Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

COUPLING HALF, QUICK

Awarded
SPE7M0-26-T-011CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded a simplified acquisition contract to OLB ASSOCIATES LLC for the procurement of six units of a CRITICAL APPLICATION ITEM designated as COUPLING HALF, QUICK, with NSN 4730012112015 and part number CATERPILLAR INC 11083 P/N 7K0614. The contract, issued under solicitation SPE7M0-26-T-011C, has a total value of $209.94 and was awarded on July 22, 2026. The item must be delivered within 85 days after receipt of order, with FOB Origin terms and delivery directed to DLA Distribution Red River Receiving in Texarkana, Texas. Packaging, marking, and palletization must adhere strictly to ASTM D3951 and MIL-STD-129, with any conflicting requirements superseded by the DLA Master List of Technical and Quality Requirements and RP001 packaging standards. Destination inspection is mandatory under FAR 52.246-1, with acceptance handled by DLA personnel at the specified delivery location. The contract incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, which subjects the award to numerous FAR and DFARS clauses, including provisions on cybersecurity, whistleblower protections, electronic payment via WAWF, and prohibitions on covered telecommunications equipment and hexavalent chromium. The contractor must validate representations in SAM, comply with hazardous materials labeling requirements under 29 CFR 1910.1200, and submit pre-award hazard labels for any non-exempt materials. Payment is to be processed electronically with cost vouchers or invoices and receiving reports submitted via WAWF as specified. The award is restricted to the specified item without option quantities, and the contracting office is located in Columbus, Ohio, with James Losey identified as the primary point of contact.

General Info

Six Coupling Half Quick Disconnects, part 7K0614, to be delivered in 85 days to DLA Red River under strict military packaging and quality standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$209.94

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

OLB ASSOCIATES LLCView Profile

Award Issued Date

Documents

(2)

Request for Quotations SPE7M0-26-T-011C

PDFrfq

SPE7M026V4816.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
DLA award SPE7M026V4816 posted on DIBBS. Awardee: OLB ASSOCIATES LLC (CAGE 7MFD4) Total Contract Price: $209.94 Award Date: 07-22-2026 Solicitation: SPE7M0-26-T-011C Line items: - COUPLING HALF, QUICK (NSN/Part 4730012112015, PR 7017526880)

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
Federal
VALVE,MANIFOLD ASSY
Solicitation # N0010426QND60
This contract pertains to the procurement of a Valve, Manifold Assembly designated as Special Emphasis Material (Level I) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel. The material must strictly conform to VACCO Drawing V3D10334 and applicable specifications including ASTM-B21, ASTM-B283, ASTM-B16, ASTM-B36, and ASTM-B121, with specific alloy and temper requirements for the sensing piston. Comprehensive quality assurance measures are mandated, including full traceability from raw material to finished component through unique heat-lot or traceability markings, 100% inspection of certification data, and mandatory submission of chemical and mechanical test reports. All welding, brazing, and repair operations must comply with S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with procedures and qualification data requiring prior Navy approval; electronic signatures are accepted on certifications provided they are securely controlled and uniquely tied to authorized individuals. The contractor must maintain an ISO-9001 quality system aligned with ISO-10012 and ISO/IEC 17025 calibration standards and is subject to Government Source Inspection at the point of manufacture. All materials must be mercury-free, and any deviation or waiver from specifications requires formal approval by the Contracting Officer prior to implementation, with critical departures involving safety, performance, or structural integrity held to the highest scrutiny. Delivery and acceptance are governed by stringent procedural controls: all certification documentation must be submitted via Wide Area WorkFlow (WAWF) to Portsmouth Naval Shipyard with designated Ship to, Inspect by, and Accept by codes, and no material may be shipped without prior written acceptance. The contractor is required to flow down all quality, traceability, and certification requirements to sub-tier suppliers and must ensure subcontracted operations preserve traceability and compliance. Packaging must adhere to MIL-STD-2073, and configuration control is tightly managed under Engineering Change Proposal (ECP) protocols for any modifications affecting form, fit, function, or interface. The contract invokes Emergency Acquisition Flexibilities and is designated as a DPAS-rated order for national defense priority. Final acceptance hinges on zero-defect lot acceptance per ANSI/ASQ-Z1.4, with 100% verification of traceability, certifications, and compliance for every
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QND04
This contract pertains to the supply of a specialized stem and disk assembly for a 1 1/2 inch globe throttle valve, designated as special emphasis Level I material due to its critical role in shipboard systems where failure could result in catastrophic consequences including loss of life or the vessel. The item must strictly conform to NAVSHIPS drawing 803-2177525, with the stem composed of ASTM-A182 Grade F6a or SAE AMS-QQ-S-763 Class 410 Condition T material, and must satisfy rigorous mechanical and chemical certification requirements. All materials must be traceable from raw stock through every manufacturing stage to the final component, with unique heat-lot or traceability markings permanently applied and verified against test reports. Certification documentation must confirm compliance with specified standards including ASTM-E18, ASTM-E140, MIL-STD-2035, and ISO-9001, and must be submitted in electronic format via WAWF with explicit identification to the contract number, NSN, and government receipt points. The contract mandates a stringent quality assurance regimen requiring the contractor to maintain an ISO-9001 based quality system, with calibration procedures aligned to ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025, subject to government audit at source. All welding, brazing, and machining operations must adhere to specified Navy procedures including S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with welding procedures and qualification data requiring prior Navy approval. Non-destructive testing, including dye penetrant inspection and visual inspection of hardfaced surfaces, is required, and chemical and mechanical properties must be verified per heat treat batch with 100% inspection of all certification data. Final acceptance is contingent upon zero-defect lot sampling, with all traceability markings legible and intact. Electronic signatures are permitted on certifications, provided they are individually controlled and unalterable. Delivery is subject to government inspection prior to shipment, with no material allowed to proceed without WAWF certification acceptance from Portsmouth Naval Shipyard. The contract is issued under Emergency Acquisition Flexibilities, requires bilateral acceptance, and mandates full compliance with security and small business set-aside provisions.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
Federal
VALVE,REGULATING,FL
Solicitation # SPRMM126QKE53
This contract governs the manufacture and delivery of a VALVE, REGULATING, FL under a Fixed-Price arrangement with stringent quality and compliance requirements. The contractor must adhere to multiple military and international standards including MIL-STD-130 for marking, MIL-STD-973 for configuration control, IPC J-STD-001 Class 3 for soldering, and ISO 9001 for quality management systems. First Article Testing is mandatory, with both contractor and government verification required: the contractor must conduct non-destructive testing on a single unit and submit a formal report via DD Form 1423, followed by government compatibility testing at NSWC-PHD, MK41 VLS Group to validate form, fit, and function. Production Lot Testing is also required, and 100% inspection is mandated. The item must be mercury-free with no contamination, and any intentional use of mercury demands prior written approval and a warning plate. Configuration changes, substitutions, or production facility shifts require formal approval from the Contracting Officer and a $250 administrative cost reduction. The contract is governed by the Lowest Price Technically Acceptable (LPTA) evaluation method, emphasizing technical compliance over cost competitiveness. All contracts are considered issued upon electronic delivery, and submissions must comply with electronic invoicing via WAWF. The contractor must provide proof of being an authorized distributor if not the manufacturer, including OEM CAGE code and part number. Records of all inspections must be retained for 365 days post-delivery, and compliance with data distribution restrictions (including NOFORN and other DOD distribution codes) is mandatory. The contractor is required to register for EDA to access orders and notifications and must supply contact information for Navy NAVSUP WSS Mechanicsburg to receive automated updates. Delivery is subject to Navy procedures superseding any conflicting industry standards. Small business representation is applicable, and the solicitation number is SPRMM126QKE53 with a response deadline of September 8, 2026.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 332919
New
Federal
VALVE,SOLENOID
Solicitation # SPRMM126QKB68
This solicitation, issued under SPRMM126QKB68 by the Defense Logistics Agency (DLA) Mechanicsburg, seeks bids for the VALVE, SOLENOID under a Lowest Price Technically Acceptable (LPTA) evaluation process, with the response deadline extended to August 10, 2026. The contract incorporates numerous mandatory clauses, including inspection and acceptance standards, annual representations and certifications, and requirements for electronic submission of invoices and receiving reports via PIEE-WAWF. The item must conform to specified military standards, notably MIL-STD-130 Rev N for marking, and must be mercury-free with no contamination, as it is intended for use on submarines or surface ships; any use of mercury requires explicit prior written approval. Contractors must provide detailed quantity-based pricing breaks and identify the Original Equipment Manufacturer (OEM) including CAGE code and part number if not the manufacturer. Production facility changes are strictly controlled and require approval plus a $250 administrative fee. Electronic submission via EDI is accepted but exceptions must be clearly noted or submitted in hard copy; failure to do so may result in award based solely on solicitation terms. All contractual documents are deemed issued upon electronic transmission, and contractors are required to register for the PIEE EDA portal to monitor contract modifications and receive automated notifications through NAVSUP WSS. Inspection will occur at the source per DLA Procurement Note E06, and records of all inspections must be retained for 365 days post-delivery. Only authorized distributors of the OEM’s item are eligible for award, requiring formal proof of authorization. Compliance with all applicable standards, including packaging per MIL-STD-2073, and adherence to distribution restrictions outlined in OPNAVINST 5510.1, are binding conditions of the contract.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 332919
New
Federal
PARTS KIT,STOP-CHEC
Solicitation # N0010426QND40
This contract specifies the procurement of a Bonnet and Stem Assembly for a 1-inch stop check valve, designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly conform to NAVSEA drawing 2177934 and associated specifications, with material requirements tightly controlled: the bonnet ring must be forged or cold-drawn QQ-N-281 or ASTM-B564/ASTM-B164 UNS N04400, the stem and disc holder must meet QQ-N-281 Class A or B or ASTM-B164 UNS N04400, and the bonnet must be forged MIL-C-24679 or rod MIL-C-15726 Alloy C71500. All components require traceable certification of chemical and mechanical properties, with welds and pressure tests subject to strict acceptance criteria defined in the drawing and referenced standards. Each part kit must undergo shell and backseat pressure tests with precise tolerances based on test pressure levels, and all threads must be cut, not cold-formed, and inspected per FED-STD-H28 with System 21 as the baseline. O-ring grooves and sealing surfaces must comply with the General Acceptance Criteria unless otherwise specified. Mercury and mercury-containing compounds are strictly prohibited. The contractor must maintain a certified quality system compliant with ISO-9001, calibrated under ISO-10012 or ANSI-Z540.3 with ISO/IEC 17025, or as an alternative MIL-I-45208 with MIL-STD-45662. Quality assurance includes full government inspection at source, with DCMA involvement required for welding procedure approvals, nondestructive testing oversight, and traceability verification. All material must be traceable from raw stock to finished component via unique heat-lot markings, maintained through all processes including subcontracting, and documented on certification reports verified for completeness and legibility. Electronic signatures are accepted and must be uniquely controlled and auditable. Final certification requires a signed Certificate of Compliance linking each part to its test data and contract, submitted via WAWF with specific shipment and notification instructions to Portsmouth Naval Shipyard. No material may be shipped until acceptance is confirmed. The contract is subject to Emergency Acquisition Flexibilities, requires bilateral acceptance, and is designated a rated order under the Defense
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
GLAND,VALVE
Solicitation # N0010426QND48
This contract pertains to the procurement of a gland for a 1/2 inch check valve, designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or the vessel. The supplier must comply with stringent quality and traceability requirements, including full material certification under QQ-N-281 with quantitative chemical and mechanical analysis, adherence to welding and brazing standards S9074-AQ-GIB-010/248 and 0900-LP-001-7000, and mandatory traceability of all components via unique heat-lot markings that must be permanently affixed and verifiable throughout manufacturing and subcontracting operations. All certifications must be electronically signed, positively worded without disclaimers, and submitted via WAWF with Ship to N50286, Inspect by and Accept by N39040, and notification to PORT_PTNH_WAWF_Notification@navy.mil; no shipment may occur prior to formal acceptance. The supplier must maintain an ISO-9001-compliant quality system with calibration standards per ISO-10012 or ANSI-Z540.3, and subject to government quality assurance inspections at source, including unannounced audits and documentation reviews. The contract mandates 100% inspection of all traceability markings, certification documents, non-destructive testing, and material conformity, with zero-defect acceptance criteria enforced through sampling plans per ANSI/ASQ Z1.4. Any deviation, waiver, or engineering change requires prior written approval from the Contracting Officer and must be classified as Critical, Major, or Minor, with full submission via electronic channels including ECDS. Subcontractor oversight is fully the prime contractor’s responsibility, requiring flow-down of all quality, certification, and traceability requirements. The product must be mercury-free, marked only as permitted, and packaged in compliance with MIL-STD-2073. Delivery is FOB destination under a total small business set-aside, with a one-year warranty from delivery date, and the contract is issued under Emergency Acquisition Flexibilities and rated under the Defense Priorities and Allocations System. All documentation, including test reports and weld qualifications, must be in electronic format, and the offeror must be the OEM or provide authorized distributor certification. The award requires bilateral acceptance and is part of a larger program governed by naval systems integrity, safety
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,GLOBE
Solicitation # N0010426QND64
This contract is for the procurement of a globe valve assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), intended for use in a critical shipboard system where failure could lead to catastrophic consequences including loss of life or vessel. The valve must conform strictly to Vacco drawing V3D10324-03 and adhere to a comprehensive set of material, testing, and documentation requirements. Material specifications include SAE AMS 5643 and SAE AMS-QQ-S-763 for critical components, with mandatory certification of chemical composition, mechanical properties, and non-destructive testing such as liquid penetrant inspection, intergranular corrosion testing, and production testing per the assembly drawing. All materials must be traceable from raw stock through final assembly via unique heat-lot markings, with certifications required for every component including welds, fasteners, and sealants. Electronic certification documentation must comply with stringent standards, including the use of verified electronic signatures and submission via WAWF to Portsmouth Naval Shipyard prior to shipment. The contractor must maintain a certified quality system conforming to ISO-9001 with ISO-10012 and ISO/IEC 17025, or MIL-I-45208 with MIL-STD-45662, subject to government inspection at source. All welding and brazing procedures require prior approval with submission of qualification records in electronic format, and any repairs to critical components necessitate Contracting Officer authorization. Traceability and certification documentation must be rigorously controlled, with 100% verification of test reports, material markings, and compliance against invoked standards such as FED-STD-H28, ASTM-F606, and MIL-DTL-1222. Fasteners must be marked per MIL-DTL-1222 with material symbols, manufacturer ID, traceability codes, and six-dot self-locking indicators. The contract mandates zero-defect acceptance sampling, prohibits mercury usage, requires strict configuration control via Engineering Change Proposals, and enforces flow-down of all requirements to subcontractors. Delivery is FOB destination, payment is processed through WAWF with specific routing to N50286 and inspection/acceptance by N39040, and no materials may be shipped without prior documentation approval. The solicitation is issued under Emergency Acquisition Flexibilities and is DO certified under DPAS, with final award conditional upon bilateral acceptance.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency