Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COVER

Active
SPEFA5-26-T-0953Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, issued by the Defense Logistics Agency (DLA) under solicitation SPEFA5-26-T-0953, pertains to the procurement of one unit of item NSN 1560-LN-003-5718, with part number 65202-03082-101, designated for delivery to the Fleet Readiness Center in Cherry Point, North Carolina. The contract enforces strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and mandates compliance with MIL-STD-129 for marking and labeling, as well as RP001 for packaging and palletization. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. All packaging must meet DLA’s prescribed standards, and the item has no shelf life restriction. The delivery is due within 84 days from the contract award, FOB destination, with inspection and acceptance occurring at the delivery point. The quantity is fixed with zero variance allowed, and the unit of issue is each (EA) priced at $1.00. The item must be packaged according to DLA guidelines, including proper Unit of Issue and Quantity per Unit Pack (QUP) labeling. Delivery instructions specify two separate addresses: one for parcel post and another for freight shipping, both directed to the same DLA facility. The original required delivery date is January 20, 2027, with the solicitation issued on July 26, 2026, and responses due by August 3, 2026. The contract is governed by federal procurement regulations under NAICS code 488190, with primary point of contact Larry Kemp at DLA Fleet Readiness Center.

General Info

Procurement of one cover NSN 1560-LN-003-5718 via DLA solicitation SPEFA5-26-T-0953, due August 3, 2026.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

PSC 8021, CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(1)

SPEFA5-26-T-0953.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
View Agency Profile
Office AddressUS
Contacts
Larry Kemp
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COVER
COVER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SIKORSKY AIRCRAFT CORPORATION 78286 P/N 65202-03082-101
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017623159 0001 EA 1.000
NSN/MATERIAL:1560LN0035718
DELIVERY (IN DAYS):0084
DELIVER FOB: DESTINATION
SPEFA5-26-T-0953
SECTION B
PR: 7017623159 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
PSC 8021
CHERRY POINT NC 28533-0021
US
FREIGHT SHIPPING ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
BEACHEY ROAD, BUILDING 148, BAY C
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:01/20/2027
SPEFA5-26-T-0953 NSN/Part Number: 1560-LN-003-5718 Quantity: 1 EA Purchase Request: 7017623159QTY: 1 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
COLLAR, BABY NO-NECKThe product is a rigid one-piece baby no-neck collar measuring 2.25 inches by 17.5 inches, designed to maintain the cervical spine in a safe, neutral position, featuring color-coded straps and a front panel construction. It is sold individually with a unit of issue of each, and the specific NSN is 6515-01-467-4092 with a quantity of four units requested under purchase request 7017617241. The contract is solicited under SPE2DS-26-T-272W with a response deadline of August 3, 2026, and delivery must be completed within 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA procurement standards. The item is classified under NAICS code 488190 and is being procured by the Department of Defense through the Medical Supply Chain MD Surg FSF for performance at Fort Bragg, North Carolina. The solicitation incorporates provisions for handling covered defense information and requires removal of government identification from non-accepted supplies. Bidders must clearly indicate the source and part number being offered, and all correspondence should be directed to Katy Recinos at the provided contact information.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
PLATE, IDThe contract pertains to the procurement of a plate identified by part number HP1060117-1 and NSN 9905-LL-NCB-1189, with a quantity of 28 units to be delivered FOB destination within 27 days of contract award. The item must be manufactured organically in accordance with drawing HP1060117 by the contractor with CAGE code 96916 and must comply with MIL-STD-130N dated November 16, 2012, for identification marking of U.S. military property. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at assigned levels of VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging shall adhere to ASTM D3951 as supplemented by MIL-STD-129 for marking and labeling, and palletization must conform to DLA Packaging Requirements for Procurement RP001. The material has no shelf life requirement. Delivery is to be made to the Fleet Readiness Center DLA at Cherry Point, North Carolina, with inspection and acceptance occurring at the destination. The unit of issue is EA, and quantity variance is strictly zero percent. The solicitation number is SPEFA5-26-T-0954, with a response deadline of August 3, 2026, and the original required delivery date is September 29, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SPRING, HELICAL, COMPRESThis contract requires the delivery of one helical compression spring identified by NSN 5360-01-625-7141, with a delivery deadline of 20 days after award. The solicitation number is SPE7L1-26-T-877D, issued under the Department of Defense’s Land Supply Chain, with responses due by August 6, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, documentation for source approval, and the removal of government identification from non-accepted items. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016. The item must be free of ozone-depleting chemicals and asbestos; any substitutes must be submitted for approval unless explicitly authorized. The point of contact for inquiries is Kristina Derry at the provided email and phone number, and the place of performance is listed as FPO, ZIP 09591.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488190
New
DIBBS
International Freight & Delivery to Al Kharj, Saudi ArabiaThe contract involves the transportation and delivery of defense supplies originating in the United States to Al Kharj, Saudi Arabia, under the Foreign Military Sales program. It requires full compliance with U.S. export control regulations, secure handling of sensitive materials, and accurate documentation throughout the supply chain. The provider must manage customs clearance in both origin and destination countries, ensuring timely and lawful movement of goods while adhering to all international trade and defense logistics standards. All activities must align with the stringent requirements of defense-related international shipments. This is a small business set-aside subcontract classified under NAICS code 488190, which pertains to other support activities for air transportation, indicating a focus on specialized logistics support. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026. The contracting activity falls under the Department of Defense’s Land Supply Chain office, emphasizing coordination within military logistics networks. Performance is designated for Al Kharj, Saudi Arabia, and all parties must ensure operational readiness, regulatory compliance, and secure end-to-end delivery to support U.S. defense commitments abroad.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
INDICATOR, AIRCRAFT,This contract, issued under solicitation number SPE7M1-26-U-4417 by the Department of Defense’s Maritime Supply Chain, is a unilateral Simplified Indefinite-Delivery Contract (SIDC) for the procurement of four aircraft indicators identified by NSN 1710015220170. Delivery is required within 146 days after award, FOB origin, with inspection and acceptance occurring at the destination. The contract specifies no variance in quantity and mandates compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the application of contract number, NAWC CAGE code, and part number on bare items, unless superseded by technical drawings. Palletization must adhere to DLA’s RP001 Packaging Requirements, and a special marking code of 00-00 indicates no additional special marking is required. The item is classified as a critical application and must meet NAVAIR aircraft launch and recovery equipment traceability standards. Mercury and mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified chemical reagents, with portable devices containing mercury requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. The contractor must comply with CMMC Level 2 self-assessment requirements and NIST SP 800-171 DOD assessment mandates, while also submitting Safety Data Sheets for any hazardous materials in accordance with 29 CFR 1910.1200. Ocean transport must use U.S.-flag vessels unless a waiver is granted 45 days in advance. Invoicing is required through Wide Area WorkFlow (WAWF), and all responses must be submitted electronically via DIBBS by the July 24, 2026 deadline. The contract incorporates multiple FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment verification, cybersecurity, hazardous materials, unauthorized obligations, and contractor representations including UEI and CAGE codes, size status, and socioeconomic certifications. Although the unit and total prices are not listed, the maximum contract value is capped at $350,000, and the estimated quantity is non-binding, reflecting the indefinite-delivery nature of the agreement.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
CARBON SEAL MATCHING,The contract pertains to the procurement of one carbon seal matching ring with NSN 5330LN0035445 and part number 4953951 from RTX Corporation, valued at $1.00, under solicitation SPEFA5-26-T-0921. Delivery is required FOB destination to DLA Distribution Cherry Point in North Carolina within 86 days of contract award, with a strict delivery deadline of October 19, 2026, and zero tolerance for quantity variance. The item is identified as a critical application item with no shelf life requirement. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard, including ASTM D3951 for packaging. Packaging and labeling must fully comply with MIL-STD-129 for marking and barcoding, with palletization adhering to RP001 DLA Packaging Requirements for Procurement. Quality assurance inspections are to be conducted at destination using MIL-STD-1916 or ASQ H1331 Table 1, with acceptance based on zero non-conformances unless otherwise specified; unspecified attributes are treated as major with an AQL of 1.0. The contractor must implement a quality system consistent with SAE AS9003 or ISO 9001 tailored to SAE AS9003. All hazardous materials must be labeled in accordance with 29 CFR 1910.1200 unless falling under specific federal regulations like FIFRA or FHSA, and manufacturers must submit hazard warning labels and MSDS for non-exempt materials prior to award. The contract mandates electronic invoicing through Wide Area WorkFlow and requires compliance with cybersecurity controls, including NIST SP 800-171, safeguarding of contractor information systems, and authorization and consent provisions for government use of technical data under Alternate I and II of FAR 52.227-1. Offerors must provide current UEI and CAGE codes, and representations regarding small business status, joint venture participation, and covered defense telecommunications equipment are required. The contract incorporates numerous FAR and DFARS clauses related to contract modifications, accelerated payments to small business subcontractors, unenforceability of unauthorized obligations, and prohibition of internal confidentiality agreements, with no option quantities or extensions permitted. All deliverables must meet federal, defense, and environmental compliance standards without exception
CHERRY POINT PHANTOM RD BLDG

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
Federal
International Mortuary Transportation and Escort ServicesThe contract seeks a provider to deliver international door-to-door transportation of human remains under strict dignified transfer protocols, requiring climate-controlled transit and hermetic sealing to ensure preservation and respectful handling throughout the journey. Services must include full customs clearance coordination and seamless integration with MILAIR operations to facilitate timely and secure movement across international borders, with trained and vetted escorts assigned to accompany each transfer to uphold protocol and provide appropriate ceremonial support. The work is scoped for performance out of Landstuhl and is issued as a subcontract under the Department of Defense’s W40M MRC0 West office, categorized under NAICS code 488190 for other support activities for air transportation. The solicitation is open for responses until August 6, 2026, and is part of a broader effort to ensure consistent, high-standard mortuary transport services for military personnel and dependents, emphasizing operational precision, cultural sensitivity, and regulatory compliance across international jurisdictions.
W40M MRC0 West

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 488190
New
Federal
Aircraft Exterior Washing Services – Scheduled and UnscheduledThe contract requires the provision of exterior washing services for HC-130J aircraft stationed at Kirtland Air Force Base, with a total of six scheduled washes annually and the potential for up to two additional unscheduled washes, all to be completed within a strict 16-hour window per event. The contractor is fully responsible for supplying all necessary labor, equipment, tools, cleaning compounds, supervision, and quality control measures to ensure consistent and high-standard service delivery. The work must be performed at the designated location in Road Forks, New Mexico, with a zip code of 87117, and all tasks must align with operational requirements and safety standards specific to U.S. Air Force assets. This is a small business set-aside contract under the SBA designation, classified under NAICS code 488190, and falls under the Department of Defense through the W7NQ Uspfo Activity Nmang 150. The solicitation was posted on July 24, 2026, with responses due by July 31, 2026, at 5:00 p.m. The nature of the agreement is structured as a subcontract, emphasizing the need for a capable and responsive small business to meet the precise logistical and operational demands of maintaining aircraft cleanliness in a military environment without disrupting mission-critical timelines.
W7NQ Uspfo Activity Nmang 150

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
Federal
TSA Gold+ COMMERCIAL SERVICES IDIQ CONTRACT SOLICITATIONThe Transportation Security Administration’s TSA Gold+ initiative is being procured through an Indefinite-Delivery Indefinite-Quantity (IDIQ) contract solicitation numbered 70T05026R5900N005, issued by the Department of Homeland Security under NAICS code 488190. The contract requires a complete turnkey solution to deliver and manage advanced security screening technology along with a trained workforce capable of screening passengers and belongings at participating airports for explosives, weapons, and other prohibited items. The solicitation encompasses a two-phase evaluation process, with Phase 1 proposals due by 1:00 PM EDT on July 31, 2026, following an extension from the original deadline. This deadline was adjusted in Amendment 0001, which also replaced the initial solicitation document and included updated attachments such as Gold+_CM Req_Attachment_7.16.26 and the addition of the 43 H RTM Template. Subsequent amendments, 0002 and 0003, were issued to incorporate clarified answers to offeror questions but did not alter the Phase 1 submission deadline. The contract is structured as a firm-fixed-price IDIQ with an initial minimum guarantee task order of $5,000 and includes an incentive clause allowing for payments up to 12% above the base firm-fixed price for exceeding performance metrics. Performance will occur at designated airports across the U.S., with services extending over a ten-year ordering period beginning September 28, 2026. The solicitation mandates strict adherence to a comprehensive set of deliverables, including detailed design packages, configuration management documentation, and performance reporting aligned with TSA-specific standards and directives. Attachments include critical documents such as the Performance Work Statement, Configuration Management Plans, Maintenance Requirements, SSI Policies and Procedures Handbook, ITAR Terms and Conditions, Governance Framework, and multiple TSA Handbooks and Technical Guides. The contract incorporates extensive FAR and HSAR clauses, notably FAR 52.212-4, FAR 52.216-18, and HSAR 3052.212-70, along with unique special requirements addressing SSI and CUI handling, personal identity verification, security clearances, contractor employee access, and non-discrimination compliance under Section 504. All subcontractors must flow down these same requirements. Proposals must be submitted electronically via email in specified
Mission Essentials

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
Federal
Fuel Tank RepairThe U.S. Coast Guard’s Aviation Logistics Center is soliciting quotations for fuel tank repair services under solicitation number 70Z03826QB0000177, issued as a combined synopsis and request for quotation in accordance with FAR subpart 12.6 as modified by the Revolutionary FAR Overhaul effective November 28, 2025. This is an unrestricted commercial solicitation with no set-aside, open to all responsible sources meeting the requirements, with the small business size standard set at $40 million in annual receipts. The North American Industry Classification System code for this procurement is 488190, and awards will be made on a firm-fixed-price basis following competitive evaluation. Interested vendors must submit quotes by email to Raymond V. Marler at raymond.v.marler@uscg.mil with the solicitation number clearly indicated in the subject line; phone calls are not accepted. The closing date for submissions is July 29, 2026, at 9:00 a.m. EDT. Supporting documents including the Requirements, Statement of Work, Terms and Conditions, and applicable wage determinations for Virginia and Tennessee are attached and form an integral part of the solicitation. Performance is expected to be carried out at the agency’s facility in Elizabeth City, North Carolina, with all inquiries directed exclusively through the provided email contact.
Aviation Logistics Center (ALC)(00038)

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
Federal
Repair of Panel Control, Elec and MultichannelThis solicitation, numbered 70Z03826QH0000077, is a combined synopsis and request for quotation for commercial items issued under FAR Subpart 12.201 and governed by the Revolutionary FAR Overhaul as of November 28, 2025. It seeks repair services for one PANEL, CONTROL, ELECT, NSN 6110-01-433-4990, Part Number 712940-1, with an additional line item for Beyond Economic Repair or No Fault Found evaluation. The requirement is unrestricted and does not use a small business set-aside, with the small business size standard set at $40,000,000. The acquisition is anticipated to be awarded on a sole-source basis to G.E. AVIATION (CAGE: 19623) based on fair and reasonable pricing and an affirmative responsibility determination. Offers must be submitted as firm-fixed price quotes at a fully burdened rate and are due by July 28, 2026, at 12:00 PM EDT, with submission via email to designated USCG addresses and the RFQ number clearly indicated in the subject line. Performance is required at the USCG Aviation Logistics Center in Elizabeth City, NC, under F.O.B. Destination terms, with delivery hours from 6:00 AM to 3:30 PM. The contract includes a unilateral option to increase the quantity by up to two additional units for a maximum of three total, exercisable within 365 days of award at the original unit price. All items must be individually packaged and labeled in compliance with ASTM D3951-15, excluding prohibited materials such as Styrofoam, popcorn, or peanut packaging, and must include full traceability with NSN, P/N, S/N, and contract details on both internal and external shipping documentation. A Certificate of Conformance per FAR 52.246-15 and an Airworthiness Certification equivalent to FAA Form 8130-3/8130-4 or EASA 1 Form are mandatory, along with PMA documentation. Technical data access and the ability to update technical orders are pass/fail gates requiring submission of documentation such as a TODO account code or DD-2345. The contractor must comply with ethical, labor, trade, and flow
Aviation Logistics Center (ALC)(00038)

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 488190
New
Federal
T-6/T-34 Aircraft Maintenance and Contractor Logistics Support (CLS): Draft Request for Proposal (RFP)The U.S. Navy is seeking proposals for T-6 and T-34 aircraft maintenance and Contractor Logistics Support services under a draft Request for Proposal with solicitation number N00421-26-R-1011, issued by the Naval Air Warfare Center Air Division at Patuxent River, Maryland. Offerors must submit responses by August 7, 2026, and are advised that a comprehensive Technical Data Library containing detailed information on requirements will be available upon request prior to the final solicitation release, subject to government review and approval. This library is critical for understanding the full scope of technical and operational expectations. The NAICS code 488190 applies, and the contract is open to all qualified suppliers without a specific set-aside designation. Primary and secondary points of contact are provided for inquiries, with Casey Bacon and Kathleen Dougherty serving as the main liaisons. All draft documents and attachments must be accessed through the PIEE Solicitation Module, and interested parties should note that no place of performance details are currently specified.
Naval Air Warfare Center Air Division

POSTED

3 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

NAICS: 332994
New
DIBBS
Tube Assembly Manufacturing and Delivery (Elbow-to-Elbow)The contract is for the manufacture and delivery of three units of a tube assembly identified by NSN 1560LLNC15516, designed with an elbow-to-elbow configuration, and must meet all applicable military packaging, labeling, and hazardous materials handling standards. This is a subcontract under the Department of Defense, specifically managed by the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, zip code 28533-0021. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026, with the North American Industry Classification System code 332994 indicating it falls under other miscellaneous fabricated metal product manufacturing. No set-aside designation or point of contact details are provided, and all work must be executed in full compliance with defense logistics and safety regulations.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
Commercial Diaphragm Supply and DeliveryThe contract requires the supply, packaging, labeling, and delivery of 25 units of a specified diaphragm identified by NSN 1015LN0034266 to a military destination designated by DLA Fleet Readiness Center DLA PSC. All units must comply with federal military standards for packaging, marking, and inspection to ensure readiness and compatibility with defense logistics systems. The delivery site is located at Cherry Point, North Carolina, with a zip code of 28533-0021, and performance must align with the stringent quality and documentation requirements mandated by the Department of Defense. This subcontract, posted on July 23, 2026, with a response deadline of July 31, 2026, falls under NAICS code 332994, indicating fabrication of other finished metal products. There is no set-aside classification indicated, and the procurement is managed under the DLA framework to support fleet readiness operations. Interested parties must submit proposals through the official DIBBS portal by the stated deadline, and failure to meet packaging or labeling specifications could result in rejection regardless of product suitability.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with hazard communication standards under OSHA 29 CFR 1910.1200 for all hazardous materials linked to valves and their packaging. This includes the preparation of accurate safety data sheets, proper hazard labeling, and ensuring all documentation and signage meet federal regulatory requirements. The work must be performed in alignment with the specified safety protocols to safeguard personnel and ensure regulatory adherence throughout the supply chain. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, ZIP code 28533-0021. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026. The NAICS code 541620 indicates the work falls under environmental consulting services, reflecting the technical and compliance-focused nature of the deliverables. All activities must be completed within the stipulated timeframe to meet federal procurement obligations.
Environmental Consulting Services

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Palletization ServicesThe contract requires comprehensive packaging, labeling, and palletization services for solenoid valves destined for government shipment, adhering strictly to MIL-STD-129 standards for labeling, ASTM D3951 for packaging, and RP001 for palletization. These specifications ensure that all items are properly identified, protected during transit, and arranged for efficient handling and storage within military logistics systems. The work must be performed to meet exacting Department of Defense requirements, with compliance verified throughout the process to guarantee readiness and interoperability across defense supply chains. The solicitation is issued under NAICS code 561910 as a subcontract opportunity through the DLA Fleet Readiness Center at DLA PSC, with performance required at Cherry Point, North Carolina, 28533-0021. Interested parties must submit responses by the deadline of July 31, 2026, following the solicitation posted on July 23, 2026. The nature of the work demands proven expertise in military-grade packaging and labeling procedures, with strict attention to detail and documentation to ensure seamless integration into government logistics operations. All contractors must be prepared to deliver fully compliant units without deviation, as failure to meet the stated standards may result in rejection of the shipment.
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 335312
New
DIBBS
Solenoid Valve Supply and DeliveryThe contract requires the procurement and delivery of six units of a specified solenoid valve that must fully comply with MIL-spec standards, ensuring adherence to military-grade performance, durability, and safety requirements. Each unit must be properly packaged and labeled in accordance with federal and defense logistics protocols to guarantee traceability and readiness for military use. Delivery is to be made FOB destination to DLA Cherry Point, with the specified zip code 28533-0021, meaning the supplier assumes all costs and risks until the valves arrive at this location. The solicitation falls under NAICS code 335312, which categorizes it within the electrical equipment manufacturing sector, and is issued by the Department of Defense's DLA Fleet Readiness Center. The opportunity was posted on July 23, 2026, with a response deadline of July 31, 2026, and is structured as a subcontract, indicating it may be part of a larger prime contract or procurement chain. The delivery point and exact specifications underscore its critical role in logistical or operational systems supported by the military at Cherry Point.
Motor and Generator Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 493190
New
DIBBS
Defense Logistics Packaging & Marking ServicesThe contract requires comprehensive packaging, preservation, and labeling services in full compliance with MIL-STD-129, ASTM D3951, and RP001 standards for shipment to the Defense Logistics Agency. This includes precise application of data matrix barcodes and proper palletization to ensure traceability, durability, and regulatory adherence throughout the defense supply chain. All work must be executed to meet rigorous military logistics requirements, with emphasis on accuracy, consistency, and readiness for inbound processing at DLA facilities. Performance is designated for Cherry Point, North Carolina, with a deadline for responses by July 31, 2026. The solicitation falls under NAICS code 493190 for Other Supporting Activities for Transportation, and is issued as a subcontract by the Department of Defense through the DLA Fleet Readiness Center. This procurement is focused on ensuring end-to-end logistical compliance for defense materiel, with all packaging and marking activities subject to strict DLA quality and documentation protocols.
Other Warehousing and Storage

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires full compliance with hazard communication standards for shipped components, encompassing the accurate preparation, maintenance, and distribution of Safety Data Sheets in accordance with OSHA’s 29 CFR 1910.1200 and the implementation of MIL-STD-129 for standardized labeling. All labeling must meet federal regulatory requirements to ensure proper identification of hazardous materials during transportation and handling, with strict adherence to format, content, and placement guidelines. The work is classified under NAICS code 541690 and is issued as a subcontract by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, 28533-0021. Proposals must be submitted by the deadline of July 31, 2026, to meet the solicitation’s technical and regulatory expectations.
Other Scientific and Technical Consulting Services

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332321
New
DIBBS
Precision Sheet Metal Fabrication – Aircraft Gutter ComponentThe contract calls for the precision fabrication of a right-hand aircraft gutter component in strict accordance with military specifications, requiring full compliance with material standards, dimensional tolerances, and surface finish requirements to ensure compatibility and performance within aviation platforms. The component must be manufactured to exacting standards suitable for integration into military aircraft systems, with quality control measures embedded throughout the production process to guarantee structural integrity and operational reliability. The work is solicited as a subcontract under NAICS code 332321, with performance required at Cherry Point, North Carolina, 28533-0021. The opportunity was posted on July 23, 2026, and responses are due by July 31, 2026, with the contracting entity being the DLA Fleet Readiness Center under the Department of Defense. All submissions must meet the technical, regulatory, and logistical expectations outlined by the government, and participation is restricted to qualified subcontractors capable of delivering defense-grade sheet metal components on schedule and to specification.
Metal Window and Door Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 331315
New
DIBBS
Supply of 7075-T6 Aluminum Sheet with MRS TreatmentThe contract calls for the supply of 144 linear feet of 7075-T6 aluminum sheet, 0.063 inches thick and 48 inches wide, featuring a clad surface and treated to achieve minimum residual stress to ensure dimensional stability and structural integrity. The material must comply with AMS-QQ-A-250/18 Revision B specifications, ensuring it meets stringent aerospace-grade quality and mechanical property standards. All units must be packaged per DLA RP001 guidelines and labeled in accordance with MIL-STD-129 to guarantee proper identification, traceability, and handling throughout the supply chain. Delivery is F.O.B. destination, meaning the supplier assumes all responsibility and cost for transportation until the goods reach the specified delivery point. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with a response deadline of July 30, 2026, and is classified under NAICS code 331315 for aluminum rolling, extruding, and drawing.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 332813
New
DIBBS
Corrosion Protection and Surface Coating ServicesThe contract seeks providers of corrosion protection and surface coating services for fabricated metal components, specifically to meet rigorous military environmental standards that ensure long-term durability and operational readiness. Services must include the application of protective coatings, plating, or specialized surface treatments designed to withstand extreme conditions, with performance requirements aligned to defense sector specifications. The work is to be performed at Cherry Point, North Carolina, with a strict submission deadline of July 31, 2026, and the opportunity is structured as a subcontract under the NAICS code 332813 for metal coating, engraving, and related services. The contracting entity is the Defense Logistics Agency Fleet Readiness Center under the Department of Defense, indicating a high-security, mission-critical context where compliance, quality control, and adherence to military protocols are non-negotiable.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 811212
New
DIBBS
MIL-STD-129 Compliant Labeling and Packaging ServicesThe contract requires the provision of barcode labeling, marking, and packaging services strictly compliant with MIL-STD-129 standards for defense-related shipments, ensuring uniformity and traceability across military logistics. Services must meet all technical and procedural requirements outlined in the military standard for identifying, labeling, and packaging materiel destined for the Department of Defense supply chain, including correct data content, symbology, placement, and durability of labels. The work is specifically scoped for performance at Cherry Point, North Carolina, with the DLA Fleet Readiness Center DLA PSC as the overseeing agency under the Department of Defense. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of July 31, 2026, and is classified under NAICS code 811212 for industrial and commercial laundry and drycleaning services, though the actual work centers on defense packaging and labeling. The contract is not subject to any set-aside provisions and is open to eligible subcontractors capable of delivering MIL-STD-129-compliant solutions. Performance must align with DoD logistical integrity standards, and bidders must be prepared to demonstrate proven experience and compliance capabilities in military packaging and labeling operations. All submissions should be directed via the DIBBS platform using the provided solicitation link.
Computer and Office Machine Repair and Maintenance

POSTED

4 days ago

DEADLINE

in 4 days
View Details