA Master List. Pricing, delivery, and packaging terms are strictly defined with no flexibility, and all government identification must be removed from non-accepted supplies. The point of contact for inquiries is Sharon Forde, and the solicitation’s response deadline is August 7, 2026, with an award anticipated shortly thereafter, leading to a required ship date of July 21, 2026. The Department of Defense is the contracting agency, and the procurement falls under federal acquisition protocols.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541712
New
DIBBS
ADAPTER SET, GROUND
Solicitation # SPE8EF-26-T-1474
The contract is for the procurement of 14 units of an ADAPTER SET, GROUND, identified by NSN 1730-01-479-1307, under solicitation SPE8EF-26-T-1474, with a response deadline of August 5, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 541712, and managed by the Defense Logistics Agency’s Construction & Equipment Manu & Con office. Delivery is required 167 days after order placement at the DDSP New Cumberland Facility in New Cumberland, PA, with FOB origin terms meaning title and risk transfer to the government upon shipment. The item is subject to export control under either ITAR or EAR, mandating strict compliance with DFARS 252.225-7048; only DLA-approved contractors with JCP certification, completed training, and authorized access may handle the technical data, which includes prohibition on disclosure to foreign persons whether domestic or abroad. Packaging and labeling must adhere to RP001 DLA requirements, superseding ASTM D3951, with all shipments marked per MIL-STD-129 and U.S. military property identified using MIL-STD-130N with Data Matrix barcodes. Hazardous materials, if applicable, must be labeled per 29 CFR 1910.1200, with pre-award label and MSDS submissions required. The contract incorporates numerous FAR and DFARS clauses including 252.204-7012 for safeguarding covered defense information, 252.240-7997 for NIST SP 800-171 assessment requirements, and 252.204-7018 prohibiting acquisition of covered telecommunications equipment, reflecting CMMC Level 2 certification expectations tied to third-party assessment organizations. Payment must be processed via WAWF using electronic invoices and receiving reports, with accelerated payments to small business subcontractors required. Inspection and acceptance occur at destination, with the contractor responsible for full compliance with all specifications and documentation. All offerors must hold a valid UEI, certify their small business status, and disclose any participation in joint ventures under socioeconomic programs or use of covered defense telecommunications equipment under clause 252.204-7016.
Research and Development in the Physical, Engineering, and Life Sciences (except Biotechnology)

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332216
New
DIBBS
BINDER, LOAD
Solicitation # SPE8EF-26-T-1473
The contract solicitation SPE8EF-26-T-1473 is for the procurement of 267 units of ratchet binder, load, identified by NSN 3990015450027, under a Women-Owned Small Business Set-Aside. Delivery is required FOB Origin with a 149-day period after receipt of order, with an original delivery target of November 26, 2026, and a need ship date of December 28, 2026. Final inspection and acceptance occur at the destination facility located at Tracy, California, with all shipments directed to DLA Dist San Joaquin, Receipt Warehouse 57. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization strictly following DLA Packaging Requirements RP001, and all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Barcoding and hazardous material labeling must comply with applicable federal regulations including OSHA’s Hazard Communication Standard, and no government identification may be removed from non-accepted supplies. The contract incorporates numerous FAR and DFARS clauses governing labor equity, trafficking in persons, employment eligibility, sustainable products, cybersecurity, safeguarding of covered defense information, export controls, hazardous materials, and electronic payment through WAWF. Contracting officers and representatives are not named, but payment must be submitted electronically via WAWF using the Invoice 2in1 format for fixed-price line items. Compliance with NIST SP 800-171 and cybersecurity safeguarding requirements is mandatory, with deviations applied for certain clauses. The solicitation requires offerors to self-certify as a Women-Owned Small Business, submit their Unique Entity ID and CAGE Code, and disclose any involvement with covered defense telecommunications equipment or services. No pricing information is officially listed in the contract’s CLIN, although historical pricing for similar items is referenced but not binding. Proposals must be submitted electronically through DIBBS by the August 5, 2026 deadline, with no attachments or formal Section M evaluation factors provided.
Saw Blade and Handtool Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 423690
New
DIBBS
LEVER
Solicitation # SPE8EE-26-Q-0414
The contract solicitation titled LEVER, identified by solicitation number SPE8EE-26-Q-0414, seeks the procurement of one unit of part number 3950-00-395-0213 under purchase request 7016075362, with a delivery requirement of 90 days after delivery order. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless a subsequent amendment supersedes it. The contract incorporates DLA packaging standards, mandates the removal of government identification from non-accepted supplies, requires specific documentation for source approval requests, and may involve covered defense information, necessitating compliance with relevant security protocols. Performance is to be conducted at a military postal address designated as FPO with ZIP code 96669, and all proposals must be submitted by August 8, 2026, with the solicitation posted on July 31, 2026. The primary point of contact for inquiries is Robert Guerra, reachable via email and phone, and all relevant information can be accessed through the DIBBS portal.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484121
New
DIBBS
Logistics and Domestic Freight Delivery (FOB Origin)The contract pertains to domestic freight transportation services under FOB Origin terms, requiring the movement of goods from the manufacturer’s location to government-designated destinations using a Department of Defense Activity Address Code for shipment tracking and accountability. Transportation must comply with all federal logistics protocols, including mandatory reporting through the Wide Area WorkFlow system to ensure real-time visibility and documentation of each delivery. The work is classified as a subcontract under NAICS code 484121, specifically for truck transportation of freight and cargo, and is issued by the Department of Defense under the agency name Construction & Equipment Manu & Con. Bids are due by August 11, 2026, with the opportunity posted on July 30, 2026, and all performance obligations must be fulfilled within the scope of DoD logistics standards, ensuring timely, secure, and correctly documented delivery to designated federal locations.
General Freight Trucking, Long-Distance, Truckload

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract requires the provision of compliant packaging, preservation, and labeling services for tie down devices in strict adherence to MIL-STD-2073-1E, DLA RP001, and MIL-STD-129 standards. All items must be packaged and labeled with Data Matrix ECC200 symbology to ensure accurate and legible traceability throughout the supply chain. The work must meet military specification requirements for durability, environmental protection, and labeling content, including essential information such as item identification, lot numbers, and handling instructions. The service is classified under NAICS code 561910 as a subcontract opportunity issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, with a response deadline of August 11, 2026, and an posted date of July 30, 2026. Performance location and point of contact details are not specified, but the solicitation is accessible through the DIBBS portal for further information.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Manufacturing of Aircraft Tie Down Mooring Devices (Critical Safety Item)The contract requires full manufacturing, quality control, and compliance testing of 250 aircraft tie down mooring devices identified by NSN 1730-01-288-3613, classified as a critical safety item under military specifications. All units must meet exacting standards for performance, durability, and safety to ensure operational reliability in demanding environments. The work encompasses end-to-end production including material sourcing, fabrication, inspection, and certification to confirm adherence to applicable defense requirements. This is a subcontract opportunity posted by the Department of Defense under the NAICS code 332999 for other miscellaneous fabricated metal product manufacturing. Responses are due by August 11, 2026, with the solicitation made publicly available on DIBBS as of July 30, 2026. There is no set-aside designation specified, and performance location details are not provided. The contract emphasizes stringent quality assurance protocols and full compliance as non-negotiable requirements for award consideration.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 Assessment Support)The contract seeks support services to achieve Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance through a structured approach involving gap analysis, policy and procedure documentation, System Security Plan (SSP) development, and coordination with an accredited C3PAO. The work will focus on identifying current cybersecurity control deficiencies, aligning organizational practices with CMMC requirements, and producing the necessary documentation to demonstrate compliance, all of which are critical for successful third-party assessment. The effort is intended to enable the contractor to meet federal standards for handling controlled unclassified information within the defense supply chain. This is a subcontract opportunity under the NAICS code 541512 for other computer-related services, issued by the Department of Defense under the organization name Construction & Equipment Manu & Con. The solicitation was posted on July 30, 2026, with a response deadline of August 8, 2026. Although the place of performance and point of contact are unspecified, the effort is expected to be conducted in support of a defense-related entity requiring CMMC Level 2 certification. The nature of the work implies ongoing collaboration with security professionals and adherence to rigorous documentation and procedural standards to pass formal CMMC accreditation.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Palletization ServicesThe contract requires the provision of military-compliant packaging, marking, and palletization services strictly in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards to meet Department of Defense logistics requirements. All materials must be prepared for shipment by the Defense Logistics Agency with full adherence to these specifications, ensuring proper handling, transportation, and identification throughout the supply chain. The work is classified as a subcontract under NAICS code 561910 and is managed by the Department of Defense under the Construction & Equipment Manufacture and Con division, with a response deadline of August 8, 2026, and a posting date of July 30, 2026. Performance is expected to meet all federal defense logistics protocols without exception, and the place of performance is not specified, indicating potential flexibility in location contingent upon vendor capability and logistical needs.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Export Control & Technical Data Compliance SupportThe contract requires comprehensive ITAR and EAR compliance support for technical data, focusing on the implementation and enforcement of export control regulations to ensure adherence to U.S. and Canadian Joint Certification Program standards. This includes developing and delivering training programs, establishing control procedures for sensitive technical information, and maintaining ongoing compliance with evolving regulatory frameworks governing the handling and transmission of controlled data. The scope emphasizes practical application across operational environments to mitigate risks of unauthorized disclosures and ensure alignment with federal export control mandates. This subcontract is issued under NAICS code 541611 by the Department of Defense under the organization name Construction & Equipment Manu & Con, with a response deadline of August 8, 2026, and a posting date of July 30, 2026. The place of performance and point of contact details are not provided, but the work must be conducted in a manner consistent with U.S. defense contracting standards. All activities must support secure handling of technical data and foster a culture of compliance across all levels of the subcontracted effort, with particular attention to cross-border data sharing under the U.S.-Canada bilateral program.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
Supply of BLOCK, TACKLE (NSN 3940-01-709-0208)The contract requires the procurement and delivery of 27 units of BLOCK, TACKLE designated by NSN 3940-01-709-0208, fully compliant with military specifications. All aspects of the supply chain—including sourcing, packaging, marking, and inspection—must adhere to Defense Logistics Agency standards to ensure readiness and interoperability within DoD operations. The work is classified as a subcontract under NAICS code 332439, and the contracting authority is the Department of Defense through its Construction & Equipment Manu & Con organization. The solicitation was posted on July 30, 2026, with a response deadline of August 8, 2026, providing interested parties approximately ten days to submit proposals. Performance of the contract is expected to support DoD logistics requirements, though the specific place of performance is not defined. The contract opportunity is accessible through the DIBBS system under reference number SPE8EE26Q0412, and all deliverables must meet exacting quality control benchmarks to pass inspection prior to acceptance.
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
NIST SP 800-171 Cybersecurity Compliance SupportThis contract supports compliance with NIST SP 800-171 requirements, focusing on performing a gap assessment to identify cybersecurity shortcomings, developing a comprehensive System Security Plan, and ensuring adherence to DFARS 252.204-7012 for the proper reporting of cyber incidents. The work is critical for safeguarding controlled unclassified information within the Department of Defense supply chain and requires a structured approach to align with federal cybersecurity standards. The performance location is specified as Fort Stewart, Georgia, with all tasks tied to fulfilling Defense Federal Acquisition Regulation requirements. The contract is a small business set-aside under the SBA Total Small Business Set-Aside category, meaning only small businesses can compete, and it falls under NAICS code 541512 for Computer Systems Design Services. Solicitations were posted on July 30, 2026, with proposals due by August 10, 2026. The work will be executed under a subcontract structure, and the prime contractor is affiliated with the Department of Defense through the Construction & Equipment Manu & Con organization. All efforts must ensure timely and accurate compliance documentation, cyber incident response readiness, and ongoing alignment with evolving NIST and DFARS mandates without reliance on external file-based citations or references.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details