Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COUPLING ASSEMBLY, HOSE

Active
SPE8E9-26-T-3300Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of four coupling assemblies, hose, fire fighting, identified by NSN 4210-00-368-2904 and part number 502, manufactured by Service Brass and Aluminum Foundry in Phoenix, AZ. Each coupling is brass with both ends female, featuring a 2-1/2 inch NH swivel interface with eight flat lugs and must be marked in accordance with MIL-STD-130 Section 5.3.1. Configuration control follows MIL-STD-973, excluding specific subparts. The product must not contain intentionally added mercury or mercury-containing compounds, except for limited functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. Delivery is scheduled for 167 days after award, with FOB origin terms, zero variance allowed in quantity, and inspection and acceptance occurring at the destination. The shipment must be sent to the DLA Distribution facility in New Cumberland, PA, under the parcel post address provided, and transportation instructions follow DLAD Proc Notes C19 and C20. The original required delivery date is October 27, 2026, with a needed ship date of February 1, 2027. The solicitation was issued under SPE8E9-26-T-3300 with a response deadline of August 17, 2026, and is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with covered defense information potentially applicable. The unit of issue is each (EA), and the contract falls under NAICS code 333998 with the Department of Defense as the contracting agency.

General Info

Four brass coupling assemblies, NSN 4210-00-368-2904, delivered to New Cumberland, PA by Feb 1, 2027, per MIL-STD specs.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E9-26-T-3300.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COUPLING ASSEMBLY,HOSE,FIRE FIGHTING
COUPLING ASSEMBLY, HOSE, FIRE FIGHTING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SERVICE BRASS AND ALUMINUM FOUNDRY
PHOENIX AZ
ADDITIONAL INFORMATION: BRASS, BOTH ENDS FEMALE
SWIVEL,2-1/2 INCH NH (7-1/2 TPI) EIGHT FLAT LUGS
MARK IN ACCORDANCE WITH SEC. 5.3.1 (A THRU D) OF
MIL-STD 130.
.
CONFIGURATION CONTROL PER MIL-STD-973. PARAGRAPH
5.4 EXCEPT FOR SUBPARAGRAPHS 5.4.2.3.5.1 AND
5.4.2.3.5.2.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SERVICE BRASS AND ALUMINUM FOUNDRY CO, 91643 P/N 502
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E9-26-T-3300
SECTION B
PR: 7017757021 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757021 0001 EA 4.000
NSN/MATERIAL:4210003682904
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:DA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E6 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:10/27/2026
SPE8E9-26-T-3300 NSN/Part Number: 4210-00-368-2904 Quantity: 4 EA Purchase Request: 7017757021QTY: 4 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1567
The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, CYLINDER ST
Solicitation # SPE8E9-26-T-3323
The contract pertains to the procurement of a BRACKET, CYLINDER ST with NSN 4210-01-141-4027 and part number 52427, supplied by TYCO FIRE PRODUCTS LP. A total of 27 units are required at a unit price of $27.00, resulting in a total contract value of $729.00. Delivery is scheduled to occur within 167 days from the contract date, with FOB origin terms and inspection and acceptance points set at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a commercial item, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation timeline. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and the shipment must comply with DLA transportation notes C19 and C20 for freight and first destination handling. The required ship date is February 1, 2027, and the original delivery deadline is April 16, 2027. The solicitation was issued under contract number SPE8E9-26-T-3323, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Service I under NAICS code 333998.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
HEAD, SPRINKLER, FIRE
Solicitation # SPE8E6-26-T-4007
This contract pertains to the procurement of four brass fire protection sprinkler heads, specifically the Bete Fog Nozzle model 2-1/2 inch SCF70W, identified by NSN 4210-01-386-3436, under solicitation SPE8E6-26-T-4007. The items must be delivered FOB origin within 167 days of contract award, with delivery required by February 1, 2027, despite an original required date of November 15, 2026. The quantity is fixed at four units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and codes, while palletization follows DLA’s RP001 requirements. Hazardous materials guidelines are strictly enforced, prohibiting intentional use of mercury or mercury-containing compounds unless explicitly exempted, such as in certain batteries or instruments, which must include secondary containment per NAVSEA 5100-003D. All shipments must be labeled and addressed to DLA Distribution at the New Cumberland, Pennsylvania facility, following DLA’s transportation and shipping protocols. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. The contract prohibits the inclusion of covered defense information and mandates full compliance with all applicable federal procurement and safety standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8E6-26-T-3992
The contract specifies the procurement of a fire fighting hose reducer, part number 13218E0470-42, constructed from cast or forged brass in accordance with MIL-DTL-52404C, featuring a 2.5-inch National Hose internal thread with swivel and a 1.5-inch National Hose external thread. Plating is not required, and first article testing is mandatory with two units submitted for testing under government quality assurance representative observation, as dictated by MIL-C-52404C and referenced quality assurance provisions. The item is governed by strict inspection and acceptance protocols at origin, with sampling to comply with MIL-STD-1916 or comparable zero-based plans, and non-conformances not permitted unless otherwise specified. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking requirements. The contract includes a separate line item for the first article test unit priced at $1.00, which is non-reimbursable if the test requirement is waived, and the main procurement line item for 11 units at $11.00 each totaling $121.00, with delivery required within 227 days FOB origin to the DLA New Cumberland facility. All technical and quality requirements referenced are incorporated via the DLA Master List, including specific provisions for casting and forging assistance requests if tooling is unavailable to the contractor. The drawing and specification control revisions are detailed and dated, with the governing standard being MIL-DTL-52404C, and the product classified as Type XV, Class D. The contract explicitly prohibits government identification removal from non-accepted supplies and includes protections for covered defense information. Delivery is restricted to the specified origin point with zero variance allowed in quantity, and transportation logistics are governed by specific DLA procedural notes. The solicitation number is SPE8E6-26-T-3992, with a response deadline in August 2026 and a required delivery date set for April 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SEAL, TAMPER PROOF
Solicitation # SPE8E6-26-T-4062
The contract is for the procurement of tamper-proof seals under solicitation SPE8E6-26-T-4062, issued by DLA Dist San Joaquin under a Women-Owned Small Business Set-Aside, with a NAICS code of 333998. The item, identified by NSN 4210-01-446-1015 and part numbers 322-YELLOW and 6630000-Y, is to be supplied in a quantity of 252 MX with a firm fixed price and no variance allowed in quantity. Delivery is required within 69 days of award, FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, CA. All packaging must comply with DLA’s master technical and quality requirements, incorporating MIL-STD-129 labeling, and adhere to either Fed-Std-313 for hazardous materials under IP025 or ASTM D3951 for non-hazardous items, with DLA standards taking precedence. Packaging and palletization must meet RP001 requirements, and the unit of issue and quantity per unit pack must align precisely with the contract specifications. The delivery must be completed by February 12, 2027, with an original ship date of October 26, 2026, and transportation logistics are governed by DLA procurement notes C19 and C20. All technical and quality standards referenced are controlled by the DLA Master List effective on the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHICLE
Solicitation # SPE8EF-26-T-1575
This contract is for the procurement of 260 units of cargo vehicle tie-downs under the NSN 3990-01-619-7774 and part number 592736, issued by the Defense Logistics Agency through solicitation SPE8EF-26-T-1575. The requirement is set as a total small business set-aside, with delivery due 167 days after award, no later than February 1, 2027, and must be shipped FOB origin with zero variance in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and packaged according to MIL-STD-129, with palletization following DLA Packaging Requirements. The unit price is $260.00 per unit, totaling $67,600.00, and inspection and acceptance occur at the destination. The supplies are to be delivered to the DDSP New Cumberland Facility in Pennsylvania, with transportation governed by specific DLA procedural notes C19 and C20. Government identification must be removed from non-accepted supplies, and the contract incorporates provisions for covered defense information. The point of contact for inquiries is Russell Keiser, and the NAICS code is 333998.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE
Solicitation # SPE8E6-26-T-3991
The contract is for the procurement of two tube assemblies for a fire extinguishing system, identified by part number 65506-09014-042 and NSN 4210000895252, to be supplied by ROTAIR AIRCRAFT CORP to SIKORSKY AIRCRAFT CORP. The item must conform to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards such as ASTM D3951. All packaging and labeling must comply with MIL-STD-129 and DLA’s packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification and is subject to Covered Defense Information protocols. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and the delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, with a required delivery date of February 1, 2027, and a lead time of 167 days from the contract award. The unit of issue is each, with a total contract value based on the specified quantity. The contract is issued under solicitation SPE8E6-26-T-3991 with performance directed to DLA Distribution in San Diego, California, and procurement is restricted due to proprietary or insufficient data for competitive bidding.
SAN DIEGO

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, FIRE EXTINGUIS
Solicitation # SPE8E6-26-T-4002
The contract is for 54 fire extinguisher brackets with NSN 4210-01-147-6483, designated as a critical application item, specifically designed for use with the ANSUL Sentry Model 2013, 20-pound dry chemical extinguisher. The item manufacturer is TYCO FIRE PRODUCTS LP with part number 30937, and it must be painted red. All supplies must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation, including packaging method 10, dry climate control, and use of standard unit containers and intermediate containers. Packaging and marking must follow MIL-STD-129 with no special marking required. The contract prohibits the intentional addition of mercury or mercury-containing compounds in any hardware or supply, except for approved functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occur at destination, and the required delivery date is 76 days from the solicitation, with a need ship date of November 2, 2026, and original delivery date of November 4, 2026. The item is shipped to DLA Distribution at the New Cumberland facility in Pennsylvania, and transportation guidelines are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E6-26-T-4002, issued under a federal acquisition program with NAICS code 333998, and responses are due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIP, NOZZLE, FIRE HOS
Solicitation # SPE8E6-26-T-4004
The contract pertains to the procurement of a tip, nozzle, and fire hose assembly identified by NSN 4210010963447 and part number 20330001 from Akron Brass Company, with a total quantity of 35 units to be delivered within 64 days of contract award. The delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specified materials, methods, and markings, and palletization must adhere to DLA packaging requirements. All items must be free from intentional mercury or mercury-containing compounds, except for limited functional uses in approved devices such as batteries, fluorescent lights, or weapons systems, with mercury-containing portable items requiring dual containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements for compliance, and hazardous material shipping follows DLAD Proc Note C19, with delivery directed to the DDSP New Cumberland Facility in Pennsylvania. The original required delivery date is October 29, 2026, with a need ship date of October 21, 2026, under solicitation SPE8E6-26-T-4004, issued by the Department of Defense through the Defense Logistics Agency.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1580
This contract is for the procurement of cargo tie-downs for vehicles under solicitation SPE8EF-26-T-1580, issued by the Defense Logistics Agency. The item, identified by NSN 3990-01-518-6574 and part number 15MTC/1748, is to be delivered in a quantity of four AY units with a delivery window of 167 days from the contract award. Delivery is FOB origin, and inspection and acceptance occur at the destination location. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization as outlined in the DLA Master List of Technical and Quality Requirements referenced by R-numbers. Marking must follow MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA standards. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with narrow exceptions for functional uses in batteries, instruments, weapon systems, and specified reagents, and requires mercury-containing portable lamps and instruments to have shockproof design and secondary containment in compliance with NAVSEA 5100-003D. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of July 19, 2027, though a need ship date of February 1, 2027, has been specified. The contract includes strict quality controls, government-mandated compliance with technical specifications, and transportation rules outlined in DLAD procedural notes.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
HEAD, SPRINKLER, FIRE PR
Solicitation # SPE8E6-26-T-4060
The contract pertains to the procurement of 200 fire protection sprinkler heads under NSN 4210-01-231-7168, issued by DLA Dist San Joaquin under solicitation SPE8E6-26-T-4060, with a response deadline of August 17, 2026, and a delivery requirement of 127 days after order. The item is procured in full competition in accordance with military or federal specifications, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA web portal, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively, with unspecified attributes deemed major. The drawing for the item is available only during open solicitation via the DIBBS portal, and covered defense information potentially applies, requiring compliance with applicable security protocols. All supplies must be free of government identification if not accepted, and the place of performance is Tracy, CA, 95304-5000, with primary point of contact John Lieb reachable via email and phone for inquiries.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
POINTER ASSEMBLY
Solicitation # SPE7M2-26-Q-0721
The contract is for the procurement of 14 units of a POINTER ASSEMBLY with NSN 1720-00-867-0084 under solicitation SPE7M2-26-Q-0721, issued by the Department of Defense’s Nuclear Reactor Program through the Defense Logistics Agency. The requirement mandates that the vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization, ensuring adherence to stringent cybersecurity standards. Technical and quality specifications referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition’s scale. The technical data associated with this item is subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States, and restricts distribution strictly to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Delivery is required within 250 days after delivery order issuance, with responses due by August 13, 2026. The point of contact for inquiries is Kyle Barr, reachable via email and phone provided, with all documentation accessible through the DIBBS portal.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 332420
New
DIBBS
Small Business Subcontracting Participation
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 483110
New
DIBBS
Transportation of Supplies by Sea

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Fire Extinguisher Supply (NSN 4210-00-203-0217)
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE8E9-26-Q-0643
The contract awards 202 units of the Carrier Assembly, Protective Mask, identified by NSN 4240-01-224-4196, under solicitation SPE8E9-26-Q-0643, with a firm fixed price and no variance allowed in quantity. Delivery is required within 60 days after contract award, with freight shipped from origin and acceptance occurring at destination. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements, using specified methods for preservation, wrapping, and containment, while avoiding plastic materials whenever possible. Marking must adhere to MIL-STD-129 with no special coding required. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors, and any exempted items must meet NavSea 5100-003D standards for shock resistance and secondary containment. The item is destined for DLA Distribution at the New Cumberland facility, with transportation governed by DLAD procedural notes. The supply is critical to a Department of Defense requirement with a material need date of May 19, 2028, and technical and quality standards referenced from the DLA Master List of Requirements in effect on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
MARLINE
Solicitation # SPE8E9-26-T-3289
This contract under the MARLINE designation issued by the Navy through DLA mandates the supply of 230 coils of material, each weighing 20 pounds, identified by NSN 4020-00-240-2185 and purchase request 7017757212, meeting Type 4, Class 1 specifications. The material must be packaged in snug-fitting weather-resistant fiberboard boxes compliant with ASTM D5118, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except in specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The jute material replaces hemp in packaging, and the minimum breaking strength is reduced to 140 lbs instead of 175 lbs, with ASTM-D681 permissible for tar content determination. Source inspection is required if the vendor has not supplied this item within the past three years, and inspection and acceptance occur at the destination point. Delivery is scheduled to occur within 525 days from the contract award, with delivery terms set at FOB Origin and no variation allowed in quantity. The shipment must be sent to the designated receiving warehouse in Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all R and I-numbered specifications, with the applicable revision determined by the solicitation or award date depending on acquisition size. The material specification T-R-650 Revision A Gen 1 applies, with all packaging and handling instructions aligned to DLA’s procurement standards. The contract was solicited on August 5, 2026, with responses due by August 17, 2026, and performance is managed under NAICS code 314994 by the Department of Defense, with Matthew Kruc as the primary point of contact.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
All Other Miscellaneous Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3307
This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details