Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CORD ASSEMBLY, ELECT

Active
SPE4A6-26-R-XB69Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of 50 units of a cord assembly with NSN 5995-25-163-5683, under solicitation SPE4A6-26-R-XB69, with a total small business set-aside classification. The delivery requirement is set for 233 days after contract award, and responses are due by August 15, 2026. The technical and quality specifications governing the item are drawn from the DLA Master List of Technical and Quality Requirements, with applicable references including RQ001 for tailored quality requirements, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Packaging must comply with DLA packaging requirements under RP001, and the item is subject to Covered Defense Information regulations under RD002. Technical data associated with this item is restricted under a Kongsberg Defence & Aerospace AS License Agreement 34, requiring strict non-disclosure and data destruction protocols, with vendors mandated to complete and submit forms from the designated DLA portal. Export control applicability is enforced under RQ032, as the technical data is regulated under ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization, including foreign nationals within the U.S. Compliance demands adherence to DFARS 252.225-7048, and only contractors with approved JCP certification, completed DOD export-controlled data training, and DLA approval may access the technical data. The point of contact for inquiries is Emily Andersen of the ASC Commodities Division, Department of Defense.

General Info

50 cord assemblies under NSN 5995-25-163-5683, due in 233 days, ITAR/EAR controlled, JCP certified vendors only.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

RFQ SPE4A6-26-R-XB69 for NSN 5995-251635683

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Emily Andersen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CORD ASSEMBLY, ELECTRICAL RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
A KONGSBERG DEFENCE & AEROSPACE AS LICENSE AGREEMENT 34 RESTRICTED TECHNICAL DATA PACKAGE EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION CONDITIONS APPLY. VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN THE "34 KONGSBERG DEFENCE & AEROSPACE AS (CROWS)" LICENSE AGREEMENT FOLDER AVAILABLE AT https://tdmt.dla.mil/TDMT/Client.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5995-25-163-5683 Quantity: 50 EA Delivery: 233 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M5-26-T-368L
This contract specifies the procurement of an electrical connector receptacle under NSN 5935-01-462-7986 with a required quantity of 3,842 units, to be delivered 243 days after contract award, FOB origin, with no tolerance for quantity variance. The item must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, specifically referencing MIL-DTL-38999/24J and MIL-DTL-38999N revisions dated 2022 and 2023 respectively, and is subject to qualification under the Qualified Products List for Federal Stock Class 5935. Manufacturing traceability is mandatory, and materials produced between July 2006 and June 2016 by Amphenol, Matrix, or Pyle National are explicitly prohibited, regardless of new or surplus status. The use of any Class I ozone-depleting substances in production is strictly forbidden without explicit written approval from the contracting officer, with exceptions only for commercial items as defined by FAR 11.001. Packaging must adhere to DLA requirements, including MIL-STD-129 labeling and palletization per RP001, with hazardous materials following FED-STD-313 and IP025, and non-hazardous items conforming to ASTM D3951 only if not overridden by DLA standards. Delivery must be made to the DLA Distribution facility in New Cumberland, PA, with the required ship date set for April 18, 2027. All bids are subject to full and open competition under the solicitation number SPE7M5-26-T-368L, with point of contact Andrew Bracken at the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M2-26-T-5998
This contract specifies the procurement of an electrical receptacle connector identified by NSN 5935-01-171-9431 and part number MS3402D22-22P, manufactured in compliance with SAE AS34021 Revision E dated 01/01/2017 and referenced against SAE AS50151 Revision E dated 06/01/2020. The item is classified as a qualified product under the Qualified Products List for Federal Stock Class 5935, requiring adherence to procurement note H01. Technical and quality requirements are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. The connector must not contain mercury or mercury-containing compounds except in permitted exceptions such as batteries, fluorescent lights, weapons systems, or specified instruments, with portable devices containing mercury requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Strict packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with preservation following MIL-DTL-55330 for connectors. The item is designated as a critical application component, and configuration changes require formal engineering change proposals or variance requests. The contract calls for a quantity of 113 units to be delivered FOB origin within 161 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution facility at New Cumberland, Pennsylvania. Packaging must be documented using the specified preserve, wrap, and cushioning codes per QUP 001, with a packaging code of U. No special marking is required. Transportation logistics follow DLA Procurement Notes C19 and C20. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, under contract number SPE7M2-26-T-5998, and the original required delivery date is March 27, 2027, although the need-by date is January 26, 2027. The unit price is $113.00 per unit, for a total contract value of $12,769.00, with the agency
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M1-26-U-5053
The contract is for the procurement of 11 electrical connector receptacles with part number 2583A-125 and NSN 5935-01-524-0367, supplied by PAULUHN ELECTRIC MANUFACTURING LLP under solicitation SPE7M1-26-U-5053. Delivery is required within 57 days FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. The item is covered under DLA DIRECT, CONUS, and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA packaging requirements. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 is permitted. The unit of issue is each, with a total price of $11.00, and the contract includes strict requirements for removal of government identification from non-accepted supplies and bare item marking. All packaging and labeling must align with the specified QUP of 001 and DLA unit of issue guidelines.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE4A5-26-T-330U
This contract specifies the procurement of an adapter connector with part number 30-269-2P20F07 and NSN 5935-01-466-6841, for a quantity of five units to be delivered FOB origin within 170 days, with a required ship date of January 31, 2027, and an original delivery deadline of April 20, 2028. The contract enforces strict compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise defined, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively; unspecified attributes are treated as major. The product is classified as a critical application item and must meet all technical and quality requirements listed in the DLA Master List, incorporating referenced R and I numbers. Cybersecurity compliance requires a CMMC Level 2 self-assessment. The item is subject to configuration change management procedures, variance requests, and removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory per RQ017. Delivery is to be made to DLA Distribution San Joaquin at Tracy, California, with no quantity variance permitted. Transportation instructions align with DLAD Proc Notes C19 and C20, and all documentation must adhere to the contract’s unit of issue and sourcing standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
PLATE, RETAINING, ELECTR
Solicitation # SPE4A6-26-T-12SR
The contract specifies the procurement of one retaining plate for an electrical connector, part number 2541579, with NSN 5935-01-209-3480, supplied by Honeywell International Inc. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers including RC001, RP001, RQ011, RQ017, and RT001. Packaging, marking, and handling must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is to be delivered FOB origin within 20 days to the specified destination at US Army SSA Powidz AB in Poland, with zero tolerance for quantity variance. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. The delivery is subject to DLA packaging and transportation regulations, and the contract enforces strict verification at the destination point. All documentation and compliance obligations are tied to the solicitation number SPE4A6-26-T-12SR, with the required delivery date set for July 29, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
JACK, TELEPHONE
Solicitation # SPE7M5-26-Q-0841
The contract pertains to the procurement of three telephone jacks identified by NSN 5935-00-192-4789 and part number M641/12-1, supplied in accordance with military specification MIL-DTL-641/12D and quality assurance standard QAP 16236. The item is classified as a critical application item subject to stringent technical and quality requirements detailed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers such as RQ001, RQ002, RQ009, RQ011, RQ017, and others, which govern configuration management, inspection at origin, packaging, marking, and deviation requests. The product must comply with all applicable DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, unit containment, and palletization standards. Strict prohibitions are in place against the intentional use of ozone-depleting substances and mercury or mercury-containing compounds in manufacturing, preservation, packaging, or marking, with narrow exceptions for functional components like batteries or instrumentation as authorized by NAVSEA. The item must be delivered in its original packaging at origin, with inspection and acceptance also occurring at origin, and no quantity variance is permitted. The delivery schedule requires fulfillment 380 days after award, with shipment directed to the designated DLA receiving warehouse in Tracy, California. Full and open competition applies, and the contract is issued under solicitation SPE7M5-26-Q-0841 with a response deadline of August 20, 2026, and a required delivery date of January 25, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
Federal
SWITCH CONNECT ASSY
Solicitation # N0010426QEC97
The procurement pertains to the SWITCH CONNECT ASSY with solicitation number N0010426QEC97, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, with responses due by September 4, 2026. The contract mandates strict compliance with the Individual Repair Part Ordering Data (IRPOD), which is mandatory for vendor review and serves as the primary technical reference. Technical documentation, including drawings, specifications, and STRs, must be obtained from the BPMI e-Commerce portal using pre-registered credentials, and all cited documents must be used in their entirety at the specified revision levels unless formal approval is granted to deviate. Order of precedence is clearly defined, with contract amendments and schedule provisions taking priority over referenced standards. All items must adhere to cleanliness controls as outlined in MIL-STD-767, MIL-STD-2041, and related directives, with packaging governed by MIL-PRF-23199 where applicable; use of MIL-DTL-24466 green poly bags is conditional on specific cleanliness requirements and cannot override contract-specified alternatives. Mercury or mercury-containing compounds are strictly prohibited in contact with delivered hardware. Quality assurance obligations are governed by the IRPOD, requiring contractors to maintain and make available all inspection records to the government throughout contract performance and beyond. The contract includes mandatory compliance with cybersecurity maturity model certification, veteran and disability Equal Opportunity provisions, small business program representations, and the annual representations and certifications deviation, all effective February 2026. A stop-work order clause, security prohibitions, and export controls are invoked with a NOFORN designation on all technical documents, requiring prior approval from the Naval Sea Systems Command for any transmission to foreign nationals. Delivery is governed by FOB destination terms, pricing is valid for 60 days after the closing date unless otherwise specified, and contractual documents are deemed issued upon electronic transmission. The material must be delivered with a Certificate of Compliance per DI-MISC-81356, submitted at the time of delivery for each unique contract line item. Technical data deliverables are specified via DD Form 1423 with detailed requirements for submission frequency, approval codes, distribution statements, and pricing groups aligned with DoD guidelines. All communications and documentation must flow through designated points of contact, and any deviation, waiver, or request for extension must include justification and supporting technical data, submitted initially to the Government Quality Assurance Representative for review and forwarding to the Post
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334417
New
Federal
SWITCH CONNECT ASSY
Solicitation # N0010426QEC48
The contract pertains to the procurement of SWITCH CONNECT ASSY under solicitation N0010426QEC48, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical (NAVSUP WSS-MECH) under the Department of Defense. Pricing is valid for 60 days post-closing date unless otherwise specified, and vendors must review the mandatory Individual Repair Part Ordering Data (IRPOD) via the BPMI e-Commerce site, requiring pre-registration and password access. The technical requirements are governed by the IRPOD, drawings, specifications, and Military Standards referenced in the solicitation, with strict order of precedence established: contract amendments supersede the schedule, which supersedes terms and conditions, and so on down to referenced documents. Contractors must use full revisions of all cited documents unless prior written approval is obtained from the Contracting Officer for deviations. Compliance with cleanliness standards such as MIL-STD-767 and MIL-STD-2041 dictates packaging requirements under MIL-PRF-23199, with specific use of MIL-DTL-24466 green poly bags permitted only under defined conditions. Mercury or mercury-containing compounds are strictly prohibited from contact with the supplied hardware. Quality assurance is governed by the IRPOD, and contractors must maintain complete inspection records available for government audit throughout performance and beyond. All contractual documents are deemed issued upon electronic transmission, including email or other commercial methods, and government acceptance constitutes bilateral agreement. Technical data and drawings marked NOFORN are subject to export controls and require prior approval from Naval Sea Systems Command for any release to foreign nationals. Distribution statements for unclassified documents fall under six defined codes, with F limiting distribution to U.S. entities only. Deliverables require submission of Certificates of Compliance per DI-MISC-81356 with each shipment, and the DD Form 1423 governs technical data package requirements including inspection and acceptance codes, submission frequency, and pricing groups. Small business representations are mandated under DEV 2026-O0037, and cybersecurity maturity certification requirements apply. The award is subject to a total small business set-aside, equal opportunity provisions for veterans and workers with disabilities, and prohibitions on the use of certain materials and labor practices including child labor. Packaging must comply with MIL-STD-2073 where applicable, and fire-retardant materials are no longer required. Vendors must comply with all terms regarding delivery timelines, waiver requests, and technical
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334417
New
DIBBS
Electrical Connector Backshell Manufacturing and SupplyThe contract involves the manufacture and supply of 14 units of electrical connector backshells designated by NSN 5935-01-661-2764 and part number M85049/1819N05, with strict compliance to SAE AS85049/18E and AS85049 standards. The products must meet all Quality Pilot List requirements and defense logistics specifications to ensure full interoperability and reliability in military applications. All manufacturing and testing procedures must align with established defense quality benchmarks, and the items will be delivered to the specified place of performance in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s Active Devices Division. The solicitation is structured as a subcontract and requires responses by August 19, 2026, with the opportunity posted on August 4, 2026, under NAICS code 334417 relating to other electronic component manufacturing.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
Electrical Connector Receptacle Supply (Qualified Product)
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
Military-Grade Electrical Connector Supply
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
Electrical Coil Manufacturing (Semiconductor-Grade)
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334332
New
DIBBS
Military-Grade Cable Assembly Manufacturing and Supply

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details