Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COVER, ACCESS, AIRCRA

Active
SPE4A7-26-Q-0903Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract covers the procurement of two units of a cover and access component for aircraft under solicitation SPE4A7-26-Q-0903, with a delivery deadline of 350 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on the acquisition size. The item is classified as Covered Defense Information and is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted supplies. Technical data associated with this item is subject to export controls under ITAR or EAR, and its disclosure to foreign persons, including foreign nationals within the U.S., is prohibited without prior authorization. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The contract is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Eugene Wilkens as the primary point of contact.

General Info

Procure two aircraft cover and access components, delivery in 350 days, CMMC Level 2, ITAR/EAR controlled, U.S./Canada certification required.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-Q-0903.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Wilkens Eugene
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COVER,ACCESS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INCLUDE RQ017 OBJECT TEXT ID ST
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-00-351-0168 Quantity: 2 EA Purchase Request: 7017408913QTY: 2 Delivery: 350 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
TUBE, TORQUE, ACTUATIThe contract pertains to the procurement of two torque tubes for flap actuation with NSN 1680-00-438-9161, under solicitation SPE4A6-26-Q-1205, with a delivery requirement of 252 days after award. The item is subject to strict export control due to the presence of technical data regulated under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export-controlled data training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire are permitted to access this data. Additional requirements include CMMC Level 2 certification for third-party assessors and adherence to physical identification and bare item marking standards. The contract is managed by the Department of Defense’s ASC Commodities Division, with Bryan Distin as the primary point of contact, and responses must be submitted by August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract calls for the delivery of five structural plates designated as AI, identified by NSN 1560-01-716-9242, under solicitation SPE4A5-26-T-311K, with a required delivery date 197 days after award and a need ship date of May 12, 2026. The items must be supplied FOB origin with zero tolerance for quantity variance and are subject to inspection and acceptance at the destination. Packaging must comply with DLA’s specific procurement requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the material is classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging and palletization must adhere to RP001, and the Unit of Issue is EA. Supplier compliance with technical and quality standards referenced in the DLA Master List is mandatory, including CMMC Level 2 self-assessment, ISO 9001:2015, and requirements related to measuring equipment and removal of government identification from non-accepted items. Item Unique Identification is not required per the service customer’s request. Sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916. Delivery is to DLA Distribution at the New Cumberland Facility in Pennsylvania, with transport instructions governed by DLAD procedural notes. The contract is under the NAICS code 336413, managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Johquin Wiley as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRY FIRE MAGAZINE, PThe dry fire magazine is a specialized training aid designed exclusively for use with 9 millimeter pistols, engineered to simulate the insertion and removal of a functional magazine for trigger reset practice without holding any ammunition. It has strict dimensional specifications: length between 5.05 and 5.07 inches, height between 1.56 and 1.58 inches, width between 1.19 and 1.21 inches, and a cubic measure of 9.53 cubic inches to ensure proper fit and function within the designated firearm. The item is not a functional magazine and cannot hold rounds, serving solely as a mechanical training tool to replicate the handling and cycling actions of a real magazine during dry fire exercises. The unit of issue is each, with a quantity of four units required under purchase request 7017643625 and an anticipated delivery within five days of award. The item is identified by NSN 6910-01-708-4254 and is procured under solicitation SPE2DS-26-T-278T, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF. Packaging must comply with DLA packaging requirements, and all technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation. The point of contact for inquiries is Tiffany Parker, and the place of performance is FPO, ZIP 96692-7200, with responses due by August 3, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
PUMP, FUEL, METERINGThe contract is for the procurement of eight fuel metering pumps, identified by NSN 2910-01-561-0259 and part number 8-97190-378-0, supplied by ISUZU DIESEL OF NORTH AMERICA. The item has no shelf life requirement and must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging, preservation, and marking must strictly follow MIL-STD-2073-1E, MIL-STD-129, and MIL-P-16789, with palletization adhering to DLA packaging requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with a zero-defect acceptance criterion unless otherwise specified, and attributes are to be classified with assigned verification levels or AQLs. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and the full quantity of eight units must be delivered within 153 days of contract award, with no tolerance for variance. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 11, 2027. Transportation details are governed by DLA procedural notes C19 and C20. The solicitation, issued under contract number SPE7L5-26-T-4650, is a total small business set-aside under NAICS code 336413, with a response deadline of August 10, 2026. The unit price is set at $701,628,5661 per unit, with a total contract value of $5,613,028,528. All documentation, including configuration change management, variance requests, and removal of government identification, must follow the prescribed DLA protocols. The point of contact for inquiries is Paul Doerfler at the Department of Defense, Land Supplier Operations Engines.
LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
PLATE, TRANSFER, VALVThe contract is for one unit of a plate, transfer, valve identified by NSN 1660010526092 and Honeywell part number 3166677-1, issued under solicitation SPE4A5-26-T-310R with delivery required within 20 days FOB origin. The item must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, container codes, and labeling per MIL-STD-129 with no special marking required. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Undefined attributes are treated as major. Inspection and acceptance occur at origin with zero tolerance for non-conformances unless otherwise stated. The item has no shelf life restriction. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the contractor must adhere to DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers. Removal of government identification from non-accepted supplies is required, and physical marking of bare items is mandatory. The unit of issue is each, with no quantity variance permitted. Delivery is to be palletized per DLA packaging standards and shipped via freight forwarder DBE002.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTINGThis contract specifies the procurement of a metal casting fitting identified by NSN 1560-01-256-2176 and part number 209-064-228-101, with a quantity of ten units to be delivered within twenty days under FOB origin terms. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Physical identification of the bare item must comply with RQ017, and configuration change management requires an Engineering Change Proposal for any deviations, with waivers or deviations formally requested. The item is classified as a Critical Application Item, and the manufacturer must adhere to zero-defect sampling under MIL-STD-1916 or an equivalent zero-based plan, assigning verification levels and AQLs for critical, major, and minor attributes. Cybersecurity compliance at CMMC Level 2 is mandatory through a self-assessment, and the use of government-identifying information on non-accepted supplies must be removed per RQ011. Tooling for the casting process must be sourced through designated DLA supply chain teams, and packaging must align with DLA’s RP001 standards including palletization, unit containers, and intermediate packaging codes. The delivery destination is the Taiwan Army Zuo-Ying Ammunition Subfacility, with the final shipment directed by freight forwarders as outlined in DLAD procedural notes. The contract does not require Item Unique Identification as per DFARS 252.211-7003(c)(1)(i) due to the Service customer’s request.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COMThis contract pertains to the procurement of a support structural component for aircraft, identified by part number 209-001-327-101 and NSN 1560-01-333-0390, with a quantity of two units to be delivered within twenty days of contract award. The item is designated as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with specific revisions controlled by the solicitation issue date. Compliance includes adherence to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking specifications, and DLA packaging requirements, with no special marking required and no unit identification mandated per the Service customer’s request. Sampling protocols must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and all attributes are to be classified with verification levels or AQLs as defined, with unspecified attributes treated as major. The contractor must implement configuration change management procedures, maintain cybersecurity maturity certification level 2 through self-assessment, and satisfy documentation standards for source approval requests. Delivery is FOB origin to the Taiwan Army’s Zuoying Ammunition Sub-unit in Kaohsiung, with no variance allowed in quantity and inspection and acceptance occurring at the origin. The contract is issued under a federal procurement system with the NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with point of contact Kay Bates. The required delivery date is July 30, 2026, and the solicitation closed on August 5, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
MANIKIN, RESUSCITATIONThe contract specifies the procurement of a single set of an adult CPR training manikin designed for intermediate-level resuscitation instruction, featuring a medium skin tone and gender-neutral design to support inclusive training environments. The manikin is equipped with an integrated CPR rate monitoring system that uses LED indicators to visually guide correct compression rates between 100 and 120 per minute and emits an audible click when chest depressions reach the appropriate depth for effective compressions. It operates on two AA batteries and includes ten replacement face shield/lung bags and a durable nylon carry case for storage and transport. The unit is classified under the NSN 6910-01-708-0577 and must comply with all applicable DLA packaging and technical quality requirements as defined in the DLA Master List of Technical and Quality Requirements. Delivery is required within 20 days of award, with performance occurring at Norfolk, Virginia, under the procurement reference 7017638336 and solicitation SPE2DH-26-T-5572, which was posted on July 28, 2026, with responses due by August 4, 2026. The acquisition is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTINGThe contract pertains to the procurement of a fitting, identified by NSN 1560-01-256-2172 and part number 209-064-224-101, with a required quantity of 12 units to be delivered within 20 days from the contract award date. The item is manufactured using a metal casting process, requiring specialized tooling, and sourcing inquiries must be directed to the appropriate DLA supply chain teams based on application domain. The contract mandates strict adherence to DLA packaging requirements per RP001 and marking standards under MIL-STD-129, with packaging following MIL-STD-2073-1E specifications, including pressurized dry packaging and specific container and palletization protocols. Inspection and acceptance occur at origin, with zero tolerance for non-conformances unless otherwise specified, and sampling must comply with MIL-STD-1916 or equivalent zero-based plans, assigning verification levels based on attribute criticality. The contract incorporates technical and quality requirements referenced from the DLA Master List, including cybersecurity compliance at CMMC Level 2, and requires a self-assessment as part of supplier due diligence. Removal of government identification from non-accepted supplies is mandated, and all documentation for source approval must be submitted as required. Delivery is to be shipped FOB origin to the Taiwan Army at Zuo-Ying Ammunition Sub in Kaohsiung, with no variance permitted in quantity. The item is classified as a critical application item, and the contract number SPE4A5-26-T-310V indicates a solicitation issued by the Department of Defense with a response deadline of August 5, 2026. The unit of issue is each (EA), with a total contract value of $12.00, and the point of contact for procurement inquiries is Kay Bates of the ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract pertains to the procurement of one structural plate, item designation PLATE, STRUCTURAL, AI, with NSN 1560-01-395-3505 and part number 372522-15, supplied by Lockheed Martin Corp. The requirement is under solicitation SPE4A5-26-T-311A, with a strict delivery window of five days from order release and delivery points specified at Robins AFB, Georgia, FOB origin. The item must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede commercial standards like ASTM D3951; packaging must adhere to MIL-STD-129 and RP001, using commercial packaging per Fed-Std-313 unless hazardous, in which case TQ requirement IP025 applies. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively. Configuration changes require formal engineering change proposals or variance requests, and all supplied items must remove government identification if rejected. The contractor must meet CMMC Level 2 self-assessment requirements and ensure physical identification and marking per RQ017. The unit of issue is EA, with no tolerance on quantity. Shipment must use traceable freight methods—parcel post is prohibited—and all packaging and labeling must reflect the specified QUP and DLA packaging standards. The required delivery date is July 23, 2026, with the solicitation issued in 2026 and response deadline in August 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIRCRThe contract specifies the procurement of a single structural aircraft plate, part number 520-14949-1, with NSN 1560016649975, under solicitation SPE4A5-26-T-311F. Delivery is required within five days of award, FOB origin, with zero variance in quantity and inspection and acceptance occurring at the destination. The item is designated as a critical application item for The Boeing Company and must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede other standards. Packaging must follow MIL-STD-129 and DLA Packaging Requirements, with hazardous material governed by FED-STD-313 and IP025, and non-hazardous material conforming to ASTM D3951 under DLA’s authority. Palletization and unit packaging are dictated by RP001, and labeling must adhere strictly to specified directives. Sampling for quality verification must align with MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Non-conformances are not permitted in the sample lot unless explicitly allowed. The supplier must satisfy Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and adhere to RQ001 and RQ042 for tailored and non-tailored quality systems, including ISO 9001:2015. Item Unique Identification is waived per customer request, and government identification must be removed from non-accepted supplies. Shipment must use the fastest traceable method, excluding parcel post, and be delivered to Tinker AFB, Oklahoma. The required delivery date is July 20, 2026, and point of contact is Jackayla Pendergast at DLA. All documentation, compliance, and logistical instructions are binding under DoD procurement directives.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, STRUCTURALThe contract pertains to the procurement of a structural bracket, identified by part number 74A328130-2003 and NSN 1560017060621, with a quantity of two units to be delivered within 164 days under solicitation SPE4A6-26-T-09ZB. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards, including ASTM D3951. Packaging must comply with DLA-specific guidelines under RP001, including MIL-STD-129 for marking and labeling, and FED-STD-313 for hazardous material handling, with non-hazardous items to be commercially packaged per ASTM D3951 only if not overridden by DLA requirements. Palletization and unit of issue are strictly defined, and the delivery point is FOB origin with inspection and acceptance occurring at destination. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Configuration changes require formal engineering change proposals, and all items must be physically marked in accordance with RQ017. Measuring and test equipment used must meet RT001 criteria, and covered defense information under RD002 must be safeguarded. The required delivery date is August 20, 2027, with a needed ship date of January 17, 2027. The contract is issued under a federal procurement system, with Northrop Grumman Systems Corporation as the supplier, and performance is directed to the DLA Distribution Site in Tracy, CA.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and NIST SP 800-171 Assessment SupportThe contract requires support for conducting NIST SP 800-171 assessments at Medium and High impact levels to ensure compliance with CMMC Level 2 requirements for protecting controlled unclassified information. The work involves evaluating systems and processes against the security controls outlined in NIST SP 800-171, identifying gaps, and implementing remediation measures as needed. All assessment findings must be documented and submitted to the Supplier Performance Risk System to validate cybersecurity readiness and maintain eligibility for DoD contracts. The scope is focused exclusively on cybersecurity compliance activities tied to safeguarding sensitive information and does not include hardware, software procurement, or general IT services. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with a solicitation closing on August 27, 2026. The North American Industry Classification System code 541512 indicates the work falls under computer systems design and related services. Performance is expected to support federal cybersecurity mandates without requiring physical presence at a specific location, as no place of performance details are provided. The contracting activity seeks qualified entities capable of delivering accurate, timely assessments that align with federal standards and can be validated through official DoD reporting channels.
Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541611
New
DIBBS
Export Compliance and Technical Data ControlThis contract requires strict management of ITAR- and EAR-controlled technical data to prevent unauthorized disclosure and ensure full compliance with DFARS 252.225-7048 and the US/Canada Joint Certification Program. The subcontractor must implement robust controls to safeguard sensitive technical information throughout its lifecycle, including handling, storage, transmission, and access, adhering to federal export control regulations. Compliance is non-negotiable and applies to all personnel and systems involved in handling controlled data under this agreement. Performance will be conducted under the auspices of the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 27, 2026. The effort falls under NAICS code 541611, indicating it involves administrative management and general management consulting services tied to compliance operations. The subcontractor is expected to maintain documented procedures, conduct regular audits, and demonstrate ongoing adherence to export control requirements, ensuring no unapproved transfer of technical data occurs domestically or internationally.
Administrative Management and General Management Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging, Marking, and PreservationThis contract requires the package, preserve, and label duct assemblies in full compliance with MIL-STD-129 and DLA RP001 standards, ensuring all items are properly barcoded, configured in unit packs, and protected against corrosion for secure shipment. The work involves precise adherence to military packaging protocols, including marking, labeling, and corrosion prevention measures to maintain integrity during transport and storage. All activities must meet stringent Department of Defense requirements for accountability, traceability, and readiness. The solicitation is classified as a subcontract under NAICS code 561910, with a response deadline of August 27, 2026, and was posted on July 28, 2026. The contracting activity falls under the Agency for Sustainment Command Supplier Operations, AE and AF Division, operating within the Department of Defense. While specific performance location and point of contact details are not provided, the work is tied to federal military logistics and supply chain operations, requiring certified capabilities in defense-related packaging and preservation. Interested parties must submit proposals through the designated DIBBS portal prior to the stated deadline.
Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Source Inspection ServicesThe contract requires comprehensive quality assurance and source inspection services to ensure all supplied materials and components strictly adhere to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformance acceptance criteria as mandated by the Defense Logistics Agency. Inspections must be conducted both during production and at final delivery to verify that every item meets the rigorous military standards and maintains an absolute absence of defects. This subcontract is part of a broader Department of Defense initiative under the ASC SUPPLIER OPER AE AND AF DIV and is assigned the NAICS code 541330 for professional, scientific, and technical services related to quality control. The offeror must be prepared to execute inspections at various points in the supply chain with precision and documentation rigor to meet the zero-tolerance compliance requirements. Proposals are due by August 27, 2026, and the work will support critical defense logistics operations, emphasizing reliability and adherence to federal quality benchmarks.
Engineering Services

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332812
New
DIBBS
Precision Machining and Fabrication of Oil Cooler Duct AssemblyThe contract calls for the manufacture of a precision duct assembly designed for use in an oil cooler system, requiring advanced metal forming, welding, and precision machining techniques to meet exacting performance standards. All fabrication processes must comply with stringent military specifications, ensuring structural integrity, dimensional accuracy, and operational reliability under demanding environmental conditions. Full traceability of materials and processes is mandated, with documentation required to verify compliance at every stage of production, from raw material sourcing through final inspection and delivery. The work is classified as a subcontract under NAICS code 332812, directed by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV, with a bid deadline of August 27, 2026. The contract emphasizes adherence to defense-grade quality controls and the ability to demonstrate compliance with applicable military standards, though the specific place of performance and point of contact are not detailed. Suppliers must possess the engineering capability and quality systems necessary to support defense-level traceability and documentation requirements without deviation.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332119
New
DIBBS
SPACER, STRAIGHTThe contract specifies the procurement of five straight spacers identified by NSN 5365-01-670-7905 and part number 92510A810 from McMaster-Carr Supply Company, with a unit price of five dollars per item and a total contract value of twenty-five dollars. Delivery is required within twenty days to the destination FPO AE 09577 aboard the USS LABOON DDG 58, with FOB destination terms, zero quantity variance allowed, and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129 without special markings, and palletization must follow DLA packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. The shipment must be made using the fastest traceable means, prohibiting parcel post, and must reference DLA procedural notes for transportation logistics. The original delivery deadline is July 22, 2026, and all requirements are issued under solicitation SPE4A7-26-T-597T by the Department of Defense, with point of contact Channon Dillard at DLA.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, INTERFACE AIRCThis contract pertains to the procurement of four units of a seal interface for a 25 mm gunport and mount, designated by NSN 1560-01-388-9484 and part number LE261-0122-0005, sourced from SEAL SCIENCE, INC. and RUBBERCRAFT CORPORATION OF CALIFORNIA. The item is classified as a critical application component and must comply with all applicable technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Mandatory standards include MIL-STD-1916 or ASQ H1331 for sampling with zero non-conformances required unless otherwise specified, and verified attributes must adhere to specific verification levels or AQLs. Packaging must follow DLA requirements RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and IP025, while non-hazardous items must meet ASTM D3951, though DLA requirements override any conflicting commercial standards. The delivery is FOB origin with a firm fixed price and no variance allowed in quantity, and inspection and acceptance occur at the manufacturer’s facility. The item is not subject to Item Unique Identification as per customer request, though physical marking per RQ017 is required. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and documentation for source approval must be submitted per RC001. Delivery is due 330 days after award, with all shipments directed to DLA Distribution Warner Robbins, Georgia. The contract is issued under solicitation SPE4A7-26-Q-0894, with a response deadline in August 2026 and a required delivery date of September 25, 2027. The contract specifies detailed handling for packing and labeling and references transportation protocols per DLAD proc notes, with the DLA as the contracting authority and Shenita Tirado as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336419
New
DIBBS
COVER, ACCESS, AIRCRAThe contract pertains to the procurement of one access cover for aircraft, identified by NSN 1560-00-811-2903, under solicitation SPE4A7-26-Q-0899, with a response deadline of August 7, 2026, and a delivery requirement of 250 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item involves technical data subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the United States, and binding U.S. companies and their foreign subsidiaries. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training on handling export-controlled technical data, and approved completion of the DLA Export-Controlled Technical Data Questionnaire. The contracting activity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen listed as the primary point of contact, and the performance location remains unspecified but is governed under U.S. federal procurement protocols.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
FITTING, ORIFICE, TIPThe item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333, and delivery must be completed within 44 days after order date. The solicitation, identified as SPE4A7-26-Q-0895, was posted on July 28, 2026, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. The technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, as well as foreign national employees. Access to the controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have successfully submitted and been approved for the DLA Export-Controlled Technical Data Questionnaire. The point of contact for inquiries is NYA Currie, reachable via email and phone provided.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREADThe contract pertains to the procurement of 432 units of a machine thread plug with NSN 5365-01-035-4899 under solicitation SPE4A7-26-Q-0906, with a delivery requirement of 160 days after award. Technical data associated with this item is subject to export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning any disclosure to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory DLA training on handling export-controlled technical data, and have been formally authorized by DLA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Mykhara Robinson as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
PRODUCTION LOT TESTINGThe contract is for the procurement of 46 piston hydraulic accumulators with NSN 0001S00000062 under solicitation SPE4A7-26-Q-0901, with a delivery requirement of 134 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contractor must comply with stringent documentation standards including a Source Approval Request, DLA packaging specifications, and tailored higher-level quality requirements for both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and government identification must be removed from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval from DLA may access this controlled data, as mandated by DFARS 252.225-7048. The contract is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Destiny Stevenson as the primary point of contact, and responses are due by August 11, 2026.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
DIBBS
BRACKET, FEED TUBEThe item is a BRACKET, FEED TUBE with NSN 5342-01-128-1745, quantity of 32 units, under purchase request 7015852934, with a delivery requirement of 140 days after date of award. The solicitation number is SPE4A7-26-Q-0900, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 5, 2026, and a posting date of July 28, 2026. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, restricting its disclosure to foreign persons regardless of location and applying equally to foreign national employees and subsidiaries of U.S. companies. DFARS 252.225-7048 governs the handling of this controlled data. Contractors must hold an approved U.S./Canada Joint Certification Program certification, complete mandatory DLA training on handling export-controlled technical data, and submit the DLA Export-Controlled Technical Data Questionnaire to gain authorized access. Distribution is limited exclusively to DLA contractors who have received formal approval from the DLA controlling authority.
Machine Shops

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details