This Solicitation opportunity from Department Of Defense was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

COUPLING, CLAMP, GROO

Closed

SPE4A5-26-T-112RFederal

Submission Closed05/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332994

New

DIBBS

RESTRAINT KIT, HEADThe contract involves the procurement of 12 units of a Restraint Kit, Head, identified by the National Stock Number 6530-01-619-1777. The solicitation, numbered SPE2DH-26-T-4581, was issued by the Defense Logistics Agency under the Department of Defense and posted on June 15, 2026. Interested parties were required to respond by June 22, 2026. The purchase request for this contract is 7017171617. This is a federal-level solicitation without specified set-aside categories or NAICS codes, suggesting open competition. The contract's place of performance and point of contact details were not specified. The procurement is managed through the Defense Logistics Agency, indicating its role in supplying critical logistics support to defense operations.

Defense Logistics Agency

POSTED

DEADLINE

ADAPTER, GOVERNOR VAThe contract pertains to the procurement of a single unit of an Adapter, Governor VA, identified by NSN/Part Number 3040-01-195-6125. The solicitation number for this procurement is SPE7L3-26-T-068F, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline set for June 26, 2026. This is a federal government solicitation, though no specific set-aside designation, NAICS code, or location details for the office or performance site are specified. The contract request references purchase request number 7017155388 and involves the acquisition of one unit of the specified adapter. Additional details such as points of contact and precise locations for performance or office are not provided. The procurement is accessible through the Defense Logistics Agency's online portal, facilitating vendor responses within the stipulated timeframe. Overall, this contract outlines a straightforward acquisition for a specific defense-related equipment component under a federal solicitation process.

Defense Logistics Agency

POSTED

DEADLINE

STRAP, INVOLUNTARY, RThe contract pertains to the procurement of three units of an involuntary strap, identified by the National Stock Number 8465-01-470-6253. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, carries the reference number SPE1C1-26-T-1433 and was posted on June 15, 2026. Interested parties were required to respond by June 26, 2026. This is a federal solicitation, and while there is no specified set-aside or NAICS code provided, it is targeted towards federal organizational procurement. The contract involves the Defense Logistics Agency, which manages the acquisition process, although specific details such as the exact place of performance or contact points were not disclosed. The solicitation and related documents are accessible through the Defense Logistics Agency’s online portal for registered vendors. This contract is focused on a specialized military supply item, emphasizing procurement efficiency and compliance within the federal defense acquisition framework.

Defense Logistics Agency

POSTED

DEADLINE

Electro-Hydraulic Valve Assembly IntegrationThe contract involves the final assembly and integration of electro-hydraulic components, specifically solenoids, sensors, and hydraulic elements, into a fully functional modulator valve sub-assembly. This subcontract focuses on combining these technical parts to produce a key component essential for the operation of modulator valves. The work falls under the NAICS code 332994, indicating a specialized manufacturing process related to small arms or ordnance manufacturing, which aligns with precision assembly requirements. Issued by Dallas Area Rapid Transit in Texas, the solicitation was posted on June 15, 2026, with responses due by June 18, 2026. While certain details such as the place of performance, organization type, and point of contact are unspecified, the contract’s nature suggests a highly technical and precise assembly task contributing to advanced electro-hydraulic systems. Interested subcontractors can access more information through the provided online portal.

Dallas Area Rapid Transit

POSTED

DEADLINE

10--GUN SYSTEM HARNESSThis contract involves the procurement of 51 units of a gun system harness, identified by NSN 1005016974068, intended for delivery to the DLA Distribution location W1A8 within a specified timeframe of 129 days after award. The solicitation number for this request for quotes (RFQ) is SPE7L426T5107, posted by the DLA Land and Maritime, a Department of Defense office based in Columbus, Ohio. The acquisition is categorized under NAICS code 332994, indicating it relates to fabricated structural metal manufacturing. The approved source for this item is specified as 44114 EC0R-0155. Quotes must be submitted electronically by the deadline of June 26, 2026, and the solicitation documents are only available online, with no hard copies or detailed specifications, plans, or drawings provided. The solicitation is open to all responsible sources, which means any qualified vendor can submit a timely quote for consideration. Additional inquiries about the solicitation can be addressed via the primary contact email provided, and the solicitation can be accessed through the given link on the government contracting platform.

DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

The contract is for the procurement of 14 units of a coupling clamp with a grooved design, identified by NSN 5342-01-467-5596 and part number BACC10DU600ABE, to be delivered to the DLA Distribution Depot at Tinker Air Force Base, Oklahoma. The contract requires adherence to stringent technical and quality standards, including compliance with the DLA Master List of Technical and Quality Requirements and various quality assurance provisions such as configuration change management, packaging in accordance with ASTM D3951 and MIL-STD-129, and sampling methods following MIL-STD-1916 or ASQ standards. The contract specifies that the item production may involve metal casting or forging processes, for which tooling and assistance contacts are provided. Delivery is set for 171 days after the order, with the original required delivery date being May 9, 2028. Inspection and acceptance will occur at the destination, and packaging must meet detailed military specifications, including palletization as per DLA packaging guidelines. Critical manufacturing and quality requirements, including marking, traceability, and testing protocols, are referenced to ensure full compliance and performance reliability. The contract, issued by the Department of Defense through the ASC Supplier Operations OEM Division, assigns no unit of issue variance and designates Cheryl Broadie as the primary point of contact.

General Info

Procurement of 14 grooved coupling clamps, delivered to Tinker AFB, with military-grade quality standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories Manufacturing View NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-112R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 5

Solicitation

Response DeadlineMay 13

Deadline has passed

Submission Closed

05/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

Cheryl Broadie

contact@example.gov

+1 (555) 000-0000

Full Description

COUPLING,CLAMP,GROO
COUPLING, CLAMP, GROOVED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
SPE4A5-26-T-112R
SECTION B
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N BACC10DU600ABE
VOSS INDUSTRIES, LLC 14242 P/N BACC10DU600ABE
V I J CORP 94581 P/N BACC10DU600ABE
EATON AEROQUIP LLC 00624 P/N BACC10DU600ABE
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016644867 0001 EA 14.000
NSN/MATERIAL:5342014675596
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A5-26-T-112R
SECTION B
PR: 7016644867 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:11/01/2026 Original Required Delivery Date:05/09/2028
SPE4A5-26-T-112R NSN/Part Number: 5342-01-467-5596 Quantity: 14 EA Purchase Request: 7016644867QTY: 14 Delivery: 171 days ADO