Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Corrosion-Resistant Cold-Finished Steel Bar Supply

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of corrosion-resistant, cold-finished, annealed round steel bars with a diameter of three inches and lengths between ten and twelve feet, all of which must comply with rigorous military packaging, marking, and inspection standards to ensure uniformity and readiness for defense applications. The material specification emphasizes durability under harsh conditions, with the annealing process ensuring optimal mechanical properties and the cold-finishing process delivering precise dimensional tolerance and surface finish critical for high-performance environments. This subcontract is issued under the NAICS code 331110, indicating the industrial classification of iron and steel mills and ferroalloy manufacturing, and is managed by the Nuclear Reactor Program within the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, with the contract available for review via the DIBBS platform at the provided link. All bidders must adhere to federal defense procurement protocols, including full compliance with military-grade quality control and documentation requirements.

General Info

Supply of 3-inch cold-finished annealed steel bars, 10–12 ft, per military specs for defense use in New Cumberland, PA.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of corrosion-resistant, cold-finished, annealed, round steel bars (3in diameter, 10–12 ft length) meeting military packaging, marking, and inspection standards.

Similar Contracts

Same NAICS industry code

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Defense Logistics Agency

POSTED

DEADLINE

SHACKLEThe contract solicits 34 packages of zinc-coated chain shackles, each containing two units, under NSN 4030-00-369-3894, with delivery required to the DLA Distribution facility in New Cumberland, Pennsylvania, no later than March 28, 2027. The item is manufactured via a forging process and must conform to the Technical Data Package Rev A Gen 1 and Quality Assurance Provision 13873, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-129 for marking and labeling, with palletization adhering to DLA Packaging Requirements for Procurement, and all items must be physically marked per RQ017. Delivery is FOB origin, with inspection and acceptance performed at the destination by the government, and payment must be processed exclusively through Wide Area WorkFlow. The contract includes mandatory clauses for cybersecurity compliance under NIST SP 800-171, safeguarding defense information, reporting safety issues, prohibiting hexavalent chromium and hazardous materials, and ensuring transportation via U.S.-flag vessels. Offerors must hold valid UEI and CAGE codes, represent their small business status accurately, and submit quotations electronically via DIBBS by July 24, 2026, with no pricing data provided in the solicitation, making the contract value unconfirmed.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Specialty Metals and Raw Materials

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Raw Materials or SubcomponentsThe contract calls for the supply of raw metal stock, seals, and other subcomponents essential to the manufacturing of brake piston assemblies, with specific materials including high-strength steel and elastomers. This subcontract is issued under the NAICS code 331110, indicating its alignment with primary metal manufacturing, and is managed by the Fluid Handling Division within the Department of Defense. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, leaving a narrow window for qualified suppliers to submit proposals. Performance of the contract is designated to occur at Hill Air Force Base, with a specified zip code of 84056-5734, indicating the location where materials will be delivered and integrated into the assembly process. The requirement is focused on precision-engineered components critical to braking system functionality, necessitating adherence to strict material specifications and quality standards to ensure operational reliability in defense applications.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Material (Alloy Steel) SupplyThe contract calls for the supply of certified alloy steel billet or bar stock that meets strict military specifications, intended for use in the forging of critical shaft components. The material must conform to defined quality and performance standards required for high-stress applications, ensuring reliability and durability in defense-related equipment. This is a subcontract under a Women-Owned Small Business Set-Aside, designated under NAICS code 331110, which restricts eligibility to qualified women-owned small businesses. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, and performance is expected to be carried out at a facility in Tracy, California, with a zip code of 95304-5000. The contracting activity is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office, and all submissions must be made through the official DIBBS platform as specified in the provided link.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supplier of Raw Materials & Specialty ComponentsThe contract solicits the supply of high-grade alloy steels and specialty components required for the production of military-grade bearings, strictly adhering to specified defense standards. All materials must meet exacting technical and quality benchmarks to ensure performance under extreme operational conditions, with compliance to military specifications being non-negotiable. The work is intended for a subcontract arrangement under the ASC COMMODITIES DIVISION of the Department of Defense, with performance required at the location in Tracy, California, 95304-5000. The North American Industry Classification System code 331110 identifies the sector as iron and steel mill and steel product manufacturing, aligning the supplier’s expertise with the nature of the materials being procured. Interested parties must submit responses by the deadline of July 28, 2026, with the solicitation formally posted on July 23, 2026, providing a five-day window for proposal submission through the designated DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Domestic Raw Material Supply (Iron/Steel Casting Stock)The contract requires the supply of domestic-grade iron or steel casting material suitable for use in the production of threaded pipe plugs, with all materials must be accompanied by certified mill test reports to verify composition and quality. The material must fully comply with the Buy American Act, ensuring that all production, processing, and assembly occur within the United States using domestically sourced components. The intended application is critical to defense-related fluid handling systems, necessitating strict adherence to material specifications and traceability standards. The solicitation is issued under the NAICS code 331110, indicating a focus on iron and steel foundries, and is classified as a subcontract opportunity managed by the Fluid Handling Division of the Department of Defense. Proposals are due by August 3, 2026, and performance must be carried out at the specified location in Barstow, California, with ZIP code 92311-5014. The contract emphasizes sourcing from U.S.-based suppliers and mandates full compliance with federal acquisition regulations regarding domestic content, with no set-aside designation specified. All submissions must demonstrate proven capability to deliver consistent, certified casting stock matching the technical and regulatory requirements outlined for defense-related manufacturing.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Metal Material Supply for Defense ComponentThe contract involves the supply of raw iron, steel, or alloy materials necessary for the fabrication of military-grade metal components, specifically the ANGLE RAMP FLOOR, which is critical for defense applications. The materials must meet stringent quality and specification standards to ensure structural integrity and operational reliability in military environments. The solicitation is issued as a subcontract under NAICS code 331110, indicating the focus on iron and steel mills and ferroalloy manufacturing, and is managed by the DLA Fleet Readiness Center under the Department of Defense. Performance of the contract will be executed at Cherry Point, North Carolina, with the zip code 28533-0021, which serves as the designated place of performance for delivery and inspection. The solicitation was posted on July 23, 2026, and responses must be submitted by July 31, 2026, creating a six-day window for qualified suppliers to submit proposals. No set-aside provisions are specified, meaning the opportunity is open to all eligible contractors without restrictions based on business size, ownership, or other categories. The absence of a point of contact in the data means vendors are advised to rely on the provided DIBBS link for submission details and procedural guidance. Given the nature of the end-use component, compliance with defense material specifications, traceability of raw material origins, and adherence to applicable military standards are critical requirements for any prospective supplier.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Specialty Metals Supply for Defense ComponentsThe contract involves the supply of specialty metals, including steel and titanium alloys, that meet DFARS compliance requirements for use in military cylinder and piston assemblies. Full origin traceability is mandatory, ensuring all materials are sourced and processed in accordance with U.S. defense regulations to guarantee quality and national security standards. The materials must be suitable for high-performance defense applications where structural integrity and material purity are critical. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with a posted date of July 23, 2026, and a response deadline of August 24, 2026. The NAICS code 331110 indicates the work falls under iron and steel mills and ferroalloy manufacturing, aligning with the production of primary metal products. All performance is tied to defense-related components, and while no specific location is listed for performance or delivery, compliance with federal defense procurement rules governs every aspect of the supply chain, from sourcing to final delivery.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supplier of Raw Materials – Aerospace-Grade Alloy StockThe contract calls for the supply of traceable, certified aerospace-grade alloy stock, including corrosion-resistant steel or titanium, strictly compliant with NAS1829 and MIL-SPEC standards to support the manufacturing of standoff components. All materials must be fully documented with traceability to raw material origins and certified to meet rigorous aerospace performance and quality benchmarks, ensuring suitability for high-stress, mission-critical applications. The material must be delivered in accordance with defined metallurgical specifications, dimensional tolerances, and inspection requirements to guarantee consistency and reliability in production. This is a subcontract under the Department of Defense’s LAND SUPPLY CHAIN, with performance required at Jacksonville, Florida, specifically at the zip code 32212-0103. The solicitation, identified under NAICS code 331110, is open for responses until August 3, 2026, and bidders must demonstrate proven capability in producing and certifying aerospace-grade alloys to federal military standards. While no set-aside designation is specified, interested parties are expected to provide detailed quality control documentation, certification records, and evidence of prior compliance with similar stringent aerospace material supply requirements. All submissions must be made via the DIBBS portal linked in the posting.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of High-Strength Alloy or Steel Raw MaterialsThe contract seeks the supply of certified alloy steel bar stock or forgings that meet precise military material specifications, requiring complete traceability from raw material sources through final production, along with comprehensive test documentation to verify compliance. All materials must adhere to stringent quality standards appropriate for defense applications, ensuring reliability and performance under demanding operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the Small Business Administration, and is classified under NAICS code 331110 for iron and steel mills and ferroalloy manufacturing. The opportunity was posted on July 23, 2026, with responses due by August 7, 2026, and is managed by the Strategic Acq Program Directorate within the Department of Defense. While specific performance locations and point of contact details are not provided, the procurement is accessible through the DIBBS platform, and all proposers must ensure full compliance with military material requirements and documentation protocols. The contract emphasizes accountability, quality assurance, and small business participation as core objectives.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Specialty Metal and Alloy Sourcing for BearingsThe contract seeks the supply of specialty metals and high-performance alloys, including chrome steel and stainless steel, specifically for use in the precision manufacturing of bearings. All materials must comply with DFARS regulations requiring domestic sourcing and full traceability to ensure origin and quality. The procurement is structured as a subcontract under the Department of Defense, managed by DLA Aviation, with a North American Industry Classification System code of 331110, indicating alignment with steel milling and rolling operations. The solicitation was posted on July 23, 2026, and responses are due by August 7, 2026, at 9:00 PM Eastern Time, making timing and adherence to compliance deadlines critical for eligibility. The place of performance and specific delivery locations are not detailed, though the materials must support U.S. defense-related bearing production. Suppliers must be prepared to demonstrate complete material lineage and domestic origin documentation to meet federal sourcing mandates.

POSTED

DEADLINE

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

ELECTRONIC MODULE, STANThis contract is for the procurement of two electronic modules, standardized under NSN 5963-01-101-6942 and part number M28787/278-1, from approved suppliers Alektronics Inc. and Indal Technologies Inc. The item is classified as a critical application and is subject to stringent Defense Logistics Agency specifications, including mandatory compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The module is highly sensitive to electrostatic discharge and electromagnetic interference, necessitating DOD-qualified protective packaging materials per MIL-PRF-81705, specifically Type I barrier material for both ESD and EMI protection, with Type III wrap required if cushioning is not otherwise specified. All packaging materials must originate from manufacturers listed on the QPL-81705, and handling must occur at approved field force protective workstations. The item is also prohibited from contact with mercury or mercury-containing compounds except for specified exceptions such as batteries, fluorescent lights, sensors, and weapon systems, which must include a secondary containment boundary. The contract requires delivery within 165 days to the specified destination in Tracy, California, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance both occur at the destination, and the supplier must ensure all documentation and packaging meet exacting technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the solicitation is a total small business set-aside under NAICS code 334413. The offer must include any necessary packaging data if ESD/EMI protection is not explicitly stated in the preservation method code. The contract includes detailed transportation instructions tied to DLAD procedural notes and is issued under solicitation SPE7M2-26-T-5758, with a response deadline in August 2026 and a required ship date of January 19, 2027.

Semiconductor and Related Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

TRANSFORMER, POWERThis contract is for the procurement of a single power transformer identified by NSN 5950-01-438-0097, with delivery required within 165 days from the contract award date and a final delivery deadline of January 19, 2027. The item is classified as a critical application component subject to strict quality and traceability standards, requiring all constituent parts to originate exclusively from sources listed on the qualified products list or qualified manufacturers list as defined by applicable MIL-PRF-27/320C and MIL-PRF-27G specifications. The transformer must comply with DLA’s technical and quality requirements referenced via R and I numbers from the DLA Master List, including traceability documentation retention per DLAD Procurement Note C03, and adherence to strict configuration change management procedures. Mercury and mercury-containing compounds are prohibited in or on the component except for specified functional uses in batteries, instruments, or sensors approved by NAVSEA, with portable devices containing mercury requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The item must meet NAVAIR aircraft launch and recovery equipment traceability standards, with all bare metal surfaces marked with the contract number, NAWC CAGE, and part number as directed by associated technical drawings. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging guidelines and no special marking codes applied. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination point, and no variance in quantity is permitted. The contract is issued under solicitation SPE7M2-26-T-5764 with a response deadline in August 2026 and requires compliance with DoD unit of issue standards and transportation requirements outlined in DLAD Procurement Notes C19 and C20.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 13 hours ago

DEADLINE

ROLLER, ROLLER FAIRLThis contract specifies the procurement of a ROLLER, ROLLER FAIRLEAD identified by NSN 3815-01-341-5035 and part number 6550C028-1 under solicitation SPE7M2-26-T-5766, with a delivery requirement of 61 units to be shipped FOB origin within 178 days from the contract award. All items must comply with stringent DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, including contract number, NAWC CAGE, and part number markings unless superseded by technical drawings. Quality compliance is governed by QAP EQ003 and referenced technical requirements from the DLA Master List, with inspection and acceptance performed at origin using zero-defect sampling per MIL-STD-1916 or ASQ H1331 unless otherwise directed, assigning verification levels VII, IV, and II for critical, major, and minor attributes respectively. The material is designated as a critical application item and must adhere to NAVAIR aircraft launch and recovery equipment traceability standards, with strict prohibitions against intentional addition of mercury or mercury-containing compounds except in specified functional applications such as batteries, fluorescent lamps, sensors, or chemical reagents, which must include secondary containment as per NAVSEA 5100-003D. The delivery destination is clearly defined as Tracy, CA, with packaging and palletization governed by DLA standards and transportation logistics outlined in DLAD proc notes C19 and C20. The contract enforces a zero variance in quantity, with no tolerance for over or under shipment, and requires full conformity to all referenced technical data packages and quality assurance provisions.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

SWITCH, TOGGLEThe contract centers on the procurement of a SWITCH, TOGGLE item identified by NSN 5930008786734 and part number MS24659-22D, with technical compliance governed by MIL-DTL-3950L Rev L and NAS MS24659J Rev J, both effective as of 2022 and 2024 respectively. Full and open competition applies, and all supplies must adhere to DLA’s Master List of Technical and Quality Requirements, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses in specific components such as batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents as defined by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The item is classified as a critical application item, and packaging must comply with RP001 DLA Packaging Requirements, including palletization standards and hazard material shipping protocols under IP025. Two delivery lines are specified: one for five units at $5.00 each and another for 68 units at $68.00 each, totaling 73 units, with delivery required within 11 days FOB origin to designated DLA distribution centers in Albany, Georgia, and New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, with zero variance allowed on quantity. The need ship dates are August 18, 2026, and September 7, 2027, though the original required delivery date is March 20, 2027. All documentation references DoD unit of issue standards via a published DLA Excel file, and the solicitation number is SPE7M2-26-T-5761, issued under the Department of Defense with a response deadline of August 6, 2026.

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

WASHER, FLATThis contract specifies the procurement of flat washers identified by NSN 5310-01-390-5131 and part number NAS1149F0432P, with a total quantity of 1,385 units distributed across three line items, all to be delivered FOB origin within 86 days of ordering. The item is classified as a commercial item and must comply with stringent technical and quality requirements referenced from the DLA Master List, including MIL-STD-130N for identification marking, MIL-STD-129 for packaging labeling, and MIL-STD-2073-1E for preparation for shipment. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are subject to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Thread dimensions for class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small threads. The washer is designated a critical application item requiring critical item source inspection. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specified functional uses such as batteries, instruments, or sensors as outlined in NAVSEA standards. Packaging must meet DLA’s specific requirements including palletization, unit containment, and special marking code 00 indicating no special markings. Shipments are directed to three distinct DLA distribution facilities in Oklahoma, California, and Pennsylvania, with required delivery dates spanning from early 2026 through early 2027. The contract also enforces Cybersecurity Maturity Model Certification Level 2 self-assessment and incorporates Covered Defense Information requirements, ensuring compliance with DoD cybersecurity protocols. All units of issue comply with DoD standards and are cross-referenced to ANSI X12 equivalents.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

BOLT, SPECIALThis contract pertains to the procurement of a specialized bolt designated as NSN 5306-01-111-6010 for use in Aircraft Launch and Recovery Equipment (ALRE), classified as a Critical Application Item requiring strict traceability and source approval. The item must be manufactured by an approved source as determined by the Naval Air Warfare Center Aircraft Division at Lakehurst, with offerors required to submit documentation such as a source approval letter from NAVICP or equivalent evidence of compliance. Serialization is mandatory for both the part and its packaging to ensure full traceability throughout its lifecycle, including scrappage, and any re-branding that obscures original OEM markings is prohibited. The contractor must adhere to DLA packaging standards (MIL-STD-2073-1E and RP001), mark all units per MIL-STD-129 with NSN, contract number, lot and serial numbers, contractor and manufacturer CAGE codes, and part number, and comply with configuration change management and inspection protocols at origin. All supplies must meet SAE AS9100 quality requirements and NAVAIR ALRE traceability standards, with technical and quality requirements referenced from the DLA Master List, and documented through specified CDRLs including First Article Testing, Production Test and Inspection Reports, and Certificate of Quality Compliance. Mercury and ozone-depleting chemicals are strictly prohibited unless explicitly exempted, and all bare items must be marked per technical drawings with the contract number, NAWC CAGE code, and part number. The contract mandates a firm fixed price with no tolerance for quantity variance, a delivery deadline of 729 days after delivery order, and inspection and acceptance at origin. A small business set-aside applies, and the supplier must comply with all applicable DLA clauses, including those governing data handling under RD003, while explicitly excluding the Certificate of Conformance clause. The end-user requires the item for use by the Nuclear Reactor Program with a scheduled ship date of July 20, 2028.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

ANODE ASSYThe contract pertains to the procurement of an ANODE ASSEMBLY with NSN 1710-00-573-7197, requiring 377 units under purchase request 7017601770, with delivery due within 144 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA standards, and the item is subject to Covered Defense Information regulations. The supplier must be certified at CMMC Level 2 by an accredited third-party assessor. Any configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons even within the United States, with DFARS 252.225-7048 governing compliance. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DLA-mandated training and questionnaire, and received formal approval. The procurement is issued under solicitation SPE7M2-26-T-5765, posted July 26, 2026, with responses due August 6, 2026, classified under NAICS 336413, performed in San Diego, California, and managed by the Department of Defense’s Nuclear Reactor Program with primary point of contact Alisha Blanton.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETALThis contract specifies the procurement of a nonmetallic hose assembly identified by NSN 4720-00-204-2092, with a quantity of 39 units to be delivered FOB origin within 309 days of contract award, targeting a shipment date of June 12, 2027, and an original delivery deadline of June 23, 2027. The item is classified as a Critical Application Item and must comply with stringent technical and quality standards, including SAE AS629D and SAE AS604, and must be sourced exclusively from manufacturers or assemblers listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List. Supply chain traceability is mandatory under DLA Procurement Note C03, and all components must be permanently marked with the contract number, NAWC CAGE, and part number per technical data drawings, with marking conforming to MIL-STD-129 and MIL-STD-130N for U.S. military property identification. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with shelf-life requirements enforced via a non-extendable 120-month expiration period, clearly marked on all packaging levels. The product is prohibited from containing ozone-depleting chemicals, mercury or mercury-containing compounds except in narrowly defined functional exceptions approved by NAVSEA, and no mercury may be used in preservation, packaging, or marking. Cybersecurity compliance is required at CMMC Level 2, and the contractor must retain all supply chain documentation. The item is subject to inspection and acceptance at destination, with zero variance allowed in quantity, and all data must align with the referenced technical documentation and DLA master requirements, which are incorporated by reference and continuously updated per applicable revision dates.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONNECTOR BODY, RECEPTAThis contract specifies the procurement of 422 electrical connector bodies, receptacles, identified by NSN 5935-01-231-8432, for delivery to Robins Air Force Base, Georgia, with a required delivery date of March 20, 2027, and a lead time of 168 days. The item is designated as a commercial item and must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging must be palletized in accordance with DLA guidelines, and the units must be shipped FOB origin with zero variance in quantity. The contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and approved chemical reagents; portable devices containing mercury must include a secondary containment and meet shock-proof standards per NAVSEA 5100-003D. The connector is classified as a critical application item and is sourced from approved manufacturers including Boeing, Lockheed Martin, Northrop Grumman, L3Harris, Honeywell, and TE Connectivity, each using their respective part numbers. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and the controlling revision is determined based on the solicitation issue date. Transportation and shipping instructions follow DLAD Proc Notes C19 and C20, with the final delivery point specified as DLA Distribution Warner Robbins. The solicitation was issued under contract number SPE7M2-26-T-5763 with a response deadline of August 6, 2026, and is managed by the Department of Defense under NAICS code 334417.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRIThis contract is for the procurement of electrical plug connectors, identified by NSN 5935-01-092-1035 and part number MS3476W14-5S, meeting the technical standards of MIL-DTL-26482J and MS3476G. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935, and must be marked with an acceptable manufacturer part number listed on the QPL at the time of award. Each package must include a notice instructing the user to obtain a backsHELL separately, specifying the approved NSNs and part numbers for straight and right-angle cable clamp styles. The connector is designated as a critical application item, and no intentional addition or direct contact with mercury or mercury compounds is permitted except for specific exempted applications such as batteries, lighting, instruments, sensors, or weapon systems, with additional containment requirements for portable devices containing mercury. The contract specifies three separate delivery lines totaling 528 units, each with identical technical and packaging requirements under MIL-STD-2073-1E and MIL-STD-129 marking standards, using unit packaging code U and palletization per DLA guidelines. Deliveries are FOB origin with zero quantity variance allowed, inspected and accepted at the destination. Shipments must be sent to three different DLA distribution centers located at Tinker AFB, Robins AFB, and New Cumberland, with distinct need ship dates ranging from mid-2026 to mid-2027 and a 77-day delivery window. The contract mandates full and open competition, prohibits hazardous material exceptions beyond defined exemptions, and references the DLA Master List of Technical and Quality Requirements for all incorporated specifications, with all packaging, labeling, and shipping strictly aligned with DLA procurement directives and transportation protocols.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

COMPUTER SUBASSEMBLThis contract specifies the procurement of 92 units of a computer subassembly identified by NSN 7050-01-505-2960 under solicitation SPE7M2-26-Q-0680, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 150 days after order date, with inspection and acceptance occurring at the destination. The item is subject to stringent packaging requirements per MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, and must be marked in accordance with MIL-STD-129 without special marking codes. Mercury and mercury-containing compounds are strictly prohibited in incidental contact with the hardware, except for exempted functional uses such as specified batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices requiring shock-proof construction and secondary containment as defined by NAVSEA 5100-003D. The contract excludes any government identification from non-accepted supplies and is classified as a critical application item with two specific part numbers identified. The delivery point is the DLA Distribution San Joaquin warehouse in Tracy, California, and the item is subject to DLA transportation procedures C19 and C20. The contract is a total small business set-aside under NAICS code 334111, with performance under the Department of Defense’s Nuclear Reactor Program and a response deadline of August 6, 2026.

Electronic Computer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Locking Devices for Circuit BreakersThe contract pertains to the manufacture and delivery of three locking devices for circuit breakers identified by NSN 5925-01-453-6631, specifically designed for use in nuclear reactor program applications. These devices must meet rigorous technical specifications and comply with all Department of Defense standards for packaging, hazard labeling, and quality assurance to ensure operational integrity and safety in sensitive nuclear environments. The work is being procured as a subcontract under the NUCLEAR REACTOR PROGRAM, part of the Department of Defense, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 24, 2026, with a deadline for responses set for July 29, 2026, indicating a tightly controlled procurement timeline. The North American Industry Classification System code 335313 applies, referencing the manufacturing of electrical equipment for power distribution. The contract emphasizes strict adherence to defense logistics agency requirements, ensuring that the locking devices are not only functionally suitable for high-stakes nuclear applications but also properly documented and labeled to meet federal safety and handling protocols.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE