Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Subcontract opportunity from Department Of Defense was posted on August 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

COTS Component Sourcing and Resale of Clamp, Loop (NSN: 5340016229048)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423830
New
DIBBS
Hose Assembly Supply (PN: 4720-LN0015048)This subcontract involves the supply of one Hose Assembly, part number 4720-LN0015048, to support prime contractors fulfilling DLA supply contracts. The provider is required to source either the original equipment manufacturer part or a certified equivalent. Strict adherence to Department of Defense standards is mandatory, including packaging per ASTM D3951, marking and labeling according to MIL-STD-129, and palletization following RP001 DLA Packaging Requirements. The contract is managed by the DLA Fleet Readiness Center under the Department of Defense, with the place of performance located in zip code 28533-0021. The successful contractor must deliver the completed hose assembly within 30 days after receiving the order. This procurement falls under NAICS code 423830.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 7 hours ago

DEADLINE

in 5 days
NAICS: 423830
New
DIBBS
Supply and Testing of Debris Blowers (Power Breezers)
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 7 days
NAICS: 423830
New
SLED
Multi-Purpose Welding Power Source Supply and Setup
Carroll Community College

POSTED

about 7 hours ago

DEADLINE

in 21 days
NAICS: 423830
New
DIBBS
Supply of Manual Control Handles (NSN 5340013164238)
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 5 days
NAICS: 423830
New
DIBBS
Supply of Air Strainers (NSN 2815-15-100-0721)
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 7 hours ago

DEADLINE

in 11 days
NAICS: 423830
New
SLED
Water Treatment Equipment Supply
HARRIS COUNTY DEPT OF EDUCATION

POSTED

about 10 hours ago

DEADLINE

in 26 days
NAICS: 423830
New
Federal
OEM or Authorized Component SupplyThis subcontract, titled OEM or Authorized Component Supply, involves the procurement and delivery of hardware, components, and spare parts for prime contractors supporting Department of Defense supply contracts. Managed by the Aviation Logistics Center under the Department of Homeland Security, the scope of work requires the delivery of physical components identified by National Stock Number and Part Number, accompanied by necessary inspection documentation. The contractor must adhere to strict shipping and reporting standards, including the preparation of DD Form 250 Material Inspection and Receiving Reports and the inclusion of serial and line item numbers. Additionally, the provider must ensure full compliance with the Buy American Act and Section 889 regulations. The solicitation was posted on November 13, 2026, with a response deadline of November 19, 2026, falling under NAICS code 423830.
Aviation Logistics Center (ALC)(00038)

POSTED

about 12 hours ago

DEADLINE

in 6 days
NAICS: 423830
New
Federal
Diesel Forklift Supply (6,000 lbs Capacity)
W6QM Micc-Ft Drum

POSTED

about 12 hours ago

DEADLINE

in 6 days
NAICS: 423830
New
Federal
MAKO Breathing Air Compressor Service Parts Supply
CG-SEA-C22

POSTED

about 12 hours ago

DEADLINE

in 5 days
NAICS: 423830
New
Federal
Radiodetection 8200SG Locator Kit and Accessories
Brookhaven National Labor -Doe Contractor

POSTED

about 12 hours ago

DEADLINE

in 4 days
NAICS: 423830
New
Federal
CGC CALHOUN MAKO Breathing Air compressor parts
Solicitation # 70ZU0227N00001051
The United States Coast Guard, on behalf of the Surface Forces Logistics Center, is seeking a firm-fixed-price supply contract for MAKO Breathing Air Compressor service parts to support SCBA bottle refilling capabilities aboard the CGC CALHOUN. This unrestricted acquisition falls under NAICS code 333912 and Product Service Code 4310. All required parts must be delivered on an F.O.B. Destination basis to North Charleston, South Carolina, by January 22, 2027. Award will be granted to the responsible offeror who provides the lowest evaluated price while meeting a pass/fail criteria for technical capability and past performance. Technical capability is determined by the offeror's understanding of the work statement and strict adherence to specifications, while past performance is based on satisfactory execution of similar work within the last three years. Offers must be all-inclusive of all costs, including manufacturing and transportation, and must be submitted electronically. The solicitation incorporates various FAR clauses, including Buy American requirements, hazardous material identification, and prohibitions on certain telecommunications and video surveillance equipment.
CG-SEA-C22

POSTED

about 12 hours ago

DEADLINE

in 5 days
NAICS: 423830
New
SLED
Supply of Nylon Web Slings
Nashville Electric Service

POSTED

about 18 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

This subcontract through the Department of Defense Land Supply Chain involves the sourcing and resale of the Clamp, Loop, identified by NSN 5340016229048. The selected provider must acquire the component as a commercial off-the-shelf item from authorized distributors, ensuring that all deliveries are accompanied by full traceability and conformance documentation. The project is categorized under NAICS code 423830 and will be performed at Fort Bragg, zip code 28310. Interested parties must submit their responses by the deadline of August 31, 2026, following the posting date of August 19, 2026.

General Info

DoD subcontract for sourcing and reselling Loop Clamps at Fort Bragg by August 2026.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

423830 - Industrial Machinery and Equipment Merchant Wholesalers

Place of Performance

FORT BRAGG, NC, 28310, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-T-994H.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLAMP, LOOP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Source and resell the CLAMP, LOOP (NSN 5340016229048) as a COTS item from authorized distributors with full traceability and conformance documentation.

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339999
New
DIBBS
Preformed Packing Supply
All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L1-26-T-827F
The contract specifies the procurement of preformed packing items under solicitation SPE7L1-26-T-827F, with a quantity of 40 units to be delivered within 54 days to DLA Distribution Albany, Georgia. The item, identified by NSN 5330-15-032-5642, must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1 — a medium duty, waterproof, greaseproof, and opaque bag — due to the sensitivity of Federal Supply Classifications 5330/5331 to ultraviolet degradation. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA packaging requirements. The delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Mercury or mercury-containing compounds are prohibited except in defined functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shock-proof construction and secondary containment as per NAVSEA 5100-003D. Asbestos is strictly forbidden. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions based on solicitation or award dates depending on acquisition type. Documentation for source approval and hazardous material shipping must follow specified protocols, including the parcel post and freight shipping addresses provided. The point of contact for inquiries is Katherine Woods, and the solicitation response deadline is July 23, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTR
Solicitation # SPE7L1-26-T-949T
This contract, issued under solicitation SPE7L1-26-T-949T by the Defense Logistics Agency Land and Maritime Land Supply Chain, is a total small business set-aside for the procurement of 11 units of a manual handle identified by NSN 5340013164238 and part number E601M6-8, supplied by SAFRAN ELECTRONICS & DEFENSE, AVIONICS 879B2. The contract mandates delivery FOB origin with a 101-day lead time following receipt of order, with the required delivery date set for February 2, 2027, and a need ship date of December 1, 2026. All items must be delivered to DLA Distribution Cherry Point in North Carolina, and inspection and acceptance occur at the destination point per FAR 52.246-2, requiring conformity with MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based sampling plan, where critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Packaging must adhere strictly to RP001: DLA Packaging Requirements for Procurement, with non-hazardous items commercially packaged per ASTM D3951 under the overarching authority of the DLA Master List of Technical and Quality Requirements, while hazardous materials must comply with TQ requirement IP025 and be labeled according to 29 CFR 1910.1200. All packaging and labeling must follow MIL-STD-129, including palletization and marking for radioactive materials above specified thresholds. The offeror must submit a Safety Data Sheet prior to award, and the use of additive manufacturing is strictly prohibited unless explicitly authorized. Compliance with the Buy American Act and Berry Amendment is required, and the order is certified as a DX or DO rated priority under the Defense Priorities and Allocations System. The contractor must be registered in SAM, maintain an active UEI and CAGE code, and certify non-provision of covered telecommunications equipment per FAR 52.204-24 and DFARS 252.204-7016. All payment processing must occur via Wide Area Workflow (WAWF), and the
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE7L1-26-T-684M
This solicitation, number SPE7L1-26-T-684M, is issued by the Department of Defense Land Supply Chain for the procurement of 172 hexagon head cap screws. The items are identified as commercial critical application items under NSN 5305150273099 and Iveco Defence Vehicles S.p.A. part number 5802165981. The contract falls under NAICS code 332722 and requires delivery to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of November 28, 2026, and a need ship date of December 6, 2026. The agreement mandates strict adherence to technical and quality requirements, including DLA packaging requirements and MIL-STD-129 marking standards. Sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance. Delivery is set as FOB Origin, while the inspection and acceptance points are designated as the destination. The solicitation was posted on June 9, 2026, with a response deadline of June 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332312
New
DIBBS
Supply of Access Covers (NSN 5340007058039)This subcontract involves the fabrication and supply of 153 specialized access covers under NSN 5340007058039 for the Department of Defense Land Supply Chain. The contractor is required to manufacture these units according to strict technical specifications using ISO 9001:2015 quality systems, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Performance of the contract will take place in Tracy, California. To ensure the security of ITAR and EAR technical data, the provider must maintain CMMC Level 2 and NIST SP 800-171 compliance, as well as certification through the US/Canada Joint Certification Program. The procurement falls under NAICS code 332312 and is intended to support prime contractors fulfilling Defense Logistics Agency supply requirements.
Fabricated Structural Metal Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332710
New
DIBBS
Piston Pin Supply (NSN 2815-01-7000592)This subcontract through the Department of Defense Land Supply Chain requires the procurement of 29 specialized piston pins identified by NSN 2815-01-7000592. The selected provider must be capable of manufacturing or sourcing these pins in strict accordance with the DLA Master List of Technical and Quality Requirements and RP001 packaging standards to support prime contractors. Eligible bidders must possess a valid CAGE code and active SAM registration. The performance of this contract is centered in Tracy, California, with a response deadline set for November 17, 2026.
Machine Shops

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
Counterbalance Weight Supply (NSN 3040-01-347-4449)This subcontract involves the supply of one counterbalance weight, identified by NSN 3040-01-347-4449, for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider is responsible for manufacturing or sourcing the part to meet all required technical specifications, with the option to employ additive manufacturing for items requiring Engineering Support Activity evaluation. Delivery will be handled via First Destination Transportation to the designated location. Managed by the Department of Defense under the Land Supply Chain agency, the contract falls under NAICS code 332999. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 12, 2026, with a response deadline set for November 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-14L2
Solicitation SPE7L1-26-T-14L2 is a procurement issued by the Defense Logistics Agency (DLA) Land Supply Chain for 176 units of Access Covers (NSN 5340-00-705-8039). The contract is managed under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is July 1, 2027, with a need ship date of March 9, 2027, for delivery to the DLA Distribution San Joaquin facility in Tracy, California. The manufacturer must maintain a quality management system compliant with ISO 9001:2015 or an equivalent standard, and inspection and acceptance will occur at the point of origin. The procurement includes stringent technical and security requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for fastener protection and hazardous material labeling per 29 CFR 1910.1200. Administrative processes, including invoicing and payment requests, must be handled electronically through the Wide Area WorkFlow (WAWF) system.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 331529
New
DIBBS
WEIGHT, COUNTERBALANCE
Solicitation # SPE7L1-26-T-926L
Solicitation SPE7L1-26-T-926L is a small business set-aside request for quotations issued by the Department of Defense Defense Logistics Agency Land Supply Chain for the procurement of one counterbalance weight, identified by NSN 3040-01-347-4449. The item is to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of June 4, 2027, and a delivery period of 168 days. Shipping is designated as FOB Origin, utilizing the First Destination Transportation program to optimize costs. The contract mandates strict adherence to technical and quality requirements from the DLA Master List, including tailored higher-level quality requirements and specific packaging standards per MIL-STD-2073-1E and MIL-STD-129. Security and compliance obligations are significant, featuring requirements for Cybersecurity Maturity Model Certification Level 2, safeguarding of covered defense information, and strict export controls under ITAR and EAR. Additionally, the contractor must comply with domestic material restrictions, including the Berry Amendment and Buy American Act, and is prohibited from using Class I ozone-depleting chemicals or hexavalent chromium. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Other Nonferrous Metal Foundries (except Die-Casting)

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-665W
Solicitation SPE7L1-26-T-665W is a small business set-aside Request for Quotations issued by the Department of Defense, DLA Land and Maritime Land Supply Chain, for the procurement of 153 units of Access Covers (NSN 5340-00-705-8039). The contract specifies a delivery period of 10 days, with a need ship date of June 26, 2026, and a required delivery date of February 22, 2027. Delivery is FOB Origin, with the consignee being DLA Dist San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including ISO 9001:2015 for manufacturer inspection systems and MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Cybersecurity requirements include CMMC Level 2 certification and compliance with NIST SP 800-171. Additionally, the item is subject to export controls under ITAR or EAR, requiring approved US/Canada Joint Certification Program certification for access to technical data. Payment processing must be conducted electronically via the Wide Area WorkFlow system.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333618
New
DIBBS
PIN, PISTON
Solicitation # SPE7L1-26-T-00P6
Solicitation SPE7L1-26-T-00P6 is a Request for Quotations issued by the Department of Defense Land Supply Chain for the procurement of 29 piston pins under NSN 2815-01-700-0592. This acquisition is designated as a small business set-aside under NAICS code 333618. The required delivery date is February 12, 2027, with a need ship date of February 16, 2027. Delivery is established as FOB Origin under the First Destination Transportation program, with the final destination, inspection, and acceptance point located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific requirements for preservation and container types. It prohibits the use of Class I ozone-depleting chemicals and hexavalent chromium. Compliance with various FAR and DFARS clauses is required, including Buy American and Balance of Payments programs, cybersecurity reporting under NIST SP 800-171, and the prohibition of covered defense telecommunications equipment. All payment requests and receiving reports must be processed electronically via the Wide Area WorkFlow system. Offerors are cautioned that parts produced using additive manufacturing are ineligible for award.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access
Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS