Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COVER, ACCESS

Active
SPE7L4-26-U-0954Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of COVER, ACCESS with NSN 5340-01-314-5602, totaling 801 units, under solicitation SPE7L4-26-U-0954, which is open for full and open competition. Delivery is required within 143 days after contract award, and responses must be submitted by July 27, 2026. The procurement is governed by stringent cybersecurity and export control requirements, including mandatory CMMC Level 2 certification for the offering organization, as well as adherence to DLA’s technical and quality standards referenced in the Master List. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, even within the United States, and requires contractors to possess valid US/Canada Joint Certification Program credentials, complete mandatory DOD export control training, and receive formal approval from DLA to access controlled data. DFARS 252.225-7048 applies to safeguarding this technical information. The contractor must comply with DLA packaging standards and protocols for removal of government identification from non-accepted supplies. Drawings are accessible only during the open solicitation period via the DIBBS portal, and the primary point of contact for inquiries is Heather Kessler at the Department of Defense’s LSO Combat Vehicles and Armament office.

General Info

Supply 801 COVER ACCESS units by July 27, 2026, with CMMC Level 2, ITAR/EAR compliance, and DLA packaging standards.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L4-26-U-0954 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
HEATHER KESSLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COVER,ACCESS
COVER,ACCESS
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-314-5602 Quantity: 801 EA Purchase Request: 1000236864QTY: 801 Delivery: 143 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
CASTER, SWIVELThe contract specifies the procurement of a swivel caster, identified by NSN 5340-01-511-7402, with a quantity of one unit and a delivery requirement of 20 days ADO. The solicitation is governed by SPE7L1-26-T-825G and incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions effective based on the solicitation issue date or award date, depending on acquisition size. Manufacturing may involve casting or forging processes, and if the government lacks the necessary tooling, suppliers must seek assistance through the designated DLA casting and forging portal. The item must comply with MIL-STD-130N for identification marking and be manufactured to the current revision of the applicable part standard, with past revisions still acceptable for previously produced hardware. Packaging must meet DLA requirements, and any non-accepted supplies must have government identification removed. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware, except in functional applications such as batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise stated, with attribute identification levels assigned as VII for critical, IV for major, and II for minor characteristics. The procurement is fully competitive under a military or federal specification, with the solicitation posted on July 12, 2026, and responses due by July 23, 2026, coordinated through the DLA Land Supply Chain organization.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLEThe contract pertains to the procurement of 59 units of BRACKET, ANGLE with NSN 5340-01-123-6831 under solicitation SPE7L1-26-T-827K, issued by the Department of Defense’s Land Supply Chain. The item is subject to multiple technical, quality, and compliance requirements embedded through the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must conform to DLA standards, and the contractor must be certified under the Cybersecurity Maturity Model Certification (CMMC) Level 2 by an accredited third-party assessment organization. Technical data associated with this item is controlled under ITAR or EAR, restricting its export or disclosure to foreign persons, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The delivery deadline is 165 days after order, with performance location specified as Anniston, Alabama, 36201-4199. The solicitation was posted on July 12, 2026, with responses due by July 23, 2026, and the NAICS code is 332510 for forging, stamping, and pressing. Primary point of contact is Michael Nordahl at DLA’s FLBC2PRS office.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThis contract, issued under solicitation SPE4A6-26-T-05JT for the procurement of 553 units of PIN, STRAIGHT, HEADED with NSN 5315-01-096-9169, mandates stringent quality verification processes including first article testing and production lot testing. The contractor is required to test one unit of the specified item and submit a detailed first article test report within 90 calendar days of contract award, providing written notice at least 14 days prior to shipment for government inspection. The contracting officer will issue written approval, conditional approval, or disapproval within 30 days of receiving the report. Post-approval, production lot testing is required, during which the Quality Assurance Representative will randomly select one sample from the production batch for destructive testing. The contractor must fund the cost of all samples consumed during testing and provide 14 days’ notice before presenting the lot for sample selection. Samples must be shipped via traceable means to the Redstone Technical Test Center with specific labeling, documentation including signed DD Forms 1222 and 250, test results, certifications, drawings, and a prepaid return label for the samples. All shipments must comply with MIL STD 129 and include documentation for government testing, which may extend up to 180 days total. Fast Pay is not applicable, and the delivery deadline is set at 703 days after contract award.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAININGThe contract pertains to the procurement of a retaining strap identified by NSN 5340-01-547-5491, with a quantity of one unit requested under Purchase Request 7017443865. The solicitation is issued under reference number SPE7L1-26-T-825L by the Defense Logistics Agency, a component of the Department of Defense, and is categorized as a federal procurement. The solicitation was posted on July 12, 2026, and requires responses no later than July 23, 2026. There is no specified set-aside type or NAICS code associated with this solicitation. All performance and delivery details are not explicitly defined beyond the federal context. Interested parties can access further information via the provided DIBBS portal link.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSHThe contract pertains to the procurement of 556 units of the commercial item identified by part number ST9M429P071C252 and NSN 5340-00-354-6035, labeled as CATCH, FLUSH, under solicitation SPE7L1-26-T-827H. The delivery is required within 107 days of award, with performance located at Robins AFB, Georgia. The item is classified as a commercial item and must comply with stringent technical, quality, and cybersecurity requirements, including CMMC Level 2 self-assessment and adherence to Covered Defense Information protocols. The contractor must follow MIL-STD-130N for identification marking and is prohibited from using Class I ozone-depleting chemicals in any component, replacing them only with approved substitutes. Sampling and inspection must conform to MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, with attributes assigned specific verification levels or AQLs. Packaging must meet DLA standards, and any government identification on rejected items must be removed. The contract incorporates technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. All submissions must be made through the designated DLA portal, with inquiries directed to the primary point of contact, Michael Nordahl.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details