Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military Packaging, Marking, and Labeling Services

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military packaging, marking, and labeling services fully compliant with MIL-STD-129 standards, including the application of serialized container identifiers, barcoding systems, and proper hazardous material identification to ensure traceability and safety throughout the defense logistics chain. All work must meet strict federal requirements for durability, legibility, and information accuracy, with special attention to the handling and labeling of dangerous goods. Performances are to be executed at the specified location in San Diego, California, with a response deadline of August 7, 2026, and the procurement is structured as a subcontract under NAICS code 323113. The awarding agency is the Department of Defense, specifically DLA Fleet Readiness Southwest, and participation is open without set-aside classification. All vendors must be prepared to deliver fully compliant packaging solutions that integrate seamlessly into military supply operations.

General Info

MIL-STD-129 compliant military packaging and labeling in San Diego by August 7, 2026, for DoD under NAICS 323113.

Agency

Department Of Defense → DLA FLEET READINESS CT SOUTHWEST DLAView Agency

NAICS

323113 - Commercial Screen PrintingView NAICS

Place of Performance

SAN DIEGO, CA, 92135-7058, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CT SOUTHWEST DLA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA FLEET READINESS CT SOUTHWEST DLA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-129 compliant packaging, marking, and labeling including serialized container IDs, barcoding, and hazardous material identification.

Similar Contracts

Same NAICS industry code

Label Manufacturing and Hazardous Material ComplianceThe contract entails the manufacture and supply of 18,000 hazardous material labels that must fully comply with OSHA and MIL-STD-129 standards, ensuring proper identification, hazard communication, and military labeling requirements are met. Alongside the physical labels, the contractor is responsible for preparing Safety Data Sheets and securing formal approval of all label designs prior to any delivery, guaranteeing regulatory adherence and accuracy in hazardous material documentation. The work is to be performed under a subcontract arrangement issued by the Defense Logistics Agency on behalf of the Department of Defense, with performance focused on a military mail address classified under FPO 96643. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, under the NAICS code 323113 which pertains to commercial printing services. All deliverables must be completed in full compliance with federal specifications and verified through prior approval processes before shipment.

Defense Logistics Agency

POSTED

DEADLINE

MIL-STD-129 Marking, Labeling & BarcodingThe contract requires strict adherence to MIL-STD-129 standards for the marking and labeling of military items, ensuring full traceability through the use of Code 39 or PDF417 barcodes. These markings must be applied accurately to meet Department of Defense WAWF receiving procedures, guaranteeing seamless inventory management and logistical compliance across the supply chain. All labeling efforts must align with DoD requirements for item identification, packaging, and documentation to facilitate efficient receipt, storage, and distribution. This subcontract, issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, is designated under NAICS code 323113 and pertains to work performed at the New Cumberland location with zip code 17070-5002. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. The contract does not specify a set-aside type or point of contact, and full compliance with the specified marking standards is mandatory to fulfill contract obligations and avoid rejection during DoD receiving operations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Medical Item Marking & Packaging ServicesThe contract requires the application of MMS No. 1-compliant labels and the execution of commercial packaging for medical items, with strict adherence to Defense Logistics Agency shipping and marking standards. All work must ensure that medical supplies are properly identified, labeled, and packaged to meet federal military logistics requirements, particularly for distribution through the Department of Defense supply chain. The performance location is designated as APO, ZIP 09604-6180, indicating operations are centered around military postal facilities, likely supporting overseas deployments or military personnel. This subcontract, posted on July 29, 2026, with a response deadline of August 4, 2026, falls under NAICS code 323113 for printing and related support activities, reflecting the specialized nature of labeling and packaging services. The contracting entity is the Medical Supply Chain MD SURG FSF under the Department of Defense, underscoring the critical role this work plays in sustaining medical readiness. Compliance with DLA standards is non-negotiable, and all bidders must demonstrate capability to handle sensitive medical materials with precision, accuracy, and timeliness to ensure seamless integration into military logistics systems.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military-Grade Packaging ServicesThe contract requires specialized preservation, drying, and packaging services for precision components in strict compliance with MIL-STD-2073-1E standards to maintain operational integrity throughout military logistics and extended storage periods. All work must meet stringent defense-grade requirements for environmental protection, corrosion prevention, and long-term readiness, ensuring components remain functional and uncontaminated under demanding conditions. The effort involves full adherence to military packaging protocols including material selection, labeling, sealing, and documentation procedures to support traceability and quality assurance across the supply chain. This is a subcontract opportunity under the Department of Defense’s ASC Commodities Division, with a NAICS code of 323113, indicating a focus on printing and related support activities adapted for defense packaging applications. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026. Performance location details are unspecified, but work is expected to align with Defense Logistics Agency standards and military logistics networks. Interested parties must submit proposals through the DIBBS system prior to the deadline, ensuring full responsiveness to technical, procedural, and regulatory demands outlined in the military standard.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Medical Product Packaging and Labeling ServicesThe contract seeks commercial packaging and labeling services for medical inhalers, requiring adherence to MIL-STD-2073-1E and the Medical Marking Standard No. 1 to ensure standardized, secure, and compliant handling of sensitive medical devices. All packaging must include sealed unit containers designed to maintain sterility and integrity throughout the supply chain, with labeling that meets exacting military and healthcare regulatory specifications. The work is designated as a subcontract under NAICS code 323113, targeting vendors capable of delivering precision packaging solutions for federally managed medical products. The opportunity is managed by the Department of Defense through the MEDICAL SUPPLY CHAIN PHARM FSA, with performance required at Fort Campbell, Tennessee, in ZIP code 42223-5000. Bidders must submit responses by August 4, 2026, following the solicitation posted on July 29, 2026. While no set-aside classification is specified, the contract emphasizes technical compliance, quality assurance, and reliability in handling regulated medical devices intended for military use. Access to full details is available through the provided DIBBS link.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Military Labeling and Marking (MIL-STD-129)The contract requires the application of durable, scannable military labeling in strict compliance with MIL-STD-129 standards, covering unit identification, barcoding, and mandatory hazardous material warnings for applicable items. All labels must be engineered for durability under harsh military conditions and fully compatible with standard scanning systems used across defense logistics networks. The work is to be performed at the specified location in Albany, Georgia, with a response deadline of August 6, 2026, and is classified as a subcontract under NAICS code 323113. The contract is issued by the ASC Commodities Division within the Department of Defense, and all deliverables must meet exacting government specifications to ensure interoperability and readiness across the supply chain.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Corrosion-Resistant Packaging and PreservationThe contract seeks the supply and application of vapor corrosion inhibitor (VCI) bags, desiccants, and barrier films for the preservation of sensitive electronic components within defense kits, adhering strictly to military preservation standards. The work requires compliance with technical specifications for corrosion prevention, ensuring components remain protected during storage and transit under adverse environmental conditions. Materials must meet specified performance thresholds for moisture barrier integrity, VCI emission rates, and longevity of protective properties, all aligned with current defense packaging protocols. This is a total small business set-aside under NAICS code 323113, meaning only small businesses are eligible to submit proposals. The opportunity is issued as a subcontract by the Maritime Supply Chain organization under the Department of Defense, with performance required at Tracy, California, ZIP 95304-5000. Proposals are due by August 13, 2026, and the solicitation was posted on July 29, 2026. All submissions must demonstrate the capability to deliver certified packaging solutions in full compliance with military requirements and timelines.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military-Grade Packaging and Labeling ServicesThe contract requires specialized packaging and labeling of electronic components in strict compliance with military standards including MIL-STD-129, MIL-STD-2073-1E, and IPC/JEDEC J-STD-609 to ensure full traceability, proper hazard communication, and regulatory compliance. All work must meet exacting specifications for labeling, barcoding, container marking, and documentation to support the Department of Defense’s logistical and safety requirements. The services are intended for components designated for military use and must be performed under a subcontract arrangement with rigorous attention to detail and quality control. The solicitation is issued under NAICS code 323113 and is set for performance in Fort Campbell, Kentucky, with a zip code of 42223-5000. The opportunity was posted on July 29, 2026, and responses are due by August 10, 2026. The contracting office is the Active Devices Division under the Department of Defense, and while no set-aside type is specified, the work is exclusively for military-grade applications requiring certified packaging procedures. Full compliance with all referenced standards is mandatory for bid eligibility and contract performance.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires performance of preservation and packaging services strictly in accordance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all military equipment and supplies are protected for long-term storage and transport under harsh conditions. This includes the fabrication and sealing of unit containers and export-ready packaging designed to meet the rigorous durability, moisture resistance, and contamination control requirements of military logistics systems. All work must be executed to support the Department of Defense’s supply chain integrity, with final products prepared for deployment from the designated place of performance at Fort Bragg, North Carolina, 28310. This is a subcontract opportunity under NAICS code 323113, which pertains to printing and related support activities, though the core function here is specialized defense packaging. The solicitation was posted on July 29, 2026, with a firm response deadline of August 4, 2026, indicating a narrow window for qualified vendors to submit proposals. The contracting activity is managed by the Medical Supply Chain Pharm FSA within the Department of Defense, emphasizing the critical nature of packaging medical and pharmaceutical assets destined for military use. Compliance with federal military standards is non-negotiable, and contractors must demonstrate proven capability in handling sensitive, mission-critical items through certified packaging protocols.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Labeling and Marking Services (MIL-STD-129 Compliance)The contract requires full compliance with MIL-STD-129 for military labeling and marking, encompassing NSN tagging, hazard warnings, and shipment identifiers to ensure standardized identification and handling of defense-related cargo. All labeling must adhere to the strict visual and content specifications mandated by the standard, including durable materials, precise placement, and accurate barcoding to support logistics tracking across military supply chains. The work is classified as a subcontract under NAICS code 323113 and is issued by the Department of Defense’s Land Supply Chain unit, with performance expected to support defense logistics operations regardless of specific geographic location. Responses are due by August 10, 2026, and submissions must demonstrate proven expertise in military-grade labeling systems and the ability to meet stringent quality and compliance requirements. While no set-aside provisions are specified, bidders must be prepared to provide documentation of past performance with similar defense labeling contracts and confirm capacity to scale production or service delivery as needed. The contract is accessible via the DIBBS portal, and all work must align with the Department of Defense’s overarching standards for secure, traceable, and hazard-aware material handling.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Medical-Grade Packaging and Labeling ServicesThe contract requires the packaging of thermometer kits into sealed units and shipping containers, with all labeling strictly compliant with Medical Marking Standard No. 1, including the implementation of barcodes and Unique Identifier requirements to ensure traceability and regulatory adherence. Work must be performed at the specified place of performance in Jacksonville, Florida, with ZIP code 32226-3404, and all activities must meet the standards expected for medical-grade handling and documentation. The solicitation is classified as a subcontract under NAICS code 323113, indicating it relates to medical equipment and supplies manufacturing, and is issued by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF. Responses are due by August 4, 2026, and the opportunity was posted on July 29, 2026, with no set-aside type designated, meaning it is open to all eligible contractors without restriction based on size or status.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires specialized packaging and labeling services for incandescent lamps to meet military compliance standards, including fragile marking, MIL-STD-129 barcoding, and the use of D3/E5 containers with a clean and dry preservation method. All packaging must ensure the integrity and readiness of the lamps during storage and transit under Department of Defense specifications, with strict adherence to approved preservation techniques to prevent damage or degradation. The work is classified as a subcontract under NAICS code 323113 and is being managed by the ASC Commodities Division of the Department of Defense, with performance required at a location in Phoenix, Arizona, with a zip code of 85043. Responses must be submitted by the deadline of August 6, 2026, and the solicitation is accessible via the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA FLEET READINESS CT SOUTHWEST DLA

Same awarding agency

Cybersecurity and Covered Defense Information SafeguardingThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information, ensuring full compliance with DFARS 252.204-7012. This subcontract is focused on securing sensitive data handled by the contractor within the Department of Defense ecosystem, with specific emphasis on safeguarding information that is not classified but still requires protection under federal cybersecurity guidelines. The scope demands a rigorous, documented approach to control implementation including access controls, audit logging, media protection, and incident response capabilities, all tailored to meet the stringent requirements for handling defense-related data. Performance is to be carried out at the location in San Diego, California, ZIP 92135-7058, and the work falls under NAICS code 541512 for computer systems design services. The solicitation was posted on July 30, 2026, with a firm response deadline of August 7, 2026, indicating a short turnaround for interested parties to submit proposals. The contracting activity is managed by DLA Fleet Readiness Center Southwest under the Department of Defense, underscoring the mission-critical nature of the cybersecurity requirements. Compliance is non-negotiable, and failure to maintain the required controls may result in contract termination or penalties due to the sensitive nature of the covered defense information involved.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and Safety DocumentationThe contract requires identification of hazardous materials and the preparation of compliant Safety Data Sheets and hazard warning labels in accordance with federal and Department of Defense regulations. The work is classified as a subcontract under NAICS code 541690 and is solicited by the Department of Defense through DLA Fleet Readiness Southwest. Performance must occur at the designated location in San Diego, California, with a zip code of 92135-7058. Proposals are due by August 7, 2026, and the solicitation was posted on July 30, 2026. All documentation must meet exacting regulatory standards to ensure proper handling, storage, transportation, and disposal of hazardous substances within defense operations.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Precision Manufacturing of Angle Component (NSN 1560LN0031483)A subcontract is being issued for the manufacture, inspection, and delivery of one precision angle component identified by NSN 1560LN0031483, fully compliant with military specifications and accompanied by complete traceability and quality documentation. The work must be performed to exacting standards ensuring operational reliability and compliance with defense requirements, with all processes documented to support accountability and audit readiness. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and the contract falls under NAICS code 332312 for Machined Metal Product Manufacturing. Performance is required at a location in San Diego, California, with the DLA Fleet Readiness Center Southwest, under the Department of Defense, as the procuring entity. This procurement is structured as a subcontract without a defined set-aside classification, and interested parties must submit their proposals through the designated DIBBS platform by the deadline to be considered.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # SPEFA5-26-T-0969

This contract is for the procurement of four units of a critical application item identified as P/N 65207-10037-102 with NSN 1560-LL-NC1-4288, designated as SKIN, under solicitation SPEFA5-26-T-0969 issued by the DLA Fleet Readiness Center Southwest. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951 for packaging. Sampling is governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at levels VII, IV, and II for critical, major, and minor characteristics respectively. The item has no shelf life restriction and must be physically marked per RQ017, with all packaging and labeling strictly adhering to MIL-STD-129 and palletization per DLA Packaging Requirements. Delivery is FOB destination in 83 days, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The unit of issue is each, with a total price of $4.00 per unit. The required delivery date is December 8, 2026, and items must be shipped to the freight address at Naval Base Coronado, with parcel post delivery to a separate PO Box in San Diego, California. The contract is for federal procurement under NAICS code 488190 and is managed by Larry Kemp of the Department of Defense.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Solicitation # SPEFA3-26-T-0332

This contract under solicitation SPEFA3-26-T-0332 issued by DLA Fleet Readiness Center Southwest requires the delivery of one unit of part number 1560-LN-003-1483, identified as a critical application item for The Boeing Company with P/N 74A350841-2044. The item has no shelf life requirement and must be delivered FOB destination within 84 days of contract award, with zero tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified; attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. Packaging must comply with ASTM D3951 but is subordinate to DLA requirements, and all items must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is each (EA). Inspection and acceptance occur at destination. The sole delivered quantity is one unit at a total price of one dollar. The delivery address for freight is Naval Base Coronado, Building 660, Bay 3, and the parcel post address is PO Box 357058, Naval Air Station North Island. The original required delivery date is October 30, 2026.

Other Support Activities for Air Transportation

POSTED

DEADLINE

RAMP SKIN PANEL

Solicitation # SPEFA5-26-T-0971

The RAMP SKIN PANEL contract under solicitation SPEFA5-26-T-0971 specifies the procurement of five units of part number 1560-LL-NCB-1542, with a unit price of $5.00 per unit and a total contract value of $25.00. Delivery is required within 90 days of contract award, with FOB destination terms mandating delivery to the designated receiving point at Naval Base Coronado in San Diego, California. Inspection and acceptance both occur at the destination, and no quantity variance is permitted. The item is classified as a critical application item with no shelf life requirement and must comply with all DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization aligned to DLA packaging standards. The part is designated as a tailored higher-level quality requirement item and must be physically identified per RQ017. The unit of issue is each (EA), and packaging must reflect the specified QUP. The original required delivery date is December 15, 2026, and shipping instructions include both parcel post and freight addresses for DLA receiving operations.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Solicitation # SPEFA1-26-Q-0098

The contract pertains to the procurement of five units of a weld assembly identified by part number 1660-LN-003-5530 under solicitation SPEFA1-26-Q-0098, issued by the Defense Logistics Agency Fleet Readiness Southwest. The item is priced at a firm fixed price with no variance allowed in quantity, meaning exactly five units must be delivered with no tolerance for over or under shipment. Delivery is required within one day after award date, with both inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 unless overridden by DLA’s Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129 with palletization following RP001 DLA packaging standards. The unit of issue is each, and the quantity per unit pack is defined in the contract. The delivery destination for freight is Building 660, Bay 3, Rogers Road, Naval Base Coronado, San Diego, CA, while the parcel post address is PO Box 357058, Naval Air Station North Island, San Diego, CA. The required delivery date is October 30, 2026, and the purchase request number is 7017692202. All technical and quality specifications referenced including RA001, RP001, ZQA03, ZD080, RQ017, RQ039, RQ009, RS002, and RQ025 are incorporated by reference. The point of contact for this solicitation is Cynthia Liles, reachable via phone and email provided.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 3 hours

Solicitation # SPEFA1-26-Q-0097

The contract specifies the procurement of two washers with part number 5310-LLQJ08576 under solicitation SPEFA1-26-Q-0097 issued by the Defense Logistics Agency Fleet Readiness Southwest. The item is priced at a firm fixed price with no variance allowed in quantity, meaning exactly two units must be delivered as ordered. Delivery is required within three days after award of contract, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 unless overridden by DLA’s Master List of Technical and Quality Requirements, and all units must be marked and labeled per MIL-STD-129. Palletization is required to conform to RP001 DLA Packaging Requirements for Procurement. The unit of issue is each, and each washer must be packaged as specified under QUP:001. Delivery is to be made to the freight shipping address at Naval Base Coronado in San Diego, California, while the parcel post address serves as an alternate receiving point. The government’s material need date is set for September 23, 2026, and the contract was posted on July 28, 2026, with a response deadline of July 31, 2026. The point of contact for inquiries is Cynthia Liles, reachable via phone and email provided.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 3 hours

Transportation and Delivery LogisticsThe contract involves the domestic transportation and delivery of packaged aluminum sheets from the manufacturer to a U.S. military facility in San Diego, California, under a subcontract arrangement. The movement of goods must fully comply with the Defense Priorities and Allocations System (DPAS) to ensure priority handling in support of national defense requirements. All shipments must be reported through the Wide Area Workflow (WAWF) system to maintain accurate, real-time tracking and documentation as mandated by the Department of Defense. The NAICS code 484220 indicates this is a freight transportation services contract specifically for trucking operations. The request for quotation was posted on July 27, 2026, with responses due by August 3, 2026, and is managed by the DLA Fleet Readiness Southwest under the Department of Defense. The place of performance is fixed at the San Diego military facility, and adherence to government logistics protocols for delivery and reporting is required throughout the contract lifecycle.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract requires the provision of protective packaging, MIL-STD-129 labeling, and RP001-compliant palletizing services for aluminum sheets destined for DLA shipment. All packaging must include PVC coating to ensure protection against corrosion and environmental damage during transit. The labeling must strictly adhere to MIL-STD-129 standards to guarantee accurate identification and tracking throughout the defense logistics chain. Palletizing must follow RP001 requirements to ensure stability, safety, and compliance with military handling protocols. The contractor must also be fully prepared for WAWF reporting to enable seamless electronic documentation and invoice processing within the Department of Defense’s automated systems. This subcontract is issued under NAICS code 493190 and is part of the DLA Fleet Readiness Southwest’s operational logistics efforts, with responses due by August 3, 2026.

Other Warehousing and Storage

POSTED

DEADLINE

Supply of MIL-SPEC Aluminum Sheet (2024-T3-BARE)The contract requires the manufacture and delivery of 312 linear feet of aluminum sheeting conforming to AMS-QQ-A-250/4 specification, grade 2024-T3-BARE, with a thickness of 0.032 inches, width of 48 inches, and length of 12 feet per piece. All material must originate from a single heat lot to ensure uniform chemical and mechanical properties, with full traceability documentation provided for every batch. Comprehensive certification, including material test reports and heat lot identification, must accompany the shipment to confirm compliance with military specifications. The materials are intended for use in defense applications requiring high strength and durability, and strict adherence to the specified alloy and temper is mandatory. The solicitation, titled Supply of MIL-SPEC Aluminum Sheet (2024-T3-BARE), is issued as a subcontract under the Department of Defense through DLA Fleet Readiness Southwest, with the NAICS code 331315 indicating fabrication of rolled metal shapes. The response deadline is August 3, 2026, and all submissions must be completed by that date. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS portal. No set-aside provisions apply, and the contract is open to qualified suppliers capable of meeting exacting aerospace-grade material standards with full documentation and lot traceability.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

DEADLINE

ALUM SH 2024-T3-BARE-.

Solicitation # SPEFA1-26-Q-0095

The contract specifies the procurement of 312 linear feet of aluminum sheeting compliant with AMS-QQ-A-250/4 (2024-T3-BARE), measuring 0.032 inches in thickness, 48 inches in width, and 12 feet in length, with PVC coating on both sides. All material must originate from the same heat lot and include required certifications upon delivery. The item is to be packaged per ASTM D3951, marked and labeled according to MIL-STD-129, and palletized in accordance with RP001 DLA packaging requirements. The unit of issue is linear feet, with no variance allowed in quantity—exactly 312 feet must be delivered. The pricing is firm fixed, with inspection and acceptance occurring at the destination. Delivery is required within seven calendar days after award, and the shipment must be sent to the designated DLA receiving facility at Naval Base Coronado in San Diego, California. The government-provided delivery target date is September 23, 2026, under solicitation SPEFA1-26-Q-0095, with the purchaser identified as DLA Fleet Readiness Southwest. All technical and quality standards mandated by the DLA Master List supersede any conflicting ASTM requirements.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

DEADLINE