Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Corrosion-Resistant Steel Sheet Fabrication & Supply

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture and delivery of seven sheets of cold-rolled steel with a composition of 630, solution heat treated, to meet stringent material specifications including SAE AMS5604K, ASTM A700-14, and MIL-STD-129R. These standards ensure the steel possesses the required mechanical properties, surface quality, and corrosion resistance for high-performance applications within defense and aerospace environments. The material must be produced and certified to comply with all technical requirements for chemical composition, heat treatment, dimensional tolerances, and packaging as outlined in the referenced specifications. The contract is classified as a subcontract under NAICS code 331221, indicating it pertains to rolling and finishing of steel. It was posted on July 22, 2026, with a response deadline of August 3, 2026, and the place of performance is designated as San Diego, California, with a specific zip code of 92136-3581. The contracting organization is the Department of Defense through its San Diego office, indicating the end use of the material is for defense-related purposes. While no point of contact or solicitation number is provided, the official portal for submission and information is accessible via the DIBBS website link provided.

General Info

Seven solution heat-treated cold-rolled steel sheets for defense use, compliant with SAE AMS5604K and MIL-STD-129R, delivered to San Diego.

Agency

Department Of Defense → SAN DIEGOView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SAN DIEGO

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → SAN DIEGO

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 7 sheets of cold-rolled steel, Composition 630, solution heat treated, meeting SAE AMS5604K, ASTM A700-14, and MIL-STD-129R standards.

Similar Contracts

Same NAICS industry code

Supply of Raw Materials and Metal ComponentsThe contract calls for the supply of traceable raw materials including sheet metal, tubing, and gaskets required to fabricate military HVAC duct assemblies, ensuring full compliance with DFARS regulations and applicable material specifications. All materials must be sourced and documented to maintain strict traceability throughout the supply chain, meeting the Department of Defense’s stringent quality and provenance standards for defense-related components. The materials are intended for use in critical military environments, necessitating adherence to exacting performance, durability, and safety criteria. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 26, 2026. It falls under NAICS code 331221, which classifies the industry as rolled metal shape manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, but contract performance is expected to support U.S. military HVAC system fabrication. Interested parties must submit proposals through the DIBBS portal using the provided solicitation reference before the deadline.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

BAR,METALThis contract specifies the procurement of metal bars for use in a critical shipboard system, designated as SPECIAL EMPHASIS material due to the high risk of catastrophic failure if defective or incorrect components are installed. The material must conform to ASTM-A193 Grade B16 and ASTM-A962 standards, with precise dimensional requirements including a diameter of 1 3/4 inches and lengths between 5 and 12 feet, depending on diameter. Supplementary requirements mandate magnetic particle inspection for each bar and macroetch testing once per heat, with strict acceptance criteria for surface discontinuities. Traceability is mandatory from raw material through final delivery, requiring unique heat-lot markings on every item and certification reports that must be directly linked to these markings. The contractor must maintain a quality system aligned with ISO-9001, ISO-10012, and ISO/IEC 17025, or an approved military alternative, and all inspections and certifications must be fully documented and available for government audit. Delivery is subject to a 365-day timeline, with early or incremental shipments permitted at no additional cost. The total contract quantity is 600 units, with a permitted variance of up to 5% below the total. All certification data, including test results and compliance certificates, must be submitted via WAWF to Portsmouth Naval Shipyard for review and acceptance before any shipment, with strict routing instructions for shipment, inspection, and acceptance codes. The government will perform final inspection and acceptance at destination without prior source inspection. The procurement is issued under Emergency Acquisition Flexibilities and includes a 45-day prompt payment term, extended from the standard seven. The contract prohibits mercury in any form and requires strict configuration control, formal Engineering Change Proposals for any design modifications, and prohibits unapproved waivers or deviations, all of which must be submitted through the ECDS system. All documentation, including material certifications, must be positive and unqualified, with no disclaimers permitted, and nonconforming material will be rejected.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

High-Strength Structural Steel Plate Supply (Grade DH36)The contract calls for the supply of structural steel plates measuring 0.375 inches thick and 60 by 240 inches in dimensions, manufactured to Grade DH36 standards in accordance with ABS rules, ensuring high strength and durability for demanding structural applications. Each plate must be accompanied by full mill certification and must comply with applicable military specifications, verifying material integrity, traceability, and performance under operational conditions. The delivery location is specified as New Cumberland, Pennsylvania, with the place of performance tied to the DDSP New Cumberland Facility under the Department of Defense. The solicitation, posted on July 22, 2026, requires proposals to be submitted by August 3, 2026, and is classified as a subcontract under NAICS code 331221 for rolled structural metal product manufacturing. The contract is managed without any set-aside designation, opening participation to all qualified vendors. Bidders must ensure alignment with military-grade requirements and certified material documentation to meet the stringent quality and compliance standards expected by the Defense Logistics Agency. All responses must be submitted through the designated DIBBS platform using the provided solicitation number.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hot-Rolled Carbon Steel Plate SupplyThe contract calls for the supply of hot-rolled carbon steel plates with a thickness of 0.250 inches and dimensions of 48 inches by 96 inches, offered in whole-foot lengths to meet precise dimensional requirements without the need for test coupons. These plates are intended for structural applications and must comply with strict specifications to ensure compatibility and performance in demanding environments. The procurement is structured as a subcontract under NAICS code 331221, indicating classification within the rolling and finishing of steel mills sector, and is managed by the Department of Defense through its Construction and Equipment MRO SVC I organization. Performance of the contract is designated for Tinker Air Force Base, Oklahoma, with a ZIP code of 73145-8000, specifying the physical location where the materials will be delivered and utilized. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with the complete details accessible via the DIBBS platform at the provided URL.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Raw Materials (Alloy Steel or Specialty Metals)The contract seeks the supply of high-grade alloy steel or corrosion-resistant materials specifically for the production of close tolerance screws, with strict adherence to NAS and military material specifications. These materials must meet rigorous quality and performance standards to ensure reliability in defense and aerospace applications. The solicitation is issued as a subcontract under the NAICS code 331221, and the materials are expected to be delivered to the place of performance in Cherry Point, North Carolina, with the zip code 28533-5040. The offering is managed by the ASC Commodities Division of the Department of Defense, indicating this is part of a critical supply chain supporting national defense infrastructure. Interested parties must submit responses no later than July 30, 2026, with the solicitation posted on July 22, 2026. There is no set-aside designation specified, meaning all eligible suppliers may compete without restrictions based on business size or ownership. The contract does not provide a point of contact, requiring vendors to use the provided DIBBS link for full solicitation details and submission procedures. Compliance with material specifications and delivery timelines will be essential, as these components are integral to high-precision assemblies where failure is not an option.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

High-Strength Steel Plate Manufacturing and SupplyThe contract specifies the manufacture and supply of 22 units of quenched and tempered steel plates, Grade B, with a thickness of 0.250 inches, compliant with ASTM A514/A514M-22 and SAE AMS2807C technical standards. Each plate must be permanently marked in accordance with MIL-STD-129 and accompanied by full certification confirming adherence to all material and processing requirements. The work is solicited as a subcontract under the NAICS code 331221, and the performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The offer deadline is August 3, 2026, and the opportunity was posted on July 22, 2026, with the responsible agency identified as the Department of Defense through its DDSP New Cumberland Facility. All deliverables must meet stringent military and industrial specifications to ensure operational reliability and traceability.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Stainless Steel Plate SupplyThe contract is for the supply of stainless steel metal plates in Grade 304, hot rolled and annealed, with a thickness of 0.375 inches and dimensions of 36 inches by 96 inches, to be used for defense logistics purposes. These plates are specified as a physical commodity and must meet exact material and dimensional requirements to ensure compatibility with military equipment and systems. The solicitation is issued under a subcontract arrangement with the NAICS code 331221, indicating classification within the primary metal manufacturing sector, specifically for rolled metal product manufacturing. The contract was posted on July 22, 2026, with a response deadline of August 3, 2026, providing interested suppliers with approximately two weeks to submit bids. Performance of the contract will occur at the New Cumberland facility located in ZIP code 17070-5002, under the oversight of the Department of Defense via the DDSP New Cumberland Facility. The procurement is not subject to any set-aside designation, meaning it is open to all eligible vendors regardless of business size or status. Interested parties must submit their responses through the DIBBS system using the provided link to participate in the procurement process.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

SHEET, METALThe contract calls for 7 sheets of corrosion-resistant cold-rolled steel, solution heat treated to Composition 630, with a thickness of 0.0630 inches, width of 36.0 inches, and length of exactly 10 feet per sheet—no test coupons or deviations in dimensions are permitted. All material must be supplied in whole-foot increments and meet precise specification standards as defined by SAE AMS5604K, MIL-STD-129R, ASTM A700-14, and SAE AMS2807C. Each sheet requires continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions, applied via stamping or stenciling using noncontaminating, waterproof ink visible to the unaided eye. Adhesive labels are mandatory for units under 0.250 inches in nominal thickness, and no sheet will be accepted without full compliance. A Certificate of Quality Compliance, or mill certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E, with special preservation code ZZ per ASTM A700, and palletization in accordance with DLA packaging requirements. Labeling and marking must also conform to MIL-STD-129, and when multiple units are specified, both must be indicated on the shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliant offers must explicitly state deviations—failure to comply may result in rejection of the product or criminal penalties. The delivery point is FOB origin, with inspection and acceptance at destination, and the original required delivery date is November 26, 2026, with a contract delivery date of 167 days after award. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and no source inspection is required for qualified suppliers under the QSL program.

POSTED

DEADLINE

PLATE, METALThis contract specifies the procurement of a steel structural plate measuring 0.750 inches thick, 96 inches wide, and 240 inches long, weighing approximately 3570 pounds per unit, manufactured to Grade DH36, normalized, in compliance with American Bureau of Shipping (ABS) rules for steel vessels. The material must be produced by an approved steel mill and marked with the letters "AB" per MIL-S-22698 requirements. Absolute compliance with ABS standards is mandatory, with no substitutions permitted. All material must be accompanied by a Certificate of Quality Compliance and a metal certification, both of which must be submitted with each shipment and forwarded to the DLA Contracting Officer. The plate must be delivered in whole-foot increments and marked with specific information including the DLA contract number, NSN, specification revision, grade, manufacturer details, heat and lot numbers, and dimensions using permissible methods such as stenciling or stamping—adhesive labels are required for smaller bars and tubes. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement invalidates the bid unless explicitly noted. Mercury or mercury-containing compounds are prohibited from intentional addition or contact with the delivered hardware, except in functional applications such as batteries or fluorescent lamps, which must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and RP001 standards, with preservation and marking following ASTM A700 and MIL-STD-129R. Each shipment must be marked with dual unit quantities when applicable, and all items must be protected from physical damage during transit using approved cushioning and bracing materials. Delivery is FOB origin with a 167-day lead time to the DDSP New Cumberland Facility in Pennsylvania. The contract is a total small business set-aside under NAICS code 331221, and acceptance occurs at the destination point without source inspection waived for qualified suppliers.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PLATE, METALThe contract specifies the procurement of a steel plate measuring 0.250 inches thick, 48 inches wide, and 96 inches long, weighing approximately 326 pounds per piece, manufactured to Grade B and processed via quenching and tempering in accordance with ASTM A514/A514M-22 and SAE AMS2807C standards. Each unit must be identified with continuous markings including the DLA contract delivery order number, NSN, specification number and revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and exact dimensions, using either stamping or stenciling methods that ensure legibility, durability, and resistance to contamination or degradation. The material must be supplied in whole-foot lengths only and accompanied by a Certificate of Quality Compliance with every shipment, submitted to both the end customer and the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement constitutes a non-compliant bid. Packaging and labeling must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with special preservation code ZZ as defined by ASTM A700, and all items must be palletized and protected against physical and mechanical damage during transit. The delivery is FOB origin, with exact quantity fixed at 22 pieces, no variance allowed, and the required delivery date is November 30, 2026, with a 167-day lead time. Inspection and acceptance occur at destination, and all documentation, including CDRLs and technical data, must be reviewed under the DLA Master List of Technical and Quality Requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PLATE, METALThis contract specifies the procurement of steel structural carbon hot rolled plate measuring 0.250 inches thick, 48 inches wide, and 96 inches long, with a reference weight of 326.7 pounds per unit. All material must strictly conform to exact dimensions with no test coupons permitted, and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, or Mill-Material Certification, is required with every shipment and must be forwarded to the DLA Troop Support Contracting Officer. Each unit must be permanently marked with mandatory identification details including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling that are legible, waterproof, and non-contaminating. Adhesive labels are required for smaller bars and tubes under 0.250 inches in nominal diameter, and tags are acceptable for wires. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129R, with preservation methods aligned to ASTM A700, and palletization compliant with DLA packaging requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and deviations from this requirement must be explicitly declared; non-compliance may be treated as an unauthorized substitution with potential criminal penalties. The material must meet ASTM A36/A36M-19, ASTM A6/A6M-24B, SAE AMS2807C, and MIL-STD-129R standards, with technical data packages and CDRL-METALSCERT documentation governing compliance. Two delivery lines are specified—11 units to Tinker AFB, Oklahoma, and 33 units to Tracy, California—with a 56-day delivery window and zero quantity variance allowed. Acceptance occurs at destination, and failure to meet any requirement may result in rejection.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

PLATE, METALThe contract specifies the procurement of a steel structural plate measuring 0.375 inches thick, 60 inches wide, and 240 inches long, weighing approximately 1530 pounds per unit, manufactured to Grade DH36 per the American Bureau of Shipping (ABS) Rules for Building and Classifying Steel Vessels, with mandatory compliance to MIL-S-22698 and inclusion of the "AB" marking. The material must originate from an approved steel mill and is subject to strict certification requirements including an ABS Surveyor’s endorsement on all certificates. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible, and any deviation or non-compliance constitutes an unauthorized substitution with potential criminal penalties. Every shipment must include a Certificate of Quality Compliance and a Metal Certification, both submitted to the DLA Troop Support Contracting Officer, with continuous identification markings on each plate indicating the contract number, NSN, specification, grade, manufacturer, heat and lot number, and dimensions. Markings must be legible, durable, and applied via stamping or stenciling using non-contaminating fluids, with adhesive labels permitted for smaller items. The plate must be supplied in whole-foot increments only, and packaging must adhere to MIL-STD-2073-1E and RP001, with preservation per ASTM A700 and labeling per MIL-STD-129. Mercury or mercury compounds may not be intentionally introduced except in functional components like fluorescent lamps, which must contain a secondary containment barrier per NAVSEA 5100-003D. The delivery is FOB origin with a 167-day timeline, shipment to the DLA Distribution facility in New Cumberland, Pennsylvania, and no quantity variance permitted. Compliance with all referenced technical and quality requirements from the DLA Master List is mandatory.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

VALVE, EXPANSIONThis contract, issued under solicitation number SPE7MC-26-T-134L by the Defense Logistics Agency (DLA), is for the procurement of 35 expansion valves identified by NSN 4820015723452, at a unit price of $35.000, totaling $1,225.00. Delivery is required within 65 days of award, with FOB Origin terms applying to shipment, while inspection and acceptance occur at the destination—DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The contractor must package and mark all items in strict accordance with MIL-STD-129 for labeling and barcoding, and ASTM D3951 for commercial packaging, with DLA’s Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Palletization must conform to RP001, and all packaging must be shock-proof with a secondary containment for mercury-containing components such as portable fluorescent lamps or instruments, in compliance with NAVSEA 5100-003D, unless the mercury is part of a functional component explicitly permitted such as batteries, sensors, or chemical reagents authorized by NAVSEA. The use of mercury or mercury-containing compounds in any other hardware or supply is strictly prohibited. The contract mandates adherence to numerous federal acquisition regulations including FAR 52.246-2 for destination inspection, 52.222-36 for equal opportunity for workers with disabilities, 52.223-3 for hazardous materials identification, and DFARS clauses covering cybersecurity compliance including 252.204-7012 for safeguarding covered defense information and 252.240-7997 for NIST SP 800-171 assessment submissions. Contractors must also prohibit the use of covered defense telecommunications equipment from specified foreign entities and comply with the hazardous materials labeling requirements under 252.223-7001 and the Hazard Communication Standard. Payment must be processed electronically through WAWF using the appropriate document types for fixed-price line items, and all offerors must provide a valid Unique Entity Identifier (UEI) and CAGE code. No additional attachments or special provisions beyond those referenced are included, and proposals must be submitted exclusively via the D

Industrial Valve Manufacturing

POSTED

DEADLINE

Quality Inspection & Test Reporting ServicesThe contract requires the performance of origin inspections and the generation of hydrostatic test reports for valves and hardware to ensure full compliance with specified contract requirements and Federal Acquisition Regulation 52.246-2. The work involves verifying the integrity and conformity of critical components through rigorous testing and documentation processes, with a focus on quality assurance and adherence to defense standards. All inspections and test reports must be accurately recorded and submitted to confirm that delivered items meet technical and regulatory benchmarks. The solicitation is classified as a subcontract under NAICS code 541380, issued by the Department of Defense through its San Diego office, with performance location set at 92136-3581 in San Diego. The opportunity was posted on July 23, 2026, and responses are due by August 3, 2026. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline, ensuring all technical and administrative requirements are fully addressed to be considered for award.

Testing Laboratories and Services

POSTED

DEADLINE

Defense Logistics & Ocean Transport ComplianceThe contract requires the management of ocean transportation for defense supplies using U.S.-flagged vessels, strictly adhering to DFARS 252.247-7023 and Buy American standards to ensure compliance with federal procurement regulations. All transport activities must be carried out using vessels registered under the U.S. flag and must source materials and services in accordance with domestic content requirements, ensuring that no foreign-substituted components or services undermine national security supply chain integrity. The performance location is designated as San Diego, California, with all logistics operations centered around this port to support Department of Defense requirements. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 3, 2026, under the NAICS code 483111 for Ocean Freight Transportation. The contracting organization is the Department of Defense, specifically operating through the San Diego office, and the primary focus is on securing reliable, compliant, and secure maritime logistics capabilities for critical defense material movement. Participation requires proven experience in defense logistics, demonstrated compliance with federal maritime and Buy American statutes, and the ability to maintain rigorous documentation and audit readiness throughout the contract period.

Deep Sea Freight Transportation

POSTED

DEADLINE

Hazardous Materials Packaging & Marking ServicesThe contract requires the provision of packaging, labeling, and marking services for defense hardware that has been exposed to hazardous materials, including mercury, with strict adherence to military and federal safety regulations. All work must ensure the secure containment and proper identification of contaminated items to prevent environmental and personnel exposure, in full compliance with applicable Department of Defense and federal environmental protection standards. The services are critical to the safe handling, storage, and transportation of sensitive military equipment, requiring specialized knowledge in hazardous material protocols and documentation. This is a subcontract opportunity under NAICS code 561910, issued by the Department of Defense through its San Diego office, with performance required at a location in San Diego, California, zip code 92136-3581. The solicitation was posted on July 23, 2026, and responses must be submitted by August 3, 2026. The contract is not subject to any specific set-aside classification and is intended for qualified subcontractors capable of meeting rigorous defense logistics and hazardous materials handling requirements. All proposals must demonstrate proven experience in similar high-compliance environments and the ability to deliver services on schedule under stringent regulatory oversight.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Valve Manufacturing & SupplyThe contract pertains to the manufacture and supply of angle and globe valves rated for 250 PSI and sized at 1.5 inches, specifically designed for use in water or steam systems and compliant with military specifications. These valves must meet rigorous performance and durability standards expected in defense-grade applications, ensuring reliability under demanding operational conditions. The work is to be performed in San Diego, California, with the zip code 92136-3581 designated as the place of performance, indicating the location where the contracted goods will be delivered or utilized. Issued as a subcontract under the NAICS code 332912, which classifies other fabricated metal product manufacturing, this procurement is managed by the Department of Defense through its San Diego office. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, providing interested parties with a limited window to submit proposals. The contract is not subject to any specific set-aside designation, meaning it is open to all qualified submitter types. The official solicitation can be accessed online through the DIBBS procurement portal using the provided link, through which full technical requirements and submission instructions are available.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Cybersecurity and CUI Compliance SupportThe contract seeks support for achieving and maintaining NIST SP 800-171 compliance across systems handling Controlled Unclassified Information, with a focus on implementing required security controls, conducting comprehensive system assessments, and ensuring timely cyber incident reporting in accordance with DFARS regulatory requirements. Services must align with the Department of Defense’s cybersecurity standards and be delivered by a certified Women-Owned Small Business under the WOSB Set-Aside program, targeting the 92136-3581 performance location in San Diego. The solicitation, issued under NAICS code 541512 for Computer Systems Design Services, is structured as a subcontract and requires responses by August 3, 2026. Participation is restricted to eligible women-owned small businesses, and the work will be performed under the oversight of the Department of Defense, specifically through the San Diego office. The contract emphasizes operational readiness and continuous compliance, demanding rigorous adherence to federal cybersecurity frameworks and the ability to document and report all security postures and incident responses accurately and promptly.

Computer Systems Design Services

POSTED

DEADLINE

Domestic and International Transportation of SuppliesThe contract involves the domestic and international transportation of defense supplies, with specific requirements to utilize U.S.-flag vessels for any ocean transport segments. Freight movement begins at FOB Origin for domestic shipments, meaning the contractor assumes responsibility once goods leave the origin point. The work is classified under NAICS code 484220, indicating it pertains to truck transportation of freight, though the scope extends beyond ground transport to include potential maritime logistics. This is a subcontract opportunity set aside exclusively for Women-Owned Small Businesses, limiting eligibility to qualified firms meeting ownership and control criteria. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026. Performance is centered in San Diego, California, with the exact delivery and pickup locations tied to Department of Defense requirements in the 92136-3581 area, though specific destinations or origins beyond that are not detailed.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging, Labeling, and Hazardous Material Compliance ServicesThe contract requires compliance with DLA packaging and labeling standards, including the provision of Safety Data Sheets and accurate hazardous material identification in accordance with Federal Standard No. 313 and OSHA regulations. All deliverables must adhere to federal safety and transportation guidelines to ensure proper handling, storage, and communication of hazardous substances throughout the supply chain. The work is scoped under a Women-Owned Small Business Set-Aside and falls under NAICS code 561910 for other support services, indicating the focus on specialized logistics and compliance services rather than direct manufacturing. The contract is issued by the Department of Defense through its San Diego office with a place of performance located at 92136-3581. Responses must be submitted by August 3, 2026, and the solicitation is available through the DIBBS portal. This subcontract opportunity is targeted for eligible Women-Owned Small Businesses seeking to provide regulatory-compliant packaging and labeling solutions for defense-related logistics systems, with performance centered in San Diego. All work must meet stringent federal standards to support safe and lawful material movement within military and government supply chains.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Check Valves (NSN: 4820014545718)The contract titled Supply of Check Valves (NSN 4820014545718) is a subcontract under a Women-Owned Small Business Set-Aside, issued by the Department of Defense through its San Diego office, with performance required in San Diego, California, specifically at zip code 92136-3581. It calls for the procurement, packaging, labeling, and delivery of exactly 30 check valves that must fully comply with defense logistics standards, including all mandatory hazardous material disclosures and transportation regulations. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, with the North American Industry Classification System code 332912 indicating the scope falls under Other Fabricated Metal Product Manufacturing. All work must adhere to stringent military quality and safety protocols, ensuring that every valve is properly documented, labeled for hazardous content, and transported in accordance with federal defense logistics requirements.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Quality Assurance & Technical ComplianceThe contract requires strict adherence to technical specifications for valves delivered under a small business set-aside, ensuring all products meet the Department of Defense’s quality assurance standards as defined in DFARS 252.246-7003. Compliance is non-negotiable, with the supplier responsible for verifying that each valve performs to required engineering and performance criteria and passes all DLA quality inspections without deviation. The solicitation is restricted to total small businesses as defined by the SBA, with the NAICS code 541330 indicating the work involves scientific and technical consulting services tied to engineering and quality control. The place of performance is specified as San Diego, CA, with all deliverables expected to be completed and submitted by the deadline of August 3, 2026, and the contract was posted on July 23, 2026, under a subcontract structure managed by the Defense Logistics Agency.

Engineering Services

POSTED

DEADLINE

Transportation & Logistics (FOB Origin)This contract requires the arraignment and execution of transportation services for valves from the supplier’s origin to DLA Distribution in San Diego, California, with strict adherence to Department of Defense shipping protocols. The shipment must comply with all DLA procedures, ensuring timely and secure delivery to the specified destination address, 92136-3581. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns eligible under SBA guidelines may respond, and it falls under NAICS code 484220, which covers truck transportation for specialized freight. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and is managed by the Department of Defense through its San Diego office, with performance required at the San Diego distribution center.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazard Communication & Labeling ComplianceThis contract requires the provision of hazard warning labels that fully comply with DFARS 252.223-7001, ensuring all chemical hazards are accurately communicated in alignment with Department of Defense regulations. The labeling must also adhere to OSHA 29 CFR 1910.1200 for workplace hazard communication and MIL-STD-129 for standardized military marking requirements, covering format, content, durability, and placement to meet federal and defense specifications. The work is part of a small business set-aside under the SBA program, reserved exclusively for total small business concerns, and falls under NAICS code 541690 for other scientific and technical consulting services. Performance is required at a designated location in San Diego, CA, with a response deadline of August 3, 2026, and the solicitation is issued by the Department of Defense under the agency name SAN DIEGO.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE