Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Corrosion Resistant Solution Heat Treated Metal Sheeting

Active

Federal

Response Deadline09/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of specialized corrosion resistant solution heat treated metal sheeting for prime contractors supporting DLA supply contracts. The material must be provided with a 1/2 hard condition and sheared edges, adhering to specific dimensions of 0.020 inches thick, 36 inches wide, and 120 inches long. All deliverables must comply with MIL-STD-129 standards for marking and shipment. The finished metal sheeting is to be delivered to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB in zip code 73145-8000.

General Info

Supply of specialized corrosion resistant metal sheeting to DLA Distribution Depot Oklahoma.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-26-T-2246.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHEET, METAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 25

Submission deadline

Response Deadline

09/25/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DEPOT OKLAHOMA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized metal sheeting for prime contractors delivering DLA supply contracts. Provides sheeting with 1/2 Hard Condition and Sheared Edge, ensuring Corrosion Resistant Solution Heat Treatment to dimensions of 0.020" thick by 36" wide by 120" long. Complies with MIL-STD-129 for marking and shipment. Delivers finished metal sheeting to DLA Distribution Depot Oklahoma.

Similar Contracts

Same NAICS industry code

C-FRAME HYDRAULIC PRESS

Solicitation # SPE4A826Q0043_0002

POSTED

about 4 hours ago

DEADLINE

seeking Small Businesses to supply products and services in support of our USAF Noise Suppressor Sustainment Contract

Solicitation # seeking-small-businesses-supply-products-services-support-our-usaf-noise-suppressor-sustainment

Vital Link Inc. is seeking small businesses across all socioeconomic categories to provide products and services as subcontractors in support of the USAF Noise Suppressor Sustainment Contract. As part of its subcontracting plan, Vital Link Inc. aims to achieve a goal of 32 percent small business spend. The solicitation is open for responses until December 31, 2026, and targets specific NAICS codes including 335999, 238320, 325520, 332722, 332999, and 332322. The scope of work involves a wide range of deliverables, including raw materials such as stainless and carbon steel, hardware like nuts and bolts, electrical components, and machined or fabricated parts. Additionally, the requirement covers specialized services and supplies such as insulation, sealants, painting, structural steel support, and freight and packaging logistics. Primary points of contact for this effort include Ashley Barry, Ashley Aguilar, and Vice President A.C. Kujawa.

Vital Link Inc.

POSTED

about 12 hours ago

DEADLINE

Supply of Air Conditioning-Heating Duct Assemblies (NSN 1660-01-015-7847)This subcontract involves the manufacture and supply of five air conditioning-heating duct assemblies, specifically NSN 1660-01-015-7847, for prime contractors supporting Department of Defense DLA supply contracts. The production process requires sheet metal fabrication to ensure all units meet the technical specifications outlined in the DLA Master List of Technical and Quality Requirements RA001. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332322 and is managed by the ASC Supplier Oper AE and AF Div. Performance for this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for September 22, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Hinge Assembly Component SupplyThis subcontract involves the supply of 2,000 hinge assemblies for prime contractors supporting the Department of Defense DLA Subsistence FSE Supply Chain. The provider is responsible for manufacturing or sourcing hardware that adheres to the technical specifications of NSN 7310-01-590-5768 and the DLA Master List of Technical and Quality Requirements RA001. All deliveries are set as FOB Destination, with performance taking place in San Diego, California. The contract requires strict adherence to RD003 Covered Defense Information standards for the handling of sensitive data. Classified under NAICS code 332322, the opportunity was posted on September 14, 2026, with a response deadline of September 18, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Windshield Wipe Arm ManufacturerThis subcontract opportunity with the Department of Defense Land Supply Chain involves the manufacture of windshield wipe arms for prime contractors. The selected provider must fabricate the arms according to Army drawings and apply specific high-temperature and Chemical Agent Resistant Coatings as defined by DCSC Drawing 16236 CS-2300-0001. Quality control must be maintained in accordance with MIL-STD-1916 or ASQ H1331, and all finished products must be delivered with a Certificate of Conformance. To be eligible, manufacturers must possess CARC application facilities and maintain CMMC Level 2 compliance. The contract falls under NAICS code 332322. Interested parties must submit their responses by September 25, 2026.

LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Utility Access Door Fabrication and Supply

LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Precision Shim SupplierThis subcontract with the Department of Defense DLA Fleet Readiness Center involves the supply of 50 precision shims, specifically Part Number S7004-010, to support prime contractors delivering DLA supply contracts. The manufacturer must adhere to Revision C specifications and ensure compliance with RA001 technical requirements. Performance is based in Cherry Point, and the work falls under NAICS code 332322. Quality control and logistics are governed by strict military standards, including sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-130N(1). Additionally, all deliverables must meet MIL-STD-129 packaging standards. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 23 hours ago

DEADLINE

Supply of Utility Access Door (NSN 5340-01-619-1308)This subcontract involves the supply of one Utility Access Door meeting NSN 5340-01-619-1308 specifications for prime contractors delivering DLA supply contracts. The provider is responsible for manufacturing or sourcing the door, utilizing additive manufacturing if necessary, and ensuring full compliance with DLA Master List technical requirement RA001 and packaging requirement RP001. The contract is issued by the Department of Defense Land Supply Chain under NAICS code 332322. The final deliverable is one completed utility access door to be shipped to the designated DLA location. The response deadline for this opportunity is September 25, 2026.

LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Gun Lockbox SupplierThis subcontract opportunity with the Department of Defense, specifically for the Navsup Flt Logistics Ctr Norfolk, requires the manufacture and delivery of 25,000 gun lockbox kits. The lockboxes must be constructed from black metal with a crinkle finish coating, sized for small pistols, and feature internal hinges and individual keyed locks. All units must adhere to the specified PWS acceptance and inspection criteria to ensure quality and compliance. The project is designated as a total Small Business Set Aside under NAICS code 332322, with the place of performance located in Millington, Tennessee. Interested parties must respond by September 17, 2026, to be considered for the supply of these materials to prime contractors.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Laundry Equipment & Cart SupplyThis subcontract with the Department of Veterans Affairs, managed by Network Contract Office 10, involves the supply and maintenance of specialized transport carts for prime contractors at VA Medical Center projects in Cincinnati. The provider is responsible for delivering a fleet of compliant linen delivery carts and protective covers, ensuring all equipment features shelves, dividers, and permanent tare weight labels on both ends. All provided carts must adhere to the specific facility loading dock standards outlined in Exhibit E. The contract falls under NAICS code 332322 and was posted on September 14, 2026, with a response deadline of September 15, 2026.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

in about 2 hours

55-Gallon Steel Drum SupplierThis subcontract agreement establishes a partnership for the supply and delivery of new 55-gallon steel drums to support prime contractors on Nashville Electric Service procurement projects. The contractor is required to provide open head, two bung lid drums that strictly adhere to UN 1 A2 certification standards. Deliveries will be made on an as-needed basis over a two-year performance period within Nashville, Tennessee. To qualify for this engagement, suppliers must possess standard business licenses and provide verified UN 1 A2 product certification. The solicitation was posted on September 14, 2026, with a response deadline of September 28, 2026. This procurement falls under NAICS code 332322 and is managed by the Nashville Electric Service in Tennessee.

Nashville Electric Service

POSTED

DEADLINE

23375-261160 Corrugated Steel Cover

Solicitation # WS5862713256

The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5862713256 for the procurement of corrugated steel covers. This federal opportunity is designated for performance within the National Capital Region. The solicitation was posted on September 14, 2026, and the deadline for responses is October 9, 2026. Interested parties should direct inquiries to the primary contracting authority, Nawal Shooman.

Department of Public Works and Government Services

POSTED

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

Precision Metal Plate Manufacturing and SupplyThis subcontract for the Department of Defense involves the manufacture and supply of precision metal plates for prime contractors under Defense Logistics Agency supply contracts. The work is performed at Tinker AFB and requires the fabrication of plates to exact dimensions without test coupons. All materials must adhere to strict marking and preservation standards, specifically MIL-STD-129, ASTM B666, MIL-STD-129R(3), and ASTM B660. The supplier must utilize precision machining equipment and provide Mill-Material Certification and Certificates of Quality Compliance with every shipment. This opportunity falls under NAICS code 332312 and was posted by Depot Oklahoma. Interested parties must respond by September 25, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

MASK, AIR FILTERING

Solicitation # SPE8E6-26-T-4598

All Other Rubber Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

DEMINERALIZER, WATER, IO

Solicitation # SPE8E8-26-Q-0497

DLA Troop Support is soliciting quotes for the procurement of 87 water demineralizers under solicitation number SPE8E826Q0497. This is a total small business set-aside opportunity under NAICS code 333310. The items must be delivered to the DLA Distribution Depot in Oklahoma within 124 days after the order is placed. Approved sources for this requirement include 4QM71 MROD-35-LA-1 and S4023 8013427. All responsible sources may submit electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online, and no hard copies or separate technical drawings are provided.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

BATTERY, NONRECHARGEABL

Solicitation # SPE7L7-26-T-5255

Battery Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2246

Solicitation SPE8E4-26-T-2246 is a request for quotes from DLA Troop Support for 21 sheets of corrosion-resistant, solution heat-treated steel, COMP 301, in 1/2 hard condition with sheared edges. The material must meet exact dimensions of 0.020 inches thick, 36 inches wide, and 120 inches long, with a reference weight of 25.2 lb/sh. Delivery is required FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB, with a need ship date of October 26, 2026. Technical compliance is critical, as the government will not accept test coupons or sheets that deviate from the exact dimensions. Suppliers must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award unless a deviation is explicitly noted. Marking must comply with MIL-STD-129 and include specific details such as the contract delivery order number, NSN, and heat and lot number. Packaging and preservation must adhere to ASTM A700 and RP001 standards to protect the material from physical damage. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Evaluation includes a price preference for certified HUBZone Small Business Concerns. Invoicing and payment must be processed through the Wide Area Workflow (WAWF) system, and inspection and acceptance will occur at the destination.

Rolled Steel Shape Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2245

Solicitation SPE8E4-26-T-2245 is a request for quotes from DLA Troop Support Construction and Equipment for the procurement of four aluminum alloy metal plates. The required material is Alloy 2024 Temper T351, with specific dimensions of 3.25 inches thick, 24.00 inches wide, and 72.00 inches long. This is designated as a critical application item, and the government will only accept sheets that conform to these exact dimensions; test coupons are strictly prohibited. The procurement is governed by several technical standards, including SAE AMS-QQ-A-250/4B, ASTM B660, and ASTM B666, and requires a Certificate of Quality Compliance (Mill-Material Certification) to be provided with every shipment. The contract mandates strict adherence to the Qualified Suppliers List for Distributors (QSLD), and only listed suppliers are eligible for award unless a deviation is explicitly indicated. Delivery is set for FOB Origin with a required delivery date of January 20, 2027, and a need ship date of March 1, 2027, shipping to the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must comply with MIL-STD-129 and ASTM B660, including continuous identification markings such as the contract delivery order number, NSN, and heat/lot number. Failure to comply with these marking and certification requirements will result in the rejection of the product. The solicitation is not a small business set-aside, but it provides a price evaluation preference for SBA-certified HUBZone small business concerns. Offers must be submitted via the DIBBS system, and any products created using additive manufacturing are ineligible for award. The contract also incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Inspection and acceptance will take place at the destination.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 23 hours ago

DEADLINE

Supplier of Valve Seats (NSN 4820011685146)This subcontract, issued by the Department of Defense via Depot Oklahoma, requires the manufacture or sourcing of 225 valve seats under NSN 4820011685146. These critical application items are intended for prime contractors supporting DLA Land and Maritime supply contracts. The performance of this contract takes place at Tinker AFB, and the opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418. The supplier is responsible for ensuring all units are marked and labeled according to MIL-STD-129 and palletized in accordance with RP001 DLA Packaging Requirements. Additionally, the contractor must provide Safety Data Sheets for any hazardous coatings used on the components. The final delivery consists of 225 valve seats packaged and labeled to the specified technical requirements.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Supply of Lithium Poly-Carbon Monofluoride Batteries (NSN 6135015020018)This subcontract with the Department of Defense, specifically the Depot Oklahoma agency, involves the supply of 95 nonrechargeable Lithium Poly-Carbon Monofluoride batteries. The contract specifies the use of Airtronics LLC part number 95210400-01 and requires that all units maintain a shelf life of 120 months. Performance will take place at Tinker AFB. Strict quality and packaging standards are mandated, including sampling per MIL-STD-1916 or ASQ H331 and packaging according to MIL-STD-2073-1E and MIL-STD-129. Additionally, the supplier must obtain engineering source approval from the Government Design Control Activity to ensure compliance with technical specifications.

Battery Manufacturing

POSTED

DEADLINE

Supply of Safety Relief Valves (NSN 4820-00-113-9110)This subcontract involves the procurement and manufacture of 191 safety relief valves, identified by NSN 4820001139110, to support prime contractors on projects for Depot Oklahoma under the Department of Defense. The work is performed at Tinker AFB and requires strict adherence to MIL-STD-129 for marking and RP001 DLA Packaging Requirements to ensure proper shipment and storage. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 332111. All units must be delivered by March 7, 2027. The solicitation was posted on September 13, 2026, with a response deadline of September 24, 2026.

Iron and Steel Forging

POSTED

DEADLINE

BATTERY, NONRECHARGEABL

Solicitation # SPE7L7-26-T-5242

Solicitation SPE7L7-26-T-5242 is a fixed-price request for quotations issued by the Defense Logistics Agency for the procurement of 95 nonrechargeable lithium poly-carbon monofluoride batteries. The required items are identified as critical application items, specifically Airtronics LLC part number 95210400-01 and NSN 6135015020018. These batteries are designated as Type I with a non-extendable shelf life of 120 months. The items are restricted source and require engineering source approval by the government design control activity. Delivery is required within 260 days after receipt of order, with a need ship date of June 12, 2027, and a final required delivery date of August 19, 2027. The shipping destination is the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2, utilizing sampling methods based on MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and specific DLA hazardous materials requirements under IP025 and the Hazard Communication Standard. The contract incorporates various federal and defense clauses, including DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program. Additionally, the hardware must comply with NAVSEA 5100-003D regarding mercury restrictions. Payment requests and receiving reports must be submitted electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-271Q

Solicitation SPE7MC-26-T-271Q is a request for quotations issued by DLA Land and Maritime for the procurement of 191 safety relief valves, identified by NSN 4820-00-113-9110 and Essex Industries part number 20C-0009-1. This is a restricted source item requiring engineering source approval by the government design control activity and is designated as a critical application item. The procurement is set aside for Women-Owned Small Business concerns, and eligible offerors must be certified by the Small Business Administration or an approved third-party certifier. The original required delivery date is March 7, 2027, with a delivery window of 84 days after the order. The contract specifies that inspection and acceptance will occur at the destination, with shipments delivered FOB origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. Technical and quality requirements from the DLA Master List take precedence over general packaging standards. Offerors must submit quotes via the DIBBS portal and comply with various federal regulations, including the Buy American Act and the Berry Amendment. Additionally, the contractor must use the Wide Area WorkFlow system for electronic invoicing and payment requests.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-271V

Solicitation SPE7MC-26-T-271V is a request for quotations issued by DLA Land and Maritime for the procurement of 225 valve seats, identified by NSN 4820011685146. This requirement is designated as a critical application item and is established as a total small business set-aside under NAICS code 332911. The procurement is managed through the DIBBS system, with a response deadline of September 24, 2026, and an original required delivery date of January 12, 2027. The contract specifies that delivery should be made FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination. Packaging must adhere to ASTM D3951 and RP001 standards, with marking and labeling compliant with MIL-STD-129. The procurement incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and NIST SP 800-171 cybersecurity requirements. Payment processing is required through the Wide Area WorkFlow system.

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS