Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CORD, ELECTRICAL

Active
SPE7M0-26-T-031JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single electrical cord with NSN/Part Number 6145-01-695-6822, requiring delivery within five days of award. The solicitation is issued under SPE7M0-26-T-031J with a response deadline of August 17, 2026, and was posted on August 5, 2026. This is a federal procurement under the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at Camp Lejeune, North Carolina, 28542-0088. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA packaging requirements, and if the advice code is 2N, 28, or 34, the cord must be supplied in continuous length with no multiple unit packs; if 2P or 39, continuous length with multiple unit packs is acceptable, with the advice code superseding any conflicting schedule data. Any configuration changes require an engineering change proposal or variance request, and non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including details for both the approved and alternate part. Primary point of contact is Abaigael Masterson at abaigael.masterson@dla.mil or 614-693-2532.

General Info

Procure one electrical cord NSN 6145-01-695-6822, deliver in five days to Camp Lejeune, comply with DLA packaging and technical requirements.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

PSC BOX 20088, CAMP LEJEUNE, NC, 28542-0088, US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-031J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Abaigael Masterson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CORD,ELECTRICAL
CORD,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. **************************************************
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR NSN/Part Number: 6145-01-695-6822 Quantity: 1 EA Purchase Request: 7017738751QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING STATION
Solicitation # SPE8E6-26-T-4037
The contract is for the procurement of 30 soldering stations with NSN 3439-01-576-6864 and part number 8007-0528, issued by DLA District San Joaquin under solicitation SPE8E6-26-T-4037. Each unit must feature an analog dial control with Celsius/Fahrenheit display and temperature lockout functionality, and must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation and packaging. The items must be shipped FOB origin with delivery due in 61 days, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA guidelines. The contract prohibits intentional addition of mercury or mercury-containing compounds to the equipment except for specific exemptions such as batteries, fluorescent lights, sensors, or instruments as defined by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The delivery address is W62G2T, W1A8 DLA DIST SAN JOAQUIN, Tracy, CA 95304-5000, with the original required delivery date set for November 18, 2026, and a need ship date of April 8, 2026. The unit price is $30.00, totaling $900.00 for the order, with zero variance allowed in quantity. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date or award date. The contract also references hazardous materials packaging rules and transportation procedures outlined in DLAD Proc Notes C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TIP, SUCTION DEVICE,
Solicitation # SPE8E5-26-T-3810
This contract pertains to the procurement of 47 units of a suction device tip, identified by NSN 3439-01-399-4904 and part number 1121-0417-P1, under solicitation SPE8E5-26-T-3810. The item must be new and unused, packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking requirements, and delivered FOB origin with no quantity variance permitted. Delivery is required within 167 days from the contract date, with inspection and acceptance occurring at the destination point, specifically DLA Distribution San Diego. The contractor must adhere to DLA’s packaging standards, including the use of approved unit containers and palletization protocols, and all shipments must comply with hazardous materials handling procedures outlined in IP025. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances in sampled lots unless otherwise directed, with critical, major, and minor attributes assigned verification levels of VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the product except for functional uses in batteries, fluorescent instruments, sensors, controls, weapon systems, or specified chemical reagents per NAVSEA guidelines; portable devices containing mercury must include a secondary containment barrier. Technical and quality requirements are referenced from the DLA Master List, and the contract incorporates applicable defense standards for documentation and sampling methods. The delivery deadline is set for February 1, 2027, with an original required delivery date of November 24, 2026, and all communications and inquiries should be directed to the primary point of contact, Brandon Wicker.
SAN DIEGO

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TOOL SET BRIDGE REM
Solicitation # SPE8E5-26-T-3820
This contract pertains to the procurement of a single unit of a tool set designated by NSN 5210015831759 under solicitation SPE8E5-26-T-3820, with a required delivery in 167 days from the contract award, targeting an original delivery date of April 9, 2027. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific directives for Item Unique Identification (IUID) aligned with MIL-STD-130 and the DFARS 252.211-7003 clause. Packaging and labeling must adhere to MIL-STD-129 and ASTM D3951, with palletization governed by DLA Packaging Requirements, and all government identification must be removed from non-accepted supplies as per RQ011. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance is permitted in quantity. The sole unit is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation procedures defined by DLAD Proc Notes C19 and C20. The contract includes specific data elements such as the purchase request number, unit price, and delivery timeline, with the seller required to meet the mandatory ship date of February 1, 2027. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the item falls under NAICS code 332216 for federal acquisition by the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
INDICATOR, DIAL
Solicitation # SPE8E5-26-T-3846
The contract is for the procurement of three Indicator, Dial units with NSN 5210016581122 and part number 599-7040 from HEXAGON MANUFACTURING INTELLIGENCE, LLC, under solicitation SPE8E5-26-T-3846. The unit price is $3.00 per unit, totaling $9.00, with delivery required within 167 days from the award date, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, with all items subject to DLA’s Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with DLA’s RP001 and MIL-STD-129, with palletization following DLA-specific guidelines, and all labeling and markings must be in accordance with these directives. The items are designated as a Critical Application Item and may be subject to Covered Defense Information requirements. Delivery must be made to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and an original delivery deadline of March 26, 2027. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the Unit of Issue conforms to DoD standards as referenced in the official DLA unit of issue document.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TIP, ELECTRIC SOLDERING
Solicitation # SPE8E6-26-T-4017
The contract is for the procurement of 112 units of a tip for an electric soldering iron, identified by NSN 3439-01-376-8025 and part number 1121-0305-P1 from PACE, INCORPORATED. Delivery is required within 63 days of award, with a specified ship date of August 5, 2026, and an original required delivery date of January 10, 2027. The items must be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special codes, and palletization as specified. Hazardous materials provisions apply, strictly prohibiting the intentional addition of mercury or mercury-containing compounds to the product, with limited exceptions for batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof and have a secondary containment boundary per NAVSEA 5100-003D. The item is classified as critical per FLIS, and the contract incorporates all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The delivery address is DLA Distribution San Diego, and transportation follows DLAD Proc Note C19 and C20. The contract is issued under solicitation SPE8E6-26-T-4017, with a response deadline of August 17, 2026, and is managed by the Department of Defense through an authorized unit of issue.
SAN DIEGO

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
FILE, ROTARY
Solicitation # SPE8E5-26-T-3793
The contract pertains to the procurement of cylindrical tungsten carbide rotary files with medium cut teeth, specified at 23 to 28 teeth per circumference, featuring a 0.250 inch shank diameter, a 0.500 inch cut head diameter, a 1.00 inch cut head length, and an overall length of 2.750 inches. These items must fully comply with the military specification A-A-51146C, including all requirements outlined in Tables II and III, and conform to TDP Revision A Gen 1. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s packaging guidelines. The material is identified by NSN 3455-01-009-2858, with a purchase request number 7017758420 and a unit of issue of each. The contract calls for a quantity of 945 units at a unit price of $945.00, totaling $892,725.00, with no variance allowed in quantity. Delivery is required FOB origin within 67 days of the contract award, with the destination being the DLA Distribution San Joaquin facility at 25600 S Chrismann Road, Tracy, CA 95304-5000. Inspection and acceptance occur at the destination point. The original required delivery date is December 12, 2026, though the needed ship date is July 1, 2026. Transportation instructions follow DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3793, issued under a federal procurement with NAICS code 332216. The contracting office is the Department of Defense, DLA Distribution San Joaquin. The point of contact for inquiries is Don Trachtman, reachable via phone and email. The document was posted August 5, 2026, with a response deadline of August 17, 2026. All packaging, labeling, and handling must comply with federal and DLA standards, and government identification must be
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
FIXTURE, CALIBRATION
Solicitation # SPE8E5-26-T-3805
The contract pertains to a calibration fixture identified by part number 152D5256 and NSN 5220-01-289-6319, with a requirement for four units, each to be delivered as a single unit (EA). The supplier, GENERAL DYNAMICS-OTS, INC. with CAGE code 05606, must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA web portal, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The product is deemed an exact match as specified in the purchase order text, with no approved substitutions permitted. Delivery is required within 167 days after contract award, with the place of performance located at New Cumberland, Pennsylvania, zip 17070-5002. The solicitation, issued under number SPE8E5-26-T-3805, was posted on August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 332216 for industrial machinery manufacturing. Point of contact for inquiries is Khue Nguyen of the DDSP New Cumberland Facility, reachable via phone or email provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELECTRI
Solicitation # SPE8E6-26-T-4019
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
WIRE, NONELECTRICAL
Solicitation # SPE8E4-26-T-1966
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
PULLER, MECHANICAL
Solicitation # SPE4A6-26-T-12FR
The contract pertains to the procurement of six mechanical pullers identified by NSN 5120-15-151-5848 and part number 99366858 from IVECO DEFENCE VEHICLES S.P.A., with a unit price of $6.00 per unit and a total contract value of $36.00. Delivery is required within 171 days from the award date, with shipment to be made FOB origin in accordance with strict packaging standards: all items must be packaged per ASTM D3951, labeled and marked per MIL-STD-129, and palletized according to DLA Packaging Requirements for Procurement, with DLA’s Master List of Technical and Quality Requirements taking precedence over any standard. Sampling and inspection must conform to MIL-STD-1916 or ASQ H1331 Table 1 using zero defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance both occur at destination, with no variance permitted in quantity—exact delivery of six units is mandatory. The delivery point is the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of January 31, 2027, and an original delivery deadline of March 26, 2027. All technical and quality standards referenced are governed by the DLA Master List, and compliance with transportation protocols under DLAD Proc Notes C19 and C20 is required. The contract was issued under solicitation SPE4A6-26-T-12FR, with response deadlines and award details managed by the ASC Commodities Division of the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 423510
New
DIBBS
STRIP, METAL
Solicitation # SPE7M0-26-Q-1147
This contract specifies the procurement of cold-rolled low-carbon steel strip, compliant with ASTM A109/A109M and SAE AMS2807C standards, measuring 0.0625 inches thick by 3 inches wide, in whole-foot lengths between 8 and 16 feet, with a weight of 0.638 pounds per foot and Edge Type No. 2. The material must be supplied as stripped metal with continuous identification markings on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and exact dimensions. Markings are required to be legible, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are permitted for bars, tubes, and shapes under 0.250 inches in nominal OD, while tags are acceptable for wire. A complete Certificate of Quality Compliance, or mill certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement constitutes a non-compliant bid with potential criminal penalties. Packaging and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and ASTM A700, with special codes Z and ZZ for preservation and labeling. All items must be shipped in full-foot increments only, and shipments must exclude parcel post, using instead the fastest traceable freight method to the designated Puget Sound Naval Shipyard address. The contract is a firm-fixed-price agreement with zero variance allowance, destination inspection and acceptance, and FOB origin terms. Delivery is required within 30 days after award, and all technical data, including the CDRL-METALSCERT, must align with DLA’s Master List of Technical and Quality Requirements. Failure to meet any specification, including packaging, marking, or material certification, is grounds for rejection.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M0-26-T-031K
This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, with a unit of issue of 1 RO equaling 108 feet, for a total quantity of 1,200 ROs. The item is classified as a commercial item and carries a shelf life of 12 months from manufacture, non-extendable, unless stored under controlled conditions of 50°F to 80°F and less than 75% relative humidity, in which case it may be inspected and re-certified up to a maximum of five years. It is designated as hazardous under HMIC code P, requiring full compliance with Safety Data Sheet (SDS) submission standards including hazard labels and a completed transmittal form to dscrchempol@dla.mil. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129R, with palletization conforming to DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise directed; unspecified attributes are treated as major. The tape must qualify under QPL-19166-30 revision 30 and comply with all referenced technical and quality requirements from the DLA Master List. Delivery is FOB origin with a five-day delivery window to Pearl Harbor Naval Shipyard, Hawaii, and requires full compliance with DLA procurement notes for transportation and freight. The NSN is 5970-00-612-8492 with a required delivery date of July 31, 2026, and all documentation must reflect current DLA unit of issue and marking specifications.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M0-26-T-031Q
This contract pertains to the procurement of one elbow hose, identified by NSN 4730016175913 and part number FS2702-12-12-FG from Brennan Industries, with a total quantity of one unit. The item is designated as a critical application component, and all materials must strictly comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any alternative substitutes must be pre-approved unless already authorized under the specifications. Delivery is required within five days of contract award, with FOB origin terms, no variance in quantity allowed, and inspection and acceptance occurring at the destination. Packaging must adhere to DLA’s packaging requirements, including palletization and labeling per MIL-STD-129, with unit of issue and quantity per unit pack exactly as specified. Shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery point at 547 Philadelphia Avenue, Reading, PA, under RDD/ NMCS shipment directives. The contract number is SPE7M0-26-T-031Q, with a required delivery date of July 15, 2026, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 332919 and is procured by the Department of Defense through the Maritime Supply Chain ESOc Buys office.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE7M0-26-T-031L
The contract pertains to the procurement of 8 machine bolts, identified by NSN 5306-01-507-7094 and part number 60-01-3745A, issued under solicitation SPE7M0-26-T-031L by the Department of Defense’s Maritime Supply Chain ESOC. Delivery is required within five days of award, FOB origin, with strict zero variance in quantity and inspection and acceptance occurring at the destination. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards, including ASTM D3951 and MIL-STD-129 for packaging and marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The bolts must be physically marked per DLA requirements and packaged per RP001 with palletization adhering to DLA packaging directives. Delivery must be shipped via traceable freight to the Puget Sound Naval Shipyard in Bremerton, WA, with parcel post explicitly prohibited. The required delivery date is July 31, 2026, and the contract mandates full adherence to configuration change management and variance procedures. The supplier is identified as Electric Boat Corp or BEK, Inc., both listed under the same part number.
Nonferrous Forging

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M0-26-T-031N
This contract is for the procurement of one electrical contact component, identified by part number 3RT2036-1AN20 and NSN 5999017312005, manufactured by SIEMENS INDUSTRY, INC. The requirement is issued under solicitation SPE7M0-26-T-031N with a firm delivery deadline of five days after award and delivery must be FOB origin. The quantity is fixed at one unit with no tolerance for variance. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129 standards, with packaging codes and methods specified including preservative method 41, dry packaging, and D3 unit container with E5 intermediate container. The item must be palletized according to DLA packaging requirements and shipped via traceable freight methods—parcel post is prohibited. The delivery and freight address is Fort Stewart, Georgia, with the same recipient for mark for instructions. A technical and quality compliance requirement is incorporated by reference from the DLA Master List, and all supplies must comply with government identification removal protocols and physical marking standards. The contract includes government-only administrative codes and indicates an original required delivery date of June 10, 2026, though no ship date is specified. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under a federal procurement framework managed by the Department of Defense and the Maritime Supply Chain ESOC.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
BEARING, STAVE SHAPED
Solicitation # SPE7M0-26-Q-1149
The contract specifies the procurement of 24 stave bearings, Class 3, Size No. 9, 1/16 inch oversize, 30 inches long, designed for use as an aft stern tube bearing assembly and manufactured to MIL-DTL-17901C with compliance to MIL-STD-129R and MIL-STD-2073-1E. Each stave is individually packaged in a unit package with no preservative required, wrapped in opaque or kraft paper to shield from sunlight, and enclosed in a weather-resistant single-wall fiberboard container with glued seams—no staples allowed. All units are overpacked in overseas-grade wooden boxes to ensure protection during transit and storage. Strict packaging rules prohibit bulk packaging, metal strapping directly on the staves, and any labeling on bare surfaces. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 180 months and falls under the DLA Master List of Technical and Quality Requirements. The procurement prohibits ozone-depleting chemicals and mercury-containing compounds, with limited exceptions for specific functional uses mandated by NAVSEA. The delivery is FOB origin with a 30-day lead time, to be inspected and accepted at destination. The required sampling method follows MIL-STD-1916 or ASQ SPE7M0-26-Q-1149 with zero non-conformances permitted unless otherwise specified. Special marking “DO NOT BEND” must be applied to all unit containers, and shelf-life dates are to be indicated. The end user is the Egyptian Navy, with shipments routed through Amentum Warehouse in Fredericksburg, VA, and ultimately delivered to Ras El Tin, Alexandria. The contract mandates full and open competition and requires all technical and quality standards referenced from DLA’s eProcurement portal to be strictly adhered to. Substitutions for restricted materials require prior approval, and deviations must be formally requested through an Engineering Change Proposal. The item is identified by NSN 2010-01-209-9650 and is subject to a zero variance in quantity with delivery scheduled for early 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 331221
New
DIBBS
STRIP, METAL
Solicitation # SPE7M0-26-Q-1148
The contract specifies the procurement of low-carbon cold-rolled steel strip measuring 0.0625 inches thick, 2 inches wide, and lengths between 96 and 192 inches, with a weight of 0.425 pounds per foot, as identified by NSN 9515-00-516-5739. The material must conform to ASTM A109/A109M and SAE AMS2807C standards, with temper 4 and finish 2, and must be supplied in whole-foot increments only. All units require continuous identification markings including the contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and exact dimensions. Markings must be applied via stenciling or stamping, be legible, waterproof, and non-contaminating, while adhesive labels are permitted for narrow strips under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The contract mandates strict compliance with the Qualified Suppliers List for Distributors (QSLD), restricting award eligibility exclusively to suppliers listed on the official DLA QSLD roster; any deviation or use of non-approved sources constitutes an unauthorized substitution and may result in criminal penalties. Packaging must follow MIL-STD-2073-1E and ASTM A700 specifications, with special codes Z and ZZ applied for preservation and marking as required. Markings must adhere to MIL-STD-129, including dual-unit quantities where applicable, and all shipments must avoid parcel post, instead using traceable freight methods. The delivery point is Puget Sound Naval Shipyard, with a firm fixed price and zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the material must be delivered within 30 days after award. The contract also designates this item as a critical application, with a specific requirement for eight-foot continuous lengths for use on the USS Abraham Lincoln (CVN-72).
Rolled Steel Shape Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M0-26-T-031M
The contract is for one unit of an elbow fitting, specifically a pipe to tube component identified by NSN 4730-01-299-7309 and part number 16-12CTX-B from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-031M. Delivery is required within five days of award, with shipment to be made FOB origin in accordance with strict packaging standards including ASTM D3951 and MIL-STD-129 labeling, while adhering to DLA’s Master List of Technical and Quality Requirements which override any conflicting specifications. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly permitted by specification. Packaging must comply with DLA’s procurement guidelines including palletization standards, and the unit of issue is a single ea with no tolerance for quantity variance. Delivery destination is the Marine Wing Support Squadron 272 in Jacksonville, North Carolina, with all shipments required to use the fastest traceable transport method, explicitly prohibiting parcel post. The original required delivery date is July 24, 2026, and all government-specific identifiers, including the project code TP 1 and freight tracking number, must be accurately applied to the shipment.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
NUT, HOSE COUPLING
Solicitation # SPE7M0-26-T-031P
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Material Compliance & PackagingThe contract requires strict adherence to hazardous material handling protocols for capacitors, mandating accurate labeling, secure packaging, and comprehensive documentation to meet both OSHA and military standards. All compliance activities must ensure the safe identification and transport of hazardous components, with no room for deviation from established regulatory frameworks. The work is performed under a subcontract arrangement tied to the Department of Defense, specifically managed by the MARITIME SUPPLY CHAIN ESOC BUYS entity, with performance obligations centered in Norfolk, Virginia, at the ZIP code 23511-4397. Responses to this solicitation must be submitted by August 17, 2026, and the procurement falls under NAICS code 562910, indicating it relates to hazardous waste collection and treatment services. There is no set-aside designation specified, meaning all eligible contractors may compete. The posting date is August 4, 2026, suggesting a brief but critical window for qualified vendors to prepare and submit their proposals. Failure to meet the specified compliance requirements could result in rejection or non-performance penalties, making precision in labeling and documentation non-negotiable elements of fulfillment.
Remediation Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
Procurement of Fixed Ceramic Dielectric CapacitorThe contract pertains to the procurement of a single fixed ceramic dielectric capacitor intended for deployment in defense and aerospace applications, requiring strict adherence to military specifications and packaging standards to ensure reliability under extreme operational conditions. This is a subcontract under the Department of Defense, managed by the MARITIME SUPPLY CHAIN ESOC BUYS office, with performance obligations centered in Norfolk, Virginia, at the zip code 23511-4397. The item falls under NAICS code 334416, classifying it within the electronic component manufacturing sector, and must meet all relevant defense-grade quality and testing requirements. Bidding is open under a solicitation process with a posted date of August 4, 2026, and responses must be submitted no later than August 17, 2026. The contract does not include a set-aside designation, meaning it is open to all eligible contractors without restrictions based on business size or socioeconomic status. There is no designated point of contact listed, and all inquiries should be directed through the official DIBBS platform using the provided uiLink. The capacitor must be fully compliant with applicable military standards for performance, environmental resilience, and packaging to ensure seamless integration into critical systems.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 483212
New
DIBBS
Expedited International Freight and Logistics (FOB Origin to Japan)
Inland Water Passenger Transportation

POSTED

1 day ago

DEADLINE

in 12 days
View Details