Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Corrosion-Resistant Packaging and Preservation

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply and application of vapor corrosion inhibitor (VCI) bags, desiccants, and barrier films for the preservation of sensitive electronic components within defense kits, adhering strictly to military preservation standards. The work requires compliance with technical specifications for corrosion prevention, ensuring components remain protected during storage and transit under adverse environmental conditions. Materials must meet specified performance thresholds for moisture barrier integrity, VCI emission rates, and longevity of protective properties, all aligned with current defense packaging protocols. This is a total small business set-aside under NAICS code 323113, meaning only small businesses are eligible to submit proposals. The opportunity is issued as a subcontract by the Maritime Supply Chain organization under the Department of Defense, with performance required at Tracy, California, ZIP 95304-5000. Proposals are due by August 13, 2026, and the solicitation was posted on July 29, 2026. All submissions must demonstrate the capability to deliver certified packaging solutions in full compliance with military requirements and timelines.

General Info

Small business set-aside for VCI bags, desiccants, and barrier films to protect defense electronics per military standards in Tracy, CA.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

323113 - Commercial Screen PrintingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and application of VCI bags, desiccants, and barrier films to preserve sensitive electronic components in defense kits per military standards.

Similar Contracts

Same NAICS industry code

Label Manufacturing and Hazardous Material ComplianceThe contract entails the manufacture and supply of 18,000 hazardous material labels that must fully comply with OSHA and MIL-STD-129 standards, ensuring proper identification, hazard communication, and military labeling requirements are met. Alongside the physical labels, the contractor is responsible for preparing Safety Data Sheets and securing formal approval of all label designs prior to any delivery, guaranteeing regulatory adherence and accuracy in hazardous material documentation. The work is to be performed under a subcontract arrangement issued by the Defense Logistics Agency on behalf of the Department of Defense, with performance focused on a military mail address classified under FPO 96643. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, under the NAICS code 323113 which pertains to commercial printing services. All deliverables must be completed in full compliance with federal specifications and verified through prior approval processes before shipment.

Defense Logistics Agency

POSTED

DEADLINE

Military Packaging, Marking, and Labeling ServicesThe contract requires the provision of military packaging, marking, and labeling services fully compliant with MIL-STD-129 standards, including the application of serialized container identifiers, barcoding systems, and proper hazardous material identification to ensure traceability and safety throughout the defense logistics chain. All work must meet strict federal requirements for durability, legibility, and information accuracy, with special attention to the handling and labeling of dangerous goods. Performances are to be executed at the specified location in San Diego, California, with a response deadline of August 7, 2026, and the procurement is structured as a subcontract under NAICS code 323113. The awarding agency is the Department of Defense, specifically DLA Fleet Readiness Southwest, and participation is open without set-aside classification. All vendors must be prepared to deliver fully compliant packaging solutions that integrate seamlessly into military supply operations.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

DEADLINE

MIL-STD-129 Marking, Labeling & BarcodingThe contract requires strict adherence to MIL-STD-129 standards for the marking and labeling of military items, ensuring full traceability through the use of Code 39 or PDF417 barcodes. These markings must be applied accurately to meet Department of Defense WAWF receiving procedures, guaranteeing seamless inventory management and logistical compliance across the supply chain. All labeling efforts must align with DoD requirements for item identification, packaging, and documentation to facilitate efficient receipt, storage, and distribution. This subcontract, issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, is designated under NAICS code 323113 and pertains to work performed at the New Cumberland location with zip code 17070-5002. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. The contract does not specify a set-aside type or point of contact, and full compliance with the specified marking standards is mandatory to fulfill contract obligations and avoid rejection during DoD receiving operations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Medical Item Marking & Packaging ServicesThe contract requires the application of MMS No. 1-compliant labels and the execution of commercial packaging for medical items, with strict adherence to Defense Logistics Agency shipping and marking standards. All work must ensure that medical supplies are properly identified, labeled, and packaged to meet federal military logistics requirements, particularly for distribution through the Department of Defense supply chain. The performance location is designated as APO, ZIP 09604-6180, indicating operations are centered around military postal facilities, likely supporting overseas deployments or military personnel. This subcontract, posted on July 29, 2026, with a response deadline of August 4, 2026, falls under NAICS code 323113 for printing and related support activities, reflecting the specialized nature of labeling and packaging services. The contracting entity is the Medical Supply Chain MD SURG FSF under the Department of Defense, underscoring the critical role this work plays in sustaining medical readiness. Compliance with DLA standards is non-negotiable, and all bidders must demonstrate capability to handle sensitive medical materials with precision, accuracy, and timeliness to ensure seamless integration into military logistics systems.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military-Grade Packaging ServicesThe contract requires specialized preservation, drying, and packaging services for precision components in strict compliance with MIL-STD-2073-1E standards to maintain operational integrity throughout military logistics and extended storage periods. All work must meet stringent defense-grade requirements for environmental protection, corrosion prevention, and long-term readiness, ensuring components remain functional and uncontaminated under demanding conditions. The effort involves full adherence to military packaging protocols including material selection, labeling, sealing, and documentation procedures to support traceability and quality assurance across the supply chain. This is a subcontract opportunity under the Department of Defense’s ASC Commodities Division, with a NAICS code of 323113, indicating a focus on printing and related support activities adapted for defense packaging applications. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026. Performance location details are unspecified, but work is expected to align with Defense Logistics Agency standards and military logistics networks. Interested parties must submit proposals through the DIBBS system prior to the deadline, ensuring full responsiveness to technical, procedural, and regulatory demands outlined in the military standard.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Medical Product Packaging and Labeling ServicesThe contract seeks commercial packaging and labeling services for medical inhalers, requiring adherence to MIL-STD-2073-1E and the Medical Marking Standard No. 1 to ensure standardized, secure, and compliant handling of sensitive medical devices. All packaging must include sealed unit containers designed to maintain sterility and integrity throughout the supply chain, with labeling that meets exacting military and healthcare regulatory specifications. The work is designated as a subcontract under NAICS code 323113, targeting vendors capable of delivering precision packaging solutions for federally managed medical products. The opportunity is managed by the Department of Defense through the MEDICAL SUPPLY CHAIN PHARM FSA, with performance required at Fort Campbell, Tennessee, in ZIP code 42223-5000. Bidders must submit responses by August 4, 2026, following the solicitation posted on July 29, 2026. While no set-aside classification is specified, the contract emphasizes technical compliance, quality assurance, and reliability in handling regulated medical devices intended for military use. Access to full details is available through the provided DIBBS link.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Military Labeling and Marking (MIL-STD-129)The contract requires the application of durable, scannable military labeling in strict compliance with MIL-STD-129 standards, covering unit identification, barcoding, and mandatory hazardous material warnings for applicable items. All labels must be engineered for durability under harsh military conditions and fully compatible with standard scanning systems used across defense logistics networks. The work is to be performed at the specified location in Albany, Georgia, with a response deadline of August 6, 2026, and is classified as a subcontract under NAICS code 323113. The contract is issued by the ASC Commodities Division within the Department of Defense, and all deliverables must meet exacting government specifications to ensure interoperability and readiness across the supply chain.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Labeling ServicesThe contract requires specialized packaging and labeling of electronic components in strict compliance with military standards including MIL-STD-129, MIL-STD-2073-1E, and IPC/JEDEC J-STD-609 to ensure full traceability, proper hazard communication, and regulatory compliance. All work must meet exacting specifications for labeling, barcoding, container marking, and documentation to support the Department of Defense’s logistical and safety requirements. The services are intended for components designated for military use and must be performed under a subcontract arrangement with rigorous attention to detail and quality control. The solicitation is issued under NAICS code 323113 and is set for performance in Fort Campbell, Kentucky, with a zip code of 42223-5000. The opportunity was posted on July 29, 2026, and responses are due by August 10, 2026. The contracting office is the Active Devices Division under the Department of Defense, and while no set-aside type is specified, the work is exclusively for military-grade applications requiring certified packaging procedures. Full compliance with all referenced standards is mandatory for bid eligibility and contract performance.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires performance of preservation and packaging services strictly in accordance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all military equipment and supplies are protected for long-term storage and transport under harsh conditions. This includes the fabrication and sealing of unit containers and export-ready packaging designed to meet the rigorous durability, moisture resistance, and contamination control requirements of military logistics systems. All work must be executed to support the Department of Defense’s supply chain integrity, with final products prepared for deployment from the designated place of performance at Fort Bragg, North Carolina, 28310. This is a subcontract opportunity under NAICS code 323113, which pertains to printing and related support activities, though the core function here is specialized defense packaging. The solicitation was posted on July 29, 2026, with a firm response deadline of August 4, 2026, indicating a narrow window for qualified vendors to submit proposals. The contracting activity is managed by the Medical Supply Chain Pharm FSA within the Department of Defense, emphasizing the critical nature of packaging medical and pharmaceutical assets destined for military use. Compliance with federal military standards is non-negotiable, and contractors must demonstrate proven capability in handling sensitive, mission-critical items through certified packaging protocols.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Labeling and Marking Services (MIL-STD-129 Compliance)The contract requires full compliance with MIL-STD-129 for military labeling and marking, encompassing NSN tagging, hazard warnings, and shipment identifiers to ensure standardized identification and handling of defense-related cargo. All labeling must adhere to the strict visual and content specifications mandated by the standard, including durable materials, precise placement, and accurate barcoding to support logistics tracking across military supply chains. The work is classified as a subcontract under NAICS code 323113 and is issued by the Department of Defense’s Land Supply Chain unit, with performance expected to support defense logistics operations regardless of specific geographic location. Responses are due by August 10, 2026, and submissions must demonstrate proven expertise in military-grade labeling systems and the ability to meet stringent quality and compliance requirements. While no set-aside provisions are specified, bidders must be prepared to provide documentation of past performance with similar defense labeling contracts and confirm capacity to scale production or service delivery as needed. The contract is accessible via the DIBBS portal, and all work must align with the Department of Defense’s overarching standards for secure, traceable, and hazard-aware material handling.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Medical-Grade Packaging and Labeling ServicesThe contract requires the packaging of thermometer kits into sealed units and shipping containers, with all labeling strictly compliant with Medical Marking Standard No. 1, including the implementation of barcodes and Unique Identifier requirements to ensure traceability and regulatory adherence. Work must be performed at the specified place of performance in Jacksonville, Florida, with ZIP code 32226-3404, and all activities must meet the standards expected for medical-grade handling and documentation. The solicitation is classified as a subcontract under NAICS code 323113, indicating it relates to medical equipment and supplies manufacturing, and is issued by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF. Responses are due by August 4, 2026, and the opportunity was posted on July 29, 2026, with no set-aside type designated, meaning it is open to all eligible contractors without restriction based on size or status.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires specialized packaging and labeling services for incandescent lamps to meet military compliance standards, including fragile marking, MIL-STD-129 barcoding, and the use of D3/E5 containers with a clean and dry preservation method. All packaging must ensure the integrity and readiness of the lamps during storage and transit under Department of Defense specifications, with strict adherence to approved preservation techniques to prevent damage or degradation. The work is classified as a subcontract under NAICS code 323113 and is being managed by the ASC Commodities Division of the Department of Defense, with performance required at a location in Phoenix, Arizona, with a zip code of 85043. Responses must be submitted by the deadline of August 6, 2026, and the solicitation is accessible via the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Solicitation # SPE7M1-26-T-238Y

The contract is for the procurement of one voltmeter with NSN 6625-01-431-5169 and part number 4931-015, issued under solicitation SPE7M1-26-T-238Y by the Department of Defense through the Maritime Supply Chain. Delivery is required within 20 days to FPO AE 09587 aboard the USS SAN ANTONIO LPD 17, with FOB destination terms and no tolerance for quantity variance. The item may contain batteries and must comply with strict mercury restrictions—no intentional addition of mercury or its compounds except in functional applications such as batteries, fluorescent lights, or specified instruments, and any portable devices containing mercury must be shockproof with secondary containment as per NAVSEA 5100-003D. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-75 for electron tubes, with marking compliant to MIL-STD-129 including the special fragile marking code 36 indicating upward orientation and glass handling. The instrument must be shipped via parcel post with transportation governed by DLAD procedural notes C19 and C20, and the vendor must use VSM for RDD 777 shipments. The required delivery date is July 28, 2026, with a response deadline for proposals set for August 10, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE7M1-26-T-240M

The contract is for the procurement of two power transformers identified by NSN 5950-01-108-4566 under purchase request 7017697050, with a delivery requirement of 180 days after contract award. The solicitation, issued under number SPE7M1-26-T-240M, was posted on July 30, 2026, and responses are due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless superseded by an amendment. The contractor must comply with DLA packaging standards and ensure that government identification is removed from non-accepted supplies. An alternate offeror must submit a complete data package covering both the approved and alternate parts. The place of performance is designated as New Cumberland, Pennsylvania, 17070-5002, and the contracting activity is under the Department of Defense’s Maritime Supply Chain. Primary point of contact is Ryan Snyder, reachable via email and phone provided, with the solicitation accessible through the DIBBS portal.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

CONTROLLER, HOIST

Solicitation # SPE7M1-26-T-239K

The contract pertains to the procurement of one controller for a hoist, identified by NSN 6110016994928 and part number EC-23000-14, supplied by BREEZE-EASTERN LLC. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is classified as a critical application item, and specific packaging must conform to MIL-STD-2073-1E, including preservative methods, wrapping materials, cushioning, and interior packaging codes, with marking fully aligned with MIL-STD-129 and no special marking required. The unit of issue is each, with zero variance allowed in quantity, and delivery is required FOB origin, with inspection and acceptance occurring at the destination. The delivery window is 161 days from the contract award, with a required ship date of January 19, 2027, and an original delivery target of May 30, 2027. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The solicitation number is SPE7M1-26-T-239K, issued on July 30, 2026, with responses due by August 10, 2026, under NAICS code 335312, managed by the Department of Defense’s Maritime Supply Chain.

Motor and Generator Manufacturing

POSTED

DEADLINE

SPACER, DIAPHRAGM

Solicitation # SPE7M1-26-Q-1316

The contract specifies procurement of the item SPACER, DIAPHRAGM with NSN 1660-00-633-2631 and part number 14865, supplied by CARLETON TECHNOLOGIES INC and MISSION SYSTEMS ORCHARD PARK INC, both with CAGE code 04577. Six units are required under solicitation SPE7M1-26-Q-1316, with a firm delivery deadline 252 days after award and no variance allowed in quantity. The item is classified as a critical application and must comply strictly with SAE ARP1176 for cleaning and packaging, superseding any prior references to OC-ALC Drawing 8148650; deviation requires prior written approval from DSCR or OC-ALC. Packaging must adhere to ASTM D3951, but all requirements in the DLA Master List of Technical and Quality Requirements take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must conform to RP001: DLA Packaging Requirements for Procurement. Inspection and acceptance occur at destination, and government identification must be removed from non-accepted items. The unit of issue is each, with delivery directed to DLA Distribution Cherry Point, NC, and transportation governed by DLAD Proc Notes C19 and C20. The contract references technical and quality requirements identified by R or I numbers from the DLA Master List, with the governing revision depending on the acquisition size and amendment history. The solicitation was posted July 30, 2026, with responses due August 6, 2026, and the point of contact is Lexus Spears.

POSTED

DEADLINE

FILTER, SPECIAL

Solicitation # SPE7M1-26-T-243H

This contract pertains to the supply of a specialized filter identified by NSN 4330-21-920-3017 and part number 861640, with an order quantity of five units delivered FOB origin. The delivery must be completed within 246 days from the contract award and is to be received at the designated DLA distribution center in Tracy, California. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, packaging materials, and unit container requirements, with palletization governed by DLA procurement packaging guidelines. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for approved functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier in line with NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements, incorporating specified technical and quality clauses, and requires compliance with all applicable DLA procedural notes for transportation and delivery. The contract number is SPE7M1-26-T-243H, issued under a federal solicitation with a response deadline of August 10, 2026, and a posted date of July 30, 2026, managed by the Department of Defense’s Maritime Supply Chain.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

ADAPTER, STRAIGHT, TU

Solicitation # SPE7M1-26-T-239Z

The contract is for the procurement of 53 straight tube-to-hose adapters made of corrosion-resistant steel, identified by NSN 4730-01-141-4044 and part number AE21502K from EATON AEROQUIP LLC. The item is delivered in a single line item at a total price of $53.00, with a unit price of $1.00, and is subject to zero variance in quantity. Delivery is required within 32 days after order placement under FOB Origin terms, with the destination being the DLA Distribution facility in New Cumberland, Pennsylvania. All supplies must be packaged in strict accordance with MIL-STD-2073-1E, including preservation method 31 and required cleaning and drying procedures. Packaging bags must meet MIL-B-117 specifications, and palletization must comply with DLA’s RP001 packaging requirements. Marking and labeling must adhere to MIL-STD-129, including barcoding, with no special marking codes applied. The item is designed for use on E/I helicopter systems with a 1.0625-12 UNJ-3B thread size and classified under Class 3 threads. Inspection and acceptance occur at the destination point, with the government responsible for final evaluation. Technical and quality requirements referenced through R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, accessible online. The contract incorporates numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses related to employment equity, human trafficking prevention, electronic payment via WAWF, hazardous materials handling, cybersecurity safeguards including NIST SP 800-171, prohibited materials like hexavalent chromium, and restrictions on acquisition from Chinese military companies. All submissions must be made electronically through the DIBBS portal by the August 10, 2026 deadline, and the solicitation is open to small business participation under various socioeconomic categories. Payment will be processed exclusively through WAWF, and the contracting officer’s representative and payment details are to be provided in the final award documentation.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

BRAKE, ELECTRIC

Solicitation # SPE7M1-26-T-243J

The contract is for the procurement of three electric brakes with NSN 6110-01-699-8932 under solicitation SPE7M1-26-T-243J, issued by the Department of Defense through the Maritime Supply Chain office. Delivery is required within 83 days from award, and responses are due by August 10, 2026. The procurement falls under NAICS code 335312 and is open to full and open competition. Technical and quality requirements are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the United States, and mandates compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program certification, completed DLA training on export-controlled data, and formal approval from DLA may access the technical data. Packaging must adhere to DLA requirements, and any non-accepted supplies must have government identification removed. The contractor must be CMMC Level 2 certified as a C3PAO, and covered defense information protocols apply. All performance is to occur in New Cumberland, Pennsylvania, with Michael Reese as the primary point of contact.

Motor and Generator Manufacturing

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7M1-26-T-239M

This contract pertains to the procurement of eight piston rings designated as a restricted-source item requiring government engineering source approval, specifically for use in an intercontinental ballistic missile system. The contractor must be certified as a CMMC Level 2 C3PAO and comply with all applicable military packaging and marking standards, including MIL-STD-129, with each unit pack labeled with lot and serial numbers, contractor and manufacturer Cage codes, and part numbers. No item unique identification is mandated per customer request, though DFARS 252.211-7003(c)(1)(i) governs this provision. All waiver or deviation requests—regardless of classification—must be submitted to the DSC contracting officer for review and approval. Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce; DFARS 252.225-7048 applies, and only DLA contractors with approved JCP certification, completed export control training, and DLA authorization may access such data. The solicitation, issued under SPE7M1-26-T-239M, is a total small business set-aside with a NAICS code of 333912, with responses due by August 10, 2026, and delivery required 488 days after award to Hill AFB, Utah. Contracting officer contact is Kelsey Schlagenhaf at the Defense Logistics Agency.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

ASSEMBLY, REMOTE CON

Solicitation # SPE7M1-26-T-243A

The contract solicitation SPE7M1-26-T-243A seeks the procurement of two units of an Assembly, Remote Control with NSN 6110-01-656-1924, to be delivered to Tracy, CA, 95304-5000 within 196 days after delivery order issuance. The solicitation is governed by strict compliance with MIL-STD-2073-1E for packaging and preservation, requiring items to be clean, dry, and preserved using method 31 with no preservation or wrap materials, and packed under packaging code U with unit and intermediate containers designated as D3. Marking must conform to MIL-STD-129, with no special marking required, but hazardous materials must be labeled per 29 CFR 1910.1200 and radioactive materials meeting thresholds must be clearly marked. Technical and quality requirements referenced via RA001 are drawn from the DLA Master List of Technical and Quality Requirements, and compliance is mandatory. FAR clauses such as 52.222-50, 52.222-54, 52.223-23, and 52.223-3 are incorporated with deviation 2026-O0038, and the contract includes specific clauses on sustainable products, employment eligibility, and safeguarding contractor information systems. The inspection and acceptance occur at destination, with the government responsible for acceptance under FAR 52.246-2. The sole invoicing method is Wide Area WorkFlow (WAWF), and delivery must be FOB Origin for non-contiguous shipments. All offers must be submitted electronically via DIBBS by August 10, 2026, and include representations regarding unique entity ID, small business status, and socioeconomic certifications, though no offeror responses are present. Special contract requirements mandate submission of Safety Data Sheets and hazard warning labels prior to award, with strict adherence to DFARS 252.223-7001 and FAR 52.223-7 for hazardous and radioactive materials. The estimated contract value is $1,348,820 based on a historical unit price of $674.41 for 2,000 units referenced in the CLIN, though the solicitation CLIN lists a quantity of 2

Motor and Generator Manufacturing

POSTED

DEADLINE

LIGHT EMITTING DIODE

Solicitation # SPE7M1-26-Q-1314

The contract specifies the procurement of a single unit of a light emitting diode with National Stock Number 5980-01-608-7031 under solicitation SPE7M1-26-Q-1314, issued by the Department of Defense through the Maritime Supply Chain. The item is priced at a firm fixed price with no variance allowed in quantity, and delivery is required 204 days after the order date. Inspection and acceptance occur at the destination, with FOB terms set at origin. Packaging must comply with ASTM D3951 unless superseded by stricter technical or quality requirements from the DLA Master List, and all packaging and labeling must adhere to MIL-STD-129. Palletization follows DLA Packaging Requirements for Procurement, with the unit of issue and quantity per unit pack strictly as defined. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery address in Talladega, Alabama. The item is designated for a Foreign Military Sales program under W8RN AL ARNG FMS 14 with a government tracking identifier and requires shipment by the specified RDD and PROJ codes. The delivery is scheduled for June 26, 2026, and the solicitation response deadline is August 13, 2026, with Edward Aragon listed as the primary point of contact.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE7M1-26-T-240X

The contract is for the procurement of four power transformers with NSN 5950-01-226-2499 under solicitation SPE7M1-26-T-240X, with a required delivery within 105 days from award. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which must be consulted for all referenced R or I numbers; the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, except in specific exempted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specifically authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment barrier, in accordance with NAVSEA 5100-003D. All supplies must be free of government identification if not accepted, and the alternate offeror is required to submit a complete data package including technical details for both the primary and alternate parts. The contract is issued by the Department of Defense through the Maritime Supply Chain, with performance required at New Cumberland, Pennsylvania, and inquiries directed to Ryan Snyder at the provided contact information; submissions must be made by August 10, 2026.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

TRANSFORMER, POWER AUTO

Solicitation # SPE7M1-26-T-240K

The contract specifies the procurement of six power autotransformers with NSN 5950-00-810-8717 and parts numbers 3-60916-3 and 5-1172, issued under solicitation SPE7M1-26-T-240K as a total small business set-aside under NAICS code 334416. The requirement mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and mandates packaging in compliance with MIL-STD-129 and RP001, with hazardous materials following FED-STD-313 and TQ requirement IP025. All items must be delivered FOB origin to the designated receiving warehouse in Tracy, California, with zero variance allowed in quantity and an absolute delivery deadline of June 8, 2027, exactly 301 days after contract award. Inspection and acceptance occur at destination, and sampling must follow MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical, major, and minor attributes require verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0, with zero non-conformances required unless otherwise stated. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and configuration control mandates formal engineering change proposals or variance requests for any modifications. The contract also enforces strict labeling and packaging standards per DLA guidelines and references official DLA procedures for transportation logistics.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE