Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COUPLING, SHAFT, RIGI

Active
SPE7L2-26-T-0541Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two rigid shaft couplings, identified by NSN 3010-01-201-2488 and part number V0-089-131-01 from Vericor Power Systems LLC, with a total value of $2.00 per unit. The item must be delivered within 168 days to the designated receiving warehouse in Tracy, California, under FOB origin terms with no quantity variance allowed. All packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, cushioning, and containerization, and all marking must adhere to MIL-STD-129 without special markings. The contract strictly prohibits the intentional use or direct contact of mercury or mercury-containing compounds, except for specified functional applications such as batteries, fluorescent lights, instruments, sensors, weapon systems, and chemical reagents approved by NAVSEA, with portable devices requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely banned, and any substitute chemicals must be submitted for approval unless explicitly authorized. Delivery is required by January 5, 2027, with an original required delivery date of December 27, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract is issued under solicitation SPE7L2-26-T-0541, with shipment logistics governed by DLAD procedural notes C19 and C20.

General Info

Procurement of two RIGI shaft couplings NSN 3010-01-201-2488 under DLA solicitation SPE7L2-26-T-0541, response due July 20, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLESView Agency

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7L2-26-T-0541.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
View Agency Profile
Office AddressUS
Contacts
Shaun Sehgal
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COUPLING,SHAFT,RIGI
COUPLING,SHAFT,RIGID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
VERICOR POWER SYSTEMS LLC 1N8S8 P/N V0-089-131-01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017436940 0001 EA 2.000
SPE7L2-26-T-0541
SECTION B
PR: 7017436940 PRLI: 0001 CONT’D
NSN/MATERIAL:3010012012488
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/05/2027 Original Required Delivery Date:12/27/2026
SPE7L2-26-T-0541 NSN/Part Number: 3010-01-201-2488 Quantity: 2 EA Purchase Request: 7017436940QTY: 2 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333612
New
DIBBS
Manufacturing of Nonvehicular Universal Joints (RA001)The contract calls for the full-scale manufacturing of four units of a Nonvehicular Universal Joint identified by NSN 3010-01-400-6047, engineered to meet all technical specifications and configuration controls established by the Defense Logistics Agency. Production must adhere strictly to DLA’s quality, testing, and documentation standards, with delivery required to the specified performance location in Tracy, California, ZIP 95304-5000. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, ensuring eligibility is restricted to small businesses as defined by the Small Business Administration. The NAICS code 333612 classifies this procurement under Other Engine Equipment Manufacturing, indicating the specialized nature of the components being produced. All proposals must be submitted by the response deadline of July 30, 2026, following the federal procurement framework, with the contract issued by the Department of Defense through its Land Supply Chain division.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
Supply of HUB (NSN 3930-01-123-2526)One unit of a HUB identified by NSN 3930-01-123-2526 and part number 679739 is to be procured and delivered in full compliance with all packaging, labeling, and invoicing specifications. Delivery must be completed within five days of contract award, with terms set at FOB origin. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under a subcontract type with NAICS code 333612. The contract is managed by the Department of Defense under the agency name Construction & Equipment Manu & Con, and performance is required at a location in McAlester, Oklahoma, with a zip code of 74501-5000.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
Manufacture of Electrical Solenoids (NSN 5945-00-407-7030)The contract entails the full lifecycle production of electrical solenoids designated by NSN 5945-00-407-7030, requiring compliance with military specifications throughout all phases including design, assembly, testing, packaging, and delivery. The work must meet stringent defense standards to ensure operational reliability and performance in mission-critical applications. This is a subcontract opportunity set aside exclusively for Women-Owned Small Businesses under the WOSB program, with the NAICS code 333612 identifying the industry classification for other engine equipment manufacturing. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, managed by the Maritime Supply Chain division within the Department of Defense. The place of performance and point of contact details are unspecified in the available data, but all work must be executed in accordance with federal defense procurement requirements and delivered to meet military logistical timelines.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
TORQUE LIMITER ASSEThe contract specifies the procurement of five mechanical torque limiter assemblies, modified to conform to Naval Sea Systems Command Drawing Number 6558132, based on Morse Industrial Corporation’s Model 500A-1C. Delivery is required within five days of award, with the solicitation number SPE7L3-26-T-114A and NSN 3010-01-340-6088. Compliance with stringent technical and quality standards is mandated through incorporation of DLA’s Master List of Technical and Quality Requirements, with specific references to RQ and RD codes governing configuration management, inspection at origin, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The item contains technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location and mandating compliance with DFARS 252.225-7048. Access to this data is limited to DLA contractors with approved JCP certification, completed training on handling export-controlled data, and formal DLA authorization. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by specification. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The contractor must be CMMC Level 2 certified and comply with all applicable cybersecurity and data protection protocols.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333612
New
DIBBS
UNIVERSAL JOINT, NONVEHThe contract is for the procurement of four universal joints, nonvehicular, identified by NSN 3010-01-400-6047, under solicitation SPE7L1-26-Q-1335, with a total small business set-aside and a 241-day delivery timeline. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and the use of Class I ozone-depleting chemicals is strictly prohibited; any substitutions require prior approval unless explicitly authorized by the specification. The supply is subject to stringent configuration change management, requiring engineering change proposals and formal variance requests for any deviations. Inspection and acceptance may occur at the manufacturer’s origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to foreign persons and requiring compliance with DFARS 252.225-7048; only DLA-approved contractors holding JCP certification, who have completed required DOD training and questionnaire, may access this data. Cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization, and covered defense information protocols are enforced. The contracting activity is the Department of Defense’s Land Supply Chain, with performance to be delivered to Tracy, CA, and primary point of contact is Meghan Ruehle.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333612
New
DIBBS
BODY, ACTUATORThe contract specifies the procurement of three BODY, ACTUATOR units under NSN 3010-01-084-9596 and Purchase Request 7017440116, with a total quantity of three units to be delivered FOB origin within 157 days of contract award, no later than August 25, 2027. All items must comply with DLA packaging requirements as defined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and marking standards per MIL-STD-129 with no special marking required. The units must be palletized according to DLA guidelines and shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, using the designated parcel post address and transportation protocols outlined in DLAD Proc Notes C19 and C20. The contract prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplied hardware, except for approved functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The unit of issue is each (EA), with zero variance permitted in quantity, and inspection and acceptance occur at the destination. The solicitation number is SPE7L3-26-T-124A, issued by the Department of Defense under NAICS code 333612, with technical and quality requirements incorporated by reference from the DLA Master List, and the revision in effect on the solicitation issue date controls compliance.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
GEAR, SPURThe contract pertains to the procurement of 17 spur gears identified by NSN 3020-00-869-5437 under solicitation SPE4A5-26-R-0245, with a delivery deadline of 368 days after award. This is a Navy-identified critical safety item requiring strict adherence to MIL-STD-129 for marking, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers on each unit pack. Although item unique identification is not required per the service customer’s request, all supplies must comply with DLA packaging standards and the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. The manufacturer must hold SAE AS9100 certification, and all configuration changes, waivers, or deviations must be formally submitted and approved by the DSC contracting officer. The item has no shelf life limitation, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Measuring and test equipment used must be calibrated and documented, and government identification must be removed from non-accepted supplies per RQ011. All documentation related to source approval and quality assurance must be maintained per RC001 and RQ002.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333612
New
DIBBS
COUPLING, SHAFT, FLEXThis contract specifies the supply of a flexible shaft coupling designated for use in mine sweeper MCM main propulsion systems, with the part number 79331F91 from Isotta Fraschini Motori SPA and NSN 3010-15-111-7600. Two units are required under solicitation SPE7L3-26-T-104R, with a delivery schedule requiring completion within 105 days from the contract award, delivered FOB origin to the designated receipt warehouse in Tracy, California. Acceptance and inspection occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, materials, and coding. The contract prohibits the use of class I ozone-depleting chemicals and any intentional introduction of mercury or mercury-containing compounds, except for approved functional uses such as in batteries, lighting, sensors, or naval-specified reagents, with all mercury-containing portable devices required to have shockproof design and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with applicable revisions tied to solicitation or award timelines depending on acquisition size. All items must be delivered with the specified unit of issue, and transportation details are governed by DLA procedural notes C19 and C20. The contract includes detailed marking, palletization, and shipping instructions, with the point of contact for inquiries listed as Benita Umoren.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333612
New
DIBBS
CLUTCH HALF, POSITIVThe contract pertains to the procurement of a CLUTCH HALF, POSITIVE, NONVEHICULAR item with NSN 3010-00-974-4952 and part number 133722A supplied by BORGWARNER TRANSMISSION SYSTEMS, under solicitation SPE7M4-26-T-270Y. A total of 22 units are required at a unit price of $22.00, with delivery scheduled to occur within 98 days from the contract date, FOB origin, and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, with packaging mandated to comply with ASTM D3951 and detailed labeling and palletization requirements as per MIL-STD-129 and DLA’s RP001 packaging standards, with DLA Master List technical and quality requirements taking precedence. The item is classified as a critical application and is subject to Cyberspace Maturity Model Certification (CMMC) Level 2 Self-Assessment, and any covered defense information must be handled in accordance with RD002. The contract specifies that all technical and quality requirements are drawn from the DLA Master List, with revisions controlled by the solicitations or award dates depending on acquisition size, and government identification must be removed from any non-accepted supplies. Delivery must be shipped to the DLA Distribution Depot in Tinker AFB, Oklahoma, by the required ship date of June 29, 2026, with an original delivery deadline of August 4, 2026. The solicitation is a total small business set-aside under NAICS code 333612, with Freddie Vazquez listed as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
HANDWHEELThe contract specifies the procurement of a handwheel with NSN 5340011791733 under solicitation SPE7L1-26-T-853G, requiring a total quantity of six units—four units under CLIN 0001 and two units under CLIN 0002—each priced at $1.00, with a firm fixed price and zero variance allowed. Delivery is due within 20 days from the required delivery date of July 16, 2026, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements, with non-hazardous items packaged per ASTM D3951 unless superseded by stricter DLA Master List technical and quality requirements. Hazardous materials must meet IP025 specifications. Sampling and quality verification follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and inspection must result in zero non-conformances unless otherwise stated. The item is subject to MIL-STD-130N identification and may require casting or forging, for which the contractor must seek assistance through DLA’s designated channels if tooling is not available. Shipping must use traceable methods only, with distinct destination addresses for each CLIN—one at Homestead AFB, Florida, and the other at Portland, Oregon. The contract is issued by the Department of Defense’s Land Supply Chain, with point of contact Michael Nordahl, and aligns with NAICS code 333612 for specialized machinery manufacturing.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
LEADSCREW, SCREW JACThis contract pertains to the procurement of a lead screw for a screw jack, identified by part number D2758-01-00 and NSN 3010-01-732-3696, with a quantity of four units required. The item is classified as a critical application item, and while unit identification is not mandated, all delivery and packaging must adhere strictly to DLA and MIL-STD guidelines. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the delivery window is set for 208 days from the contract award, with a firm need ship date of February 25, 2027. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification language, and substitutes require prior approval unless explicitly permitted. The contract is issued under solicitation number SPE7L3-26-T-123T as a total small business set-aside under NAICS code 333612, awarded by the Department of Defense’s Land Supplier Operations Vehicle Support branch. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The point of contact for the contract is Benita Umoren, reachable via phone and email, and full details including unit of issue conversion are available through official DoD resources. All terms are binding under federal procurement guidelines, with strict adherence to compliance, environmental restrictions, and logistical directives.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
GEARSHAFT, SPURThe contract pertains to the procurement of a GEARSHAFT, SPUR with NSN 3040-00-951-0272 and part number 55760-2, supplied by HYDRO-AIRE AEROSPACE CORP, designated as a critical application item requiring strict adherence to technical and quality standards. The requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements. Nine units are to be delivered in a single shipment with no variance in quantity, delivered FOB origin, and inspected and accepted at the destination. All packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract, with palletization following DLA guidelines. The delivery window is 157 days from the contract award, with an original required delivery date of July 28, 2027, though the needed ship date is January 5, 2027. The contract is issued under solicitation SPE7L3-26-T-123Y, with a total price of $81.00 at $9.00 per unit, and the goods must be shipped to the designated DLA Distribution Center in Cherry Point, North Carolina. Transportation is governed by DLAD Proc Note C19 for shipment and C20 for first destination, with contract data showing a posted date of July 20, 2026, and a response deadline of July 31, 2026, under NAICS code 333612.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES

Same awarding agency

NAICS: 484220
New
DIBBS
Specialized Freight Shipping (FOB Origin to DLA Anniston)The contract requires the specialized transport of finished transmission cradles from the manufacturer’s location to DLA Anniston, Alabama, with strict adherence to U.S.-flag vessel requirements for ocean transport, though compliant foreign-flag vessels may be used if authorized under applicable regulations. All shipping must comply with FOB Origin terms, meaning the responsibility for logistics, documentation, and risk transfers to the carrier once goods leave the manufacturer’s facility. The NAICS code 484220 indicates this is a contract for specialized freight shipping, specifically targeting heavy or sensitive cargo movement that demands precision and regulatory compliance. Performance is anchored at the Anniston location with the zip code 36201-4199, and the contract is issued under the Department of Defense’s Land Supplier Operations for Wheeled Vehicles, reflecting its importance to defense logistics. This is a subcontract solicitation posted on July 19, 2026, with responses due by July 30, 2026. There is no set-aside designation specified, meaning it is open to all eligible parties without preference for small businesses or other categories. The solicitation number SPE7L226T0568 serves as the primary reference for submissions, and all potential bidders must ensure full alignment with transportation compliance standards, particularly regarding vessel flagging and end-point delivery to the designated defense location. The opportunity is accessible via the DIBBS portal, and proposers are expected to demonstrate proven capability in handling high-value defense-related freight under strict regulatory frameworks.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Hazardous Materials Packaging and MarkingThe contract requires the packaging and labeling of coated components in full compliance with FED-STD-313 and IP025 hazardous material standards, ensuring all materials are properly identified and handled according to federal and industry safety regulations. It mandates the application of MIL-STD-129 barcoding for accurate tracking and inventory management, along with RP001-compliant palletization to guarantee secure and standardized transport logistics. The work is categorized as a subcontract under NAICS code 493190 and is being issued by the Department of Defense through the LAND SUPPLIER OPNS WHEELED VEHICLES office, with performance required at a facility in Anniston, Alabama, ZIP 36201-4199. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with no set-aside provisions specified.
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332813
New
DIBBS
High-Temperature and Chemical Agent Resistant Coating ApplicationThe contract requires the application of specialized chemical agent and high-temperature resistant coatings to transmission cradles in strict adherence to DCSC Drawing 16236, ensuring all performance and specification requirements are met. The work must comply with environmental regulations that explicitly prohibit the use of Class I ozone-depleting substances, mandating the use of approved, environmentally compliant materials and processes. The coatings must provide durable protection under extreme operational conditions while maintaining structural integrity and functional performance of the components. This subcontract is issued under the North American Industry Classification System code 332813 and is associated with the Department of Defense through its Land Supplier Operations Wheeled Vehicles office. Performance is mandated at the location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with all submissions required to meet deadlines and technical compliance without exception. The work is part of a broader effort to maintain readiness and sustainment of military vehicle systems under stringent quality and environmental standards.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Precision Manufacturing of Transmission Cradles for Combat TanksThe contract involves the precision manufacture of transmission cradles for M1-series combat tanks based on official Army engineering drawings and technical data packages, requiring full-scale machining, welding, and comprehensive quality inspection to meet military specifications. The work must be performed at the designated place of performance in Anniston, Alabama, with strict adherence to technical standards and quality control protocols to ensure operational readiness and survivability in combat environments. This is a subcontract solicitation issued under the NAICS code 332999 for other fabricated metal product manufacturing, with a response deadline of July 30, 2026, and a posting date of July 19, 2026. The contracting activity falls under the Department of Defense, specifically the Land Supplier Operations Wheeled Vehicles organization, and no set-aside provisions are indicated. All proposers must be prepared to meet rigorous defense manufacturing requirements without specification of small business preferences or geographic restrictions beyond the mandatory performance location.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect Controlled Unclassified Information on contractor systems, in full alignment with DFARS 252.204-7012 requirements. This subcontract is focused on ensuring cybersecurity compliance for Covered Defense Information as part of the Department of Defense’s broader effort to secure sensitive data within the supply chain. The work must be performed at the specified location in New Cumberland, Pennsylvania, with a response deadline of July 30, 2026, and the solicitation was posted on July 19, 2026. The North American Industry Classification System code 541512 identifies the nature of the work as encompassing computer systems design and related services, indicating the contractor is expected to provide technical expertise in cybersecurity implementation and support. All activities must adhere strictly to federal cybersecurity standards without deviation, with emphasis on continuous monitoring, documentation, and system integrity to meet DoD compliance obligations.
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract titled Hazardous Materials Compliance and Labeling requires strict adherence to OSHA and DFARS standards for the proper labeling, documentation, and management of hazardous materials used in manufacturing or cleaning processes, with a specific emphasis on Safety Data Sheet (SDS) management to ensure regulatory compliance. All activities must be performed at the place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work is structured as a subcontract under the NAICS code 541620, indicating services related to environmental and other scientific and technical consulting. The contract is managed by the Department of Defense through its Land Supplier Operations Wheeled Vehicles office, and all submissions must be received by the deadline of July 30, 2026, with the solicitation originally posted on July 19, 2026. Compliance with federal regulations regarding hazardous material handling is mandatory and critical to the fulfillment of this agreement.
Environmental Consulting Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation Services for Defense ShipmentThe contract requires certified packaging, preservation, and marking of military engine hoods in strict adherence to Defense Logistics Agency standards. Tasks include thorough cleaning and drying of components, application of protective cushioning to prevent damage during transit, and application of labeling that meets all regulatory and operational requirements for military shipments. All work must ensure the integrity and readiness of the engine hoods throughout the supply chain, from processing to delivery. Performance is mandated to occur at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation falls under NAICS code 493190 for other support activities for transportation and is structured as a subcontract under the Department of Defense’s Land Supplier Opns Wheeled Vehicles organization. The opportunity was posted on July 19, 2026, with a response deadline of July 30, 2026, leaving a narrow window for qualified vendors to submit proposals. Compliance with all technical, procedural, and regulatory requirements is essential for award consideration.
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336390
New
DIBBS
Manufacturing of Engine Compartment Hoods (NSN: 2510017278748)The contract calls for the fabrication, assembly, and delivery of military-grade engine compartment hoods designated by NSN 2510017278748, adhering strictly to Defense Logistics Agency specifications. All components must meet rigorous material, preservation, and packaging standards required for military use, ensuring durability and readiness under austere operational conditions. The work is to be performed under a subcontract structure with a designated place of performance in New Cumberland, Pennsylvania, at the ZIP code 17070-5002, indicating that final delivery and inspection will occur at this military supply location. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, providing suppliers with approximately eleven days to submit proposals. The NAICS code 336390 classifies this procurement under Other Transportation Equipment Manufacturing, signaling that the effort involves specialized fabrication beyond standard automotive production. While no set-aside preferences or point of contact details are specified, the procurement is managed by the Department of Defense under the Land Supplier Operations Wheeled Vehicles organization, underscoring its importance to vehicle maintenance and readiness across the military fleet.
Other Motor Vehicle Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Packaging & Preservation Services (Specialized)The contract demands specialized packaging, preservation, and palletization services strictly in accordance with MIL-STD-2073-1E, Special Packaging Instruction AM11581549, and DLA RP001, ensuring full military compliance for all handled materials. These standards require exacting procedures for protective packaging, environmental safeguarding, and secure pallet assembly to maintain equipment readiness during storage and transit, particularly for wheeled vehicles and related military assets. All work must adhere to rigorous defense logistics protocols to meet operational readiness requirements. Performed under a subcontract arrangement, the services are designated for the Department of Defense’s Land Supplier Ops Wheeled Vehicles program with performance centered in New Cumberland, Pennsylvania, at the zip code 17070-5002. The solicitation, posted on July 19, 2026, requires proposals to be submitted by July 30, 2026, and falls under NAICS code 561910 for other support services. The contract underscores the need for precise execution of defense-grade packaging methods to ensure the integrity, longevity, and deployability of military equipment throughout its lifecycle.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks regulatory compliance support for hazardous materials, focusing on the preparation of Safety Data Sheets (SDS) and the application of hazard warning labels in accordance with OSHA’s Hazard Communication Standard and MIL-STD-129. These deliverables must be completed and submitted prior to contract award to ensure full compliance with federal safety and labeling requirements for defense-related shipments. The work is classified as a subcontract under NAICS code 541690, indicating professional, scientific, and technical services, and is being managed by the Department of Defense under the organization name LAND SUPPLIER OPNS WHEELED VEHICLES. Performance is designated for NEW CUMBERLAND, PA, with a zip code of 17070-5002, and the solicitation opened on July 19, 2026, with responses due by July 30, 2026. All submissions must meet the technical and regulatory standards outlined by the government prior to any award being made.
Other Scientific and Technical Consulting Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) Services for NSN 3040015276865The contract requires the performance of First Article Testing on two units of NSN 3040015276865 to verify compliance with specified technical requirements. All testing activities must be documented and reported in strict accordance with FAR 52.209-3, ensuring full transparency and adherence to federal acquisition standards. The successful contractor is obligated to complete all testing, submit final reports, and deliver the tested units within 120 days of contract award. The work is classified as a subcontract under NAICS code 541380, and the place of performance is identified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted by the Department of Defense under the organization Land Supplier Ops Wheeled Vehicles, and responses are due by July 30, 2026.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336340
New
DIBBS
Supply of NSN 3040015276865 (Wheeled Vehicle Component)The contract requires the manufacture or supply of 61 units of a military wheeled vehicle component identified by NSN 3040015276865, with full compliance to federal packaging, marking, and documentation standards. The work is being procured under a subcontract arrangement by the Department of Defense through the Land Supplier Operations for Wheeled Vehicles, and the performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, indicating a short turnaround for proposals. The North American Industry Classification System code 336340 confirms the scope relates to military vehicle manufacturing. All deliverables must meet exacting military specifications, and failure to adhere to packaging or documentation guidelines could result in rejection. The contract is part of a broader effort to support the maintenance and readiness of wheeled vehicle fleets within the Defense infrastructure.
Motor Vehicle Brake System Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details