This Solicitation opportunity from Department Of Defense was posted on August 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

COUPLING, CLAMP, GROOVED

Closed

SPE4A7-26-T-695BFederal

Submission Closed09/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L1-26-Q-1634

This solicitation is for the procurement of 94 units of a breech fitting for a bomb ejector rack, identified as NSN 1095-00-450-8483. The item is classified as a critical gun part with unique requirements and is subject to Government First Article Testing. The supplier must provide two exhibits: one fully assembled with finish and one machined but unassembled and unfinished. Delivery is required within 796 days after receipt of order. The item is designated as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and specific exception data applies to drawing 200415485. This federal acquisition is managed by the Department of Defense Land Supply Chain.

POSTED

DEADLINE

Supply of Reaction Cylinder Assemblies (NSN 2540016050547)

POSTED

DEADLINE

10--JURY STRUT ASSEMBLY

Solicitation # SPE7LX-26-U-002F

This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of five Jury Strut Assemblies under NSN 1055-01-127-8293. The contract is a total small business set-aside with a delivery requirement of 259 days after order. The agreement includes stringent technical and quality requirements, including CMMC Level 2 certification and adherence to DLA packaging and marking standards. Due to the nature of the items, the contract mandates compliance with demilitarization protocols for small arms parts and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # 46600-eRFQ-001981-2027

The Georgia Department of Public Safety, through the Georgia Public Safety Training Center, has issued solicitation 46600-eRFQ-001981-2027 to procure Staccato holsters. This Request for Quotes was posted on September 10, 2026, with a response deadline of September 16, 2026. The contract will run from the date of award through the end of the state's current fiscal year, which concludes on June 30, with the state maintaining four optional one-year renewal terms. Qualified suppliers must submit their responses via the GA@WORK Marketplace, including a completed cost worksheet, tax compliance forms, and a certificate of non-collusion. Evaluation criteria include cost, minimum experience, and a review of business litigation or debarment history over the last five years. Preference is given to businesses domiciled in Georgia. The procurement process also requires the submission of E-Verify forms and adherence to strict prohibitions regarding inmate contact. Kaylee Maynor serves as the primary point of contact for this solicitation.

Department of Public Safety

POSTED

DEADLINE

Manufacture of Mortar Plungers (NSN 1010017148005)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of Weapon System Component (NSN 1005-00-714-6365)

POSTED

DEADLINE

Supply of Gun Carriage Assemblies (NSN 1005-01-504-2915)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Component Manufacturing (Piston, Gun Gas Cylinder)

POSTED

DEADLINE

Supplier of Small Arms Cleaning Pull-Throughs (NSN 1005-01-478-2261)

POSTED

DEADLINE

Supply of 30mm Small Arms Bore Cleaning Brushes

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture and Supply of Resilient Weapon System Mounts (NSN 5342-00-143-0673)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation SPE4A7-26-T-695B is a Request for Quotations issued by DLA Aviation for the procurement of 10 grooved clamp couplings, identified by NSN 5342011320673. This is a Foreign Military Sales requirement for the Spanish Air Force, with a required delivery date of June 6, 2025. The items are source-controlled and must conform to Drawing 7M765, Revision L, with Hydraflow listed as an approved source. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and RP001 for palletization. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing.

General Info

Procurement of 10 grooved clamp couplings for Spanish Air Force, delivered within 5 days.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-695B Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 26

Solicitation

Response DeadlineSep 3

Deadline has passed

Submission Closed

09/03/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressUSA

Contacts

Erica Adams

contact@example.gov

Full Description

COUPLING,CLAMP,GROOVED
COUPLING,CLAMP,GROOVED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SOURCE CONTROL
MCDONNELL DOUGLAS CORPORATION
CAGE 76301 DRAWING 7M765, REV L, DTD 1 APR 2003
P/N 7M765-20D
APPROVED SOURCES:
HYDRAFLOW
CAGE 24984
IDENTIFY TO:
SOURCE CONTROLLED ITEM:
THE TECHNICAL/QUALITY/TEST REQUIREMENTS FOR
CITED P/N WILL BE IN CONFORMANCE WITH
THE LISTED DRAWING.
CRITICAL APPLICATION ITEM
HYDRAFLOW 24984 P/N 14J12-20A
SPE4A7-26-T-695B
SECTION B
TDP Rev B Gen 2 IAW BASIC DRAWING NR 76301 7M765 REVISION NR L DTD 04/01/2003 PART PIECE NUMBER: 7M765-20D
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 76301 6M148 REVISION NR H DTD 06/29/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 76301 PS17146 REVISION NR M DTD 08/02/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 76301 PS13143 REVISION NR R DTD 04/07/2005 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018061946 0001 EA 10.000
NSN/MATERIAL:5342011320673
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE4A7-26-T-695B
SECTION B
PR: 7018061946 PRLI: 0001 CONT’D
DSPT00
SPANISH AIR FORCE
MAESTRANZA AEREA DE MADRID
28071 CUATRO VIENTOS
MADRID SPAIN
ES
MARKFOR
DSPT00
SPANISH AIR FORCE
MAESTRANZA AEREA DE MADRID
28071 CUATRO VIENTOS
MADRID SPAIN
ES
M/F: (TCN) PSPT5V51490008
RDD: 193
PROJ: TP 1
SUPP ADD: DA2KQQ SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: F9B ADV: FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:06/06/2025
SPE4A7-26-T-695B NSN/Part Number: 5342-01-132-0673 Quantity: 10 EA Purchase Request: 7018061946QTY: 10 Delivery: 5 days ADO