This Solicitation opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
COUNTER, ROTATING
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract solicitation SPE4A5-26-T-315E is for the procurement of 10 units of a Counter, Rotating item, identified by NSN 6680008522733, to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery schedule of 192 days after award. The item must conform to U.S. Army Armament Research and Development Center Drawing 8267727, Revision G, dated October 19, 1992, with approved source items originating from DYNAPAR Corporation (CAGE 79142, P/N 199624-006) or Eaton Corporation (CAGE 18911, P/N 4-Y-40582-400-L-CL). The contract enforces strict compliance with the DLA Master List of Technical and Quality Requirements, which supersedes all other standards, including ASTM D3951 for packaging. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit pack quantities specified per the purchase order. Inspection and acceptance are conducted at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, requiring zero non-conformances unless otherwise stated, and unspecified attributes are treated as major. Physical identification of bare items must follow RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. The item is not subject to shelf life or Item Unique Identification requirements under DFARS 252.211-7003(c)(1)(i). Contract administration requires electronic invoicing via WAWF, and all cybersecurity obligations are enforced through 252.204-7012 for safeguarding covered defense information and reporting cyber incidents. The contract includes clauses prohibiting the use of hexavalent chromium, toxic materials, covered defense telecommunications equipment, and mandatory arbitration agreements, while also mandating employment eligibility verification, combating human trafficking, and sustainable product usage. The point of contact for contract administration is Hien-Van Trinh of DLA, reachable via email and phone. The total contract value is $963.00 for the base quantity, with no options,
General Info
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
COUNTER, ROTATING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SINGLE REGISTER, FOUR FIGURES, LEFT END SHAFT<(>,<)>
CONFIGURATION CONTROL ITEM IAW U.S. ARMY ARMAMENT RESEARCH AND
DEVELOPMENT CENTER, CAGE 19200, DRAWING 8267727, REV G, DATED
10/19/1992, PART NUMBER 8267727 SOURCE(S): DYNAPAR
CORPORATION(VEEDER-ROOT CO), CAGE 79142, P/N 199624-006 EATON
CORPORATION, CAGE 18911, PART NUMBER 4-Y-40582-400L-CL
SPE4A5-26-T-315E
SECTION B
DYNAPAR CORP 79142 P/N 199624-006
EATON CORP COUNT CONTROL/SYSTEMS 18911 P/N 4-Y-40582-400-L-CL
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017696548 0001 EA 10.000
NSN/MATERIAL:6680008522733
DELIVERY (IN DAYS):0192
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A5-26-T-315E
SECTION B
PR: 7017696548 PRLI: 0001 CONT’D
Need Ship Date:02/16/2027 Original Required Delivery Date:02/16/2027
SPE4A5-26-T-315E NSN/Part Number: 6680-00-852-2733 Quantity: 10 EA Purchase Request: 7017696548QTY: 10 Delivery: 192 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
Same awarding agency
Earlier notices in this NAICS code
Posted before this notice, open and closed
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS