Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

COUPLING HALF, QUICK

Open
SPE7M3-26-T-4426Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M3-26-T-4426, issued by the DLA Land and Maritime Fluid Handling Division, is a small business set-aside for the procurement of one unit of a Quick Coupling Half, identified by NSN 4730-01-459-5745. The contract requires delivery within 20 days after order, with a required delivery date of March 26, 2026, and is established as FOB Origin. Performance is located at Wright Patterson AFB. The procurement is governed by NAICS code 332996 and requires the use of the Wide Area Workflow system for electronic invoicing and payment. The contract mandates strict adherence to technical and quality requirements, including destination inspection per FAR 52.246-2 and authorized certificate of conformance procedures per FAR 52.246-15. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for Type I shelf-life items. The item must have a non-extendable shelf life of 180 months, with at least 85 percent remaining upon receipt. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and DFARS restrictions on covered defense telecommunications equipment.

General Info

Small business contract for one Quick Coupling Half delivered to Wright Patterson AFB.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

5236 CHASE ST BLDG 257, WRIGHT PATTERSON AFB, OH, 45433-5501, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Office AddressUSA
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COUPLING HALF,QUICK
COUPLING HALF, QUICK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Shelf-life Additional Requirements
- PRODUCTS DELIVERED UNDER THIS CONTRACT SHALL BE IAW DODM 4140.27, VOLUME 1, TABLE 1. A MINIMUM OF 85% SHELF-LIFE REMAINING AT TIME OF RECEIPT, ON NEW PROCUREMENT, BY THE FIRST GOVERNMENT ACTIVITIY.
- SHELF-LIFE MARKINGS SHALL BE IAW THE LATEST REVISION OF MIL-STD-129.
- RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
ADEQUATE DATA FOR THE NSN/Part Number: 4730-01-459-5745 Quantity: 1 EA Purchase Request: 7016113271QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Pipe Nipple Supply (NSN 4730001962037)
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Nut Assembly, Tube C ManufacturingThis subcontract involves the fabrication of 3,000 units of Nut Assembly, Tube C for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The production process requires the use of precision metal fabrication and machining equipment to meet specific technical requirements. The contractor must ensure full compliance with the Buy American Act and maintain a CMMC Level 2 Self-Assessment for the handling of Covered Defense Information. This effort falls under NAICS code 332996 and is managed under the Department of Defense.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLIC
Solicitation # SPE7M4-27-T-2917
Solicitation SPE7M4-27-T-2917 is a small business set-aside procurement issued by the DLA Weapons Support Fluid Handling Division for 87 feet of metallic pipe. The required material is black iron, carbon steel, seamless pipe with a 1.250 inch NPS and 0.191 inch wall thickness, featuring plain ends and random lengths between 12 and 22 feet. The items must adhere to ASTM A53/A53M Revision M and include continuous marking every three feet detailing the producer, specification, composition, size, contract number, national stock number, seamless designation, and heat or lot number. Delivery is required by May 10, 2027, with the destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. The contract incorporates various FAR and DFARS clauses, including prohibitions on Class I ozone depleting chemicals and requirements for safeguarding covered defense information. Metal Certification CDRLs via DD Form 1423 are required, and all payment processing must be handled through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M4-27-T-2705
This procurement, managed by the DLA Weapons Support Fluid Handling Division, is for the supply of 147 tube elbows, part number MS21926W6, under NSN 4730-01-467-5903. Designated as a critical application item, the product must be manufactured or assembled by an accredited entity listed on the PRI Qualified Manufacturer List (QML) or Qualified Products List (QPL) in accordance with FAR 52.209-1. Technical compliance is governed by TDP Rev C Gen 3 and standards SAE AS21926D (Revision D) and SAE AS18280H (Revision H). Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited. The contract is a small business set-aside with delivery terms set as FOB Origin under the First Destination Transportation program, with the final destination being DLA Distribution San Diego. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. The need ship date is May 4, 2027, with a required delivery date of November 26, 2027. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with DFARS regulations regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, SWIVEL FLANGE TO
Solicitation # SPE7M3-27-T-1103
This procurement, issued by the DLA Weapons Support Fluid Handling Division under solicitation SPE7M3-27-T-1103, is for the supply of a swivel flange to hose elbow, designated as a critical application item. The required hardware is part number 2251-4-4S from Danfoss Power Solutions II, LLC, identified by NSN 4730014957818. The contract consists of two line items totaling 60 units, with 16 units destined for DLA Distribution San Joaquin in Tracy, California, and 44 units for DLA Distribution Albany in Georgia. Delivery is required within 70 days, with an original required delivery date of May 17, 2027, and shipping terms are FOB Origin. The contract is a small business set-aside and requires strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Inspection and acceptance will occur at the destination. Administrative requirements include the use of Wide Area WorkFlow for electronic invoicing and payment. The solicitation incorporates several federal regulations, including the Buy American and Balance of Payments Program, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Additionally, parts produced via additive manufacturing are ineligible for award unless specifically authorized.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
NIPPLE, HOSE
Solicitation # SPE7M0-27-T-1079
Solicitation SPE7M0-27-T-1079, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is for the procurement of two hose nipples under NSN 4730-01-481-0352. The contract requires delivery within five days of award, with an original required delivery date of November 5, 2026. Delivery is specified as FOB Destination Other, with the consignee being the DLA Distribution Management Office in Yermo, California. Inspection and acceptance are required at the destination per FAR 52.246-2. The contractor must adhere to strict environmental and quality standards, including a total prohibition on Class I ozone-depleting chemicals and the requirement to submit substitute chemicals for approval. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. The contract incorporates various FAR and DFARS clauses covering combating trafficking in persons, cybersecurity reporting, and the Buy American Act. Payment and invoicing must be processed electronically through the Wide Area Workflow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
THREAD PIECE, UNION
Solicitation # SPE7M2-27-T-0371
Solicitation SPE7M2-27-T-0371 is a fixed-price request for the procurement of two steel, straight face type union thread pieces (NSN 4730-00-804-4432) for the DLA Weapons Support Nuclear Reactor Program. The items must be manufactured in accordance with Naval Air Engineering Laboratory part number A316873-4, featuring a 3/4 inch nominal pipe size and a 4000 PSI water working pressure. Delivery is required within 146 days after receipt of order, with shipping based on FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract imposes strict regulatory and security requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls, requiring offerors to have an approved US/Canada Joint Certification Program certification. Packaging must adhere to RP001 DLA standards, and bare items must be marked with the contract number, NAWC CAGE, and part number. While not a small business set-aside, a price evaluation preference is available for certified HUBZone small business concerns. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
BOLT, FLUID PASSAGE
Solicitation # SPE7M3-27-T-1178
This solicitation, issued by the DLA Weapons Support Fluid Handling Division under solicitation number SPE7M3-27-T-1178, is a request for quotations for one fluid passage bolt, also known as a banjo bolt, with NSN 4730011510129. The requirement is for a single unit to be delivered FOB Origin within 20 days. The item is subject to a source controlled drawing, specifically referencing Deutz Corporation P/N 1119237, and must meet all cited drawing requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone depleting chemicals is strictly prohibited. Inspection and acceptance will occur at the destination, requiring zero non-conformances in the sample lot per MIL-STD-105/ASQ Z1.4. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA packaging requirements taking precedence. The contract incorporates several key FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted via the DIBBS portal, and payment will be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-27-T-1085
Solicitation SPE7M3-27-T-1085 is a Request for Quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of one sediment strainer, identified by NSN 4730-01-486-7049. This is a critical application item that may require specific casting or forging and associated tooling. The contract is managed under the First Destination Transportation program with delivery set for FOB Destination Other to DLA Distribution San Diego. The required delivery date is May 23, 2027, with a lead time of 168 days after date of order. The procurement is subject to strict technical and quality requirements, including DLA packaging requirements RP001 and marking standards MIL-STD-129. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specified functional uses. Compliance with the Buy American and Balance of Payments Program is required for quotes exceeding the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and the DLA Internet Bid Board System for quote submissions. Inspection and acceptance will be conducted at the destination per FAR 52.246-1.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
EXPANSION JOINT, PIPE
Solicitation # SPE7M3-27-Q-0016
Solicitation SPE7M3-27-Q-0016 is a small business set-aside procurement issued by the DLA Weapons Support Fluid Handling Division for one pipe expansion joint, NSN 4730-01-425-0504. This item is specifically identified for the Combat Capabilities Development Command Chemical Biological Center, and all requests for variance must be approved by the CCDC-CBC, Army ESA, SICA BG. The delivery requirement is 300 days after award, FOB Destination, with the final shipping destination located at Fort Irwin, California. The contract mandates strict adherence to technical and quality standards, including higher-level contract quality requirements and the prohibition of Class I ozone-depleting chemicals. Cybersecurity compliance is critical, requiring CMMC Level 2 certification via a Certified Third-Party Assessment Organization. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification. Inspection and acceptance are performed at the source, with the government conducting the final inspection and Product Verification Testing at a designated laboratory. Contractors must provide PVT samples including material certifications and drawings, and must ensure all packaging and marking comply with MIL-STD-129 and Special Packaging Instruction P31154375. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, SWIVEL FLANGE TO
Solicitation # SPE7M3-27-T-1058
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-27-T-1077
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332999
New
DIBBS
Supplier of Quick Coupling Half (NSN 4730-01-459-5745)This subcontract involves the manufacture or procurement of a Quick Coupling Half, identified by NSN 4730-01-459-5745, for the Department of Defense Fluid Handling Division. The supplier must ensure that all items strictly adhere to the Buy American Act and Berry Amendment requirements. Key technical specifications include a guaranteed shelf life of 180 months and the provision of a Certificate of Conformance in accordance with FAR 52.246-15. Logistical requirements mandate that items be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The contract specifies the delivery of one unit FOB Origin to Wright Patterson AFB. This opportunity falls under NAICS code 332999 and is managed by the DLA Land and Maritime Fluid Handling Division.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326220
New
DIBBS
Nonmetallic Hose Assembly ManufacturingThis subcontract involves the manufacture and supply of 40 nonmetallic hose assemblies for prime contractors supporting the Department of Defense Fluid Handling Division. The contractor is responsible for producing or sourcing assemblies according to NSN 4720-01-648-3691, ensuring all openings are sealed with plugs or end caps and that units are coiled properly to prevent kinking. All deliverables must adhere to strict packaging standards, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. The work is categorized under NAICS code 326220 and is to be performed in New Cumberland, Pennsylvania. The response deadline for this requirement is November 10, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-360Z
This fixed-price solicitation, issued by the DLA Land and Maritime Fluid Handling Division, is for the procurement of 40 units of Nonmetallic Hose Assemblies (NSN 4720-01-648-3691). The contract is designated as a Small Business Set-Aside under NAICS code 326220. Delivery is required within 168 days after award, with a need ship date of February 16, 2027, and an original required delivery date of April 7, 2027. The terms are FOB Origin, with both inspection and acceptance occurring at the destination. Technical requirements mandate that all hose openings be sealed with plugs or end caps to prevent debris contamination. Hoses must be individually coiled to reduce volume without impairing functional properties and secured to prevent kinking or damage. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. The contractor is required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity reporting, and hazardous material labeling.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M4-26-T-389H
Solicitation SPE7M4-26-T-389H is a federal procurement issued by the Defense Logistics Agency Fluid Handling Division for the supply of 34 units of tube coupling nuts, identified by NSN 4730012107820. This is designated as a critical application item and must adhere to source control drawings from Hamilton Sundstrand Corporation (P/N 757578-5) or Eaton Aeroquip LLC (P/N T15-200A). The requirement is categorized under NAICS code 332996. Delivery is specified as FOB Origin with a need ship date of March 9, 2027, and an original required delivery date of July 1, 2027. The items are to be delivered to DLA Distribution Cherry Point in North Carolina, where both inspection and acceptance will take place. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 for marking and labeling, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. Payment and receiving reports must be processed electronically via Wide Area Workflow. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Offerors are required to submit quotes through the DIBBS portal and must comply with all specified representations and certifications, including those related to small business status and domestic origin of supplies.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7M4-26-T-442B
Solicitation SPE7M4-26-T-442B is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 38 helical compression springs, identified by NSN 5360-01-515-6710 and Eaton Corp Part Number 215373. The requirement specifies adherence to TDP Rev A Gen 1 and NAICS code 332613. Delivery is required within 168 days after order, with a need ship date of March 23, 2027, and an original required delivery date of December 9, 2027. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona, with both inspection and acceptance occurring at the destination per FAR 52.246-1. The contract mandates strict packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Offerors must comply with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and safeguarding regulations, including DFARS 252.204-7012. Invoicing and payment shall be processed electronically through the Wide Area WorkFlow system. Quotations were required to be submitted via the DIBBS portal by October 5, 2026.
Spring Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-27-T-0118
Solicitation SPE7M4-27-T-0118 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 34 helical compression springs. The required items are identified by NSN 5360015156710 and Eaton Corp part number 215373, conforming to TDP Rev A Gen 1. Delivery is required within 210 days after order, with a need ship date of September 8, 2026, and an original required delivery date of May 27, 2027. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona, with inspection and acceptance occurring at the destination per FAR 52.246-1. The procurement is subject to strict technical and quality standards, specifically RA001 and the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. All packaging must comply with MIL-STD-129 and RP001 for palletization. Notably, the government will not evaluate or award contracts for items produced using additive manufacturing. Offerors must submit quotes via the DIBBS system and comply with various federal regulations, including the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity requirements, and electronic invoicing via Wide Area WorkFlow.
Spring Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS