Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

COUPLING HALF, QUICK DI

Active
SPE7M3-26-T-8989Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE7M3-26-T-8989, is issued by the Department of Defense Fluid Handling Division for the procurement of 67 units of a quick disconnect coupling half, identified by NSN 4730-01-448-2279. The item must be manufactured and tested according to drawing 12297003, revision J, and is designated as a source controlled item. Delivery is required within 68 days after order. The procurement falls under NAICS code 332996 and requires compliance with ISO 9001:2015 quality standards, DLA packaging requirements, and a prohibition on the use of class I ozone depleting chemicals. The contract includes stringent security and regulatory requirements, including CMMC Level 2 certification and adherence to ITAR or EAR export controls. Because the government cannot provide the technical data, only vendors with existing access to the data or traceability to approved sources are eligible to quote. Technical and quality requirements are governed by the DLA Master List, and inspection and acceptance will occur at the origin. The solicitation was posted on September 10, 2026, with a response deadline of September 21, 2026, and performance is centered in Texarkana, Texas.

General Info

DoD procurement of 67 quick disconnect couplings, delivery within 68 days, CMMC Level 2.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USA

Set-Aside

NONE

Documents

(1)

SPE7M3-26-T-8989 Request for Quotations

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA

Full Description

Show more
COUPLING HALF,QUICK DISCONNECT
COUPLING HALF, QUICK DISCONNECT.
DWG 12297003, REV J, CAGE 19207, DTD 06/19/1994
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
SPE7M3-26-T-8989
SECTION B
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4730-01-448-2279 Quantity: 67 EA Purchase Request: 7018273910QTY: 67 Delivery: 68 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
SLED
27-116 Various Pipe, Coupling & End Sections
Solicitation # 27-116
The City of Augusta, Georgia, is soliciting bids for solicitation 27-116 to establish an annual contract for the provision of various High-Density Polyethylene (HDPE) pipe, couplings, and end sections for the Engineering and Environmental Services Department. These materials are required for the installation and maintenance of water diversion down drains on side slopes and must comply with Georgia Rules for Solid Waste Management and Georgia Erosion and Sedimentation Control Rules. The scope includes a wide range of single-walled and double-walled type S HDPE pipes ranging from 8 to 36 inches, as well as 45-degree elbows, 90-degree bends, and tees. Items will be ordered on an as-needed basis, with delivery required within 60 days of purchase. The successful bidder must agree that no additional shipping, delivery, tariff, or restocking fees will be charged to the city. Bids are due by September 29, 2026, at 11:00 a.m., and must include one original and one electronic version on USB. The award will be granted to the lowest responsive bid that meets all technical specifications, provided the bidder does not require a minimum order amount. A local bidder preference applies to projects of 100,000 dollars or less if the local bidder is within 10 percent or 10,000 dollars of the lowest non-local bidder. Required documentation includes business licenses, W-9s, E-Verify affidavits, and a non-collusion affidavit. Contract terms include a price escalation limit of three percent per item, requested 60 days prior to renewal, and a 30-day written notice requirement for termination. Bidders must also maintain liability and workman's compensation insurance and adhere to strict non-discrimination policies.
City of Augusta

POSTED

1 day ago

DEADLINE

in 18 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS