Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

COVER, BASE PLATE

Awarded

SPE7M126P2983Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Contract SPE7M126P2983 was awarded by the Defense Logistics Agency under the Department of Defense to American Defense Components, LLC for the procurement of base plate covers, identified by NSN 1710000569404. The award was posted on the DIBBS platform with an award date of October 19, 2026. However, subsequent administrative action via Modification P00001, issued by the DLA Weapons Support Maritime Supply Chain, resulted in the complete withdrawal of the purchase order. CLIN 0001 was cancelled at no cost to the government because the order exceeded its expected delivery date and the offer revival extension had expired. Consequently, the total contract value was decreased from 7,953.76 dollars to 0.00 dollars.

General Info

DLA cancelled contract SPE7M126P2983 with American Defense Components, LLC at no cost.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

1

modification

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedOct 19

Award Notice

AwardedOct 31

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE7M126P2983 posted on DIBBS. Awardee: AMERICAN DEFENSE COMPONENTS, LLC (CAGE 4U6M9) Total Contract Price: See Award Doc Award Date: 10-19-2026 Line items: - COVER, BASE PLATE (NSN/Part 1710000569404)

Similar Contracts

Same NAICS industry code

Specialized Plumbing and Manifold InstallationThis subcontract for Specialized Plumbing and Manifold Installation involves the supply and installation of fluid handling systems for prime contractors working on Mississippi Forestry Commission projects. The scope of work focuses on the fabrication and installation of TIG-welded stainless-steel manifolds and plumbing, specifically utilizing Grade 5 stainless steel hardware. To ensure quality and compliance, the contractor must hold TIG welding certification and provide manufacturer warranties for both the tank and the pump. The final deliverables consist of fully installed plumbing and manifold systems provided on a per-bed basis. This opportunity was posted on October 30, 2026, with a response deadline of November 16, 2026. The project falls under NAICS code 332999 and is managed through the state of Mississippi.

MS FORESTRY COMMISSION

POSTED

about 9 hours ago

DEADLINE

Payload Release & Cargo Handling System SupplierThis subcontract with the Department of the Navy involves the supply and installation of payload attachment and detachment mechanisms for prime contractors working on NAVAIR TRUAS Increment II projects. The scope of work requires the design and integration of systems capable of manually or automatically detaching payloads weighing between 100 and 150 lbs during flight. The selected supplier must ensure that the delivered payload release mechanism or cargo hook system is fully compatible with the UAS airframe and meets the requirements for the specified weight classes. This effort falls under NAICS code 332999 and supports the broader goals of the TRUAS Increment II cargo UAS industry demonstration.

Department Of The Navy

POSTED

about 9 hours ago

DEADLINE

Supply of Marine Hatches (NSN: 2040-01-357-9117)This subcontract, issued by the Department of Defense under Land Supplier Operations SMSG, requires the provision of 20 marine hatches manufactured or sourced according to NSN 2040-01-357-9117 specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 332999 and is intended for prime contractors supporting DLA supply contracts. Key technical requirements include marking each unit with a Unique Item Identifier using two-dimensional data matrix symbology. The supplier must also provide comprehensive Material Inspection and Receiving Reports that include both the UID and corresponding lot numbers for all 20 delivered units.

LAND SUPPLIER OPERATIONS SMSG

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Annular Ball Bearing ManufacturerThis subcontract involves the manufacture of precision annular ball bearings, specifically Part Number 3151-252, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production process must strictly adhere to source-controlled requirements, limited rights data, and MIL-DTL-197M preservation standards. To qualify, the manufacturer must possess specialized precision bearing machining and grinding equipment and maintain ISO 9001:2015 certification along with a CMMC Level 2 self-assessment. The contract is categorized under NAICS code 332999 and requires finished bearings to be delivered FOB Destination. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Precision Manufacturing of Valve Disks (PN 4820-01-281-9674)This subcontract involves the precision manufacturing of two Valve Disks, part number 4820-01-281-9674, for prime contractors supporting DLA Distribution San Joaquin hardware projects. The fabrication process must strictly adhere to TDP Rev A Gen 1 and meet the quality and inspection standards outlined in MIL-STD-1330E. Due to the technical nature of the components, the work requires the use of specialized metal forming equipment or precision CNC machining. The contractor is required to comply with DFARS 252.204-7012 to ensure the proper safeguarding of covered defense information. The project falls under NAICS code 332999 and is performed within the 95304-5000 zip code area. Interested parties must submit their responses by November 7, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

Gasket Supply (NSN 5330-01-677-5529)This subcontract involves the supply of 79 asbestos-free gaskets under NSN 5330-01-677-5529 for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is responsible for manufacturing or sourcing the gaskets according to technical drawings, conducting Product Verification Testing, and providing all necessary material certifications and process operation sheets. Strict adherence to military standards is required for the final delivery, including packaging in waterproof, greaseproof, opaque bags per MIL-DTL-117 and marking shipments according to MIL-STD-129 and MIL-STD-2073-1E. The performance of this contract is centered in New Cumberland, Pennsylvania, with the final delivery consisting of the 79 gaskets accompanied by the required certifications and drawings.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

LAP ASSEMBLY (PN: 1650-01-315-1701) SupplierThis subcontract, issued by the DLA Weapons Support Fluid Handling Division under the Department of Defense, requires the fabrication and assembly of 11 units of LAP ASSEMBLY (PN: 1650-01-315-1701). The selected supplier must ensure all components meet strict technical specifications, with quality assurance and testing conducted in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor is responsible for packaging and marking the assemblies according to ASTM D3951 and MIL-STD-129 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999. To be eligible, the supplier must maintain CMMC Level 2 compliance and adhere to the Buy American Act. The performance of the contract will take place in zip code 32212-0103, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

GRILLE, RADIATOR, VEHICU

Solicitation # SPE7L3-27-U-0024

Solicitation SPE7L3-27-U-0024 is a Request for Quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of vehicular radiator grilles, specifically NSN 2510-01-576-5277 and Daimler Truck North America part number A17-20035-000. This is a Total Small Business Set-Aside with a maximum contract value of 350,000.00 dollars. The requirement is for an estimated quantity of 12 units, with a delivery window of 41 days after order. Shipping is FOB Origin, while both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List Technical and Quality Requirements and RP001 palletization guidelines taking precedence. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Quotations must be submitted via the DLA Internet Bid Board System by October 30, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

HINGE, DOOR, VEHICULAR

Solicitation # SPE7L3-27-U-0026

Solicitation SPE7L3-27-U-0026 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of vehicular door hinges, specifically NSN 2510-01-576-6278, part number WWS 50036-3420 from Daimler Truck North America LLC. This is a total small business set-aside under NAICS code 332999, intended to result in a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. The estimated annual demand is 9 units, with a required delivery timeline of 88 days after order. Delivery is FOB Origin, while both inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Environmental restrictions prohibit the use of Class I Ozone Depleting Chemicals in any delivered items. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Award will be based on the price quoted for the estimated annual demand, and all quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-0995

Solicitation SPE7M4-27-T-0995, issued by the DLA Weapons Support Fluid Handling Division, is a request for the procurement of seven nonmetallic hose assemblies under NSN 4720-01-624-3871. The contract specifies a delivery period of 164 days, with a need ship date of April 6, 2027, and an original required delivery date of May 7, 2027. Delivery is set as FOB Origin, with the destination for both inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and includes strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Key technical requirements include the removal of government identification from non-accepted supplies and a general prohibition on the use of mercury or mercury-containing compounds, per NAVSEA 5100-003D. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and the HUBZone price evaluation preference. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M5-27-U-0012

Solicitation SPE7M5-27-U-0012 is a total small business set-aside issued by the DLA Weapons Support Active Devices Division for the procurement of nonmetallic hose assemblies, specifically NSN 4720014813754 and Daimler Truck North America LLC part number A12-16463-001. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 91 units. Quotations are due by October 30, 2026, with price serving as the primary evaluation factor for award. The contract requires delivery within 57 days after order, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List technical and quality requirements take precedence. Palletization must follow RP001 standards. The contractor is prohibited from using additive manufacturing unless authorized and must utilize the Wide Area WorkFlow system for electronic invoicing and receiving reports. Key regulatory compliance includes the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

JACK, ROOF LIFTING

Solicitation # SPE3SE-27-Q-0065

Solicitation SPE3SE-27-Q-0065 is a firm fixed price request for the procurement of 20 roof lifting jacks, identified by NSN 7360-01-247-2367. The requirement is split into two line items of 10 units each, designed to raise the roof of trailer-mounted field kitchens from transportable to operational mode. The items must conform to specific technical drawings, primarily basic drawing 81337 5-13-4600 Revision J, and various reference drawings. Delivery is required within 30 days after the date of order, with shipping terms set as FOB Destination to locations in Canada, specifically 25 CFSD Montreal and 7 CFSD Edmonton. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items may involve hazardous materials, compliance with IP025 and FAR 52.223-3 is required, including the submission of safety data sheets. Administrative requirements include registration in the System for Award Management and the use of the Wide Area Workflow for invoicing and receiving reports. This is not a small business set-aside, and quotations must be submitted to the DLA Troop Support Subsistence FSE Supply Chain office by November 5, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Battery Testing and Certification ServicesThis subcontract for Battery Testing and Certification Services, issued by the Defense Logistics Agency under the Department of Defense, requires the performance of First Article Testing and Government Production Lot Testing for prime contractors. The selected provider will be responsible for validating assemblies in accordance with QAP 81337 11-1-9487 and preparing DD1222 forms for submission to the U.S. Army Combat Capabilities Development Command. Deliverables include certified test reports and samples, with a strict requirement for ISO 9001 quality management certification. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 2, 2026. This contract ensures that critical battery components meet rigorous military specifications and quality standards before being integrated into the supply chain.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

HAZMAT Packaging and LogisticsThis SBA Total Small Business Set-Aside subcontract involves providing specialized packaging, marking, and transportation services for battery assemblies supporting Defense Logistics Agency supply contracts. The contractor is responsible for ensuring all packaging and marking adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards, while also preparing necessary HAZDEC certifications. Final delivery of the processed assemblies is required at DMO Camp Kinser, Japan. To qualify for this performance, the contractor must maintain IP025 HAZMAT certification and strictly comply with 29 CFR 1910.1200 safety regulations. The project falls under NAICS code 562112 and is managed through the Department of Defense.

Hazardous Waste Collection

POSTED

about 10 hours ago

DEADLINE

Critical Safety Battery Assembly ServicesThis subcontract for Critical Safety Battery Assembly Services involves the physical assembly of battery units for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes the integration of cells, wiring, and housing in strict accordance with Reference Drawing NR 81337 11-1-9467 and QAP 81337 11-1-9487 to deliver completed Battery Assemblies under NSN 6140-01-609-7775. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335910. Due to the nature of the work, the contractor must maintain CMMC Level 2 certification for the handling of Covered Defense Information and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on October 30, 2026, with a response deadline of November 2, 2026.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

Li-Ion Battery Cell SupplyThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the manufacture and supply of high-grade Lithium-Ion battery cells for prime contractors. The cells must be produced in accordance with TDP Rev B Gen 4 specifications and must be free of intentionally added mercury as per NAVSEA 5000-003D. The selected provider is required to deliver comprehensive material certifications and quality documentation to ensure all technical standards are met. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335911. Strict adherence to ITAR and EAR compliance is mandatory, and the supplier must hold HAZDEC certification. Interested parties must submit their responses by November 2, 2026, to provide certified battery cells that meet these rigorous defense requirements.

Storage Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

Military-Grade Oxygen Component PackagingThis subcontract involves the specialized packaging, marking, and sealing of oxygen-cleaned components to support prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work requires strict adherence to IP042 oxygen clean packaging standards, MIL-STD-2073-1E, and RP001 DLA requirements, specifically utilizing non-outgassing materials to ensure component integrity. Additionally, all items must be marked in accordance with MIL-STD-129. The primary objective is the delivery of packaged valves prepared for international shipment to Maestranza Aerea de Madrid. This effort is managed under the Department of Defense through the Defense Logistics Agency, with a response deadline of November 7, 2026.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

MIL-STD-1330D Oxygen Cleaning ServicesThis subcontract for the Defense Logistics Agency involves providing specialized cleaning and drying services for oxygen system components. The primary objective is to support prime contractors by ensuring all components are free of hydrocarbons and contaminants to prevent combustion in high-pressure environments. All work must be executed within certified oxygen-cleaning facilities using approved solvents in strict accordance with MIL-STD-1330D standards. The project falls under NAICS code 811310 and requires the delivery of certified Oxygen Clean components. Interested parties should note the response deadline of November 7, 2026, for this Department of Defense requirement.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

Oxygen System Check Valve SupplierThis subcontract through the Defense Logistics Agency involves the supply of two 1/4 inch check valves intended for prime contractors supporting Spanish Air Force supply contracts. The required components must meet NSN 4820-00-232-7570 specifications, specifically referencing manufacturer part number 2192-502-007-1 from Mission Systems Orchard Park Inc. Technical requirements mandate that the valves be constructed from high-pressure oxygen-compatible materials capable of supporting a maximum operating pressure of 500 PSI. The solicitation was posted on October 30, 2026, with a response deadline of November 7, 2026, falling under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

SWITCH, RADIO FREQUENCY

Solicitation # SPE7M5-27-Q-0121

POSTED

about 10 hours ago

DEADLINE

VALVE, CHECK, OXYGEN SYS

Solicitation # SPE7MC-27-Q-0041

Solicitation SPE7MC-27-Q-0041 is a small business set-aside for the procurement of two 1/4 inch check valves for oxygen systems, identified by NSN 4820-00-232-7570. These critical application items must support a maximum operating pressure of 500 PSI and are specified as part number 2192-502-007-1 from Mission Systems Orchard Park Inc. The contract is established as a firm fixed price award with a delivery timeline of 147 days after order. The final destination for these supplies is the Spanish Air Force at Maestranza Aerea de Madrid in Spain, with both inspection and acceptance occurring at the destination. The contractor must adhere to stringent technical and quality standards, including cleaning and drying requirements per MIL-STD-1330D for oxygen cleaned items and compliance with IP042 oxygen clean packaging and marking requirements. Packaging must follow MIL-STD-2073-1E and RP001 DLA packaging requirements, while marking must align with MIL-STD-129. Award decisions will be based on best value, evaluating price, offered delivery, and past performance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic origin, and hazardous material labeling.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0125

Solicitation SPE8E4-27-T-0125 is a total small business set-aside issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of 51 feet of metal bar. The material is specified as Steel Comp M2, hot rolled or forged, round and annealed, with a 6.000 inch diameter and a weight of 105.740 lb/ft. The bars must be supplied in whole foot lengths between 6 and 12 feet. This is a Foreign Military Sale requirement for delivery to the Parts-Attach General Depot in Tainan City, Taiwan, with a required delivery date of October 8, 2026, and a delivery window of 20 days after order. The contract mandates strict adherence to quality and technical standards, including ASTM A600-92A and QAP 13873. A Certificate of Quality Compliance is required for every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. Packaging and marking must comply with MIL-STD-129, MIL-STD-163, MIL-STD-2073-1E, and ASTM A700, with specific requirements for continuous identification markings including the contract delivery order number, NSN, and manufacturer details. Inspection and acceptance will occur at the point of origin. Payment and receiving reports must be processed electronically via Wide Area WorkFlow.

Iron and Steel Forging

POSTED

about 10 hours ago

DEADLINE

CLEANING KIT, GUN

Solicitation # SPE7L7-27-T-0313

Solicitation SPE7L7-27-T-0313 is a fixed-price procurement issued by the Defense Logistics Agency for two gun cleaning kits under NSN 1005-01-728-6872. This item is classified as a critical gun part with unique requirements, necessitating adherence to specific basic and reference drawings. The contract requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, and product inspection will be conducted by the DCMA QAR at the manufacturer's facility. Delivery is required within 20 days after receipt of order, with an original required delivery date of September 15, 2025. The procurement includes stringent quality and security mandates, including CMMC Level 2 self-assessment and third-party assessment requirements. Technical data is subject to ITAR or EAR export controls, restricting distribution to approved contractors. Packaging and marking must follow MIL-STD-2073-1 Appendix D and MIL-STD-129, while palletization must align with DLA requirement RP001. The solicitation offers a price evaluation preference for certified HUBZone small businesses and prohibits the use of additive manufacturing unless specifically authorized. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 10 hours ago

DEADLINE

WAVEGUIDE ASSEMBLY

Solicitation # SPE7M5-27-Q-0107

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS